ARM: OMAP2+: CM/PRM cleanup set

index f6f0288..60c2c9f 100644
@@ -388,7 +388,8 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
 	cm_context.iva2_cm_clksel2 =
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
-	cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
+	cm_context.cm_sysconfig =
+		omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_SYSCONFIG);
 	cm_context.sgx_cm_clksel =
 		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
 	cm_context.dss_cm_clksel =

@@ -418,7 +419,8 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
 	cm_context.pll_cm_clken2 =
 		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
-	cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
+	cm_context.cm_polctrl =
+		omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_POLCTRL);
 	cm_context.iva2_cm_fclken =
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
 	cm_context.iva2_cm_clken_pll =

@@ -519,7 +521,8 @@ void omap3_cm_restore_context(void)
 			       CM_CLKSEL1);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
 			       CM_CLKSEL2);
-	__raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
+	omap2_cm_write_mod_reg(cm_context.cm_sysconfig, OCP_MOD,
+			       OMAP3430_CM_SYSCONFIG);
 	omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
 			       CM_CLKSEL);
 	omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD,

@@ -547,7 +550,8 @@ void omap3_cm_restore_context(void)
 			       OMAP3430ES2_CM_CLKSEL5);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD,
 			       OMAP3430ES2_CM_CLKEN2);
-	__raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
+	omap2_cm_write_mod_reg(cm_context.cm_polctrl, OCP_MOD,
+			       OMAP3430_CM_POLCTRL);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
 			       CM_FCLKEN);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,

index 8224c91..0301557 100644
@@ -29,12 +29,10 @@
  * These registers appear once per CM module.
  */
 
-#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_SYSCONFIG		0x0010
+#define OMAP3430_CM_POLCTRL		0x009c
 
 #define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
  * Module specific CM register offsets from CM_BASE + domain offset

index 0e841fd..e982598 100644
@@ -429,6 +429,26 @@
 # ifndef __ASSEMBLER__
 
 /**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
+/**
  * struct omap_prcm_irq - describes a PRCM interrupt bit
  * @name: a short name describing the interrupt type, e.g. "wkup" or "io"
  * @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs

index ce25abb..8be6ea5 100644
@@ -18,9 +18,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "soc.h"
-#include "iomap.h"
-#include "common.h"
 #include "prm2xxx.h"
 #include "cm.h"
 #include "cm2xxx.h"

@@ -390,7 +387,7 @@ void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
 	tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
 		OMAP24XX_CLKSEL_DSS2_MASK;
 	omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
-	if (cpu_is_omap2430())
+	if (mdm)
 		omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
 }
 

@@ -405,19 +402,11 @@ static struct cm_ll_data omap2xxx_cm_ll_data = {
 
 int __init omap2xxx_cm_init(void)
 {
-	if (!cpu_is_omap24xx())
-		return 0;
-
 	return cm_register(&omap2xxx_cm_ll_data);
 }
 
 static void __exit omap2xxx_cm_exit(void)
 {
-	if (!cpu_is_omap24xx())
-		return;
-
-	/* Should never happen */
-	WARN(cm_unregister(&omap2xxx_cm_ll_data),
-	     "%s: cm_ll_data function pointer mismatch\n", __func__);
+	cm_unregister(&omap2xxx_cm_ll_data);
 }
 __exitcall(omap2xxx_cm_exit);

index 60c2c9f..129a4e7 100644
@@ -18,9 +18,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "soc.h"
-#include "iomap.h"
-#include "common.h"
 #include "prm2xxx_3xxx.h"
 #include "cm.h"
 #include "cm3xxx.h"

@@ -673,19 +670,11 @@ static struct cm_ll_data omap3xxx_cm_ll_data = {
 
 int __init omap3xxx_cm_init(void)
 {
-	if (!cpu_is_omap34xx())
-		return 0;
-
 	return cm_register(&omap3xxx_cm_ll_data);
 }
 
 static void __exit omap3xxx_cm_exit(void)
 {
-	if (!cpu_is_omap34xx())
-		return;
-
-	/* Should never happen */
-	WARN(cm_unregister(&omap3xxx_cm_ll_data),
-	     "%s: cm_ll_data function pointer mismatch\n", __func__);
+	cm_unregister(&omap3xxx_cm_ll_data);
 }
 __exitcall(omap3xxx_cm_exit);

index 1f3770a..bba96c1 100644
@@ -132,59 +132,11 @@ static void omap3_save_secure_ram_context(void)
 	}
 }
 
-/*
- * PRCM Interrupt Handler Helper Function
- *
- * The purpose of this function is to clear any wake-up events latched
- * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
- * may occur whilst attempting to clear a PM_WKST_x register and thus
- * set another bit in this register. A while loop is used to ensure
- * that any peripheral wake-up events occurring while attempting to
- * clear the PM_WKST_x are detected and cleared.
- */
-static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
-{
-	u32 wkst, fclk, iclk, clken;
-	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
-	u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
-	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
-	u16 grpsel_off = (regs == 3) ?
-		OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
-	int c = 0;
-
-	wkst = omap2_prm_read_mod_reg(module, wkst_off);
-	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
-	wkst &= ~ignore_bits;
-	if (wkst) {
-		iclk = omap2_cm_read_mod_reg(module, iclk_off);
-		fclk = omap2_cm_read_mod_reg(module, fclk_off);
-		while (wkst) {
-			clken = wkst;
-			omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
-			/*
-			 * For USBHOST, we don't know whether HOST1 or
-			 * HOST2 woke us up, so enable both f-clocks
-			 */
-			if (module == OMAP3430ES2_USBHOST_MOD)
-				clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
-			omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
-			omap2_prm_write_mod_reg(wkst, module, wkst_off);
-			wkst = omap2_prm_read_mod_reg(module, wkst_off);
-			wkst &= ~ignore_bits;
-			c++;
-		}
-		omap2_cm_write_mod_reg(iclk, module, iclk_off);
-		omap2_cm_write_mod_reg(fclk, module, fclk_off);
-	}
-
-	return c;
-}
-
 static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 {
 	int c;
 
-	c = prcm_clear_mod_irqs(WKUP_MOD, 1,
+	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
 		~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
 
 	return c ? IRQ_HANDLED : IRQ_NONE;

@@ -199,13 +151,13 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 	 * these are handled in a separate handler to avoid acking
 	 * IO events before parsing in mux code
 	 */
-	c = prcm_clear_mod_irqs(WKUP_MOD, 1,
+	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
 		OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
-	c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
-	c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
+	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
-		c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
+		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
 	}
 
 	return c ? IRQ_HANDLED : IRQ_NONE;

65 lines not on this page · raw message

index f8eb833..ba602f5 100644
@@ -162,6 +162,7 @@ extern void omap3xxx_prm_dpll3_reset(void);
 
 extern int __init omap3xxx_prm_init(void);
 extern u32 omap3xxx_prm_get_reset_sources(void);
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
 
 #endif /* __ASSEMBLER */
 

index bba96c1..a42f9ea 100644
@@ -350,53 +350,6 @@ restore:
 
 #endif /* CONFIG_SUSPEND */
 
-
-/**
- * omap3_iva_idle(): ensure IVA is in idle so it can be put into
- *                   retention
- *
- * In cases where IVA2 is activated by bootcode, it may prevent
- * full-chip retention or off-mode because it is not idle.  This
- * function forces the IVA2 into idle state so it can go
- * into retention/off and thus allow full-chip retention/off.
- *
- **/
-static void __init omap3_iva_idle(void)
-{
-	/* ensure IVA2 clock is disabled */
-	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* if no clock activity, nothing else to do */
-	if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
-	      OMAP3430_CLKACTIVITY_IVA2_MASK))
-		return;
-
-	/* Reset IVA2 */
-	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
-			  OMAP3430_RST2_IVA2_MASK |
-			  OMAP3430_RST3_IVA2_MASK,
-			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
-	/* Enable IVA2 clock */
-	omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
-			 OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* Set IVA2 boot mode to 'idle' */
-	omap3_ctrl_set_iva_bootmode_idle();
-
-	/* Un-reset IVA2 */
-	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
-	/* Disable IVA2 clock */
-	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* Reset IVA2 */
-	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
-			  OMAP3430_RST2_IVA2_MASK |
-			  OMAP3430_RST3_IVA2_MASK,
-			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-}
-
 static void __init omap3_d2d_idle(void)
 {
 	u16 mask, padconf;

@@ -500,7 +453,7 @@ static void __init prcm_setup_regs(void)
 	/*
 	 * We need to idle iva2_pwrdm even on am3703 with no iva2.
 	 */
-	omap3_iva_idle();
+	omap3xxx_prm_iva_idle();
 
 	omap3_d2d_idle();
 }

57 lines not on this page · raw message

index ba602f5..543eb63 100644
@@ -163,6 +163,7 @@ extern void omap3xxx_prm_dpll3_reset(void);
 extern int __init omap3xxx_prm_init(void);
 extern u32 omap3xxx_prm_get_reset_sources(void);
 int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+void omap3xxx_prm_iva_idle(void);
 
 #endif /* __ASSEMBLER */
 

index a42f9ea..0eecf6f 100644
@@ -368,10 +368,7 @@ static void __init omap3_d2d_idle(void)
 	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 
 	/* reset modem */
-	omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
-			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
-			  CORE_MOD, OMAP2_RM_RSTCTRL);
-	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+	omap3_prm_reset_modem();
 }
 
 static void __init prcm_setup_regs(void)

index 78ea9a5..92ab46a 100644
@@ -259,6 +259,21 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 }
 
 /**
+ * omap3_prm_reset_modem - toggle reset signal for modem
+ *
+ * Toggles the reset signal to modem IP block. Required to allow
+ * OMAP3430 without stacked modem to idle properly.
+ */
+void __init omap3_prm_reset_modem(void)
+{
+	omap2_prm_write_mod_reg(
+		OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+		OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
+				CORE_MOD, OMAP2_RM_RSTCTRL);
+	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
  * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
  *
  * Clear any previously-latched I/O wakeup events and ensure that the

index 543eb63..2a0f089 100644
@@ -164,6 +164,7 @@ extern int __init omap3xxx_prm_init(void);
 extern u32 omap3xxx_prm_get_reset_sources(void);
 int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
 void omap3xxx_prm_iva_idle(void);
+void omap3_prm_reset_modem(void);
 
 #endif /* __ASSEMBLER */
 

index 8be6ea5..4c29f63 100644
@@ -20,6 +20,7 @@
 
 #include "prm2xxx.h"
 #include "cm.h"
+#include "cm2xxx_3xxx_private.h"
 #include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 #include "clockdomain.h"

54 lines not on this page · raw message

74 lines not on this page · raw message

index 129a4e7..989590e 100644
@@ -20,6 +20,7 @@
 
 #include "prm2xxx_3xxx.h"
 #include "cm.h"
+#include "cm2xxx_3xxx_private.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "clockdomain.h"

index 92ab46a..6dfa95c 100644
@@ -24,7 +24,7 @@
 #include "powerdomain.h"
 #include "prm3xxx.h"
 #include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx_3xxx_private.h"
 #include "prm-regbits-34xx.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"

index 44bb4d5..4322135 100644
@@ -282,13 +282,9 @@ void omap3_clear_scratchpad_contents(void)
 	void __iomem *v_addr;
 	u32 offset = 0;
 	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
-	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
-	    OMAP3430_GLOBAL_COLD_RST_MASK) {
+	if (omap3xxx_prm_clear_global_cold_reset()) {
 		for ( ; offset <= max_offset; offset += 0x4)
 			__raw_writel(0x0, (v_addr + offset));
-		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
-					   OMAP3430_GR_MOD,
-					   OMAP3_PRM_RSTST_OFFSET);
 	}
 }
 

index 6dfa95c..2a6be73 100644
@@ -388,6 +388,26 @@ void omap3xxx_prm_iva_idle(void)
 				OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 }
 
+/**
+ * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status
+ *					  and clears it if asserted
+ *
+ * Checks if cold-reset has occurred and clears the status bit if yes. Returns
+ * 1 if cold-reset has occurred, 0 otherwise.
+ */
+int omap3xxx_prm_clear_global_cold_reset(void)
+{
+	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+	    OMAP3430_GLOBAL_COLD_RST_MASK) {
+		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+					   OMAP3430_GR_MOD,
+					   OMAP3_PRM_RSTST_OFFSET);
+		return 1;
+	}
+
+	return 0;
+}
+
 /* Powerdomain low-level functions */
 
 static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)

index 2a0f089..12ff4a0 100644
@@ -165,6 +165,7 @@ extern u32 omap3xxx_prm_get_reset_sources(void);
 int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
+int omap3xxx_prm_clear_global_cold_reset(void);
 
 #endif /* __ASSEMBLER */
 

index 4322135..5eb991a 100644
@@ -44,8 +44,7 @@ struct omap3_scratchpad {
 };
 
 struct omap3_scratchpad_prcm_block {
-	u32 prm_clksrc_ctrl;
-	u32 prm_clksel;
+	u32 prm_contents[2];
 	u32 cm_contents[11];
 	u32 prcm_block_size;
 };

@@ -327,13 +326,7 @@ void omap3_save_scratchpad_contents(void)
 	scratchpad_contents.sdrc_block_offset = 0x64;
 
 	/* Populate the PRCM block contents */
-	prcm_block_contents.prm_clksrc_ctrl =
-		omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
-				       OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-	prcm_block_contents.prm_clksel =
-		omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
-				       OMAP3_PRM_CLKSEL_OFFSET);
-
+	omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
 	omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
 
 	prcm_block_contents.prcm_block_size = 0x0;

index 2a6be73..9ebc22c 100644
@@ -408,6 +408,15 @@ int omap3xxx_prm_clear_global_cold_reset(void)
 	return 0;
 }
 
+void omap3_prm_save_scratchpad_contents(u32 *ptr)
+{
+	*ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+					OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+	*ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+					OMAP3_PRM_CLKSEL_OFFSET);
+}
+
 /* Powerdomain low-level functions */
 
 static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)

index 12ff4a0..829cdc3 100644
@@ -166,6 +166,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
+void omap3_prm_save_scratchpad_contents(u32 *ptr);
 
 #endif /* __ASSEMBLER */
 

index 2dbc30c..21fc935 100644
@@ -75,9 +75,9 @@ static int omap2_enter_full_retention(void)
 
 	/* Clear old wake-up events */
 	/* REVISIT: These write to reserved bits? */
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-	omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+	omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+	omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+	omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
 
 	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);

@@ -104,23 +104,18 @@ no_sleep:
 	clk_enable(osc_ck);
 
 	/* clear CORE wake-up events */
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+	omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
 
 	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
-	omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+	omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
 
 	/* MPU domain wake events */
-	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-	if (l & 0x01)
-		omap2_prm_write_mod_reg(0x01, OCP_MOD,
-				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-	if (l & 0x20)
-		omap2_prm_write_mod_reg(0x20, OCP_MOD,
-				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+				    0x1);
 
-	/* Mask future PRCM-to-MPU interrupts */
-	omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+				    0x20);
 
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);

@@ -148,9 +143,9 @@ static void omap2_enter_mpu_retention(void)
 	 * it is in retention mode. */
 	if (omap2_allow_mpu_retention()) {
 		/* REVISIT: These write to reserved bits? */
-		omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-		omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-		omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+		omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+		omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+		omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
 
 		/* Try to enter MPU retention */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);

index 418de9c..12cf053 100644
@@ -117,6 +117,24 @@ void omap2xxx_prm_dpll_reset(void)
 	omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
 }
 
+/**
+ * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module
+ * @module: PRM module to clear wakeups from
+ * @regs: register offset to clear
+ * @wkst_mask: wakeup status mask to clear
+ *
+ * Clears wakeup status bits for a given module, so that the device can
+ * re-enter idle.
+ */
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+	u32 wkst;
+
+	wkst = omap2_prm_read_mod_reg(module, regs);
+	wkst &= wkst_mask;
+	omap2_prm_write_mod_reg(wkst, module, regs);
+}
+
 int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
 {
 	omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,

index 3194dd8..e0e17b8 100644
@@ -125,6 +125,7 @@ extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
 extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
 extern void omap2xxx_prm_dpll_reset(void);
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
 extern int __init omap2xxx_prm_init(void);
 

index 21fc935..97b3831 100644
@@ -194,13 +194,6 @@ static void __init prcm_setup_regs(void)
 	struct powerdomain *pwrdm;
 
 	/*
-	 * Enable autoidle
-	 * XXX This should be handled by hwmod code or PRCM init code
-	 */
-	omap2_prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
-			  OMAP2_PRCM_SYSCONFIG_OFFSET);
-
-	/*
 	 * Set CORE powerdomain memory banks to retain their contents
 	 * during RETENTION
 	 */

@@ -228,37 +221,12 @@ static void __init prcm_setup_regs(void)
 	omap_pm_suspend = omap2_enter_full_retention;
 #endif
 
-	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
-	 * stabilisation */
-	omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-				OMAP2_PRCM_CLKSSETUP_OFFSET);
-
-	/* Configure automatic voltage transition */
-	omap2_prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-				OMAP2_PRCM_VOLTSETUP_OFFSET);
-	omap2_prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
-				(0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
-				OMAP24XX_MEMRETCTRL_MASK |
-				(0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
-				(0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
-				OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
-
-	/* Enable wake-up events */
-	omap2_prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
-				WKUP_MOD, PM_WKEN);
-
-	/* Enable SYS_CLKEN control when all domains idle */
-	omap2_prm_set_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, OMAP24XX_GR_MOD,
-				   OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+	omap2xxx_prm_init_pm();
 }
 
 int __init omap2_pm_init(void)
 {
-	u32 l;
-
 	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
-	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
-	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 
 	/* Look up important powerdomains */
 

48 lines not on this page · raw message

index e0e17b8..071bb6d 100644
@@ -126,6 +126,7 @@ extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
 extern void omap2xxx_prm_dpll_reset(void);
 void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
+void omap2xxx_prm_init_pm(void);
 
 extern int __init omap2xxx_prm_init(void);
 

index 0eecf6f..2fa9478 100644
@@ -282,10 +282,6 @@ void omap_sram_idle(void)
 			omap3_sram_restore_context();
 			omap2_sms_restore_context();
 		}
-		if (core_next_state == PWRDM_POWER_OFF)
-			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
-					       OMAP3430_GR_MOD,
-					       OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
 	omap3_intc_resume_idle();
 

index 2fa9478..0b9a298 100644
@@ -369,79 +369,10 @@ static void __init omap3_d2d_idle(void)
 
 static void __init prcm_setup_regs(void)
 {
-	u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
-					OMAP3630_EN_UART4_MASK : 0;
-	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
-					OMAP3630_GRPSEL_UART4_MASK : 0;
-
 	/* XXX This should be handled by hwmod code or SCM init code */
 	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 
-	/*
-	 * Enable control of expternal oscillator through
-	 * sys_clkreq. In the long run clock framework should
-	 * take care of this.
-	 */
-	omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
-			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
-			     OMAP3430_GR_MOD,
-			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-
-	/* setup wakup source */
-	omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
-			  OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
-			  WKUP_MOD, PM_WKEN);
-	/* No need to write EN_IO, that is always enabled */
-	omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
-			  OMAP3430_GRPSEL_GPT1_MASK |
-			  OMAP3430_GRPSEL_GPT12_MASK,
-			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
-
-	/* Enable PM_WKEN to support DSS LPR */
-	omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
-				OMAP3430_DSS_MOD, PM_WKEN);
-
-	/* Enable wakeups in PER */
-	omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
-			  OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
-			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
-			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
-			  OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
-			  OMAP3430_EN_MCBSP4_MASK,
-			  OMAP3430_PER_MOD, PM_WKEN);
-	/* and allow them to wake up MPU */
-	omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
-			  OMAP3430_GRPSEL_GPIO2_MASK |
-			  OMAP3430_GRPSEL_GPIO3_MASK |
-			  OMAP3430_GRPSEL_GPIO4_MASK |
-			  OMAP3430_GRPSEL_GPIO5_MASK |
-			  OMAP3430_GRPSEL_GPIO6_MASK |
-			  OMAP3430_GRPSEL_UART3_MASK |
-			  OMAP3430_GRPSEL_MCBSP2_MASK |
-			  OMAP3430_GRPSEL_MCBSP3_MASK |
-			  OMAP3430_GRPSEL_MCBSP4_MASK,
-			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
-
-	/* Don't attach IVA interrupts */
-	if (omap3_has_iva()) {
-		omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-		omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-		omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-		omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
-					OMAP3430_PM_IVAGRPSEL);
-	}
-
-	/* Clear any pending 'reset' flags */
-	omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
-
-	/* Clear any pending PRCM interrupts */
-	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
 
 	/*
 	 * We need to idle iva2_pwrdm even on am3703 with no iva2.

96 lines not on this page · raw message

index 829cdc3..7120af9 100644
@@ -167,6 +167,7 @@ void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
 void omap3_prm_save_scratchpad_contents(u32 *ptr);
+void omap3_prm_init_pm(bool has_uart4, bool has_iva);
 
 #endif /* __ASSEMBLER */
 

index 8d4db6f..45f83dd 100644
@@ -23,7 +23,7 @@
 #include "vp.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
-#include "prm2xxx.h"
+#include "prm2xxx_3xxx_private.h"
 #include "cm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 

index 947f6ad..5209823 100644
@@ -18,7 +18,7 @@
 
 #include "common.h"
 #include "powerdomain.h"
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx_3xxx_private.h"
 #include "prm-regbits-24xx.h"
 #include "clockdomain.h"
 

53 lines not on this page · raw message

77 lines not on this page · raw message

index 09e50d2..eb37970 100644
@@ -23,7 +23,7 @@
 #include "vp.h"
 #include "powerdomain.h"
 #include "prm3xxx.h"
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx_3xxx_private.h"
 #include "cm2xxx_3xxx_private.h"
 #include "prm-regbits-34xx.h"
 #include "cm3xxx.h"

index 667915d..53ed6c0 100644
@@ -144,17 +144,6 @@ static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
 	__raw_writel(scu_pwr_st, pm_info->scu_sar_addr);
 }
 
-/* Helper functions for MPUSS OSWR */
-static inline void mpuss_clear_prev_logic_pwrst(void)
-{
-	u32 reg;
-
-	reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-		OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
-	omap4_prminst_write_inst_reg(reg, OMAP4430_PRM_PARTITION,
-		OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
-}
-
 static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
 {
 	u32 reg;

@@ -252,7 +241,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	 * Check MPUSS next state and save interrupt controller if needed.
 	 * In MPUSS OSWR or device OFF, interrupt controller  contest is lost.
 	 */
-	mpuss_clear_prev_logic_pwrst();
+	omap4_prminst_mpuss_clear_prev_logic_pwrst();
 	if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
 		(pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF))
 		save_state = 2;

@@ -382,7 +371,7 @@ int __init omap4_mpuss_init(void)
 		return -ENODEV;
 	}
 	pwrdm_clear_all_prev_pwrst(mpuss_pd);
-	mpuss_clear_prev_logic_pwrst();
+	omap4_prminst_mpuss_clear_prev_logic_pwrst();
 
 	/* Save device type on scratchpad for low level code to use */
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP)

index 03a6034..3655e16 100644
@@ -26,7 +26,7 @@
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
-#include "prminst44xx.h"
+#include "prminst44xx_private.h"
 #include "powerdomain.h"
 
 /* Static data */

index 6334b96..00b69d1 100644
@@ -191,3 +191,15 @@ void omap4_prminst_global_warm_sw_reset(void)
 				    OMAP4430_PRM_DEVICE_INST,
 				    OMAP4_PRM_RSTCTRL_OFFSET);
 }
+
+void omap4_prminst_mpuss_clear_prev_logic_pwrst(void)
+{
+	u32 reg;
+
+	reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+					  OMAP4430_PRM_MPU_INST,
+					  OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+	omap4_prminst_write_inst_reg(reg, OMAP4430_PRM_PARTITION,
+				     OMAP4430_PRM_MPU_INST,
+				     OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+}

index a2ede2d..fec8f18 100644
@@ -12,15 +12,6 @@
 #ifndef __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
 #define __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
 
-/*
- * In an ideal world, we would not export these low-level functions,
- * but this will probably take some time to fix properly
- */
-extern u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx);
-extern void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
-extern u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
-					   s16 inst, u16 idx);
-
 extern void omap4_prminst_global_warm_sw_reset(void);
 
 extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,

@@ -29,6 +20,7 @@ extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
 					  u16 rstctrl_offs);
 extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
 					    u16 rstctrl_offs);
+void omap4_prminst_mpuss_clear_prev_logic_pwrst(void);
 
 extern void omap_prm_base_init(void);
 

new file mode 100644
index 0000000..c36be15
@@ -0,0 +1,25 @@
+/*
+ * OMAP4 Power/Reset Management (PRM) function prototypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRMINST44XX_PRIVATE_H
+#define __ARCH_ARM_MACH_OMAP2_PRMINST44XX_PRIVATE_H
+
+#include "prminst44xx.h"
+
+/*
+ * In an ideal world, we would not export these low-level functions,
+ * but this will probably take some time to fix properly
+ */
+u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx);
+void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
+u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
+				    s16 inst, u16 idx);
+#endif

index 5eb991a..2def1ff 100644
@@ -569,4 +569,30 @@ void omap3_ctrl_set_iva_bootmode_idle(void)
 	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
 			 OMAP343X_CONTROL_IVA2_BOOTMOD);
 }
+
+/**
+ * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
+ *
+ * Sets up the pads controlling the stacked modem in such way that the
+ * device can enter idle.
+ */
+void omap3_ctrl_setup_d2d_padconf(void)
+{
+	u16 mask, padconf;
+
+	/*
+	 * In a stand alone OMAP3430 where there is not a stacked
+	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
+	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
+	 */
+	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */

index da05480..fc00158 100644
@@ -428,6 +428,7 @@ extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 extern void omap3_ctrl_set_iva_bootmode_idle(void);
+void omap3_ctrl_setup_d2d_padconf(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else

index 0b9a298..8df2d65 100644
@@ -348,20 +348,7 @@ restore:
 
 static void __init omap3_d2d_idle(void)
 {
-	u16 mask, padconf;
-
-	/* In a stand alone OMAP3430 where there is not a stacked
-	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
-	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
-	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
-	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
-	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
-	padconf |= mask;
-	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
-
-	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
-	padconf |= mask;
-	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+	omap3_ctrl_setup_d2d_padconf();
 
 	/* reset modem */
 	omap3_prm_reset_modem();

index 8df2d65..faa2c05 100644
@@ -346,27 +346,12 @@ restore:
 
 #endif /* CONFIG_SUSPEND */
 
-static void __init omap3_d2d_idle(void)
-{
-	omap3_ctrl_setup_d2d_padconf();
-
-	/* reset modem */
-	omap3_prm_reset_modem();
-}
-
 static void __init prcm_setup_regs(void)
 {
 	/* XXX This should be handled by hwmod code or SCM init code */
 	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 
 	omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
-
-	/*
-	 * We need to idle iva2_pwrdm even on am3703 with no iva2.
-	 */
-	omap3xxx_prm_iva_idle();
-
-	omap3_d2d_idle();
 }
 
 void omap3_pm_off_mode_enable(int enable)

index eb37970..239163f 100644
@@ -361,6 +361,13 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 
 	/* Clear any pending PRCM interrupts */
 	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	/* We need to idle iva2_pwrdm even on am3703 with no iva2. */
+	omap3xxx_prm_iva_idle();
+
+	omap3_ctrl_setup_d2d_padconf();
+
+	omap3_prm_reset_modem();
 }
 
 /**

index 2def1ff..5854b3c 100644
@@ -564,7 +564,7 @@ int omap3_ctrl_save_padconf(void)
  * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
  * force disable IVA2 so that it does not prevent any low-power states.
  */
-void omap3_ctrl_set_iva_bootmode_idle(void)
+static void __init omap3_ctrl_set_iva_bootmode_idle(void)
 {
 	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
 			 OMAP343X_CONTROL_IVA2_BOOTMOD);

@@ -576,7 +576,7 @@ void omap3_ctrl_set_iva_bootmode_idle(void)
  * Sets up the pads controlling the stacked modem in such way that the
  * device can enter idle.
  */
-void omap3_ctrl_setup_d2d_padconf(void)
+static void __init omap3_ctrl_setup_d2d_padconf(void)
 {
 	u16 mask, padconf;
 

@@ -595,4 +595,19 @@ void omap3_ctrl_setup_d2d_padconf(void)
 	padconf |= mask;
 	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 }
+
+/**
+ * omap3_ctrl_init - does static initializations for control module
+ *
+ * Initializes system control module. This sets up the sysconfig autoidle,
+ * and sets up modem and iva2 so that they can be idled properly.
+ */
+void __init omap3_ctrl_init(void)
+{
+	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
+
+	omap3_ctrl_set_iva_bootmode_idle();
+
+	omap3_ctrl_setup_d2d_padconf();
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */

index fc00158..ccbd70c 100644
@@ -427,8 +427,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
 extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
-extern void omap3_ctrl_set_iva_bootmode_idle(void);
-void omap3_ctrl_setup_d2d_padconf(void);
+void omap3_ctrl_init(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else

index faa2c05..4ba0cce 100644
@@ -348,8 +348,7 @@ restore:
 
 static void __init prcm_setup_regs(void)
 {
-	/* XXX This should be handled by hwmod code or SCM init code */
-	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
+	omap3_ctrl_init();
 
 	omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
 }

index 239163f..6d3e9c2 100644
@@ -28,7 +28,6 @@
 #include "prm-regbits-34xx.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
-#include "control.h"
 
 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",	0,	0),

@@ -365,8 +364,6 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 	/* We need to idle iva2_pwrdm even on am3703 with no iva2. */
 	omap3xxx_prm_iva_idle();
 
-	omap3_ctrl_setup_d2d_padconf();
-
 	omap3_prm_reset_modem();
 }
 

@@ -469,9 +466,6 @@ void omap3xxx_prm_iva_idle(void)
 	omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
 			       OMAP3430_IVA2_MOD, CM_FCLKEN);
 
-	/* Set IVA2 boot mode to 'idle' */
-	omap3_ctrl_set_iva_bootmode_idle();
-
 	/* Un-reset IVA2 */
 	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);