jbd2: prefix printks with JBD2: not JBD:
PATCH 1/1 jbd2: prefix printks with JBD2: not JBD:
I was looking at some debugging logs from a test on ext4, and wondered why I saw messages from JBD: not JBD2:
This is why! Probably worth changing for consistency.
---
fs/jbd2/journal.c +5 -5
@@ -1527,13 +1527,13 @@ static int journal_get_superblock(journal_t *journal)if (JBD2_HAS_COMPAT_FEATURE (journal,JBD2_FEATURE_COMPAT_CHECKSUM ) &&JBD2_HAS_INCOMPAT_FEATURE (journal,JBD2_FEATURE_INCOMPAT_CSUM_V2 )) {/* Can't have checksum v1 and v2 on at the same time! */ -printk (KERN_ERR "JBD: Can't enable checksumming v1 and v2 " +printk (KERN_ERR "JBD2: Can't enable checksumming v1 and v2 " "at the same time!\n" ); goto out; }if (!jbd2_verify_csum_type (journal, sb)) { -printk (KERN_ERR "JBD: Unknown checksum type\n" ); +printk (KERN_ERR "JBD2: Unknown checksum type\n" ); goto out; }
@@ -1541,7 +1541,7 @@ static int journal_get_superblock(journal_t *journal)if (JBD2_HAS_INCOMPAT_FEATURE (journal,JBD2_FEATURE_INCOMPAT_CSUM_V2 )) { journal->j_chksum_driver =crypto_alloc_shash ("crc32c" ,0 ,0 );if (IS_ERR (journal->j_chksum_driver)) { -printk (KERN_ERR "JBD: Cannot load crc32c driver.\n" ); +printk (KERN_ERR "JBD2: Cannot load crc32c driver.\n" ); err =PTR_ERR (journal->j_chksum_driver); journal->j_chksum_driver =NULL ; goto out;
@@ -1550,7 +1550,7 @@ static int journal_get_superblock(journal_t *journal)/* Check superblock checksum */ if (!jbd2_superblock_csum_verify (journal, sb)) { -printk (KERN_ERR "JBD: journal checksum error\n" ); +printk (KERN_ERR "JBD2: journal checksum error\n" ); goto out; }
@@ -1836,7 +1836,7 @@ int jbd2_journal_set_features (journal_t *journal, unsigned long compat, journal->j_chksum_driver =crypto_alloc_shash ("crc32c" ,0 ,0 );if (IS_ERR (journal->j_chksum_driver)) { -printk (KERN_ERR "JBD: Cannot load crc32c " +printk (KERN_ERR "JBD2: Cannot load crc32c " "driver.\n" ); journal->j_chksum_driver =NULL ;return 0 ;
fs/jbd2/recovery.c +1 -1
@@ -594,7 +594,7 @@ static int do_one_pass(journal_t *journal, be32_to_cpu(tmp->h_sequence))) {brelse (obh); success = -EIO ; -printk (KERN_ERR "JBD: Invalid " +printk (KERN_ERR "JBD2: Invalid " "checksum recovering " "block %llu in log\n" , blocknr);
fs/jbd2/transaction.c +3 -3
@@ -1305,7 +1305,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh)JBUFFER_TRACE (jh,"fastpath" );if (unlikely (jh->b_transaction != journal->j_running_transaction)) { - printk(KERN_EMERG "JBD: %s: " + printk(KERN_EMERG "JBD2: %s: " "jh->b_transaction (%llu, %p, %u) != " "journal->j_running_transaction (%p, %u)", journal->j_devname,
@@ -1332,7 +1332,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh)JBUFFER_TRACE (jh,"already on other transaction" );if (unlikely (jh->b_transaction != journal->j_committing_transaction)) { - printk(KERN_EMERG "JBD: %s: " + printk(KERN_EMERG "JBD2: %s: " "jh->b_transaction (%llu, %p, %u) != " "journal->j_committing_transaction (%p, %u)", journal->j_devname,
@@ -1345,7 +1345,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh) ret = -EINVAL ; }if (unlikely (jh->b_next_transaction != transaction)) { - printk(KERN_EMERG "JBD: %s: " + printk(KERN_EMERG "JBD2: %s: " "jh->b_next_transaction (%llu, %p, %u) != " "transaction (%p, %u)", journal->j_devname,
Quoted 6 lines · Eric Sandeen
I was looking at some debugging logs from a test on ext4, and wondered why I saw messages from JBD: not JBD2:
This is why! Probably worth changing for consistency.
Signed-off-by Eric Sandeen <[email protected]>
What kernel version is this against? This has been fixed since 3.13:
commit a67c848a8b9aa9e471f9eaadd2cb29cc527462cf
Author: Dmitry Monakhov <[email protected]> Date: Sun Dec 8 21:14:59 2013 -0500
jbd2: rename obsoleted msg JBD->JBD2
Rename performed via: perl -pi -e 's/JBD:/JBD2:/g' fs/jbd2/*.c
- Ted
Quoted 1 line · Theodore Ts'o
What kernel version is this against? This has been fixed since 3.13:
Oh, I'm sorry. It was against "upstream" but on a box where I had inexplicably not done a git pull for a long while, an just assumed I was up to date. :( Sorry for the noise.
-Eric
I really thought we had already fixed it.
The patch looks good too, consider it
Cheers o/
Quoted 104 lines · Eric Sandeen
I was looking at some debugging logs from a test on ext4, and wondered why I saw messages from JBD: not JBD2:
This is why! Probably worth changing for consistency.
Signed-off-by Eric Sandeen <[email protected]>---
fs/jbd2/journal.c +5
-5@@ -1527,13 +1527,13 @@ static int journal_get_superblock(journal_t *journal)if (JBD2_HAS_COMPAT_FEATURE (journal,JBD2_FEATURE_COMPAT_CHECKSUM ) &&JBD2_HAS_INCOMPAT_FEATURE (journal,JBD2_FEATURE_INCOMPAT_CSUM_V2 )) {/* Can't have checksum v1 and v2 on at the same time! */ -printk (KERN_ERR "JBD: Can't enable checksumming v1 and v2 " +printk (KERN_ERR "JBD2: Can't enable checksumming v1 and v2 " "at the same time!\n" ); goto out; }if (!jbd2_verify_csum_type (journal, sb)) { -printk (KERN_ERR "JBD: Unknown checksum type\n" ); +printk (KERN_ERR "JBD2: Unknown checksum type\n" ); goto out; }@@ -1541,7 +1541,7 @@ static int journal_get_superblock(journal_t *journal)if (JBD2_HAS_INCOMPAT_FEATURE (journal,JBD2_FEATURE_INCOMPAT_CSUM_V2 )) { journal->j_chksum_driver =crypto_alloc_shash ("crc32c" ,0 ,0 );if (IS_ERR (journal->j_chksum_driver)) { -printk (KERN_ERR "JBD: Cannot load crc32c driver.\n" ); +printk (KERN_ERR "JBD2: Cannot load crc32c driver.\n" ); err =PTR_ERR (journal->j_chksum_driver); journal->j_chksum_driver =NULL ; goto out;@@ -1550,7 +1550,7 @@ static int journal_get_superblock(journal_t *journal)/* Check superblock checksum */ if (!jbd2_superblock_csum_verify (journal, sb)) { -printk (KERN_ERR "JBD: journal checksum error\n" ); +printk (KERN_ERR "JBD2: journal checksum error\n" ); goto out; }@@ -1836,7 +1836,7 @@ int jbd2_journal_set_features (journal_t *journal, unsigned long compat, journal->j_chksum_driver =crypto_alloc_shash ("crc32c" ,0 ,0 );if (IS_ERR (journal->j_chksum_driver)) { -printk (KERN_ERR "JBD: Cannot load crc32c " +printk (KERN_ERR "JBD2: Cannot load crc32c " "driver.\n" ); journal->j_chksum_driver =NULL ;return 0 ;fs/jbd2/recovery.c +1
-1@@ -594,7 +594,7 @@ static int do_one_pass(journal_t *journal, be32_to_cpu(tmp->h_sequence))) {brelse (obh); success = -EIO ; -printk (KERN_ERR "JBD: Invalid " +printk (KERN_ERR "JBD2: Invalid " "checksum recovering " "block %llu in log\n" , blocknr);fs/jbd2/transaction.c +3
-4@@ -1305,7 +1305,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh)JBUFFER_TRACE (jh,"fastpath" );if (unlikely (jh->b_transaction != journal->j_running_transaction)) { - printk(KERN_EMERG "JBD: %s: " + printk(KERN_EMERG "JBD2: %s: " "jh->b_transaction (%llu, %p, %u) != " "journal->j_running_transaction (%p, %u)", journal->j_devname,@@ -1332,7 +1332,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh)JBUFFER_TRACE (jh,"already on other transaction" );if (unlikely (jh->b_transaction != journal->j_committing_transaction)) { - printk(KERN_EMERG "JBD: %s: " + printk(KERN_EMERG "JBD2: %s: " "jh->b_transaction (%llu, %p, %u) != " "journal->j_committing_transaction (%p, %u)", journal->j_devname,@@ -1345,7 +1345,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh) ret = -EINVAL ; }if (unlikely (jh->b_next_transaction != transaction)) { - printk(KERN_EMERG "JBD: %s: " + printk(KERN_EMERG "JBD2: %s: " "jh->b_next_transaction (%llu, %p, %u) != " "transaction (%p, %u)", journal->j_devname, --To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 1 line
Carlos
Theodore Ts'o
maintainerQuoted 5 lines · Carlos Maiolino
I really thought we had already fixed it.
The patch looks good too, consider it
Reviewed-by Carlos Maiolino <[email protected]>
We have fixed this already, and I had noted this already. See commit a67c848a8
- Ted