Skip to contentSkip to conversation

Does KVM support the P.A. Semi PA6T cpu?

DISCUSSION Christian Zigotzky 2 participants 25 messages Apr 18, 2014 – Jun 10, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

I'd like to virtualize a 32-bit guest Linux system on my P.A. Semi PA6T host system with QEMU/KVM. Does KVM support the P.A. Semi PA6T cpu as host system?

Happy Easter!

Cheers,

Christian

#1 lore raw
Quoted 7 lines

Am 18.04.2014 um 14:37 schrieb Christian Zigotzky <[email protected]>:

Hi,

I'd like to virtualize a 32-bit guest Linux system on my P.A. Semi PA6T host system with QEMU/KVM. Does KVM support the P.A. Semi PA6T cpu as host system?

PR KVM should work, but I don't think anyone tried so far :).

Please let us know your experience.

Alex

#2 lore raw
In reply to Christian Zigotzky

Hi Alexander,

Thanks a lot for your answer. PR KVM works on my Nemo board with a PA6T cpu. It's a bit faster than QEMU without PR KVM.

Screenshots:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t47&p'150#p27150

Thank you very much for openSUSE 13.1 PowerPC and for PR KVM!

Cheers,

Christian

Quoted 16 lines · Alexander Graf
Quoted 6 lines

Am 18.04.2014 um 14:37 schrieb Christian Zigotzky <[email protected]>:

Hi,

I'd like to virtualize a 32-bit guest Linux system on my P.A. Semi PA6T host system with QEMU/KVM. Does KVM support the P.A. Semi PA6T cpu as host system?

PR KVM should work, but I don't think anyone tried so far :).

Please let us know your experience.

Alex--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
In reply to Christian Zigotzky
Quoted 7 lines · Christian Zigotzky

Hi Alexander,

Thanks a lot for your answer. PR KVM works on my Nemo board with a PA6T cpu. It's a bit faster than QEMU without PR KVM.

Screenshots:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t47&p'150#p27150

Very nice, glad to see it works. If you like you can also try to compile mac-on-linux from svn. There is KVM support in that one which should hopefully work for you as long as you run 32bit user space. MOL isn't particularly happy when it gets compiled on 64bit.

Enjoy your PA6T machine :).

Alex

#4 lore raw
In reply to Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I have downloaded mac-on-linux from svn. I have selected KVM support in the menu config. I have tried to compile mol but I get the following error messages:

+ Entering booter

     Compiling    booter.o
     Compiling    common.o
     Compiling    elf.o
     Compiling    macho.o
     Compiling    oldworld.o
     Linking      libbooter.a
     Linking      liballmol.a

= Building mol
../obj-ppc64/build/src/liballmol.a(_misc.o): In function `flush_icache_range':
/home/christian/Downloads/mac-on-linux-svn/src/cpu/kvm/misc.c:65:
multiple definition of `flush_icache_range' ../obj-ppc64/build/src/liballmol.a(cache.o):(.text+0x30): first defined here
collect2: ld returned 1 exit status
make[2]: *** [../obj-ppc64/build/src/mol] Fehler 1
make[1]: *** [sub-src-all] Fehler 2
make: *** [auto-bootstrap] Fehler 2

Do you have an idea for me, please?

Cheers,

Christian

Quoted 25 lines · Alexander Graf
Quoted 7 lines · Christian Zigotzky

Hi Alexander,

Thanks a lot for your answer. PR KVM works on my Nemo board with a PA6T cpu. It's a bit faster than QEMU without PR KVM.

Screenshots:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t47&p'150#p27150

Very nice, glad to see it works. If you like you can also try to compile mac-on-linux from svn. There is KVM support in that one which should hopefully work for you as long as you run 32bit user space. MOL isn't particularly happy when it gets compiled on 64bit.

Enjoy your PA6T machine :).

Alex

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#5 lore raw
In reply to Christian Zigotzky

I have deselected Oldworld Support (NEW) and this solved the problem below.

-- Christian

Quoted 65 lines · Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I have downloaded mac-on-linux from svn. I have selected KVM support in the menu config. I have tried to compile mol but I get the following error messages:

+ Entering booter

    Compiling    booter.o
    Compiling    common.o
    Compiling    elf.o
    Compiling    macho.o
    Compiling    oldworld.o
    Linking      libbooter.a
    Linking      liballmol.a

= Building mol ../obj-ppc64/build/src/liballmol.a(_misc.o): In function `flush_icache_range':
/home/christian/Downloads/mac-on-linux-svn/src/cpu/kvm/misc.c:65:
multiple definition of `flush_icache_range' ../obj-ppc64/build/src/liballmol.a(cache.o):(.text+0x30): first defined here
collect2: ld returned 1 exit status
make[2]: *** [../obj-ppc64/build/src/mol] Fehler 1 make[1]: *** [sub-src-all] Fehler 2
make: *** [auto-bootstrap] Fehler 2

Do you have an idea for me, please?

Cheers,

Christian

Quoted 25 lines · Alexander Graf
Quoted 7 lines · Christian Zigotzky

Hi Alexander,

Thanks a lot for your answer. PR KVM works on my Nemo board with a PA6T cpu. It's a bit faster than QEMU without PR KVM.

Screenshots:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t47&p'150#p27150

Very nice, glad to see it works. If you like you can also try to compile mac-on-linux from svn. There is KVM support in that one which should hopefully work for you as long as you run 32bit user space. MOL isn't particularly happy when it gets compiled on 64bit.

Enjoy your PA6T machine :).

Alex

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#6 lore raw
In reply to Christian Zigotzky

Just for info: I try to boot the Mac OS X Tiger DVD:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t$25&p'161#p27161

Quoted 77 lines · Christian Zigotzky

I have deselected Oldworld Support (NEW) and this solved the problem below.

-- Christian

Quoted 65 lines · Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I have downloaded mac-on-linux from svn. I have selected KVM support in the menu config. I have tried to compile mol but I get the following error messages:

+ Entering booter

    Compiling    booter.o
    Compiling    common.o
    Compiling    elf.o
    Compiling    macho.o
    Compiling    oldworld.o
    Linking      libbooter.a
    Linking      liballmol.a

= Building mol ../obj-ppc64/build/src/liballmol.a(_misc.o): In function `flush_icache_range':
/home/christian/Downloads/mac-on-linux-svn/src/cpu/kvm/misc.c:65:
multiple definition of `flush_icache_range' ../obj-ppc64/build/src/liballmol.a(cache.o):(.text+0x30): first defined here
collect2: ld returned 1 exit status
make[2]: *** [../obj-ppc64/build/src/mol] Fehler 1 make[1]: *** [sub-src-all] Fehler 2
make: *** [auto-bootstrap] Fehler 2

Do you have an idea for me, please?

Cheers,

Christian

Quoted 25 lines · Alexander Graf
Quoted 7 lines · Christian Zigotzky

Hi Alexander,

Thanks a lot for your answer. PR KVM works on my Nemo board with a PA6T cpu. It's a bit faster than QEMU without PR KVM.

Screenshots:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t47&p'150#p27150

Very nice, glad to see it works. If you like you can also try to compile mac-on-linux from svn. There is KVM support in that one which should hopefully work for you as long as you run 32bit user space. MOL isn't particularly happy when it gets compiled on 64bit.

Enjoy your PA6T machine :).

Alex

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#7 lore raw
In reply to Christian Zigotzky

Hi Alex,

I have tried to boot the install CD/DVD of Panther and Tiger. Unfortunately I see only the blue penguin and the activity indicator below.

Console messages (Mac OS X Panther start):

startmol -X --cdboot
Mac-on-Linux 0.9.73-SVN [Apr 19 2014 14:32]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 1
Removing stale lockfile /var/local/mol/lock/mol-1
*******************************************************
* Measuring the timebase frequency.
* This will take about 5 seconds
*******************************************************

     03F94196
     03F9417A
     03F94180
     03F94178
     03F941A4

*******************************************************
* Adding 'timebase_frequency: 0x03F94178' to
* /etc/mol/session.map will prevent this delay
*******************************************************
KVM mapped 00000000 - 0x20000000 to 0x40000000 flags 0 Unknown processor id (0000).
Running in PowerPC 750 mode, 512 MB RAM
Timebase: 66.66 MHz, Bus: 900.00 MHz, Clock: 1800 MHz Using USB mouse on /dev/input/mice
OHCI USB controller registered
Could not open '/var/local/mol/x11.kbd' Fullscreen video on VT 8.
Could not open '/var/local/mol/console.kbd' Video driver(s): [xvideo] [console_video]

      640* 480, depth 8,32   { 0.0 } Hz
      800* 600, depth 8,32   { 0.0 } Hz
     1024* 768, depth 8,32   { 0.0 } Hz
     1152* 864, depth 8,32   { 0.0 } Hz
     1280*1024, depth 8,32   { 0.0 } Hz
     1440* 960, depth 8,32   { 0.0 } Hz
     1600*1024, depth 8,32   { 0.0 } Hz
     1600*1200, depth 8,15,32   { 0.0 } Hz
     1680*1050, depth 8,32   { 0.0 } Hz

FATAL: Module ip_tables not found.
iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded. Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EF

     ip/mask: 192.168.41.2/255.255.255.0  gw: 192.168.41.1
     broadcast: 192.168.41.255  nameserver: 192.168.41.1

OSS sound driver loaded

Available Disks:
HFS+ /home/christia.. Mac_OS_X_CD <read-only> 646 MB

SCSI devices:
[SCSI auto-probing disabled]

<No SCSI Devices>
KVM mapped 0x81000000 - 0x8112c000 to 0xf7dbf000 flags 38

Quoted 7 lines
Quoted 7 lines

=========================
MacOS X Boot Loader ;.9.73-SVN
Candidate boot volume: /mol-blk@0/disk@0:0 /mol-blk@0/disk@0:0,\mach_kernel (3819896 bytes) KVM advanced inst patch: success /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
=========================

<*> MOL acceleration for 10.3
<*> Block Driver v1.1

Console messages (Mac OS X Tiger start):

startmol -X --cdboot
Mac-on-Linux 0.9.73-SVN [Apr 19 2014 14:32]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 1
Removing stale lockfile /var/local/mol/lock/mol-1
*******************************************************
* Measuring the timebase frequency.
* This will take about 5 seconds
*******************************************************

     03F9419A
     03F941C2
     03F94190
     03F9419A
     03F94192

*******************************************************
* Adding 'timebase_frequency: 0x03F94190' to
* /etc/mol/session.map will prevent this delay
*******************************************************
KVM mapped 00000000 - 0x20000000 to 0x40000000 flags 0 Unknown processor id (0000).
Running in PowerPC 750 mode, 512 MB RAM
Timebase: 66.66 MHz, Bus: 900.00 MHz, Clock: 1800 MHz Using USB mouse on /dev/input/mice
OHCI USB controller registered
Could not open '/var/local/mol/x11.kbd' Fullscreen video on VT 8.
Could not open '/var/local/mol/console.kbd' Video driver(s): [xvideo] [console_video]

      640* 480, depth 8,32   { 0.0 } Hz
      800* 600, depth 8,32   { 0.0 } Hz
     1024* 768, depth 8,32   { 0.0 } Hz
     1152* 864, depth 8,32   { 0.0 } Hz
     1280*1024, depth 8,32   { 0.0 } Hz
     1440* 960, depth 8,32   { 0.0 } Hz
     1600*1024, depth 8,32   { 0.0 } Hz
     1600*1200, depth 8,15,32   { 0.0 } Hz
     1680*1050, depth 8,32   { 0.0 } Hz

FATAL: Module ip_tables not found.
iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded. Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EF

     ip/mask: 192.168.41.2/255.255.255.0  gw: 192.168.41.1
     broadcast: 192.168.41.255  nameserver: 192.168.41.1

OSS sound driver loaded

Available Disks:
CD /dev/sr0 CD/DVD <read-only> ------ BOOT1

SCSI devices:
[SCSI auto-probing disabled]

SCSI /dev/sr0 [CDROM/DVD driver]

KVM mapped 0x81000000 - 0x8112c000 to 0xf784a000 flags 38

Quoted 8 lines
Quoted 8 lines

=========================
MacOS X Boot Loader 0.9.73-SVN
Candidate boot volume: /mol-scsi/disk@0:3 /mol-scsi/disk@0:3,\mach_kernel (4313028 bytes) KVM paHched: _bcopy_physvir_32
KVM advanced inst patch: success /mol-scsi/disk@0:3,\System\Library\Extensions.mkext
=========================

<*> SCSI driver v1.03
<*> IRQ vectorCanBeShared 3
<*> IRQ vectorCanBeShared 4
<*> IRQ vectorCanBeShared 2
<*> Block Driver v1.1
<*> IRQ vectorCanBeShared 6
<*> IRQ vectorCanBeShared 24

Rgds,

Christian

Quoted 87 lines · Christian Zigotzky

Just for info: I try to boot the Mac OS X Tiger DVD:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t$25&p'161#p27161

Quoted 77 lines · Christian Zigotzky

I have deselected Oldworld Support (NEW) and this solved the problem below.

-- Christian

Quoted 65 lines · Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I have downloaded mac-on-linux from svn. I have selected KVM support in the menu config. I have tried to compile mol but I get the following error messages:

+ Entering booter

    Compiling    booter.o
    Compiling    common.o
    Compiling    elf.o
    Compiling    macho.o
    Compiling    oldworld.o
    Linking      libbooter.a
    Linking      liballmol.a

= Building mol ../obj-ppc64/build/src/liballmol.a(_misc.o): In function `flush_icache_range':
/home/christian/Downloads/mac-on-linux-svn/src/cpu/kvm/misc.c:65:
multiple definition of `flush_icache_range' ../obj-ppc64/build/src/liballmol.a(cache.o):(.text+0x30): first defined here
collect2: ld returned 1 exit status
make[2]: *** [../obj-ppc64/build/src/mol] Fehler 1 make[1]: *** [sub-src-all] Fehler 2
make: *** [auto-bootstrap] Fehler 2

Do you have an idea for me, please?

Cheers,

Christian

Quoted 25 lines · Alexander Graf
Quoted 7 lines · Christian Zigotzky

Hi Alexander,

Thanks a lot for your answer. PR KVM works on my Nemo board with a PA6T cpu. It's a bit faster than QEMU without PR KVM.

Screenshots:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t47&p'150#p27150

Very nice, glad to see it works. If you like you can also try to compile mac-on-linux from svn. There is KVM support in that one which should hopefully work for you as long as you run 32bit user space. MOL isn't particularly happy when it gets compiled on 64bit.

Enjoy your PA6T machine :).

Alex

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#8 lore raw
In reply to Christian Zigotzky

Hi Alex,

Mac OS X on MOL and QEMU doesn't work with KVM-PR. But it works without KVM on QEMU.

Screenshot:
http://forum.hyperion-entertainment.biz/download/file.php?id96&mode=view

Rgds,

Christian

Quoted 257 lines · Christian Zigotzky

Hi Alex,

I have tried to boot the install CD/DVD of Panther and Tiger. Unfortunately I see only the blue penguin and the activity indicator below.

Console messages (Mac OS X Panther start):

startmol -X --cdboot
Mac-on-Linux 0.9.73-SVN [Apr 19 2014 14:32]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 1
Removing stale lockfile /var/local/mol/lock/mol-1
*******************************************************
* Measuring the timebase frequency.
* This will take about 5 seconds
*******************************************************

    03F94196
    03F9417A
    03F94180
    03F94178
    03F941A4

*******************************************************
* Adding 'timebase_frequency: 0x03F94178' to
* /etc/mol/session.map will prevent this delay
*******************************************************
KVM mapped 00000000 - 0x20000000 to 0x40000000 flags 0 Unknown processor id (0000).
Running in PowerPC 750 mode, 512 MB RAM
Timebase: 66.66 MHz, Bus: 900.00 MHz, Clock: 1800 MHz Using USB mouse on /dev/input/mice
OHCI USB controller registered
Could not open '/var/local/mol/x11.kbd' Fullscreen video on VT 8.
Could not open '/var/local/mol/console.kbd' Video driver(s): [xvideo] [console_video]

     640* 480, depth 8,32   { 0.0 } Hz
     800* 600, depth 8,32   { 0.0 } Hz
    1024* 768, depth 8,32   { 0.0 } Hz
    1152* 864, depth 8,32   { 0.0 } Hz
    1280*1024, depth 8,32   { 0.0 } Hz
    1440* 960, depth 8,32   { 0.0 } Hz
    1600*1024, depth 8,32   { 0.0 } Hz
    1600*1200, depth 8,15,32   { 0.0 } Hz
    1680*1050, depth 8,32   { 0.0 } Hz

FATAL: Module ip_tables not found.
iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded. Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EF

    ip/mask: 192.168.41.2/255.255.255.0  gw: 192.168.41.1
    broadcast: 192.168.41.255  nameserver: 192.168.41.1

OSS sound driver loaded

Available Disks:
HFS+ /home/christia.. Mac_OS_X_CD <read-only> 646 MB

SCSI devices:
[SCSI auto-probing disabled]

<No SCSI Devices>
KVM mapped 0x81000000 - 0x8112c000 to 0xf7dbf000 flags 38

Quoted 7 lines
Quoted 7 lines

=========================
MacOS X Boot Loader ;.9.73-SVN
Candidate boot volume: /mol-blk@0/disk@0:0 /mol-blk@0/disk@0:0,\mach_kernel (3819896 bytes) KVM advanced inst patch: success /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
=========================

<*> MOL acceleration for 10.3
<*> Block Driver v1.1

Console messages (Mac OS X Tiger start):

startmol -X --cdboot
Mac-on-Linux 0.9.73-SVN [Apr 19 2014 14:32]
Copyright (C) 1997-2004 Samuel Rydh
Starting MOL session 1
Removing stale lockfile /var/local/mol/lock/mol-1
*******************************************************
* Measuring the timebase frequency.
* This will take about 5 seconds
*******************************************************

    03F9419A
    03F941C2
    03F94190
    03F9419A
    03F94192

*******************************************************
* Adding 'timebase_frequency: 0x03F94190' to
* /etc/mol/session.map will prevent this delay
*******************************************************
KVM mapped 00000000 - 0x20000000 to 0x40000000 flags 0 Unknown processor id (0000).
Running in PowerPC 750 mode, 512 MB RAM
Timebase: 66.66 MHz, Bus: 900.00 MHz, Clock: 1800 MHz Using USB mouse on /dev/input/mice
OHCI USB controller registered
Could not open '/var/local/mol/x11.kbd' Fullscreen video on VT 8.
Could not open '/var/local/mol/console.kbd' Video driver(s): [xvideo] [console_video]

     640* 480, depth 8,32   { 0.0 } Hz
     800* 600, depth 8,32   { 0.0 } Hz
    1024* 768, depth 8,32   { 0.0 } Hz
    1152* 864, depth 8,32   { 0.0 } Hz
    1280*1024, depth 8,32   { 0.0 } Hz
    1440* 960, depth 8,32   { 0.0 } Hz
    1600*1024, depth 8,32   { 0.0 } Hz
    1600*1200, depth 8,15,32   { 0.0 } Hz
    1680*1050, depth 8,32   { 0.0 } Hz

FATAL: Module ip_tables not found.
iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded. Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EF

    ip/mask: 192.168.41.2/255.255.255.0  gw: 192.168.41.1
    broadcast: 192.168.41.255  nameserver: 192.168.41.1

OSS sound driver loaded

Available Disks:
CD /dev/sr0 CD/DVD <read-only> ------ BOOT1

SCSI devices:
[SCSI auto-probing disabled]

SCSI /dev/sr0 [CDROM/DVD driver]

KVM mapped 0x81000000 - 0x8112c000 to 0xf784a000 flags 38

Quoted 8 lines
Quoted 8 lines

=========================
MacOS X Boot Loader 0.9.73-SVN
Candidate boot volume: /mol-scsi/disk@0:3 /mol-scsi/disk@0:3,\mach_kernel (4313028 bytes) KVM paHched: _bcopy_physvir_32
KVM advanced inst patch: success /mol-scsi/disk@0:3,\System\Library\Extensions.mkext
=========================

<*> SCSI driver v1.03
<*> IRQ vectorCanBeShared 3
<*> IRQ vectorCanBeShared 4
<*> IRQ vectorCanBeShared 2
<*> Block Driver v1.1
<*> IRQ vectorCanBeShared 6
<*> IRQ vectorCanBeShared 24

Rgds,

Christian

Quoted 87 lines · Christian Zigotzky

Just for info: I try to boot the Mac OS X Tiger DVD:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t$25&p'161#p27161

Quoted 77 lines · Christian Zigotzky

I have deselected Oldworld Support (NEW) and this solved the problem below.

-- Christian

Quoted 65 lines · Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I have downloaded mac-on-linux from svn. I have selected KVM support in the menu config. I have tried to compile mol but I get the following error messages:

+ Entering booter

    Compiling    booter.o
    Compiling    common.o
    Compiling    elf.o
    Compiling    macho.o
    Compiling    oldworld.o
    Linking      libbooter.a
    Linking      liballmol.a

= Building mol ../obj-ppc64/build/src/liballmol.a(_misc.o): In function `flush_icache_range':
/home/christian/Downloads/mac-on-linux-svn/src/cpu/kvm/misc.c:65:
multiple definition of `flush_icache_range' ../obj-ppc64/build/src/liballmol.a(cache.o):(.text+0x30): first defined here
collect2: ld returned 1 exit status
make[2]: *** [../obj-ppc64/build/src/mol] Fehler 1 make[1]: *** [sub-src-all] Fehler 2
make: *** [auto-bootstrap] Fehler 2

Do you have an idea for me, please?

Cheers,

Christian

Quoted 25 lines · Alexander Graf
Quoted 7 lines · Christian Zigotzky

Hi Alexander,

Thanks a lot for your answer. PR KVM works on my Nemo board with a PA6T cpu. It's a bit faster than QEMU without PR KVM.

Screenshots:
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t47&p'150#p27150

Very nice, glad to see it works. If you like you can also try to compile mac-on-linux from svn. There is KVM support in that one which should hopefully work for you as long as you run 32bit user space. MOL isn't particularly happy when it gets compiled on 64bit.

Enjoy your PA6T machine :).

Alex

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#9 lore raw
In reply to Christian Zigotzky

Hi All,

Mac-on-Linux with KVM support works. But Mac OS X doesn't boot. I haven't found any problems. Do you have a tip for me, please?

==== Backtrace: ====/lib/powerpc-linux-gnu/libc.so.6(+0x88d70)[0xfbd3d70] /lib/powerpc-linux-gnu/libc.so.6(realloc+0x340)[0xfbd8440] /lib/ld.so.1(+0x13054)[0xf7e74054] /lib/ld.so.1(+0x277c)[0xf7e6377c] /lib/powerpc-linux-gnu/libc.so.6(+0x147b48)[0xfc92b48] /lib/powerpc-linux-gnu/libc.so.6(__libc_thread_freeres+0x50)[0xfc92af0] /lib/powerpc-linux-gnu/libpthread.so.0(+0x7ad8)[0xfdf6ad8] /lib/powerpc-linux-gnu/libc.so.6(clone+0x84)[0xfc404e4]
==== Memory map: ====
00100000-00103000 r-xp 00000000 00:00 0
[vdso]
0faa1000-0faa6000 r-xp 00000000 08:04 12851160 /usr/lib/powerpc-linux-gnu/libXdmcp.so.6.0.0 0faa6000-0fab5000 ---p 00005000 08:04 12851160 /usr/lib/powerpc-linux-gnu/libXdmcp.so.6.0.0 0fab5000-0fab6000 rw-p 00004000 08:04 12851160 /usr/lib/powerpc-linux-gnu/libXdmcp.so.6.0.0 0fac6000-0fac8000 r-xp 00000000 08:04 12849118 /usr/lib/powerpc-linux-gnu/libXau.so.6.0.0
0fac8000-0fad8000 ---p 00002000 08:04 12849118 /usr/lib/powerpc-linux-gnu/libXau.so.6.0.0
0fad8000-0fad9000 r--p 00002000 08:04 12849118 /usr/lib/powerpc-linux-gnu/libXau.so.6.0.0
0fad9000-0fada000 rw-p 00003000 08:04 12849118 /usr/lib/powerpc-linux-gnu/libXau.so.6.0.0
0faea000-0faed000 r-xp 00000000 08:04 11802152 /lib/powerpc-linux-gnu/libdl-2.17.so
0faed000-0fafc000 ---p 00003000 08:04 11802152 /lib/powerpc-linux-gnu/libdl-2.17.so
0fafc000-0fafd000 r--p 00002000 08:04 11802152 /lib/powerpc-linux-gnu/libdl-2.17.so
0fafd000-0fafe000 rw-p 00003000 08:04 11802152 /lib/powerpc-linux-gnu/libdl-2.17.so
0fb0e000-0fb2a000 r-xp 00000000 08:04 12849104 /usr/lib/powerpc-linux-gnu/libxcb.so.1.1.0
0fb2a000-0fb39000 ---p 0001c000 08:04 12849104 /usr/lib/powerpc-linux-gnu/libxcb.so.1.1.0
0fb39000-0fb3a000 r--p 0001b000 08:04 12849104 /usr/lib/powerpc-linux-gnu/libxcb.so.1.1.0
0fb3a000-0fb3b000 rw-p 0001c000 08:04 12849104 /usr/lib/powerpc-linux-gnu/libxcb.so.1.1.0
0fb4b000-0fcc0000 r-xp 00000000 08:04 11802168 /lib/powerpc-linux-gnu/libc-2.17.so
0fcc0000-0fccf000 ---p 00175000 08:04 11802168 /lib/powerpc-linux-gnu/libc-2.17.so
0fccf000-0fcd4000 r--p 00174000 08:04 11802168 /lib/powerpc-linux-gnu/libc-2.17.so
0fcd4000-0fcd5000 rw-p 00179000 08:04 11802168 /lib/powerpc-linux-gnu/libc-2.17.so
0fcd5000-0fcd8000 rw-p 00000000 00:00 0
0fce8000-0fcfe000 r-xp 00000000 08:04 11796547 /lib/powerpc-linux-gnu/libz.so.1.2.8
0fcfe000-0fd0d000 ---p 00016000 08:04 11796547 /lib/powerpc-linux-gnu/libz.so.1.2.8
0fd0d000-0fd0e000 r--p 00015000 08:04 11796547 /lib/powerpc-linux-gnu/libz.so.1.2.8
0fd0e000-0fd0f000 rw-p 00016000 08:04 11796547 /lib/powerpc-linux-gnu/libz.so.1.2.8
0fd1f000-0fdca000 r-xp 00000000 08:04 11802166 /lib/powerpc-linux-gnu/libm-2.17.so
0fdca000-0fdda000 ---p 000ab000 08:04 11802166 /lib/powerpc-linux-gnu/libm-2.17.so
0fdda000-0fdde000 r--p 000ab000 08:04 11802166 /lib/powerpc-linux-gnu/libm-2.17.so
0fdde000-0fddf000 rw-p 000af000 08:04 11802166 /lib/powerpc-linux-gnu/libm-2.17.so
0fdef000-0fe06000 r-xp 00000000 08:04 11802160 /lib/powerpc-linux-gnu/libpthread-2.17.so
0fe06000-0fe16000 ---p 00017000 08:04 11802160 /lib/powerpc-linux-gnu/libpthread-2.17.so
0fe16000-0fe17000 r--p 00017000 08:04 11802160 /lib/powerpc-linux-gnu/libpthread-2.17.so
0fe17000-0fe18000 rw-p 00018000 08:04 11802160 /lib/powerpc-linux-gnu/libpthread-2.17.so
0fe18000-0fe1a000 rw-p 00000000 00:00 0
0fe2a000-0fe3d000 r-xp 00000000 08:04 12859019 /usr/lib/powerpc-linux-gnu/libXext.so.6.4.0
0fe3d000-0fe4c000 ---p 00013000 08:04 12859019 /usr/lib/powerpc-linux-gnu/libXext.so.6.4.0
0fe4c000-0fe4d000 r--p 00012000 08:04 12859019 /usr/lib/powerpc-linux-gnu/libXext.so.6.4.0
0fe4d000-0fe4e000 rw-p 00013000 08:04 12859019 /usr/lib/powerpc-linux-gnu/libXext.so.6.4.0
0fe5e000-0ff96000 r-xp 00000000 08:04 12849127 /usr/lib/powerpc-linux-gnu/libX11.so.6.3.0
0ff96000-0ffa5000 ---p 00138000 08:04 12849127 /usr/lib/powerpc-linux-gnu/libX11.so.6.3.0
0ffa5000-0ffa7000 r--p 00137000 08:04 12849127 /usr/lib/powerpc-linux-gnu/libX11.so.6.3.0
0ffa7000-0ffaa000 rw-p 00139000 08:04 12849127 /usr/lib/powerpc-linux-gnu/libX11.so.6.3.0
0ffba000-0ffdf000 r-xp 00000000 08:04 11796670 /lib/powerpc-linux-gnu/libpng12.so.0.49.0
0ffdf000-0ffee000 ---p 00025000 08:04 11796670 /lib/powerpc-linux-gnu/libpng12.so.0.49.0
0ffee000-0ffef000 r--p 00024000 08:04 11796670 /lib/powerpc-linux-gnu/libpng12.so.0.49.0
0ffef000-0fff0000 rw-p 00025000 08:04 11796670 /lib/powerpc-linux-gnu/libpng12.so.0.49.0
10000000-10040000 r-xp 00000000 08:04 13771643 /usr/local/lib/mol/0.9.73/bin/mol
1004f000-10051000 rw-p 0003f000 08:04 13771643 /usr/local/lib/mol/0.9.73/bin/mol
10051000-10075000 rwxp 00000000 00:00 0
[heap]
10075000-1008e000 rwxp 00000000 00:00 0
[heap]
f6128000-f6129000 ---p 00000000 00:00 0
f6129000-f6928000 rwxp 00000000 00:00 0
[stack:11074]
f6928000-f6929000 ---p 00000000 00:00 0
f6929000-f7128000 rwxp 00000000 00:00 0
[stack:11073]
f7128000-f7129000 ---p 00000000 00:00 0
f7129000-f7928000 rwxp 00000000 00:00 0
f7e61000-f7e82000 r-xp 00000000 08:04 11802173 /lib/powerpc-linux-gnu/ld-2.17.so
f7e88000-f7e8b000 rw-p 00000000 00:00 0
f7e8b000-f7e8d000 rw-s 00000000 00:08 15
anon_inode:kvm-vcpu
f7e8d000-f7e92000 rw-p 00000000 00:00 0
f7e92000-f7e93000 r--p 00021000 08:04 11802173 /lib/powerpc-linux-gnu/ld-2.17.so
f7e93000-f7e94000 rw-p 00022000 08:04 11802173 /lib/powerpc-linux-gnu/ld-2.17.so
ff9e2000-ffa03000 rwxp 00000000 00:00 0
[stack]

#10 lore raw
In reply to Christian Zigotzky

Hi All,

I have compiled Mac-on-Linux with KVM support on Lubuntu 12.04.4. I have set up an env variable "export CFLAGS=-m32" and the binaries are all in 32-bit. But Mac OS X Jaguar doesn't boot.

file /usr/local/bin/mol*

/usr/local/bin/mol-img: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]&fec38beb93ac3deb500ad3d8f08bde78d5512a, not stripped /usr/local/bin/molrcget: symbolic link to `/usr/local/lib/mol/0.9.73/bin/molrcget' /usr/local/bin/molvconfig: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]Ïe14810b52a6de07365646e8b77ca3ab3fbcdd8, stripped

Screenshot:
http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start@&viewmode=flat&order=0#733147

@Alex: Have you got any tips for me, please?

Have a nice weekend.

Cheers,

Christian

#11 lore raw
In reply to Christian Zigotzky
Quoted 19 lines · Christian Zigotzky

Hi All,

I have compiled Mac-on-Linux with KVM support on Lubuntu 12.04.4. I have set up an env variable "export CFLAGS=-m32" and the binaries are all in 32-bit. But Mac OS X Jaguar doesn't boot.

file /usr/local/bin/mol*

/usr/local/bin/mol-img: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]&fec38beb93ac3deb500ad3d8f08bde78d5512a, not stripped /usr/local/bin/molrcget: symbolic link to `/usr/local/lib/mol/0.9.73/bin/molrcget' /usr/local/bin/molvconfig: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]Ïe14810b52a6de07365646e8b77ca3ab3fbcdd8, stripped

Quoted 4 lines

Screenshot:
http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start@&viewmode=flat&order=0#733147

@Alex: Have you got any tips for me, please?

Phew. Check dmesg. Are there unknown instructions anywhere maybe? Play with the emulated CPU type - for some cases G3, for others G4 worked better for me. IIRC I had most success running Tiger.

Also, I think I always used VNC output - that one was most reliable for me.

Alex

#12 lore raw
In reply to Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I checked dmesg yesterday but I didn't find any error messages about MOL or KVM. I played a bit with the emulated CPU types but without any success. I tried the VNC output and it works but it didn't solve the boot problem of Mac OS X. I have figured out, that there is a verbose mode. I have activated it in the molrc.osx (cmdline "-v"). I have started 2 MOL sessions. The first with Jaguar and the second with Tiger. Unfortunately, both aren't booting to the end.

Screenshot:

http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start`&viewmode=flat&order=0
http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t"55&p'368#p27368

Both are running in the G3 mode (molrc.osx: processor: G3). The G4 mode doesn't work because MOL told me that AltiVec is unavailable; reverting to G3 mode. But AltiVec was activated in the molrc.osx. Do you have another idea, please?

Have a nice week and thanks in advance.

Cheers,

Christian

Quoted 41 lines · Alexander Graf
Quoted 19 lines · Christian Zigotzky

Hi All,

I have compiled Mac-on-Linux with KVM support on Lubuntu 12.04.4. I have set up an env variable "export CFLAGS=-m32" and the binaries are all in 32-bit. But Mac OS X Jaguar doesn't boot.

file /usr/local/bin/mol*

/usr/local/bin/mol-img: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]&fec38beb93ac3deb500ad3d8f08bde78d5512a, not stripped /usr/local/bin/molrcget: symbolic link to `/usr/local/lib/mol/0.9.73/bin/molrcget' /usr/local/bin/molvconfig: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]Ïe14810b52a6de07365646e8b77ca3ab3fbcdd8, stripped

Quoted 4 lines

Screenshot:
http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start@&viewmode=flat&order=0#733147

@Alex: Have you got any tips for me, please?

Phew. Check dmesg. Are there unknown instructions anywhere maybe? Play with the emulated CPU type - for some cases G3, for others G4 worked better for me. IIRC I had most success running Tiger.

Also, I think I always used VNC output - that one was most reliable for me.

Alex

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#13 lore raw
In reply to Christian Zigotzky

I use a smp kernel. Can I use a smp kernel for "PR" KVM?

-- Christian

Quoted 79 lines · Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I checked dmesg yesterday but I didn't find any error messages about MOL or KVM. I played a bit with the emulated CPU types but without any success. I tried the VNC output and it works but it didn't solve the boot problem of Mac OS X. I have figured out, that there is a verbose mode. I have activated it in the molrc.osx (cmdline "-v"). I have started 2 MOL sessions. The first with Jaguar and the second with Tiger. Unfortunately, both aren't booting to the end.

Screenshot:

http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start`&viewmode=flat&order=0

http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t"55&p'368#p27368

Both are running in the G3 mode (molrc.osx: processor: G3). The G4 mode doesn't work because MOL told me that AltiVec is unavailable; reverting to G3 mode. But AltiVec was activated in the molrc.osx. Do you have another idea, please?

Have a nice week and thanks in advance.

Cheers,

Christian

Quoted 41 lines · Alexander Graf
Quoted 19 lines · Christian Zigotzky

Hi All,

I have compiled Mac-on-Linux with KVM support on Lubuntu 12.04.4. I have set up an env variable "export CFLAGS=-m32" and the binaries are all in 32-bit. But Mac OS X Jaguar doesn't boot.

file /usr/local/bin/mol*

/usr/local/bin/mol-img: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]&fec38beb93ac3deb500ad3d8f08bde78d5512a, not stripped /usr/local/bin/molrcget: symbolic link to `/usr/local/lib/mol/0.9.73/bin/molrcget' /usr/local/bin/molvconfig: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]Ïe14810b52a6de07365646e8b77ca3ab3fbcdd8, stripped

Quoted 4 lines

Screenshot:
http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start@&viewmode=flat&order=0#733147

@Alex: Have you got any tips for me, please?

Phew. Check dmesg. Are there unknown instructions anywhere maybe? Play with the emulated CPU type - for some cases G3, for others G4 worked better for me. IIRC I had most success running Tiger.

Also, I think I always used VNC output - that one was most reliable for me.

Alex

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#14 lore raw
In reply to Christian Zigotzky
Quoted 18 lines · Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I checked dmesg yesterday but I didn't find any error messages about MOL or KVM. I played a bit with the emulated CPU types but without any success. I tried the VNC output and it works but it didn't solve the boot problem of Mac OS X. I have figured out, that there is a verbose mode. I have activated it in the molrc.osx (cmdline "-v"). I have started 2 MOL sessions. The first with Jaguar and the second with Tiger. Unfortunately, both aren't booting to the end.

Screenshot:

http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start`&viewmode=flat&order=0

http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t"55&p'368#p27368

Quoted 6 lines

Both are running in the G3 mode (molrc.osx: processor: G3). The G4 mode doesn't work because MOL told me that AltiVec is unavailable; reverting to G3 mode. But AltiVec was activated in the molrc.osx. Do you have another idea, please?

Have a nice week and thanks in advance.

Please don't top post.

Not sure what's going wrong here. Maybe the MOL patchery to circumvent split real mode doesn't work? Maybe there's something not working with the dcbz32 patchery?

You could try to trace the guest through /sys/kernel/debug/tracing and see where it's stuck. You can also tell XNU to be more verbose by passing in a debug= parameter - though I don't remember the exact syntax anymore.

SMP should be fine. The reason XNU doesn't work with QEMU + KVM is split real mode. We don't emulate that one properly in KVM yet.

Alex

#15 lore raw
In reply to Christian Zigotzky
Quoted 29 lines · Alexander Graf
Quoted 18 lines · Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I checked dmesg yesterday but I didn't find any error messages about MOL or KVM. I played a bit with the emulated CPU types but without any success. I tried the VNC output and it works but it didn't solve the boot problem of Mac OS X. I have figured out, that there is a verbose mode. I have activated it in the molrc.osx (cmdline "-v"). I have started 2 MOL sessions. The first with Jaguar and the second with Tiger. Unfortunately, both aren't booting to the end.

Screenshot:

http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start`&viewmode=flat&order=0

http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t"55&p'368#p27368

Quoted 6 lines

Both are running in the G3 mode (molrc.osx: processor: G3). The G4 mode doesn't work because MOL told me that AltiVec is unavailable; reverting to G3 mode. But AltiVec was activated in the molrc.osx. Do you have another idea, please?

Have a nice week and thanks in advance.

Please don't top post.

Quoted 8 lines

Not sure what's going wrong here. Maybe the MOL patchery to circumvent split real mode doesn't work? Maybe there's something not working with the dcbz32 patchery?

You could try to trace the guest through /sys/kernel/debug/tracing and see where it's stuck. You can also tell XNU to be more verbose by passing in a debug= parameter - though I don't remember the exact syntax anymore.

Hi Alex,

I have traced a Mac OS X Tiger guest. I have started it in the single user mode. Sometimes I get a shell. But the cpu load rise up to 100% and I can't enter any commands.

Screenshot:
http://forum.hyperion-entertainment.biz/download/file.php?id05&mode=view

Trace log: http://forum.hyperion-entertainment.biz/download/file.php?id04

Could you look in the trace log, please? I can do more tests if you like.

Cheers,

Christian

Quoted 12 lines

SMP should be fine. The reason XNU doesn't work with QEMU + KVM is split real mode. We don't emulate that one properly in KVM yet.

Alex

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#16 lore raw
In reply to Christian Zigotzky
Quoted 44 lines · Christian Zigotzky
Quoted 29 lines · Alexander Graf
Quoted 18 lines · Christian Zigotzky

Hi Alex,

Thanks a lot for your answer. I checked dmesg yesterday but I didn't find any error messages about MOL or KVM. I played a bit with the emulated CPU types but without any success. I tried the VNC output and it works but it didn't solve the boot problem of Mac OS X. I have figured out, that there is a verbose mode. I have activated it in the molrc.osx (cmdline "-v"). I have started 2 MOL sessions. The first with Jaguar and the second with Tiger. Unfortunately, both aren't booting to the end.

Screenshot:

http://amigaworld.net/modules/newbb/viewtopic.php?mode=viewtopic&topic_id7652&forum4&start`&viewmode=flat&order=0

http://forum.hyperion-entertainment.biz/viewtopic.php?f5&t"55&p'368#p27368

Quoted 6 lines

Both are running in the G3 mode (molrc.osx: processor: G3). The G4 mode doesn't work because MOL told me that AltiVec is unavailable; reverting to G3 mode. But AltiVec was activated in the molrc.osx. Do you have another idea, please?

Have a nice week and thanks in advance.

Please don't top post.

Quoted 8 lines

Not sure what's going wrong here. Maybe the MOL patchery to circumvent split real mode doesn't work? Maybe there's something not working with the dcbz32 patchery?

You could try to trace the guest through /sys/kernel/debug/tracing and see where it's stuck. You can also tell XNU to be more verbose by passing in a debug= parameter - though I don't remember the exact syntax anymore.

Hi Alex,

I have traced a Mac OS X Tiger guest. I have started it in the single user mode. Sometimes I get a shell. But the cpu load rise up to 100% and I can't enter any commands.

Quoted 7 lines

Screenshot:
http://forum.hyperion-entertainment.biz/download/file.php?id05&mode=view

Trace log:
http://forum.hyperion-entertainment.biz/download/file.php?id04

Could you look in the trace log, please? I can do more tests if you like.

$ echo 1 > /sys/kernel/debug/tracing/events/kvm/enabled
$ echo 1 > /sys/kernel/debug/tracing/events/kvm_pr/enabled
$ cat /sys/kernel/debug/tracing/trace_pipe > /dev/shm/trace &
$ start_mol -X
...

then check out /dev/shm/trace :).

Alex

#17 lore raw
In reply to Christian Zigotzky
Quoted 23 lines · Alexander Graf
Quoted 6 lines · Christian Zigotzky

Hi Alex,

I have traced a Mac OS X Tiger guest. I have started it in the single user mode. Sometimes I get a shell. But the cpu load rise up to 100% and I can't enter any commands.

Quoted 8 lines

Screenshot:
http://forum.hyperion-entertainment.biz/download/file.php?id05&mode=view

Trace log:
http://forum.hyperion-entertainment.biz/download/file.php?id04

Could you look in the trace log, please? I can do more tests if you like.

$ echo 1 > /sys/kernel/debug/tracing/events/kvm/enabled
$ echo 1 > /sys/kernel/debug/tracing/events/kvm_pr/enabled
$ cat /sys/kernel/debug/tracing/trace_pipe > /dev/shm/trace &
$ start_mol -X
...
Quoted 5 lines

then check out /dev/shm/trace :).

Alex

Hi Alex,

Thank you for your answer. Here are the traces:

http://www.xenosoft.de/trace_mol_mac_os_x_tiger.txt.tar.gz
http://www.xenosoft.de/trace_mol_mac_os_x_jaguar.txt.tar.gz

Log:
modprobe kvm-pr
mount -t debugfs nodev /sys/kernel/debug
echo 1 > /sys/kernel/debug/tracing/events/kvm/enable
echo 1 > /sys/kernel/debug/tracing/events/kvm_pr/enable
cat /sys/kernel/debug/tracing/trace_pipe > /dev/shm/trace & startmol -X (Mac OS X Tiger guest in the single user mode from the DVD ISO) cat /dev/shm/trace
startmol -X (Mac OS X Jaguar guest in the single user mode from the disk image)
cat /dev/shm/trace

Screenshots:

http://forum.hyperion-entertainment.biz/download/file.php?id11&mode=view
http://forum.hyperion-entertainment.biz/download/file.php?id12&mode=view

Thank you for your help. :-)

Cheers,

Christian

#18 lore raw
In reply to Christian Zigotzky
Quoted 27 lines · Christian Zigotzky
Quoted 26 lines · Alexander Graf
Quoted 6 lines · Christian Zigotzky

Hi Alex,

I have traced a Mac OS X Tiger guest. I have started it in the single user mode. Sometimes I get a shell. But the cpu load rise up to 100% and I can't enter any commands.

Quoted 8 lines

Screenshot:
http://forum.hyperion-entertainment.biz/download/file.php?id05&mode=view

Trace log:
http://forum.hyperion-entertainment.biz/download/file.php?id04

Could you look in the trace log, please? I can do more tests if you like.

$ echo 1 > /sys/kernel/debug/tracing/events/kvm/enabled
$ echo 1 > /sys/kernel/debug/tracing/events/kvm_pr/enabled
$ cat /sys/kernel/debug/tracing/trace_pipe > /dev/shm/trace &
$ start_mol -X
...

then check out /dev/shm/trace :).

Quoted 8 lines
Quoted 2 lines

Alex

Hi Alex,

Thank you for your answer. Here are the traces:

http://www.xenosoft.de/trace_mol_mac_os_x_tiger.txt.tar.gz
http://www.xenosoft.de/trace_mol_mac_os_x_jaguar.txt.tar.gz

Looking at the Jaguar log, the guest seems to be stuck trying to map a page:

              mol-4087  [001] ....   252.368002: kvm_exit: 

exitÚTA_STORAGE | pc=0x900074c4 | msr=0x4000d030 | dar=0xa000a434 | srr1=0x100000000000d032 | last_inst=0x912b0
000

If you look at the trace, you will see that this PC with the exact same DAR happens over and over again - every time the guest thinks it's mapped the page.

I don't know why that's happening. Try to enable the debug prints (or convert them to trace points ;)) in the book3s_32 guest and book3s_64 host emulation. Maybe that tells us something.

Alex

#19 lore raw
In reply to Christian Zigotzky

Am 30.05.14 14:21, schrieb Alexander Graf:

Quoted 21 lines · Christian Zigotzky
Quoted 6 lines

Hi Alex,

Thank you for your answer. Here are the traces:

http://www.xenosoft.de/trace_mol_mac_os_x_tiger.txt.tar.gz
http://www.xenosoft.de/trace_mol_mac_os_x_jaguar.txt.tar.gz

Looking at the Jaguar log, the guest seems to be stuck trying to map a page:

             mol-4087  [001] ....   252.368002: kvm_exit: 

exitÚTA_STORAGE | pc=0x900074c4 | msr=0x4000d030 | dar=0xa000a434 | srr1=0x100000000000d032 | last_inst=0x912b0
000

If you look at the trace, you will see that this PC with the exact same DAR happens over and over again - every time the guest thinks it's mapped the page.

Quoted 6 lines

I don't know why that's happening. Try to enable the debug prints (or convert them to trace points ;)) in the book3s_32 guest and book3s_64 host emulation. Maybe that tells us something.

Alex

Thanks Alex for your effort. How can I enable the debug prints?

-- Christian

#20 lore raw
In reply to Christian Zigotzky
Quoted 22 lines · Christian Zigotzky

Am 30.05.14 14:21, schrieb Alexander Graf:

Quoted 21 lines · Christian Zigotzky
Quoted 6 lines

Hi Alex,

Thank you for your answer. Here are the traces:

http://www.xenosoft.de/trace_mol_mac_os_x_tiger.txt.tar.gz
http://www.xenosoft.de/trace_mol_mac_os_x_jaguar.txt.tar.gz

Looking at the Jaguar log, the guest seems to be stuck trying to map a page:

             mol-4087  [001] ....   252.368002: kvm_exit: 

exitÚTA_STORAGE | pc=0x900074c4 | msr=0x4000d030 | dar=0xa000a434 | srr1=0x100000000000d032 | last_inst=0x912b0
000

If you look at the trace, you will see that this PC with the exact same DAR happens over and over again - every time the guest thinks it's mapped the page.

Quoted 7 lines
Quoted 6 lines

I don't know why that's happening. Try to enable the debug prints (or convert them to trace points ;)) in the book3s_32 guest and book3s_64 host emulation. Maybe that tells us something.

Alex

Thanks Alex for your effort. How can I enable the debug prints?

This should do the trick. Output will be in dmesg:

(quoted diff) +0 -0

b/arch/powerpc/kvm/book3s_32_mmu.c
index 93503bb..939b14f 100644

arch/powerpc/kvm/book3s_32_mmu.c +2 -2
@@ -27,8 +27,8 @@
  #include <asm/kvm_ppc.h>
  #include <asm/kvm_book3s.h>
 
-/* #define DEBUG_MMU */
-/* #define DEBUG_MMU_PTE */
+#define DEBUG_MMU
+#define DEBUG_MMU_PTE
  /* #define DEBUG_MMU_PTE_IP 0xfff14c40 */
 
  #ifdef DEBUG_MMU

There's also always the chance that split real mode is the real culprit for breakage here. Have you verified that the same kernel source (KVM code) works on a PPC32 host with MOL?

Alex

#21 lore raw
In reply to Christian Zigotzky
Quoted 40 lines · Alexander Graf
Quoted 22 lines · Christian Zigotzky

Am 30.05.14 14:21, schrieb Alexander Graf:

Quoted 21 lines · Christian Zigotzky
Quoted 6 lines

Hi Alex,

Thank you for your answer. Here are the traces:

http://www.xenosoft.de/trace_mol_mac_os_x_tiger.txt.tar.gz
http://www.xenosoft.de/trace_mol_mac_os_x_jaguar.txt.tar.gz

Looking at the Jaguar log, the guest seems to be stuck trying to map a page:

mol-4087 [001] .... 252.368002: kvm_exit: exitÚTA_STORAGE | pc=0x900074c4 | msr=0x4000d030 | dar=0xa000a434 | srr1=0x100000000000d032 | last_inst=0x912b0
000

If you look at the trace, you will see that this PC with the exact same DAR happens over and over again - every time the guest thinks it's mapped the page.

Quoted 7 lines
Quoted 6 lines

I don't know why that's happening. Try to enable the debug prints (or convert them to trace points ;)) in the book3s_32 guest and book3s_64 host emulation. Maybe that tells us something.

Alex

Thanks Alex for your effort. How can I enable the debug prints?

This should do the trick. Output will be in dmesg:

arch/powerpc/kvm/book3s_32_mmu.c +0 -0
index 93503bb..939b14f 100644

arch/powerpc/kvm/book3s_32_mmu.c line 34

Quoted 10 lines
arch/powerpc/kvm/book3s_32_mmu.c +2 -2
@@ -27,8 +27,8 @@
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
 
-/* #define DEBUG_MMU */
-/* #define DEBUG_MMU_PTE */
+#define DEBUG_MMU
+#define DEBUG_MMU_PTE
 /* #define DEBUG_MMU_PTE_IP 0xfff14c40 */
 
 #ifdef DEBUG_MMU

Hi Alex,

Unfortunately, the KVM modul doesn't compile with DEBUG_MMU.

Kernel 3.14.4:

make modules
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
CALL scripts/checksyscalls.sh
AS [M] arch/powerpc/kvm/fpu.o
CC [M] arch/powerpc/kvm/book3s_paired_singles.o CC [M] arch/powerpc/kvm/book3s_pr.o
CC [M] arch/powerpc/kvm/book3s_pr_papr.o
CC [M] arch/powerpc/kvm/book3s_emulate.o
AS [M] arch/powerpc/kvm/book3s_interrupts.o
CC [M] arch/powerpc/kvm/book3s_mmu_hpte.o
CC [M] arch/powerpc/kvm/book3s_64_mmu_host.o
CC [M] arch/powerpc/kvm/book3s_64_mmu.o
CC [M] arch/powerpc/kvm/book3s_32_mmu.o arch/powerpc/kvm/book3s_32_mmu.c: In function ‘kvmppc_mmu_book3s_32_get_pteg’:
arch/powerpc/kvm/book3s_32_mmu.c:133:2: error: ‘struct kvmppc_vcpu_book3s’ has no member named ‘vcpu’ make[1]: *** [arch/powerpc/kvm/book3s_32_mmu.o] Fehler 1
make: *** [arch/powerpc/kvm] Fehler 2

Quoted 5 lines

There's also always the chance that split real mode is the real culprit for breakage here. Have you verified that the same kernel source (KVM code) works on a PPC32 host with MOL?

My PPC32 host (Sam440ep-Flex 733MHz) is too slow for MOL.

Rgds,

Christian

#22 lore raw
In reply to Christian Zigotzky
Quoted 45 lines · Alexander Graf
Quoted 36 lines
Quoted 9 lines

This should do the trick. Output will be in dmesg:

arch/powerpc/kvm/book3s_32_mmu.c +0 -0
index 93503bb..939b14f 100644

arch/powerpc/kvm/book3s_32_mmu.c line 34

Quoted 10 lines
arch/powerpc/kvm/book3s_32_mmu.c +2 -2
@@ -27,8 +27,8 @@
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
 
-/* #define DEBUG_MMU */
-/* #define DEBUG_MMU_PTE */
+#define DEBUG_MMU
+#define DEBUG_MMU_PTE
 /* #define DEBUG_MMU_PTE_IP 0xfff14c40 */
 
 #ifdef DEBUG_MMU

Hi Alex,

Unfortunately, the KVM modul doesn't compile with DEBUG_MMU.

Kernel 3.14.4:

make modules
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
CALL scripts/checksyscalls.sh
AS [M] arch/powerpc/kvm/fpu.o
CC [M] arch/powerpc/kvm/book3s_paired_singles.o
CC [M] arch/powerpc/kvm/book3s_pr.o
CC [M] arch/powerpc/kvm/book3s_pr_papr.o
CC [M] arch/powerpc/kvm/book3s_emulate.o
AS [M] arch/powerpc/kvm/book3s_interrupts.o

Quoted 8 lines

CC [M] arch/powerpc/kvm/book3s_mmu_hpte.o
CC [M] arch/powerpc/kvm/book3s_64_mmu_host.o CC [M] arch/powerpc/kvm/book3s_64_mmu.o
CC [M] arch/powerpc/kvm/book3s_32_mmu.o arch/powerpc/kvm/book3s_32_mmu.c: In function ‘kvmppc_mmu_book3s_32_get_pteg’:
arch/powerpc/kvm/book3s_32_mmu.c:133:2: error: ‘struct kvmppc_vcpu_book3s’ has no member named

Quoted 4 lines

Och jetzt komm - das bisschen C um den zu fixen wirst du doch noch schaffen, oder? ;)

Huch, Deutsch. Bestimmt aus Nürnberg. :D Meine Lieblingsstadt. ;-) I have solved the problem above.

Dmesg logs:

watch -n 0 "dmesg" > dmesg_mol_mac_os_x_tiger.txt watch -n 0 "dmesg" > dmesg_mol_mac_os_x_jaguar.txt

http://forum.hyperion-entertainment.biz/download/file.php?id15
http://forum.hyperion-entertainment.biz/download/file.php?id16

more dmesg_mol_mac_os_x_tiger.txt

I hope you can fix the problem.

-- Christian

#23 lore raw
In reply to Christian Zigotzky

Am 30.05.14 19:38, schrieb Christian Zigotzky:

Quoted 5 lines

Dmesg logs:

watch -n 0 "dmesg" > dmesg_mol_mac_os_x_tiger.txt watch -n 0 "dmesg" > dmesg_mol_mac_os_x_jaguar.txt

Quoted 9 lines

http://forum.hyperion-entertainment.biz/download/file.php?id15
http://forum.hyperion-entertainment.biz/download/file.php?id16

more dmesg_mol_mac_os_x_tiger.txt

I hope you can fix the problem.

-- Christian

Hi Alex,

I've read that we should disable SMP support for KVM
(http://techuman.wordpress.com/2013/09/12/powerpc-g4-virtualization-with-kvm/).
Is that right? Shall I unset the SMP support in the kernel config? Have you looked in the dmesg files above?

Cheers,

Christian

#24 lore raw
In reply to Christian Zigotzky
Quoted 13 lines · Christian Zigotzky

Am 30.05.14 19:38, schrieb Christian Zigotzky:

Quoted 12 lines

Dmesg logs:

watch -n 0 "dmesg" > dmesg_mol_mac_os_x_tiger.txt watch -n 0 "dmesg" > dmesg_mol_mac_os_x_jaguar.txt

http://forum.hyperion-entertainment.biz/download/file.php?id15
http://forum.hyperion-entertainment.biz/download/file.php?id16

more dmesg_mol_mac_os_x_tiger.txt

I hope you can fix the problem.

Quoted 7 lines
Quoted 2 lines

-- Christian

Hi Alex,

I've read that we should disable SMP support for KVM
(http://techuman.wordpress.com/2013/09/12/powerpc-g4-virtualization-with-kvm/).
Is that right?

Only on 32bit hosts.

Quoted 2 lines

Shall I unset the SMP support in the kernel config? Have you looked in the dmesg files above?

I have no idea what's going wrong on your system tbh :).

Alex