Fix AT91 UDC driver on boards without vbus.
Subsystems (2)
PATCH 1/1 Fix AT91 UDC driver on boards without vbus.
From 4ea2bd2e1ca18136d7cfd61643bc8d8187b1495f Mon Sep 17 00:00:00 2001
From: Owen Kirby <[email protected]>
Date: Wed, 16 Apr 2014 17:45:18 -0700
Subject: [PATCH] Fix AT91 UDC driver on boards without vbus.
While porting Barebox to one of our boards, we found that the AT91 UDC driver will fail to connect to USB hosts, and will spam the console with errors if the VBUS pin isn't connected.
--- drivers/usb/gadget/at91_udc.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
drivers/usb/gadget/at91_udc.c +11 -9
@@ -1328,14 +1328,16 @@ int usb_gadget_poll(void)if (!udc->udp_baseaddr)return -ENODEV ; + +if (gpio_is_valid (udc->board.vbus_pin)) { + value =gpio_get_value (udc->board.vbus_pin); + value ^= udc->board.vbus_active_low; - value =gpio_get_value (udc->board.vbus_pin); - value ^= udc->board.vbus_active_low; - - udc->gpio_vbus_val = value; + udc->gpio_vbus_val = value; -if (!value) -return 0 ; +if (!value) +return 0 ; + } value =at91_udp_read (udc,AT91_UDP_ISR ) & (~(AT91_UDP_SOFINT ));if (value)
@@ -1501,14 +1503,14 @@ static int __init at91udc_probe(struct device_d *dev) udc->vbus =gpio_get_value (udc->board.vbus_pin);DBG (udc,"VBUS detection: host:%s \n" , udc->vbus ?"present" :"absent" ); + +dev_add_param_bool (dev,"vbus" , + at91_udc_vbus_set,NULL , &udc->gpio_vbus_val, udc); }else {DBG (udc,"no VBUS detection, assuming always-on\n" ); udc->vbus =1 ; } -dev_add_param_bool (dev,"vbus" , - at91_udc_vbus_set,NULL , &udc->gpio_vbus_val, udc); -poller_register (&poller);INFO (udc,"%s version %s\n" , driver_name,DRIVER_VERSION );
Signature · 8 lines
1.7.9.5 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
AppliedQuoted 10 lines · Owen Kirby
From
4ea2bd2e1ca18136d7cfd61643bc8d8187b1495fMon Sep 17 00:00:00 2001
From: Owen Kirby <[email protected]>
Date: Wed, 16 Apr 2014 17:45:18 -0700
Subject: [PATCH] Fix AT91 UDC driver on boards without vbus.While porting Barebox to one of our boards, we found that the AT91 UDC driver will fail to connect to USB hosts, and will spam the console with errors if the VBUS pin isn't connected.
Signed-off-by Owen Kirby <[email protected]>
Applied, thanks
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox