Wireless Centrino 2230-N issues
My wireless card was working fine for some time, but after reinstallation of computer with Ubuntu, it stopped working and i keep getting this in my dmesg:
lspci:
0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
dmesg:
[ 1465.050832] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.058299] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.104509] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.104522] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.104527] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.104818] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.105296] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.112770] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.156493] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.156500] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.156504] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.156784] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.158031] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.165471] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.212534] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.212542] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.212546] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.212825] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.213119] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.220559] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
Does this mean i have issue with driver/kernel or my wifi card is broken? I tried copying latest uucode for 2230 wireless card (http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-2030-ucode-18.168.6.1.tgz) into /lib/firmware and reloading kernel module, no success. Still the same issue.
Best regards,
Alen Krmelj
Quoted 4 lines
My wireless card was working fine for some time, but after reinstallation of computer with Ubuntu, it stopped working and i keep getting this in my dmesg:
Can you please share with us the kernel versions you had used until now, and your current version?
Quoted 47 lines
lspci:
0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGNdmesg:
[ 1465.050832] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.058299] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.104509] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.104522] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.104527] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.104818] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.105296] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.112770] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.156493] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.156500] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.156504] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.156784] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.158031] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.165471] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.212534] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.212542] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.212546] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.212825] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.213119] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.220559] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0Does this mean i have issue with driver/kernel or my wifi card is broken? I tried copying latest uucode for 2230 wireless card
(http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=
get&target=iwlwifi-2030-ucode-18.168.6.1.tgz)
into/lib/firmwareand reloading kernel module, no success. Still the same issue.Best regards,
Alen Krmelj_______________________________________________
ilw mailing list
[email protected]
http://linux.intel.com/mailman/listinfo/ilw
Quoted 7 lines · Emmanuel
Quoted 5 lines
My wireless card was working fine for some time, but after reinstallation of computer with Ubuntu, it stopped working and i keep getting this in my dmesg:
Can you please share with us the kernel versions you had used until now,
and your current version?
Quoted 1 line
Hi,
I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24 installed on a new Toshiba laptop with N2230 wifi card. dmesg:
[ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5 [ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device. [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:
FW Error
Is the card broken?
Best,
Piotr
Quoted 53 lines
Quoted 40 lines
lspci:
0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGNdmesg:
[ 1465.050832] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.058299] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.104509] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.104522] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.104527] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.104818] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.105296] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.112770] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.156493] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.156500] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.156504] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.156784] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.158031] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.165471] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.212534] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.212542] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.212546] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.212825] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.213119] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.220559] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0Does this mean i have issue with driver/kernel or my wifi card is broken? I tried copying latest uucode for 2230 wireless card
(http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=
get&target=iwlwifi-2030-ucode-18.168.6.1.tgz)
into/lib/firmwareand reloading kernel module, no success. Still the same issue.Quoted 7 lines
Best regards,
Alen Krmelj_______________________________________________
ilw mailing list
ilw@...
http://linux.intel.com/mailman/listinfo/ilw--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@...
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 20 lines
Quoted 6 lines
Quoted 4 lines
My wireless card was working fine for some time, but after reinstallation of computer with Ubuntu, it stopped working and i keep getting this in my dmesg:
Can you please share with us the kernel versions you had used until now,
and your current version?
Quoted 1 line
Hi,
I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24 installed on a new Toshiba laptop with N2230 wifi card. dmesg:
[ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5 [ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device. [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:
Quoted 47 lines
FW Error
Is the card broken?
Best,
PiotrQuoted 39 lines
Quoted 39 lines
lspci:
0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGNdmesg:
[ 1465.050832] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.058299] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.104509] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.104522] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.104527] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.104818] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.105296] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.112770] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.156493] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.156500] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.156504] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.156784] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.158031] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.165471] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0 [ 1465.212534] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 1465.212542] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5 [ 1465.212546] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5 [ 1465.212825] iwlwifi 0000:0a:00.0: Unable to initialize device. [ 1465.213119] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S [ 1465.220559] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0Does this mean i have issue with driver/kernel or my wifi card is broken? I tried copying latest uucode for 2230 wireless card
(http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=
get&target=iwlwifi-2030-ucode-18.168.6.1.tgz)
into/lib/firmwareand reloading kernel module, no success. Still the same issue.
Can you try to add bt_coex_active=0 as debug parameter?
Thanks
Quoted 12 lines
Quoted 12 lines
I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24 installed on a new Toshiba laptop with N2230 wifi card. dmesg:
[ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5 [ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device. [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:FW Error
Quoted 9 lines
Quoted 6 lines
Is the card broken?
Best,
PiotrCan you try to add bt_coex_active=0 as debug parameter?
Sorry, I meant *module* parameter. The mode is iwlwifi Thanks
Quoted 6 lines · Emmanuel Grumbach
Quoted 6 lines
Quoted 6 lines
I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24 installed on a new Toshiba laptop with N2230 wifi card. dmesg:
[ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE
transition: -5
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device. [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD
failed:
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
FW Error
Is the card broken?
Best,
Piotr
Quoted 4 lines
Quoted 2 lines
Can you try to add bt_coex_active=0 as debug parameter?
Sorry, I meant *module* parameter. The mode is iwlwifi
Thanks for quick reply.
I've tried your suggestion on the fly:
modprobe -rv iwlwifi
modprobe iwlwifi bt_coex_active=0
After this, I get "N" from "more /sys/module/iwlwifi/parameters/bt_coex_active", but it seems not to take any effect on device functioning nor on the kernel messages.
Is this what you meant? BTW, the bluetooth seems to work.
Best,
Piotr
Quoted 31 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24 installed on a new Toshiba laptop with N2230 wifi card. dmesg:
[ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVEtransition: -5
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device. [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMDfailed:
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
FW Error
Is the card broken?
Best,
PiotrQuoted 4 lines
Quoted 2 lines
Can you try to add bt_coex_active=0 as debug parameter?
Sorry, I meant *module* parameter. The mode is iwlwifi
Thanks for quick reply.
I've tried your suggestion on the fly:
Quoted 8 lines
modprobe -rv iwlwifi
modprobe iwlwifi bt_coex_active=0After this, I get "N" from "more
/sys/module/iwlwifi/parameters/bt_coex_active", but it seems not to take any effect on device functioning nor on the kernel messages.
Is this what you meant? BTW, the bluetooth seems to work.
Can you please send the whole dmesg output?
Quoted 2 lines · Emmanuel Grumbach
Can you please send the whole dmesg output?
[115535.469083] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5 [115535.469370] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [115535.469412] iwlwifi 0000:01:00.0: Unable to initialize device. [115535.471365] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [115535.478424] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [115535.525086] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD
failed: FW Error
This repeats over and over again.
Piotr
Quoted 6 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@...
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 4 lines
Quoted 3 lines
Can you please send the whole dmesg output?
Quoted 8 lines
[115535.469083] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5 [115535.469370] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [115535.469412] iwlwifi 0000:01:00.0: Unable to initialize device. [115535.471365] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [115535.478424] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [115535.525086] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMDfailed: FW Error
Ok, please do the following:
modprobe -r iwldvm
modprobe iwlwifi fw_restart=0 debug=0xffffffff
then, please send the whole dmesg output.
Quoted 7 lines · Emmanuel Grumbach
Ok, please do the following:
modprobe -r iwldvm
modprobe iwlwifi fw_restart=0 debug=0xffffffffthen, please send the whole dmesg output.
Please find below the output of the commands:
piotr@pk:~$ sudo modprobe -rv iwldvm rmmod iwldvm rmmod mac80211 rmmod iwlwifi rmmod cfg80211 piotr@pk:~$ sudo modprobe -v iwlwifi fw_restart=0 debug=0xffffffff insmod /lib/modules/3.13.0-24-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.13.0-24-generic/kernel/drivers /net/wireless/iwlwifi/iwlwifi.ko fw_restart=0 debug=0xffffffff piotr@pk:~$ dmesg [ 976.624087] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5 [ 976.624372] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [ 976.624414] iwlwifi 0000:01:00.0: Unable to initialize device. [ 976.626379] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 976.633440] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [ 976.680112] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 976.680125] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5 [ 976.680412] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [ 976.680453] iwlwifi 0000:01:00.0: Unable to initialize device. [ 976.680957] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 976.688020] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [ 976.732150] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [ 976.732163] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5 [ 976.732449] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5 [ 976.732490] iwlwifi 0000:01:00.0: Unable to initialize device. [ 976.734505] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 976.741567] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0 [ 976.788131] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed: FW Error [... repeats several times ...]
The kernel messages didn't change. Am I doing something wrong?
Piotr