Further cleanup and enable multiplat build
cover Further cleanup and enable multiplat build
This series is based on latest linux-next and depends on the following patches:
ARM: EXYNOS: Consolidate Kconfig entries
http://article.gmane.org/gmane.linux.kernel.samsung-soc/28642
Currently cpufreq driver build support has been disabled for multiplatform for Exynos until the generic CPUfreq driver support for Exynos gets merged. This (disabling) patch is available in PM tree.
http://www.spinics.net/lists/cpufreq/msg09693.html
Tested on Exynos4210, 4412, 5250 and 5420 based boards.
Arnd Bergmann (1):
ARM: EXYNOS: Enable multi-platform build support
Sachin Kamat (5):
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: Staticize exynos_subsys
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: multi_v7_defconfig: Enable Exynos platform
arch/arm/Kconfig | 27 ++--------- arch/arm/configs/exynos_defconfig | 2 +- arch/arm/configs/multi_v7_defconfig | 10 +++++ arch/arm/mach-exynos/Kconfig | 27 +++++++++++ arch/arm/mach-exynos/Makefile | 9 ++-- arch/arm/mach-exynos/common.h | 72 ++++++++++++++++++++++++++++++ arch/arm/mach-exynos/cpuidle.c | 1 - arch/arm/mach-exynos/exynos.c | 4 +- arch/arm/mach-exynos/hotplug.c | 2 - arch/arm/mach-exynos/platsmp.c | 2 - arch/arm/mach-exynos/pm.c | 1 - arch/arm/mach-exynos/pmu.c | 2 - arch/arm/plat-samsung/Makefile | 3 ++ arch/arm/plat-samsung/include/plat/cpu.h | 61 ------------------------- 14 files changed, 120 insertions(+), 103 deletions(-)
Signature · 1 line
1.7.9.5
PATCH 1/6 ARM: EXYNOS: Remove duplicate lines in Makefile
Group all files compiled under common config option together.
--- arch/arm/mach-exynos/Makefile | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
arch/arm/mach-exynos/Makefile +1 -6
@@ -12,20 +12,15 @@ obj- := # Core -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o -obj-$(CONFIG_ARCH_EXYNOS) += pmu.o - obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_ARCH_EXYNOS) += exynos-smc.o -obj-$(CONFIG_ARCH_EXYNOS) += firmware.o - plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
Signature · 1 line
1.7.9.5
PATCH 2/6 ARM: EXYNOS: Staticize exynos_subsys
In reply to Sachin Kamat'exynos_subsys' is now local to this file. Make it static and remove the declaration from header file.
--- arch/arm/mach-exynos/exynos.c | 2 +- arch/arm/plat-samsung/include/plat/cpu.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)
arch/arm/mach-exynos/exynos.c +1 -1
@@ -284,7 +284,7 @@ void __init exynos_init_io(void)of_scan_flat_dt (exynos_fdt_map_sysram,NULL ); } -struct bus_type exynos_subsys = { +static struct bus_type exynos_subsys = { .name ="exynos-core" , .dev_name ="exynos-core" , };
arch/arm/plat-samsung/include/plat/cpu.h +0 -1
@@ -239,7 +239,6 @@ extern struct bus_type s3c2443_subsys;extern struct bus_type s3c6410_subsys;extern struct bus_type s5p64x0_subsys;extern struct bus_type s5pv210_subsys; -extern struct bus_type exynos_subsys;extern void (*s5pc1xx_idle)(void );
Signature · 1 line
1.7.9.5
PATCH 2/6 ARM: EXYNOS: Staticize exynos_subsys
Hi Sachin,
Quoted 28 lines · Sachin Kamat
'
exynos_subsys' is now local to this file. Make it static and remove the declaration from header file.Signed-off-by Sachin Kamat <[email protected]>--- arch/arm/mach-exynos/exynos.c | 2 +- arch/arm/plat-samsung/include/plat/cpu.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)arch/arm/mach-exynos/exynos.c +1
-1@@ -284,7 +284,7 @@ void __init exynos_init_io(void)of_scan_flat_dt (exynos_fdt_map_sysram,NULL ); } -struct bus_type exynos_subsys = { +static struct bus_type exynos_subsys = { .name ="exynos-core" , .dev_name ="exynos-core" , };arch/arm/plat-samsung/include/plat/cpu.h +0
-0
arch/arm/plat-samsung/include/plat/cpu.h extern struct bus_type s3c2443_subsys; · line 244
Quoted 7 lines
arch/arm/plat-samsung/include/plat/cpu.h +0
-1@@ -239,7 +239,6 @@ extern struct bus_type s3c2443_subsys;extern struct bus_type s3c6410_subsys;extern struct bus_type s5p64x0_subsys;extern struct bus_type s5pv210_subsys; -extern struct bus_type exynos_subsys;extern void (*s5pc1xx_idle)(void );
This struct and registration of it do not seem to be needed for anything anymore. Would you consider removing it instead?
Best regards,
Tomasz
PATCH 2/6 ARM: EXYNOS: Staticize exynos_subsys
Hi Tomasz,
Quoted 38 lines · Tomasz Figa
Hi Sachin,
Quoted 34 lines · Sachin Kamat
'
exynos_subsys' is now local to this file. Make it static and remove the declaration from header file.Signed-off-by Sachin Kamat <[email protected]>--- arch/arm/mach-exynos/exynos.c | 2 +- arch/arm/plat-samsung/include/plat/cpu.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)arch/arm/mach-exynos/exynos.c +1
-1@@ -284,7 +284,7 @@ void __init exynos_init_io(void)of_scan_flat_dt (exynos_fdt_map_sysram,NULL ); } -struct bus_type exynos_subsys = { +static struct bus_type exynos_subsys = { .name ="exynos-core" , .dev_name ="exynos-core" , };arch/arm/plat-samsung/include/plat/cpu.h +0
-1@@ -239,7 +239,6 @@ extern struct bus_type s3c2443_subsys;extern struct bus_type s3c6410_subsys;extern struct bus_type s5p64x0_subsys;extern struct bus_type s5pv210_subsys; -extern struct bus_type exynos_subsys;
Quoted 6 lines
arch/arm/plat-samsung/include/plat/cpu.h extern struct bus_type s3c2443_subsys; · line 244
Quoted 3 lines
arch/arm/plat-samsung/include/plat/cpu.h +0
-0extern void (*s5pc1xx_idle)(void );This struct and registration of it do not seem to be needed for anything anymore. Would you consider removing it instead?
I had considered removing that while I was doing other code consolidation of this file. However I found that without this, the system failed to boot. I did not look much into it then. Probably I can revisit it and if it doesn't cause
any boot issue, will remove it.
Signature · 2 lines
With warm regards, Sachin
PATCH 2/6 ARM: EXYNOS: Staticize exynos_subsys
Quoted 48 lines · Sachin Kamat
Hi Tomasz,
Quoted 38 lines · Tomasz Figa
Hi Sachin,
Quoted 34 lines · Sachin Kamat
'
exynos_subsys' is now local to this file. Make it static and remove the declaration from header file.Signed-off-by Sachin Kamat <[email protected]>--- arch/arm/mach-exynos/exynos.c | 2 +- arch/arm/plat-samsung/include/plat/cpu.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)arch/arm/mach-exynos/exynos.c +1
-1@@ -284,7 +284,7 @@ void __init exynos_init_io(void)of_scan_flat_dt (exynos_fdt_map_sysram,NULL ); } -struct bus_type exynos_subsys = { +static struct bus_type exynos_subsys = { .name ="exynos-core" , .dev_name ="exynos-core" , };arch/arm/plat-samsung/include/plat/cpu.h +0
-1@@ -239,7 +239,6 @@ extern struct bus_type s3c2443_subsys;extern struct bus_type s3c6410_subsys;extern struct bus_type s5p64x0_subsys;extern struct bus_type s5pv210_subsys; -extern struct bus_type exynos_subsys;Quoted 6 lines
arch/arm/plat-samsung/include/plat/cpu.h extern struct bus_type s3c2443_subsys; · line 244
Quoted 3 lines
arch/arm/plat-samsung/include/plat/cpu.h +0
-0extern void (*s5pc1xx_idle)(void );This struct and registration of it do not seem to be needed for anything anymore. Would you consider removing it instead?
Quoted 6 lines
I had considered removing that while I was doing other code consolidation of this file. However I found that without this, the system failed to boot. I did not look much into it then. Probably I can revisit it and if it doesn't cause
any boot issue, will remove it.
Hmm, I don't see why it could break anything as I can't find any users of it. Anyway I just tested removing this code on Exynos4412-trats2 board and didn't find any problems.
Best regards,
Tomasz
PATCH 2/6 ARM: EXYNOS: Staticize exynos_subsys
Quoted 62 lines · Tomasz Figa
Quoted 53 lines · Sachin Kamat
Hi Tomasz,
Quoted 41 lines · Tomasz Figa
Hi Sachin,
Quoted 36 lines · Sachin Kamat
'
exynos_subsys' is now local to this file. Make it static and remove the declaration from header file.Signed-off-by Sachin Kamat <[email protected]>--- arch/arm/mach-exynos/exynos.c | 2 +- arch/arm/plat-samsung/include/plat/cpu.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-)arch/arm/mach-exynos/exynos.c +1
-1@@ -284,7 +284,7 @@ void __init exynos_init_io(void)of_scan_flat_dt (exynos_fdt_map_sysram,NULL ); } -struct bus_type exynos_subsys = { +static struct bus_type exynos_subsys = { .name ="exynos-core" , .dev_name ="exynos-core" , };arch/arm/plat-samsung/include/plat/cpu.h +0
-1@@ -239,7 +239,6 @@ extern struct bus_type s3c2443_subsys;extern struct bus_type s3c6410_subsys;extern struct bus_type s5p64x0_subsys;extern struct bus_type s5pv210_subsys; -extern struct bus_type exynos_subsys;Quoted 6 lines
arch/arm/plat-samsung/include/plat/cpu.h extern struct bus_type s3c2443_subsys; · line 244
Quoted 3 lines
arch/arm/plat-samsung/include/plat/cpu.h +0
-0extern void (*s5pc1xx_idle)(void );This struct and registration of it do not seem to be needed for anything anymore. Would you consider removing it instead?
Quoted 7 lines
I had considered removing that while I was doing other code consolidation of this file. However I found that without this, the system failed to boot. I
did not look much into it then. Probably I can revisit it and if it doesn't cause
any boot issue, will remove it.
Quoted 3 lines
Hmm, I don't see why it could break anything as I can't find any users of it. Anyway I just tested removing this code on Exynos4412-trats2 board and didn't find any problems.
Thanks for testing. Let me check at my end on other boards and if it doesn't cause
any problem, will remove this.
Signature · 2 lines
With warm regards, Sachin
PATCH 2/6 ARM: EXYNOS: Staticize exynos_subsys
Hi Tomasz,
Quoted 6 lines · Sachin Kamat
Quoted 5 lines · Tomasz Figa
Quoted 4 lines · Sachin Kamat
Hi Tomasz,
On 10 April 2014 14:47, Tomasz Figa <[email protected]> wrote:
<snip>
Quoted 7 lines
Quoted 3 lines
Hmm, I don't see why it could break anything as I can't find any users of it. Anyway I just tested removing this code on Exynos4412-trats2 board and didn't find any problems.
Thanks for testing. Let me check at my end on other boards and if it doesn't cause
any problem, will remove this.
Tested after removing this code on various boards and there doesn't seem to be any
problems. Will re-send with this change.
Signature · 2 lines
With warm regards, Sachin
PATCH 3/6 ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
In reply to Sachin KamatMove Exynos specific macros to mach-exynos from plat-samsung to avoid unnecessary dependency on plat based header files.
--- arch/arm/mach-exynos/common.h | 72 ++++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/cpu.h | 60 ------------------------- 2 files changed, 72 insertions(+), 60 deletions(-)
arch/arm/mach-exynos/common.h +72 -0
@@ -15,6 +15,75 @@#include <linux/reboot.h> #include <linux/of.h> +#define EXYNOS4210_CPU_ID 0x43210000 +#define EXYNOS4212_CPU_ID 0x43220000 +#define EXYNOS4412_CPU_ID 0xE4412200 +#define EXYNOS4_CPU_MASK 0xFFFE0000 + +#define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5420_SOC_ID 0xE5420000 +#define EXYNOS5440_SOC_ID 0xE5440000 +#define EXYNOS5_SOC_MASK 0xFFFFF000 + +extern unsigned long samsung_cpu_id; + +#define IS_SAMSUNG_CPU (name, id, mask) \ +static inline int is_samsung_##name(void) \ +{ \ + return ((samsung_cpu_id & mask) == (id & mask)); \ +} + +IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) + +#if defined(CONFIG_CPU_EXYNOS4210 ) +# define soc_is_exynos4210 () is_samsung_exynos4210() +#else +# define soc_is_exynos4210 () 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4212 ) +# define soc_is_exynos4212 () is_samsung_exynos4212() +#else +# define soc_is_exynos4212 () 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4412 ) +# define soc_is_exynos4412 () is_samsung_exynos4412() +#else +# define soc_is_exynos4412 () 0 +#endif + +#define EXYNOS4210_REV_0 (0x0) +#define EXYNOS4210_REV_1_0 (0x10) +#define EXYNOS4210_REV_1_1 (0x11) + +#if defined(CONFIG_SOC_EXYNOS5250 ) +# define soc_is_exynos5250 () is_samsung_exynos5250() +#else +# define soc_is_exynos5250 () 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5420 ) +# define soc_is_exynos5420 () is_samsung_exynos5420() +#else +# define soc_is_exynos5420 () 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5440 ) +# define soc_is_exynos5440 () is_samsung_exynos5440() +#else +# define soc_is_exynos5440 () 0 +#endif + +#define soc_is_exynos4 () (soc_is_exynos4210() || soc_is_exynos4212() || \ + soc_is_exynos4412()) +#define soc_is_exynos5 () (soc_is_exynos5250() || soc_is_exynos5420()) +void mct_init (void __iomem *base,int irq_g0,int irq_l0,int irq_l1);struct map_desc ;
@@ -63,4 +132,7 @@ struct exynos_pmu_conf {extern void exynos_sys_powerdown_conf (enum sys_powerdown mode); +extern void s5p_init_cpu (void __iomem *cpuid_addr); +extern unsigned int samsung_rev (void ); +#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
arch/arm/plat-samsung/include/plat/cpu.h +0 -60
78 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH 4/6 ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
In reply to Sachin KamatExynos specific macros and declarations have been moved to mach-exynos. Inclusion of plat/cpu.h is no more necessary.
--- arch/arm/mach-exynos/cpuidle.c | 1 - arch/arm/mach-exynos/exynos.c | 2 -- arch/arm/mach-exynos/hotplug.c | 2 -- arch/arm/mach-exynos/platsmp.c | 2 -- arch/arm/mach-exynos/pm.c | 1 - arch/arm/mach-exynos/pmu.c | 2 -- 6 files changed, 10 deletions(-)
arch/arm/mach-exynos/cpuidle.c +0 -1
@@ -24,7 +24,6 @@#include <asm/unified.h> #include <asm/cpuidle.h> -#include <plat/cpu.h> #include <plat/pm.h> #include <mach/map.h>
arch/arm/mach-exynos/exynos.c +0 -2
@@ -26,8 +26,6 @@#include <asm/mach/map.h> #include <asm/memory.h> -#include <plat/cpu.h> -#include "common.h" #include "mfc.h" #include "regs-pmu.h"
arch/arm/mach-exynos/hotplug.c +0 -2
@@ -19,8 +19,6 @@#include <asm/cp15.h> #include <asm/smp_plat.h> -#include <plat/cpu.h> -#include "common.h" #include "regs-pmu.h"
arch/arm/mach-exynos/platsmp.c +0 -2
@@ -26,8 +26,6 @@#include <asm/smp_scu.h> #include <asm/firmware.h> -#include <plat/cpu.h> -#include "common.h" #include "regs-pmu.h"
arch/arm/mach-exynos/pm.c +0 -1
@@ -26,7 +26,6 @@#include <asm/smp_scu.h> #include <asm/suspend.h> -#include <plat/cpu.h> #include <plat/pm-common.h> #include <plat/pll.h> #include <plat/regs-srom.h>
arch/arm/mach-exynos/pmu.c +0 -2
@@ -13,8 +13,6 @@#include <linux/kernel.h> #include <linux/bug.h> -#include <plat/cpu.h> -#include "common.h" #include "regs-pmu.h"
Signature · 1 line
1.7.9.5
PATCH 5/6 ARM: EXYNOS: Enable multi-platform build support
In reply to Sachin KamatFrom: Arnd Bergmann <[email protected]>
This makes it possible to enable the exynos platform as part of a multiplatform kernel, in addition to keeping the single-platform Exynos support.
sparsemem is currently not supported in multiplatform.
--- arch/arm/Kconfig | 27 +++------------------------ arch/arm/configs/exynos_defconfig | 2 +- arch/arm/mach-exynos/Kconfig | 27 +++++++++++++++++++++++++++ arch/arm/mach-exynos/Makefile | 2 ++ arch/arm/plat-samsung/Makefile | 3 +++ 5 files changed, 36 insertions(+), 25 deletions(-)
arch/arm/Kconfig +3 -24
@@ -828,34 +828,13 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS +config ARCH_EXYNOS_SINGLE bool "Samsung EXYNOS" - select ARCH_HAS_BANDGAP - select ARCH_HAS_CPUFREQ - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB + select ARCH_EXYNOS select ARCH_SPARSEMEM_ENABLE - select ARM_AMBA - select ARM_GIC - select CLKSRC_OF - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU if SMP - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select HAVE_SMP select NEED_MACH_MEMORY_H - select PINCTRL - select PINCTRL_EXYNOS - select PM_GENERIC_DOMAINS if PM_RUNTIME - select S5P_DEV_MFC - select SAMSUNG_DMADEV - select SPARSE_IRQ - select USE_OF help - Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) + Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) config ARCH_DAVINCI bool "TI DaVinci"
arch/arm/configs/exynos_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_EXYNOS_SINGLE=y CONFIG_S3C_LOWLEVEL_UART_PORT=3 CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y
arch/arm/mach-exynos/Kconfig +27 -0
@@ -7,6 +7,33 @@ # Configuration options for the EXYNOS4 +config ARCH_EXYNOS + bool "Samsung EXYNOS" if ARCH_MULTI_V7 + select ARCH_HAS_BANDGAP + select ARCH_HAS_CPUFREQ + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_GIC + select CLKSRC_OF + select COMMON_CLK + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_SMP + select PINCTRL + select PINCTRL_EXYNOS + select PM_GENERIC_DOMAINS if PM_RUNTIME + select S5P_DEV_MFC + select SAMSUNG_DMADEV + select SPARSE_IRQ + select USE_OF + help + Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) + if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support"
arch/arm/mach-exynos/Makefile +2 -0
@@ -5,6 +5,8 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include + obj-y := obj-m := obj-n :=
arch/arm/plat-samsung/Makefile +3 -0
@@ -4,6 +4,9 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include +ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include + obj-y := obj-m := obj-n := dummy.o
Signature · 1 line
1.7.9.5
PATCH 6/6 ARM: multi_v7_defconfig: Enable Exynos platform
In reply to Sachin KamatEnable Exynos platform and its related IPs.
--- arch/arm/configs/multi_v7_defconfig | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/configs/multi_v7_defconfig +10 -0
@@ -47,6 +47,7 @@ CONFIG_ARCH_SPEAR13XX=y CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y +CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y
@@ -71,6 +72,7 @@ CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y CONFIG_SMP=y +CONFIG_NR_CPUS=8 CONFIG_HIGHPTE=y CONFIG_CMA=y CONFIG_ARM_APPENDED_DTB=y
@@ -153,6 +155,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_SIRFSOC=y CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_TEGRA=y
@@ -176,6 +180,7 @@ CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y
@@ -210,6 +215,7 @@ CONFIG_MFD_AS3722=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y
@@ -220,6 +226,8 @@ CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_S2MPS11=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS65090=y
@@ -280,6 +288,8 @@ CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_EXYNOS=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y
Signature · 1 line
1.7.9.5