Skip to contentSkip to conversation

ARM: tegra: use correct audio CODEC on Jetson TK1

PATCH New Stephen Warren 2 participants 3 messages Apr 25, 2014 – Apr 28, 2014

Subsystems (2)
Device tree bindings Tegra architecture support
lore
Share & tools
lore

Stephen Warren

author
#0 lore raw

PATCH 1/1 ARM: tegra: use correct audio CODEC on Jetson TK1

From: Stephen Warren <[email protected]>

Jetson TK1 contains an RT5639 not an RT5640. While the two are extremely similar and mostly compatible, we should still use the correct device name in the device tree. I had meant to fix this before applying the initial DT, but this issue slipped my mind.

Signed-off-by Stephen Warren <[email protected]>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/tegra124-jetson-tk1.dts +3 -3
index dd3076d94727..b8931f0ee026 100644
@@ -1346,8 +1346,8 @@
 		status = "okay";
 		clock-frequency = <100000>;
 
-		rt5640: audio-codec at 1c {
-			compatible = "realtek,rt5640";
+		rt5639: audio-codec at 1c {
+			compatible = "realtek,rt5639";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;

@@ -1779,7 +1779,7 @@
 			"IN2P", "Mic Jack";
 
 		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&rt5640>;
+		nvidia,audio-codec = <&rt5639>;
 
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
Signature · 1 line
1.8.1.5
#1 lore raw

PATCH 1/1 ARM: tegra: use correct audio CODEC on Jetson TK1

Quoted 11 lines · Stephen Warren

From: Stephen Warren <[email protected]>

Jetson TK1 contains an RT5639 not an RT5640. While the two are extremely similar and mostly compatible, we should still use the correct device name in the device tree. I had meant to fix this before applying the initial DT, but this issue slipped my mind.

Signed-off-by Stephen Warren <[email protected]>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Reviewed-by Thierry Reding <[email protected]>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140426/d8cb5e3b/attachment.sig>

author Applied
#2 lore raw

PATCH 1/1 ARM: tegra: use correct audio CODEC on Jetson TK1

In reply to Stephen Warren
Quoted 4 lines · Stephen Warren

Jetson TK1 contains an RT5639 not an RT5640. While the two are extremely similar and mostly compatible, we should still use the correct device name in the device tree. I had meant to fix this before applying the initial DT, but this issue slipped my mind.

I have applied this to Tegra's for-3.16/dt branch.