3.10.38-stable review

This is the start of the stable review cycle for the 3.10.38 release. There are 23 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat Apr 26 21:48:09 UTC 2014. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.10.38-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.10.38-rc1

Oleg Nesterov <[email protected]>
exit: call disassociate_ctty() before exit_task_namespaces()

Oleg Nesterov <[email protected]>

    wait: fix reparent_leader() vs EXIT_DEAD->EXIT_ZOMBIE race

David S. Miller <[email protected]>
sparc64: Make sure %pil interrupts are enabled during hypervisor yield.

Dave Kleikamp <[email protected]>
sparc64: don't treat 64-bit syscall return codes as 32-bit

Paul Gortmaker <[email protected]>
sparc32: fix build failure for arch_jump_label_transform

Dave Kleikamp <[email protected]>
Revert "sparc64: Fix __copy_{to,from}_user_inatomic defines."

oftedal <[email protected]>
sparc: PCI: Fix incorrect address calculation of PCI Bridge windows on Simba-bridges

Li Zefan <[email protected]>
jffs2: remove from wait queue after schedule()

Li Zefan <[email protected]>
jffs2: avoid soft-lockup in jffs2_reserve_space_gc()

Ajesh Kunhipurayil Vijayan <[email protected]>
jffs2: Fix crash due to truncation of csize

Kamlakant Patel <[email protected]>
jffs2: Fix segmentation fault found in stress test

Eric Whitney <[email protected]>
ext4: fix partial cluster handling for bigalloc file systems

Eric Whitney <[email protected]>
ext4: fix error return from ext4_ext_handle_uninitialized_extents()

Hidetoshi Seto <[email protected]>
Btrfs: skip submitting barrier for missing device

Jan Kara <[email protected]>
bdi: avoid oops on device removal

Derek Basehore <[email protected]>
backing_dev: fix hung task on sync

Claudio Takahasi <[email protected]>
Bluetooth: Fix removing Long Term Key

Oleg Nesterov <[email protected]>

    pid_namespace: pidns_get() should check task_active_pid_ns() != NULL

Hannes Reinecke <[email protected]>
tty: Set correct tty name in 'active' sysfs attribute

Ian Abbott <[email protected]>
staging: comedi: 8255_pci: initialize MITE data window

Neil Horman <[email protected]>
x86: Adjust irq remapping quirk for older revisions of 5500/5520 chipsets

Jiri Slaby <[email protected]>
Char: ipmi_bt_sm, fix infinite loop

Mikulas Patocka <[email protected]>
user namespace: fix incorrect memory barriers

-------------

Diffstat:

 Makefile                                  |  4 ++--
 arch/sparc/Kconfig                        |  2 +-
 arch/sparc/include/asm/uaccess_64.h       |  4 ++--
 arch/sparc/kernel/pci.c                   |  4 ++--
 arch/sparc/kernel/process_64.c            |  4 +++-
 arch/sparc/kernel/syscalls.S              |  4 ++--
 arch/x86/kernel/early-quirks.c            | 15 ++++++--------
 drivers/char/ipmi/ipmi_bt_sm.c            |  2 +-
 drivers/staging/comedi/drivers/8255_pci.c | 34 +++++++++++++++++++++++++++++++
 drivers/tty/tty_io.c                      | 23 +++++++++++++++------
 fs/btrfs/disk-io.c                        |  4 ++++
 fs/ext4/extents.c                         | 29 ++++++++++++++++++++++++--
 fs/fs-writeback.c                         | 31 ++++++++++++++++++++--------
 fs/jffs2/compr_rtime.c                    |  4 ++--
 fs/jffs2/nodelist.h                       |  2 +-
 fs/jffs2/nodemgmt.c                       | 14 +++++++++----
 include/linux/backing-dev.h               |  2 +-
 kernel/exit.c                             | 21 +++++++++++--------
 kernel/pid_namespace.c                    |  4 +++-
 kernel/user_namespace.c                   | 11 +++++-----
 mm/backing-dev.c                          | 16 +++++++++++----
 net/bluetooth/hci_event.c                 |  8 +++++++-
 22 files changed, 177 insertions(+), 65 deletions(-)

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

commit e79323bd87808fdfbc68ce6c5371bd224d9672ee upstream.

smp_read_barrier_depends() can be used if there is data dependency between the readers - i.e. if the read operation after the barrier uses address that was obtained from the read operation before the barrier.

In this file, there is only control dependency, no data dependecy, so the use of smp_read_barrier_depends() is incorrect. The code could fail in the following way:
* the cpu predicts that idx < entries is true and starts executing the body of the for loop
* the cpu fetches map->extent[0].first and map->extent[0].count
* the cpu fetches map->nr_extents
* the cpu verifies that idx < extents is true, so it commits the instructions in the body of the for loop

The problem is that in this scenario, the cpu read map->extent[0].first and map->nr_extents in the wrong order. We need a full read memory barrier to prevent it.

---
 kernel/user_namespace.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

@@ -148,7 +148,7 @@ static u32 map_id_range_down(struct uid_
 
 	/* Find the matching extent */
 	extents = map->nr_extents;
-	smp_read_barrier_depends();
+	smp_rmb();
 	for (idx = 0; idx < extents; idx++) {
 		first = map->extent[idx].first;
 		last = first + map->extent[idx].count - 1;

@@ -172,7 +172,7 @@ static u32 map_id_down(struct uid_gid_ma
 
 	/* Find the matching extent */
 	extents = map->nr_extents;
-	smp_read_barrier_depends();
+	smp_rmb();
 	for (idx = 0; idx < extents; idx++) {
 		first = map->extent[idx].first;
 		last = first + map->extent[idx].count - 1;

@@ -195,7 +195,7 @@ static u32 map_id_up(struct uid_gid_map
 
 	/* Find the matching extent */
 	extents = map->nr_extents;
-	smp_read_barrier_depends();
+	smp_rmb();
 	for (idx = 0; idx < extents; idx++) {
 		first = map->extent[idx].lower_first;
 		last = first + map->extent[idx].count - 1;

@@ -611,9 +611,8 @@ static ssize_t map_write(struct file *fi
 	 * were written before the count of the extents.
 	 *
 	 * To achieve this smp_wmb() is used on guarantee the write
-	 * order and smp_read_barrier_depends() is guaranteed that we
-	 * don't have crazy architectures returning stale data.
-	 *
+	 * order and smp_rmb() is guaranteed that we don't have crazy
+	 * architectures returning stale data.
 	 */
 	mutex_lock(&id_map_mutex);
 

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <[email protected]>

commit a94cdd1f4d30f12904ab528152731fb13a812a16 upstream.

In read_all_bytes, we do

  unsigned char i;
  ...
  bt->read_data[0] = BMC2HOST;
  bt->read_count = bt->read_data[0];
  ...
  for (i = 1; i <= bt->read_count; i++)
    bt->read_data[i] = BMC2HOST;

If bt->read_data[0] == bt->read_count == 255, we loop infinitely in the 'for' loop. Make 'i' an 'int' instead of 'char' to get rid of the overflow and finish the loop after 255 iterations every time.

---
 drivers/char/ipmi/ipmi_bt_sm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -352,7 +352,7 @@ static inline void write_all_bytes(struc
 
 static inline int read_all_bytes(struct si_sm_data *bt)
 {
-	unsigned char i;
+	unsigned int i;
 
 	/*
 	 * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Neil Horman <[email protected]>

commit 6f8a1b335fde143b7407036e2368d3cd6eb55674 upstream.

Commit 03bbcb2e7e2 (iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets) properly disables irq remapping on the 5500/5520 chipsets that don't correctly perform that feature.

However, when I wrote it, I followed the errata sheet linked in that commit too closely, and explicitly tied the activation of the quirk to revision 0x13 of the chip, under the assumption that earlier revisions were not in the field. Recently a system was reported to be suffering from this remap bug and the quirk hadn't triggered, because the revision id register read at a lower value that 0x13, so the quirk test failed improperly. Given this, it seems only prudent to adjust this quirk so that any revision less than 0x13 has the quirk asserted.

[ tglx: Removed the 0x12 comparison of pci id 3405 as this is covered

    	by the <= 0x13 check already ]

---
 arch/x86/kernel/early-quirks.c |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

@@ -202,18 +202,15 @@ static void __init intel_remapping_check
 	revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID);
 
 	/*
- 	 * Revision 13 of all triggering devices id in this quirk have
-	 * a problem draining interrupts when irq remapping is enabled,
-	 * and should be flagged as broken.  Additionally revisions 0x12
-	 * and 0x22 of device id 0x3405 has this problem.
+	 * Revision <= 13 of all triggering devices id in this quirk
+	 * have a problem draining interrupts when irq remapping is
+	 * enabled, and should be flagged as broken. Additionally
+	 * revision 0x22 of device id 0x3405 has this problem.
 	 */
-	if (revision == 0x13)
+	if (revision <= 0x13)
 		set_irq_remapping_broken();
-	else if ((device == 0x3405) &&
-	    ((revision == 0x12) ||
-	     (revision == 0x22)))
+	else if (device == 0x3405 && revision == 0x22)
 		set_irq_remapping_broken();
-
 }
 
 #define QFLAG_APPLY_ONCE 	0x1

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit 268d1e799663b795cba15c64f5d29407786a9dd4 upstream.

According to National Instruments' PCI-DIO-96/PXI-6508/PCI-6503 User Manual, the physical address in PCI BAR1 needs to be OR'ed with 0x80 and written to register offset 0xC0 in the "MITE" registers (BAR0). Do so during initialization of the National Instruments boards handled by the "8255_pci" driver. The boards were previously handled by the "ni_pcidio" driver, where the initialization was done by mite_setup() in the "mite" module. The "mite" module comes with too much extra baggage for the "8255_pci" driver to deal with so use a local, simpler initialization function.

---
 drivers/staging/comedi/drivers/8255_pci.c |   34 ++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

@@ -59,6 +59,7 @@ Configuration Options: not applicable, u
 #include "../comedidev.h"
 
 #include "8255.h"
+#include "mite.h"
 
 enum pci_8255_boardid {
 	BOARD_ADLINK_PCI7224,

@@ -82,6 +83,7 @@ struct pci_8255_boardinfo {
 	const char *name;
 	int dio_badr;
 	int n_8255;
+	unsigned int has_mite:1;
 };
 
 static const struct pci_8255_boardinfo pci_8255_boards[] = {

@@ -129,36 +131,43 @@ static const struct pci_8255_boardinfo p
 		.name		= "ni_pci-dio-96",
 		.dio_badr	= 1,
 		.n_8255		= 4,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PCIDIO96B] = {
 		.name		= "ni_pci-dio-96b",
 		.dio_badr	= 1,
 		.n_8255		= 4,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PXI6508] = {
 		.name		= "ni_pxi-6508",
 		.dio_badr	= 1,
 		.n_8255		= 4,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PCI6503] = {
 		.name		= "ni_pci-6503",
 		.dio_badr	= 1,
 		.n_8255		= 1,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PCI6503B] = {
 		.name		= "ni_pci-6503b",
 		.dio_badr	= 1,
 		.n_8255		= 1,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PCI6503X] = {
 		.name		= "ni_pci-6503x",
 		.dio_badr	= 1,
 		.n_8255		= 1,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PXI_6503] = {
 		.name		= "ni_pxi-6503",
 		.dio_badr	= 1,
 		.n_8255		= 1,
+		.has_mite	= 1,
 	},
 };
 

@@ -166,6 +175,25 @@ struct pci_8255_private {
 	void __iomem *mmio_base;
 };
 
+static int pci_8255_mite_init(struct pci_dev *pcidev)
+{
+	void __iomem *mite_base;
+	u32 main_phys_addr;
+
+	/* ioremap the MITE registers (BAR 0) temporarily */
+	mite_base = pci_ioremap_bar(pcidev, 0);
+	if (!mite_base)
+		return -ENOMEM;
+
+	/* set data window to main registers (BAR 1) */
+	main_phys_addr = pci_resource_start(pcidev, 1);
+	writel(main_phys_addr | WENAB, mite_base + MITE_IODWBSR);
+
+	/* finished with MITE registers */
+	iounmap(mite_base);
+	return 0;
+}
+
 static int pci_8255_mmio(int dir, int port, int data, unsigned long iobase)
 {
 	void __iomem *mmio_base = (void __iomem *)iobase;

@@ -205,6 +233,12 @@ static int pci_8255_auto_attach(struct c
 	if (ret)
 		return ret;
 
+	if (board->has_mite) {
+		ret = pci_8255_mite_init(pcidev);
+		if (ret)
+			return ret;
+	}
+
 	is_mmio = (pci_resource_flags(pcidev, board->dio_badr) &
 		   IORESOURCE_MEM) != 0;
 	if (is_mmio) {

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Reinecke <[email protected]>

commit 723abd87f6e536f1353c8f64f621520bc29523a3 upstream.

The 'active' sysfs attribute should refer to the currently active tty devices the console is running on, not the currently active console. The console structure doesn't refer to any device in sysfs, only the tty the console is running on has. So we need to print out the tty names in 'active', not the console names.

There is one special-case, which is tty0. If the console is directed to it, we want 'tty0' to show up in the file, so user-space knows that the messages get forwarded to the active VT. The ->device() callback would resolve tty0, though. Hence, treat it special and don't call into the VT layer to resolve it (plymouth is known to depend on it).

---
 drivers/tty/tty_io.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

@@ -1267,12 +1267,13 @@ static void pty_line_name(struct tty_dri
  *
  *	Locking: None
  */
-static void tty_line_name(struct tty_driver *driver, int index, char *p)
+static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
 {
 	if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
-		strcpy(p, driver->name);
+		return sprintf(p, "%s", driver->name);
 	else
-		sprintf(p, "%s%d", driver->name, index + driver->name_base);
+		return sprintf(p, "%s%d", driver->name,
+			       index + driver->name_base);
 }
 
 /**

@@ -3538,9 +3539,19 @@ static ssize_t show_cons_active(struct d
 		if (i >= ARRAY_SIZE(cs))
 			break;
 	}
-	while (i--)
-		count += sprintf(buf + count, "%s%d%c",
-				 cs[i]->name, cs[i]->index, i ? ' ':'\n');
+	while (i--) {
+		int index = cs[i]->index;
+		struct tty_driver *drv = cs[i]->device(cs[i], &index);
+
+		/* don't resolve tty0 as some programs depend on it */
+		if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR))
+			count += tty_line_name(drv, index, buf + count);
+		else
+			count += sprintf(buf + count, "%s%d",
+					 cs[i]->name, cs[i]->index);
+
+		count += sprintf(buf + count, "%c", i ? ' ':'\n');
+	}
 	console_unlock();
 
 	return count;

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Claudio Takahasi <[email protected]>

commit 5981a8821b774ada0be512fd9bad7c241e17657e upstream.

This patch fixes authentication failure on LE link re-connection when BlueZ acts as slave (peripheral). LTK is removed from the internal list after its first use causing PIN or Key missing reply when re-connecting the link. The LE Long Term Key Request event indicates that the master is attempting to encrypt or re-encrypt the link.

Pre-condition: BlueZ host paired and running as slave. How to reproduce(master):

1) Establish an ACL LE encrypted link
2) Disconnect the link
3) Try to re-establish the ACL LE encrypted link (fails)

      LE Connection Complete (0x01)
        Status: Success (0x00)
        Handle: 64
        Role: Slave (0x01)

...
@ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000

      LE Long Term Key Request (0x05)
        Handle: 64
        Random number: 875be18439d9aa37
        Encryption diversifier: 0x76ed
< HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18
        Handle: 64
        Long term key: 2aa531db2fce9f00a0569c7d23d17409

      LE Long Term Key Request Reply (0x08|0x001a) ncmd 1
        Status: Success (0x00)
        Handle: 64

        Status: Success (0x00)
        Handle: 64
        Encryption: Enabled with AES-CCM (0x01)
...
@ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3
< HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1
        Advertising: Enabled (0x01)

      LE Set Advertise Enable (0x08|0x000a) ncmd 1
        Status: Success (0x00)

      LE Connection Complete (0x01)
        Status: Success (0x00)
        Handle: 64
        Role: Slave (0x01)

...
@ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000

      LE Long Term Key Request (0x05)
        Handle: 64
        Random number: 875be18439d9aa37
        Encryption diversifier: 0x76ed
< HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2
        Handle: 64

      LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1
        Status: Success (0x00)
        Handle: 64

        Status: Success (0x00)
        Handle: 64
        Reason: Authentication Failure (0x05)

@ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0

---
 net/bluetooth/hci_event.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

@@ -3619,7 +3619,13 @@ static void hci_le_ltk_request_evt(struc
 
 	hci_send_cmd(hdev, HCI_OP_LE_LTK_REPLY, sizeof(cp), &cp);
 
-	if (ltk->type & HCI_SMP_STK) {
+	/* Ref. Bluetooth Core SPEC pages 1975 and 2004. STK is a
+	 * temporary key used to encrypt a connection following
+	 * pairing. It is used during the Encrypted Session Setup to
+	 * distribute the keys. Later, security can be re-established
+	 * using a distributed LTK.
+	 */
+	if (ltk->type == HCI_SMP_STK_SLAVE) {
 		list_del(&ltk->list);
 		kfree(ltk);
 	}

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Derek Basehore <[email protected]>

commit 6ca738d60c563d5c6cf6253ee4b8e76fa77b2b9e upstream.

bdi_wakeup_thread_delayed() used the mod_delayed_work() function to schedule work to writeback dirty inodes. The problem with this is that it can delay work that is scheduled for immediate execution, such as the work from sync_inodes_sb(). This can happen since mod_delayed_work() can now steal work from a work_queue. This fixes the problem by using queue_delayed_work() instead. This is a regression caused by commit 839a8e8660b6 ("writeback: replace custom worker pool implementation with unbound workqueue").

The reason that this causes a problem is that laptop-mode will change the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default. In the case that bdi_wakeup_thread_delayed() races with sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung task. Even if dirty_writeback_centisecs is not long enough to cause a hung task, we still don't want to delay sync for that long.

We fix the problem by using queue_delayed_work() when we want to schedule writeback sometime in future. This function doesn't change the timer if it is already armed.

For the same reason, we also change bdi_writeback_workfn() to immediately queue the work again in the case that the work_list is not empty. The same problem can happen if the sync work is run on the rescue worker.

---
 fs/fs-writeback.c |    8 ++++----
 mm/backing-dev.c  |    5 ++++-
 2 files changed, 8 insertions(+), 5 deletions(-)

@@ -1038,10 +1038,10 @@ void bdi_writeback_workfn(struct work_st
 		trace_writeback_pages_written(pages_written);
 	}
 
-	if (!list_empty(&bdi->work_list) ||
-	    (wb_has_dirty_io(wb) && dirty_writeback_interval))
-		queue_delayed_work(bdi_wq, &wb->dwork,
-			msecs_to_jiffies(dirty_writeback_interval * 10));
+	if (!list_empty(&bdi->work_list))
+		mod_delayed_work(bdi_wq, &wb->dwork, 0);
+	else if (wb_has_dirty_io(wb) && dirty_writeback_interval)
+		bdi_wakeup_thread_delayed(bdi);
 
 	current->flags &= ~PF_SWAPWRITE;
 }

@@ -287,13 +287,16 @@ int bdi_has_dirty_io(struct backing_dev_
  * Note, we wouldn't bother setting up the timer, but this function is on the
  * fast-path (used by '__mark_inode_dirty()'), so we save few context switches
  * by delaying the wake-up.
+ *
+ * We have to be careful not to postpone flush work if it is scheduled for
+ * earlier. Thus we use queue_delayed_work().
  */
 void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi)
 {
 	unsigned long timeout;
 
 	timeout = msecs_to_jiffies(dirty_writeback_interval * 10);
-	mod_delayed_work(bdi_wq, &bdi->wb.dwork, timeout);
+	queue_delayed_work(bdi_wq, &bdi->wb.dwork, timeout);
 }
 
 /*

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

commit 5acda9d12dcf1ad0d9a5a2a7c646de3472fa7555 upstream.

After commit 839a8e8660b6 ("writeback: replace custom worker pool implementation with unbound workqueue") when device is removed while we are writing to it we crash in bdi_writeback_workfn() -> set_worker_desc() because bdi->dev is NULL.

This can happen because even though bdi_unregister() cancels all pending flushing work, nothing really prevents new ones from being queued from balance_dirty_pages() or other places.

Fix the problem by clearing BDI_registered bit in bdi_unregister() and checking it before scheduling of any flushing work.

---
 fs/fs-writeback.c           |   23 ++++++++++++++++++-----
 include/linux/backing-dev.h |    2 +-
 mm/backing-dev.c            |   13 +++++++++----
 3 files changed, 28 insertions(+), 10 deletions(-)

@@ -87,16 +87,29 @@ static inline struct inode *wb_inode(str
 #define CREATE_TRACE_POINTS
 #include <trace/events/writeback.h>
 
+static void bdi_wakeup_thread(struct backing_dev_info *bdi)
+{
+	spin_lock_bh(&bdi->wb_lock);
+	if (test_bit(BDI_registered, &bdi->state))
+		mod_delayed_work(bdi_wq, &bdi->wb.dwork, 0);
+	spin_unlock_bh(&bdi->wb_lock);
+}
+
 static void bdi_queue_work(struct backing_dev_info *bdi,
 			   struct wb_writeback_work *work)
 {
 	trace_writeback_queue(bdi, work);
 
 	spin_lock_bh(&bdi->wb_lock);
+	if (!test_bit(BDI_registered, &bdi->state)) {
+		if (work->done)
+			complete(work->done);
+		goto out_unlock;
+	}
 	list_add_tail(&work->list, &bdi->work_list);
-	spin_unlock_bh(&bdi->wb_lock);
-
 	mod_delayed_work(bdi_wq, &bdi->wb.dwork, 0);
+out_unlock:
+	spin_unlock_bh(&bdi->wb_lock);
 }
 
 static void

@@ -112,7 +125,7 @@ __bdi_start_writeback(struct backing_dev
 	work = kzalloc(sizeof(*work), GFP_ATOMIC);
 	if (!work) {
 		trace_writeback_nowork(bdi);
-		mod_delayed_work(bdi_wq, &bdi->wb.dwork, 0);
+		bdi_wakeup_thread(bdi);
 		return;
 	}
 

@@ -159,7 +172,7 @@ void bdi_start_background_writeback(stru
 	 * writeback as soon as there is no other work to do.
 	 */
 	trace_writeback_wake_background(bdi);
-	mod_delayed_work(bdi_wq, &bdi->wb.dwork, 0);
+	bdi_wakeup_thread(bdi);
 }
 
 /*

@@ -1016,7 +1029,7 @@ void bdi_writeback_workfn(struct work_st
 	current->flags |= PF_SWAPWRITE;
 
 	if (likely(!current_is_workqueue_rescuer() ||
-		   list_empty(&bdi->bdi_list))) {
+		   !test_bit(BDI_registered, &bdi->state))) {
 		/*
 		 * The normal path.  Keep writing back @bdi until its
 		 * work_list is empty.  Note that this path is also taken

@@ -95,7 +95,7 @@ struct backing_dev_info {
 	unsigned int max_ratio, max_prop_frac;
 
 	struct bdi_writeback wb;  /* default writeback info for this bdi */
-	spinlock_t wb_lock;	  /* protects work_list */
+	spinlock_t wb_lock;	  /* protects work_list & wb.dwork scheduling */
 
 	struct list_head work_list;
 

@@ -296,7 +296,10 @@ void bdi_wakeup_thread_delayed(struct ba
 	unsigned long timeout;
 
 	timeout = msecs_to_jiffies(dirty_writeback_interval * 10);
-	queue_delayed_work(bdi_wq, &bdi->wb.dwork, timeout);
+	spin_lock_bh(&bdi->wb_lock);
+	if (test_bit(BDI_registered, &bdi->state))
+		queue_delayed_work(bdi_wq, &bdi->wb.dwork, timeout);
+	spin_unlock_bh(&bdi->wb_lock);
 }
 
 /*

@@ -309,9 +312,6 @@ static void bdi_remove_from_list(struct
 	spin_unlock_bh(&bdi_lock);
 
 	synchronize_rcu_expedited();
-
-	/* bdi_list is now unused, clear it to mark @bdi dying */
-	INIT_LIST_HEAD(&bdi->bdi_list);
 }
 
 int bdi_register(struct backing_dev_info *bdi, struct device *parent,

@@ -362,6 +362,11 @@ static void bdi_wb_shutdown(struct backi
 	 */
 	bdi_remove_from_list(bdi);
 
+	/* Make sure nobody queues further work */
+	spin_lock_bh(&bdi->wb_lock);
+	clear_bit(BDI_registered, &bdi->state);
+	spin_unlock_bh(&bdi->wb_lock);
+
 	/*
 	 * Drain work list and shutdown the delayed_work.  At this point,
 	 * @bdi->bdi_list is empty telling bdi_Writeback_workfn() that @bdi

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hidetoshi Seto <[email protected]>

commit f88ba6a2a44ee98e8d59654463dc157bb6d13c43 upstream.

I got an error on v3.13:
BTRFS error (device sdf1) in write_all_supers:3378: errno=-5 IO failure (errors while submitting device barriers.)

how to reproduce:

The reason of the error is that barrier_all_devices() failed to submit barrier to the missing device. However it is clear that we cannot do anything on missing device, and also it is not necessary to care chunks on the missing device.

This patch stops sending/waiting barrier if device is missing.

---
 fs/btrfs/disk-io.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -3161,6 +3161,8 @@ static int barrier_all_devices(struct bt
 	/* send down all the barriers */
 	head = &info->fs_devices->devices;
 	list_for_each_entry_rcu(dev, head, dev_list) {
+		if (dev->missing)
+			continue;
 		if (!dev->bdev) {
 			errors_send++;
 			continue;

@@ -3175,6 +3177,8 @@ static int barrier_all_devices(struct bt
 
 	/* wait for all the barriers */
 	list_for_each_entry_rcu(dev, head, dev_list) {
+		if (dev->missing)
+			continue;
 		if (!dev->bdev) {
 			errors_wait++;
 			continue;

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Whitney <[email protected]>

commit ce37c42919608e96ade3748fe23c3062a0a966c5 upstream.

Commit 3779473246 breaks the return of error codes from ext4_ext_handle_uninitialized_extents() in ext4_ext_map_blocks(). A portion of the patch assigns that function's signed integer return value to an unsigned int. Consequently, negatively valued error codes are lost and can be treated as a bogus allocated block count.

---
 fs/ext4/extents.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -4032,7 +4032,7 @@ int ext4_ext_map_blocks(handle_t *handle
 	struct ext4_extent newex, *ex, *ex2;
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	ext4_fsblk_t newblock = 0;
-	int free_on_err = 0, err = 0, depth;
+	int free_on_err = 0, err = 0, depth, ret;
 	unsigned int allocated = 0, offset = 0;
 	unsigned int allocated_clusters = 0;
 	struct ext4_allocation_request ar;

@@ -4093,9 +4093,13 @@ int ext4_ext_map_blocks(handle_t *handle
 			if (!ext4_ext_is_uninitialized(ex))
 				goto out;
 
-			allocated = ext4_ext_handle_uninitialized_extents(
+			ret = ext4_ext_handle_uninitialized_extents(
 				handle, inode, map, path, flags,
 				allocated, newblock);
+			if (ret < 0)
+				err = ret;
+			else
+				allocated = ret;
 			goto out3;
 		}
 	}

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Whitney <[email protected]>

commit c06344939422bbd032ac967223a7863de57496b5 upstream.

Commit 9cb00419fa, which enables hole punching for bigalloc file systems, exposed a bug introduced by commit 6ae06ff51e in an earlier release. When run on a bigalloc file system, xfstests generic/013, 068, 075, 083, 091, 100, 112, 127, 263, 269, and 270 fail with e2fsck errors or cause kernel error messages indicating that previously freed blocks are being freed again.

The latter commit optimizes the selection of the starting extent in ext4_ext_rm_leaf() when hole punching by beginning with the extent supplied in the path argument rather than with the last extent in the leaf node (as is still done when truncating). However, the code in rm_leaf that initially sets partial_cluster to track cluster sharing on extent boundaries is only guaranteed to run if rm_leaf starts with the last node in the leaf. Consequently, partial_cluster is not correctly initialized when hole punching, and a cluster on the boundary of a punched region that should be retained may instead be deallocated.

---
 fs/ext4/extents.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

@@ -2511,6 +2511,27 @@ ext4_ext_rm_leaf(handle_t *handle, struc
 	ex_ee_block = le32_to_cpu(ex->ee_block);
 	ex_ee_len = ext4_ext_get_actual_len(ex);
 
+	/*
+	 * If we're starting with an extent other than the last one in the
+	 * node, we need to see if it shares a cluster with the extent to
+	 * the right (towards the end of the file). If its leftmost cluster
+	 * is this extent's rightmost cluster and it is not cluster aligned,
+	 * we'll mark it as a partial that is not to be deallocated.
+	 */
+
+	if (ex != EXT_LAST_EXTENT(eh)) {
+		ext4_fsblk_t current_pblk, right_pblk;
+		long long current_cluster, right_cluster;
+
+		current_pblk = ext4_ext_pblock(ex) + ex_ee_len - 1;
+		current_cluster = (long long)EXT4_B2C(sbi, current_pblk);
+		right_pblk = ext4_ext_pblock(ex + 1);
+		right_cluster = (long long)EXT4_B2C(sbi, right_pblk);
+		if (current_cluster == right_cluster &&
+			EXT4_PBLK_COFF(sbi, right_pblk))
+			*partial_cluster = -right_cluster;
+	}
+
 	trace_ext4_ext_rm_leaf(inode, start, ex, *partial_cluster);
 
 	while (ex >= EXT_FIRST_EXTENT(eh) &&

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kamlakant Patel <[email protected]>

commit 3367da5610c50e6b83f86d366d72b41b350b06a2 upstream.

Creating a large file on a JFFS2 partition sometimes crashes with this call trace:

[  306.476000] CPU 13 Unable to handle kernel paging request at virtual address c0000000dfff8002, epc == ffffffffc03a80a8, ra == ffffffffc03a8044
[  306.488000] Oops[#1]:
[  306.488000] Cpu 13
[  306.492000] $ 0   : 0000000000000000 0000000000000000 0000000000008008 0000000000008007
[  306.500000] $ 4   : c0000000dfff8002 000000000000009f c0000000e0007cde c0000000ee95fa58
[  306.508000] $ 8   : 0000000000000001 0000000000008008 0000000000010000 ffffffffffff8002
[  306.516000] $12   : 0000000000007fa9 000000000000ff0e 000000000000ff0f 80e55930aebb92bb
[  306.524000] $16   : c0000000e0000000 c0000000ee95fa5c c0000000efc80000 ffffffffc09edd70
[  306.532000] $20   : ffffffffc2b60000 c0000000ee95fa58 0000000000000000 c0000000efc80000
[  306.540000] $24   : 0000000000000000 0000000000000004
[  306.548000] $28   : c0000000ee950000 c0000000ee95f738 0000000000000000 ffffffffc03a8044
[  306.556000] Hi    : 00000000000574a5
[  306.560000] Lo    : 6193b7a7e903d8c9
[  306.564000] epc   : ffffffffc03a80a8 jffs2_rtime_compress+0x98/0x198
[  306.568000]     Tainted: G        W
[  306.572000] ra    : ffffffffc03a8044 jffs2_rtime_compress+0x34/0x198
[  306.580000] Status: 5000f8e3    KX SX UX KERNEL EXL IE
[  306.584000] Cause : 00800008
[  306.588000] BadVA : c0000000dfff8002
[  306.592000] PrId  : 000c1100 (Netlogic XLP)
[  306.596000] Modules linked in:
[  306.596000] Process dd (pid: 170, threadinfo=c0000000ee950000, task=c0000000ee6e0858, tls=0000000000c47490)
[  306.608000] Stack : 7c547f377ddc7ee4 7ffc7f967f5d7fae 7f617f507fc37ff4 7e7d7f817f487f5f
        7d8e7fec7ee87eb3 7e977ff27eec7f9e 7d677ec67f917f67 7f3d7e457f017ed7
        7fd37f517f867eb2 7fed7fd17ca57e1d 7e5f7fe87f257f77 7fd77f0d7ede7fdb
        7fba7fef7e197f99 7fde7fe07ee37eb5 7f5c7f8c7fc67f65 7f457fb87f847e93
        7f737f3e7d137cd9 7f8e7e9c7fc47d25 7dbb7fac7fb67e52 7ff17f627da97f64
        7f6b7df77ffa7ec5 80057ef17f357fb3 7f767fa27dfc7fd5 7fe37e8e7fd07e53
        7e227fcf7efb7fa1 7f547e787fa87fcc 7fcb7fc57f5a7ffb 7fc07f6c7ea97e80
        7e2d7ed17e587ee0 7fb17f9d7feb7f31 7f607e797e887faa 7f757fdd7c607ff3
        7e877e657ef37fbd 7ec17fd67fe67ff7 7ff67f797ff87dc4 7eef7f3a7c337fa6
        7fe57fc97ed87f4b 7ebe7f097f0b8003 7fe97e2a7d997cba 7f587f987f3c7fa9
        ...
[  306.676000] Call Trace:
[  306.680000] [<ffffffffc03a80a8>] jffs2_rtime_compress+0x98/0x198
[  306.684000] [<ffffffffc0394f10>] jffs2_selected_compress+0x110/0x230
[  306.692000] [<ffffffffc039508c>] jffs2_compress+0x5c/0x388
[  306.696000] [<ffffffffc039dc58>] jffs2_write_inode_range+0xd8/0x388
[  306.704000] [<ffffffffc03971bc>] jffs2_write_end+0x16c/0x2d0
[  306.708000] [<ffffffffc01d3d90>] generic_file_buffered_write+0xf8/0x2b8
[  306.716000] [<ffffffffc01d4e7c>] __generic_file_aio_write+0x1ac/0x350
[  306.720000] [<ffffffffc01d50a0>] generic_file_aio_write+0x80/0x168
[  306.728000] [<ffffffffc021f7dc>] do_sync_write+0x94/0xf8
[  306.732000] [<ffffffffc021ff6c>] vfs_write+0xa4/0x1a0
[  306.736000] [<ffffffffc02202e8>] SyS_write+0x50/0x90
[  306.744000] [<ffffffffc0116cc0>] handle_sys+0x180/0x1a0
[  306.748000]
[  306.748000]
Code: 020b202d  0205282d  90a50000 <90840000> 14a40038  00000000  0060602d  0000282d  016c5823
[  306.760000] ---[ end trace 79dd088435be02d0 ]---

Segmentation fault

This crash is caused because the 'positions' is declared as an array of signed short. The value of position is in the range 0..65535, and will be converted to a negative number when the position is greater than 32767 and causes a corruption and crash. Changing the definition to 'unsigned short' fixes this issue

---
 fs/jffs2/compr_rtime.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -33,7 +33,7 @@ static int jffs2_rtime_compress(unsigned
 				unsigned char *cpage_out,
 				uint32_t *sourcelen, uint32_t *dstlen)
 {
-	short positions[256];
+	unsigned short positions[256];
 	int outpos = 0;
 	int pos=0;
 

@@ -74,7 +74,7 @@ static int jffs2_rtime_decompress(unsign
 				  unsigned char *cpage_out,
 				  uint32_t srclen, uint32_t destlen)
 {
-	short positions[256];
+	unsigned short positions[256];
 	int outpos = 0;
 	int pos=0;
 

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ajesh Kunhipurayil Vijayan <[email protected]>

commit 41bf1a24c1001f4d0d41a78e1ac575d2f14789d7 upstream.

mounting JFFS2 partition sometimes crashes with this call trace:

[ 1322.240000] Kernel bug detected[#1]:
[ 1322.244000] Cpu 2
[ 1322.244000] $ 0   : 0000000000000000 0000000000000018 000000003ff00070 0000000000000001
[ 1322.252000] $ 4   : 0000000000000000 c0000000f3980150 0000000000000000 0000000000010000
[ 1322.260000] $ 8   : ffffffffc09cd5f8 0000000000000001 0000000000000088 c0000000ed300de8
[ 1322.268000] $12   : e5e19d9c5f613a45 ffffffffc046d464 0000000000000000 66227ba5ea67b74e
[ 1322.276000] $16   : c0000000f1769c00 c0000000ed1e0200 c0000000f3980150 0000000000000000
[ 1322.284000] $20   : c0000000f3a80000 00000000fffffffc c0000000ed2cfbd8 c0000000f39818f0
[ 1322.292000] $24   : 0000000000000004 0000000000000000
[ 1322.300000] $28   : c0000000ed2c0000 c0000000ed2cfab8 0000000000010000 ffffffffc039c0b0
[ 1322.308000] Hi    : 000000000000023c
[ 1322.312000] Lo    : 000000000003f802
[ 1322.316000] epc   : ffffffffc039a9f8 check_tn_node+0x88/0x3b0
[ 1322.320000]     Not tainted
[ 1322.324000] ra    : ffffffffc039c0b0 jffs2_do_read_inode_internal+0x1250/0x1e48
[ 1322.332000] Status: 5400f8e3    KX SX UX KERNEL EXL IE
[ 1322.336000] Cause : 00800034
[ 1322.340000] PrId  : 000c1004 (Netlogic XLP)
[ 1322.344000] Modules linked in:
[ 1322.348000] Process jffs2_gcd_mtd7 (pid: 264, threadinfo=c0000000ed2c0000, task=c0000000f0e68dd8, tls=0000000000000000)
[ 1322.356000] Stack : c0000000f1769e30 c0000000ed010780 c0000000ed010780 c0000000ed300000
        c0000000f1769c00 c0000000f3980150 c0000000f3a80000 00000000fffffffc
        c0000000ed2cfbd8 ffffffffc039c0b0 ffffffffc09c6340 0000000000001000
        0000000000000dec ffffffffc016c9d8 c0000000f39805a0 c0000000f3980180
        0000008600000000 0000000000000000 0000000000000000 0000000000000000
        0001000000000dec c0000000f1769d98 c0000000ed2cfb18 0000000000010000
        0000000000010000 0000000000000044 c0000000f3a80000 c0000000f1769c00
        c0000000f3d207a8 c0000000f1769d98 c0000000f1769de0 ffffffffc076f9c0
        0000000000000009 0000000000000000 0000000000000000 ffffffffc039cf90
        0000000000000017 ffffffffc013fbdc 0000000000000001 000000010003e61c
        ...
[ 1322.424000] Call Trace:
[ 1322.428000] [<ffffffffc039a9f8>] check_tn_node+0x88/0x3b0
[ 1322.432000] [<ffffffffc039c0b0>] jffs2_do_read_inode_internal+0x1250/0x1e48
[ 1322.440000] [<ffffffffc039cf90>] jffs2_do_crccheck_inode+0x70/0xd0
[ 1322.448000] [<ffffffffc03a1b80>] jffs2_garbage_collect_pass+0x160/0x870
[ 1322.452000] [<ffffffffc03a392c>] jffs2_garbage_collect_thread+0xdc/0x1f0
[ 1322.460000] [<ffffffffc01541c8>] kthread+0xb8/0xc0
[ 1322.464000] [<ffffffffc0106d18>] kernel_thread_helper+0x10/0x18
[ 1322.472000]
[ 1322.472000]
Code: 67bd0050  94a4002c  2c830001 <00038036> de050218  2403fffc  0080a82d  00431824  24630044
[ 1322.480000] ---[ end trace b052bb90e97dfbf5 ]---

The variable csize in structure jffs2_tmp_dnode_info is of type uint16_t, but it is used to hold the compressed data length(csize) which is declared as uint32_t. So, when the value of csize exceeds 16bits, it gets truncated when assigned to tn->csize. This is causing a kernel BUG.
Changing the definition of csize in jffs2_tmp_dnode_info to uint32_t fixes the issue.

---
 fs/jffs2/nodelist.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -231,7 +231,7 @@ struct jffs2_tmp_dnode_info
 	uint32_t version;
 	uint32_t data_crc;
 	uint32_t partial_crc;
-	uint16_t csize;
+	uint32_t csize;
 	uint16_t overlapped;
 };
 

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Li Zefan <[email protected]>

commit 13b546d96207c131eeae15dc7b26c6e7d0f1cad7 upstream.

We triggered soft-lockup under stress test on 2.6.34 kernel.

BUG: soft lockup - CPU#1 stuck for 60009ms! [lockf2.test:14488]

...
[<bf09a4d4>] (jffs2_do_reserve_space+0x420/0x440 [jffs2]) [<bf09a528>] (jffs2_reserve_space_gc+0x34/0x78 [jffs2]) [<bf0a1350>] (jffs2_garbage_collect_dnode.isra.3+0x264/0x478 [jffs2]) [<bf0a2078>] (jffs2_garbage_collect_pass+0x9c0/0xe4c [jffs2]) [<bf09a670>] (jffs2_reserve_space+0x104/0x2a8 [jffs2]) [<bf09dc48>] (jffs2_write_inode_range+0x5c/0x4d4 [jffs2]) [<bf097d8c>] (jffs2_write_end+0x198/0x2c0 [jffs2]) [<c00e00a4>] (generic_file_buffered_write+0x158/0x200) [<c00e14f4>] (__generic_file_aio_write+0x3a4/0x414) [<c00e15c0>] (generic_file_aio_write+0x5c/0xbc) [<c012334c>] (do_sync_write+0x98/0xd4)
[<c0123a84>] (vfs_write+0xa8/0x150)
[<c0123d74>] (sys_write+0x3c/0xc0)]

Fix this by adding a cond_resched() in the while loop.

---
 fs/jffs2/nodemgmt.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

@@ -211,20 +211,25 @@ out:
 int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize,
 			   uint32_t *len, uint32_t sumsize)
 {
-	int ret = -EAGAIN;
+	int ret;
 	minsize = PAD(minsize);
 
 	jffs2_dbg(1, "%s(): Requested 0x%x bytes\n", __func__, minsize);
 
-	spin_lock(&c->erase_completion_lock);
-	while(ret == -EAGAIN) {
+	while (true) {
+		spin_lock(&c->erase_completion_lock);
 		ret = jffs2_do_reserve_space(c, minsize, len, sumsize);
 		if (ret) {
 			jffs2_dbg(1, "%s(): looping, ret is %d\n",
 				  __func__, ret);
 		}
+		spin_unlock(&c->erase_completion_lock);
+
+		if (ret == -EAGAIN)
+			cond_resched();
+		else
+			break;
 	}
-	spin_unlock(&c->erase_completion_lock);
 	if (!ret)
 		ret = jffs2_prealloc_raw_node_refs(c, c->nextblock, 1);
 

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Li Zefan <[email protected]>

commit 3ead9578443b66ddb3d50ed4f53af8a0c0298ec5 upstream.

@wait is a local variable, so if we don't remove it from the wait queue list, later wake_up() may end up accessing invalid memory.

This was spotted by eyes.

---
 fs/jffs2/nodemgmt.c |    1 +
 1 file changed, 1 insertion(+)

@@ -179,6 +179,7 @@ int jffs2_reserve_space(struct jffs2_sb_
 					spin_unlock(&c->erase_completion_lock);
 
 					schedule();
+					remove_wait_queue(&c->erase_wait, &wait);
 				} else
 					spin_unlock(&c->erase_completion_lock);
 			} else if (ret)

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: oftedal <[email protected]>

[ Upstream commit 557fc5873ef178c4b3e1e36a42db547ecdc43f9b ]

The SIMBA APB Bridges lacks the 'ranges' of-property describing the PCI I/O and memory areas located beneath the bridge. Faking this information has been performed by reading range registers in the APB bridge, and calculating the corresponding areas.

In commit 01f94c4a6ced476ce69b895426fc29bfc48c69bd ("Fix sabre pci controllers with new probing scheme.") a bug was introduced into this calculation, causing the PCI memory areas to be calculated incorrectly: The shift size was set to be identical for I/O and MEM ranges, which is incorrect.

This patch set the shift size of the MEM range back to the value used before 01f94c4a6ced476ce69b895426fc29bfc48c69bd.

---
 arch/sparc/kernel/pci.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -399,8 +399,8 @@ static void apb_fake_ranges(struct pci_d
 	apb_calc_first_last(map, &first, &last);
 	res = bus->resource[1];
 	res->flags = IORESOURCE_MEM;
-	region.start = (first << 21);
-	region.end = (last << 21) + ((1 << 21) - 1);
+	region.start = (first << 29);
+	region.end = (last << 29) + ((1 << 29) - 1);
 	pcibios_bus_to_resource(dev, res, &region);
 }
 

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Kleikamp <[email protected]>

[ Upstream commit 16932237f2978a2265662f8de4af743b1f55a209 ]

This reverts commit 145e1c0023585e0e8f6df22316308ec61c5066b2.

This commit broke the behavior of __copy_from_user_inatomic when it is only partially successful. Instead of returning the number of bytes not copied, it now returns 1. This translates to the wrong value being returned by iov_iter_copy_from_user_atomic.

xfstests generic/246 and LTP writev01 both fail on btrfs and nfs because of this.

---
 arch/sparc/include/asm/uaccess_64.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -262,8 +262,8 @@ extern unsigned long __must_check __clea
 extern __must_check long strlen_user(const char __user *str);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
-#define __copy_to_user_inatomic ___copy_to_user
-#define __copy_from_user_inatomic ___copy_from_user
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
 
 struct pt_regs;
 extern unsigned long compute_effective_address(struct pt_regs *,

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Gortmaker <[email protected]>

[ Upstream commit 4f6500fff5f7644a03c46728fd7ef0f62fa6940b ]

In arch/sparc/Kernel/Makefile, we see:

   obj-$(CONFIG_SPARC64)   += jump_label.o

However, the Kconfig selects HAVE_ARCH_JUMP_LABEL unconditionally for all SPARC. This in turn leads to the following failure when doing allmodconfig coverage builds:

kernel/built-in.o: In function `__jump_label_update':
jump_label.c:(.text+0x8560c): undefined reference to arch_jump_label_transform' kernel/built-in.o: In function arch_jump_label_transform_static':
(.text+0x85cf4): undefined reference to `arch_jump_label_transform'
make: *** [vmlinux] Error 1

Change HAVE_ARCH_JUMP_LABEL to be conditional on SPARC64 so that it matches the Makefile.

---
 arch/sparc/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -25,7 +25,7 @@ config SPARC
 	select RTC_DRV_M48T59
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
-	select HAVE_ARCH_JUMP_LABEL
+	select HAVE_ARCH_JUMP_LABEL if SPARC64
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Kleikamp <[email protected]>

[ Upstream commit 1535bd8adbdedd60a0ee62e28fd5225d66434371 ]

When checking a system call return code for an error, linux_sparc_syscall was sign-extending the lower 32-bit value and comparing it to -ERESTART_RESTARTBLOCK. lseek can return valid return codes whose lower 32-bits alone would indicate a failure (such as 4G-1). Use the whole 64-bit value to check for errors. Only the 32-bit path should sign extend the lower 32-bit value.

---
 arch/sparc/kernel/syscalls.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -189,7 +189,8 @@ linux_sparc_syscall32:
 	 mov	%i0, %l5				! IEU1
 5:	call	%l7					! CTI	Group brk forced
 	 srl	%i5, 0, %o5				! IEU1
-	ba,a,pt	%xcc, 3f
+	ba,pt	%xcc, 3f
+	 sra	%o0, 0, %o0
 
 	/* Linux native system calls enter here... */
 	.align	32

@@ -217,7 +218,6 @@ linux_sparc_syscall:
 3:	stx	%o0, [%sp + PTREGS_OFF + PT_V9_I0]
 ret_sys_call:
 	ldx	[%sp + PTREGS_OFF + PT_V9_TSTATE], %g3
-	sra	%o0, 0, %o0
 	mov	%ulo(TSTATE_XCARRY | TSTATE_ICARRY), %g2
 	sllx	%g2, 32, %g2
 

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: "David S. Miller" <[email protected]>

[ Upstream commit cb3042d609e30e6144024801c89be3925106752b ]

In arch_cpu_idle() we must enable %pil based interrupts before potentially invoking the hypervisor cpu yield call.

As per the Hypervisor API documentation for cpu_yield:

Interrupts which are blocked by some mechanism other that pstate.ie (for example %pil) are not guaranteed to cause a return from this service.

It seems that only first generation Niagara chips are hit by this bug. My best guess is that later chips implement this in hardware and wake up anyways from %pil events, whereas in first generation chips the yield is implemented completely in hypervisor code and requires %pil to be enabled in order to wake properly from this call.

---
 arch/sparc/kernel/process_64.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -57,9 +57,12 @@ void arch_cpu_idle(void)
 {
 	if (tlb_type != hypervisor) {
 		touch_nmi_watchdog();
+		local_irq_enable();
 	} else {
 		unsigned long pstate;
 
+		local_irq_enable();
+
                 /* The sun4v sleeping code requires that we have PSTATE.IE cleared over
                  * the cpu sleep hypervisor call.
                  */

@@ -81,7 +84,6 @@ void arch_cpu_idle(void)
 			: "=&r" (pstate)
 			: "i" (PSTATE_IE));
 	}
-	local_irq_enable();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <[email protected]>

commit dfccbb5e49a621c1b21a62527d61fc4305617aca upstream.

wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and drops tasklist_lock. If this task is not the natural child and it is traced, we change its state back to EXIT_ZOMBIE for ->real_parent.

The last transition is racy, this is even documented in 50b8d257486a "ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race". wait_consider_task() tries to detect this transition and clear ->notask_error but we can't rely on ptrace_reparented(), debugger can exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE.

And there is another problem which were missed before: this transition can also race with reparent_leader() which doesn't reset >exit_signal if EXIT_DEAD, assuming that this task must be reaped by someone else. So the tracee can be re-parented with ->exit_signal != SIGCHLD, and if /sbin/init doesn't use __WALL it becomes unreapable.

Change reparent_leader() to update ->exit_signal even if EXIT_DEAD.
Note: this is the simple temporary hack for -stable, it doesn't try to solve all problems, it will be reverted by the next changes.

---
 kernel/exit.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

@@ -570,9 +570,6 @@ static void reparent_leader(struct task_
 				struct list_head *dead)
 {
 	list_move_tail(&p->sibling, &p->real_parent->children);
-
-	if (p->exit_state == EXIT_DEAD)
-		return;
 	/*
 	 * If this is a threaded reparent there is no need to
 	 * notify anyone anything has happened.

@@ -580,9 +577,19 @@ static void reparent_leader(struct task_
 	if (same_thread_group(p->real_parent, father))
 		return;
 
-	/* We don't want people slaying init.  */
+	/*
+	 * We don't want people slaying init.
+	 *
+	 * Note: we do this even if it is EXIT_DEAD, wait_task_zombie()
+	 * can change ->exit_state to EXIT_ZOMBIE. If this is the final
+	 * state, do_notify_parent() was already called and ->exit_signal
+	 * doesn't matter.
+	 */
 	p->exit_signal = SIGCHLD;
 
+	if (p->exit_state == EXIT_DEAD)
+		return;
+
 	/* If it has exited notify the new parent about this child's death. */
 	if (!p->ptrace &&
 	    p->exit_state == EXIT_ZOMBIE && thread_group_empty(p)) {

3.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <[email protected]>

commit c39df5fa37b0623589508c95515b4aa1531c524e upstream.

Commit 8aac62706ada ("move exit_task_namespaces() outside of exit_notify()") breaks pppd and the exiting service crashes the kernel:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
    IP: ppp_register_channel+0x13/0x20 [ppp_generic]
    Call Trace:
      ppp_asynctty_open+0x12b/0x170 [ppp_async]
      tty_ldisc_open.isra.2+0x27/0x60
      tty_ldisc_hangup+0x1e3/0x220
      __tty_hangup+0x2c4/0x440
      disassociate_ctty+0x61/0x270
      do_exit+0x7f2/0xa50

ppp_register_channel() needs ->net_ns and current->nsproxy == NULL.

Move disassociate_ctty() before exit_task_namespaces(), it doesn't make sense to delay it after perf_event_exit_task() or cgroup_exit().

This also allows to use task_work_add() inside the (nontrivial) code paths in disassociate_ctty().

Investigated by Peter Hurley.

---
 kernel/exit.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

@@ -801,6 +801,8 @@ void do_exit(long code)
 	exit_shm(tsk);
 	exit_files(tsk);
 	exit_fs(tsk);
+	if (group_dead)
+		disassociate_ctty(1);
 	exit_task_namespaces(tsk);
 	exit_task_work(tsk);
 	check_stack_usage();

@@ -816,13 +818,9 @@ void do_exit(long code)
 
 	cgroup_exit(tsk, 1);
 
-	if (group_dead)
-		disassociate_ctty(1);
-
 	module_put(task_thread_info(tsk)->exec_domain->module);
 
 	proc_exit_connector(tsk);
-
 	/*
 	 * FIXME: do that only when needed, using sched_exit tracepoint
 	 */

Build results:

	total: 126 pass: 122 skipped: 4 fail: 0

Qemu tests all passed. Results are as expected.

Details are available at http://server.roeck-us.net:8010/builders.

But wait ... I have 24 patches in this series, not 23. Did you add one ?

Guenter

I count 23, I removed one a few days ago, did your scrips miss that?

thanks for testing,

greg k-h

Yes, looks like it (for both releases). Wonder what happened. I'll update manually and let you know if there are any problems.

Guenter

Compiled and booted. No dmesg regressions.

-- Shuah

Shuah Khan
Senior Linux Kernel Developer - Open Source Group
Samsung Research America(Silicon Valley)
[email protected] | (970) 672-0658