ARM: dts: ventana: Add HDMI support
Subsystems (2)
PATCH 1/1 ARM: dts: ventana: Add HDMI support
Configure ddc and enable HDMI
--- arch/arm/boot/dts/imx6q-gw5400-a.dts | 5 +++++ arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 5 +++++ arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 5 +++++ arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 5 +++++ arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 +++++ 5 files changed, 25 insertions(+)
arch/arm/boot/dts/imx6q-gw5400-a.dts +5 -0
@@ -157,6 +157,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default";
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +5 -0
@@ -101,6 +101,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default";
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +5 -0
@@ -148,6 +148,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default";
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +5 -0
@@ -157,6 +157,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default";
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +5 -0
@@ -147,6 +147,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default";
Signature · 1 line
1.9.2
PATCH 1/1 ARM: dts: ventana: Add HDMI support
Quoted 1 line · Tim Harvey
Configure ddc and enable HDMI
It would be nice if the patch subject included the SoC name rather than "dts":
ARM: imx: add HDMI support for Ventana
or:
ARM: dts: imx: add HDMI support for Ventana
There's a Ventana board for both i.MX and Tegra, so this patch caught my eye.
PATCH 1/1 ARM: dts: ventana: Add HDMI support
Quoted 6 lines · Stephen Warren
Quoted 1 line · Tim Harvey
Configure ddc and enable HDMI
It would be nice if the patch subject included the SoC name rather than "dts":
Quoted 6 lines
ARM: imx: add HDMI support for Ventana
or:
ARM: dts: imx: add HDMI support for VentanaThere's a Ventana board for both i.MX and Tegra, so this patch caught my eye.
Stephen,
ok - I'll try to remember than for future patches.
Tim
Shawn Guo
AppliedPATCH 1/1 ARM: dts: ventana: Add HDMI support
In reply to Tim HarveyQuoted 3 lines · Tim Harvey
Configure ddc and enable HDMI
Signed-off-by Tim Harvey <[email protected]>
Applied, thanks.