Skip to contentSkip to conversation

powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS

PATCH New Aneesh Bansal 2 participants 2 messages Mar 12, 2014 – Apr 23, 2014

lore
Share & tools
lore

Aneesh Bansal

author
#0 lore raw

PATCH 1/1 powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS

In case of secure boot from NAND, the DDR is initialized by the BootROM using the config words (CF_WORDS) in the CF_HEADER and u-boot image is copied from NAND to DDR by the BootROM. So, CONFIG_SYS_RAMBOOT has been defined for Secure Boot from NAND

Signed-off-by Aneesh Bansal <[email protected]>
---
 boards.cfg                   | 2 ++
 include/configs/BSC9132QDS.h | 9 ++++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)
boards.cfg +2 -0
index 3e73d7e..deddbd8 100644
@@ -804,6 +804,8 @@ Active  powerpc     mpc85xx        -           freescale       bsc9132qds
 Active  powerpc     mpc85xx        -           freescale       bsc9132qds          BSC9132QDS_SDCARD_DDRCLK133_SECURE   BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT                                                                      Aneesh Bansal <[email protected]>
 Active  powerpc     mpc85xx        -           freescale       bsc9132qds          BSC9132QDS_SPIFLASH_DDRCLK100_SECURE BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT                                                                    Aneesh Bansal <[email protected]>
 Active  powerpc     mpc85xx        -           freescale       bsc9132qds          BSC9132QDS_SPIFLASH_DDRCLK133_SECURE BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT                                                                    Aneesh Bansal <[email protected]>
+Active  powerpc     mpc85xx        -           freescale       bsc9132qds          BSC9132QDS_NAND_DDRCLK100_SECURE     BSC9132QDS:BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_100,SECURE_BOOT                                                                Aneesh Bansal <[email protected]>
+Active  powerpc     mpc85xx        -           freescale       bsc9132qds          BSC9132QDS_NAND_DDRCLK133_SECURE     BSC9132QDS:BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_133,SECURE_BOOT                                                                Aneesh Bansal <[email protected]>
 Active  powerpc     mpc85xx        -           freescale       c29xpcie            C29XPCIE                             C29XPCIE:C29XPCIE,36BIT                                                                                                           Po Liu <[email protected]>
 Active  powerpc     mpc85xx        -           freescale       c29xpcie            C29XPCIE_NAND                        C29XPCIE:C29XPCIE,36BIT,NAND                                                                                                      Po Liu <[email protected]>
 Active  powerpc     mpc85xx        -           freescale       c29xpcie            C29XPCIE_SPIFLASH                    C29XPCIE:C29XPCIE,36BIT,SPIFLASH                                                                                                  Po Liu <[email protected]>
include/configs/BSC9132QDS.h +8 -1
index 772e123..1b119f1 100644
@@ -32,6 +32,13 @@
 #define CONFIG_SYS_TEXT_BASE		0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
 #endif
+#ifdef CONFIG_NAND_SECBOOT
+#define CONFIG_RAMBOOT_NAND
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE		0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
+#endif
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL

@@ -551,7 +558,7 @@ combinations. this should be removed later
 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
 #define CONFIG_ENV_SECT_SIZE	0x10000
 #define CONFIG_ENV_SIZE		0x2000
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET	((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
Signature · 1 line
1.8.1.4
#1 lore raw

PATCH 1/1 powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS

Quoted 7 lines · Aneesh Bansal

In case of secure boot from NAND, the DDR is initialized by the BootROM using the config words (CF_WORDS) in the CF_HEADER and u-boot image is copied from NAND to DDR by the BootROM. So, CONFIG_SYS_RAMBOOT has been defined for Secure Boot from NAND

Signed-off-by Aneesh Bansal <[email protected]>

---

Applied to u-boot-mpc85xx/master, thanks.

York