ath10k: support get/set antenna configurations.
Subsystems (2)
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to Janusz DziedzicQuoted 11 lines
Could you get trace log with
debug_mask=0xffffff3f?You can also start hostapd with -ddt -T then we will have all logs in trace :) You can also add traces from mac80211, cfg80211
Here description:
http://wireless.kernel.org/en/users/Drivers/ath10k/debugBTW, seems you have wrong power constraint configuration - best remove this from hostapd.conf file.
I didn't have the option -T in my hostapd, only those:
options:
-h show this usage -d show more debug messages (-dd for even more) -B run daemon in the background -e entropy file -g global control interface path -G group for control interfaces -P PID file -K include key data in debug messages -t include timestamps in some debug messages -v show hostapd version
Is it because I don't have package trace installed in my kernel????
You can found in the attached file debug msg from hostapd (apd_52.txt), wpa_supp (wpa_52.txt), dmesg from AP (dmesg_apd.txt) and dmesg from STA (dmesg_wpa.txt) with the debugmask=0xffffff3f with the airlog of wireshark (airelog_52).
Small question: If I use the firmware version 999, the frame of Probe Request from Station have Mac address source: SecureWo_12:34:56 and with the version 10.1.467-2.1 I get the true address mac, is this normal?
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
1262304601.399042: random: Trying to read entropy from /dev/random
1262304601.399560: Configuration file: /etc/hostapd.conf
1262304601.401296: ctrl_interface_group=0
1262304601.401616: eapol_version=1
1262304601.403406: rfkill: Cannot open RFKILL control device
1262304601.403678: nl80211: RFKILL status not available
1262304601.404430: nl80211: Supported cipher 00-0f-ac:1
1262304601.404680: nl80211: Supported cipher 00-0f-ac:5
1262304601.404817: nl80211: Supported cipher 00-0f-ac:2
1262304601.405039: nl80211: Supported cipher 00-0f-ac:4
1262304601.405199: nl80211: Supported cipher 00-0f-ac:6
1262304601.405601: nl80211: Using driver-based off-channel TX
1262304601.405848: nl80211: interface wlan0 in phy phy0
1262304601.406155: nl80211: Set mode ifindex 12 iftype 3 (AP)
1262304601.406498: nl80211: Failed to set interface 12 to mode 3: -16 (Device or resource busy)
1262304601.406803: nl80211: Try mode change after setting interface down
1262304602.015977: nl80211: Set mode ifindex 12 iftype 3 (AP)
1262304603.351275: nl80211: Mode change succeeded while interface is down
1262304603.352135: nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=1
1262304603.352390: nl80211: Create interface iftype 6 (MONITOR)
1262304603.357789: nl80211: New interface mon.wlan0 created: ifindex=14
1262304603.358099: nl80211: Add own interface ifindex 14
1262304603.358263: nl80211: if_indices[16]: 14
1262304603.359157: nl80211: Interface wlan0 is in bridge br0
1262304603.359492: nl80211: Add own interface ifindex 13
1262304603.359740: nl80211: if_indices[16]: 14 13
1262304603.359914: nl80211: Add own interface ifindex 12
1262304603.360091: nl80211: if_indices[16]: 14 13 12
1262304603.360420: phy: phy0
1262304603.361983: BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
1262304603.362272: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
1262304603.362684: Previous country code FR, new country code FR
1262304603.363693: nl80211: Regulatory information - country=FR (DFS-ETSI)
1262304603.364981: nl80211: 2402-2482 @ 40 MHz 20 mBm
1262304603.365256: nl80211: 5170-5250 @ 80 MHz 20 mBm
1262304603.365404: nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS)
1262304603.365544: nl80211: 5490-5710 @ 80 MHz 27 mBm (DFS)
1262304603.365686: nl80211: 57240-65880 @ 2160 MHz 40 mBm (no outdoor)
1262304603.365910: nl80211: Added 802.11b mode based on 802.11g information
1262304603.366063: Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
1262304603.366288: Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
1262304603.369491: Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
1262304603.369792: Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
1262304603.369935: Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
1262304603.370182: Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
1262304603.370384: Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
1262304603.370561: Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
1262304603.370703: Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
1262304603.370901: Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
1262304603.371074: Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
1262304603.371247: Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
1262304603.371421: Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
1262304603.371593: Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=20 dBm
1262304603.371764: Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=20 dBm
1262304603.371988: Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=20 dBm
1262304603.372128: Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=20 dBm
1262304603.372339: Allowed channel: mode=2 chan=52 freq=5260 MHz max_tx_power=20 dBm (DFS state = usable)
1262304603.372521: Allowed channel: mode=2 chan=56 freq=5280 MHz max_tx_power=20 dBm (DFS state = usable)
1262304603.372699: Allowed channel: mode=2 chan=60 freq=5300 MHz max_tx_power=20 dBm (DFS state = usable)
1262304603.372884: Allowed channel: mode=2 chan=64 freq=5320 MHz max_tx_power=20 dBm (DFS state = usable)
1262304603.373068: Allowed channel: mode=2 chan=100 freq=5500 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373252: Allowed channel: mode=2 chan=104 freq=5520 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373293: Allowed channel: mode=2 chan=108 freq=5540 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373321: Allowed channel: mode=2 chan=112 freq=5560 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373346: Allowed channel: mode=2 chan=116 freq=5580 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373372: Allowed channel: mode=2 chan=120 freq=5600 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373598: Allowed channel: mode=2 chan=124 freq=5620 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373638: Allowed channel: mode=2 chan=128 freq=5640 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373665: Allowed channel: mode=2 chan=132 freq=5660 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373690: Allowed channel: mode=2 chan=136 freq=5680 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373715: Allowed channel: mode=2 chan=140 freq=5700 MHz max_tx_power=27 dBm (DFS state = usable)
1262304603.373739: Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
1262304603.373761: Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
1262304603.373784: Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
1262304603.373806: Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
1262304603.374063: Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
1262304603.374105: Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
1262304603.374131: Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
1262304603.374154: Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
1262304603.374176: Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
1262304603.374197: Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
1262304603.374218: Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
1262304603.374240: Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
1262304603.374262: Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
1262304603.374307: hw vht capab: 0x338001b2, conf vht capab: 0x0
1262304603.374558: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
1262304603.374597: Scan for neighboring BSSes prior to enabling 40 MHz channel
1262304603.374631: 40 MHz affected channel range: [5250,5290] MHz
1262304603.374704: wlan0: nl80211: scan request
1262304603.374765: nl80211: Scan frequency 5260 MHz
1262304603.375000: nl80211: Scan frequency 5280 MHz
1262304603.375696: Scan requested (ret=0) - scan timeout 10 seconds
1262304603.375979: Interface initialization will be completed in a callback
1262304603.376196: ctrl_iface not configured!
1262304603.376397: random: Got 20/20 bytes from /dev/random
1262304603.378963: RTM_NEWLINK: ifi_index=12 ifname=wlan0 operstate=2 linkmode=0 master=13 ifi_flags=0x1002 ()
1262304603.379356: nl80211: Ignore interface down event since interface wlan0 is up
1262304603.379428: RTM_NEWLINK: ifi_index=12 ifname=wlan0 master=13 operstate=2 ifi_flags=0x1002 ()
1262304603.379713: nl80211: Ignore interface down event since interface wlan0 is up
1262304603.379781: RTM_NEWLINK: ifi_index=12 ifname=wlan0 master=13 operstate=2 ifi_flags=0x1002 ()
1262304603.379830: nl80211: Ignore interface down event since interface wlan0 is up
1262304603.380072: RTM_NEWLINK: ifi_index=12 ifname=wlan0 operstate=2 linkmode=0 master=13 ifi_flags=0x1003 ([UP])
1262304603.380155: RTM_NEWLINK: ifi_index=12 ifname=wlan0 master=13 operstate=2 ifi_flags=0x1003 ([UP])
1262304603.380218: nl80211: Add ifindex 13 for bridge br0
1262304603.380291: nl80211: Add own interface ifindex 13
1262304603.380466: nl80211: ifindex 13 already in the list
1262304603.380519: RTM_NEWLINK: ifi_index=14 ifname=mon.wlan0 operstate=2 linkmode=0 ifi_flags=0x1002 ()
1262304603.380581: nl80211: Ignore interface down event since interface mon.wlan0 is up
1262304603.380631: RTM_NEWLINK: ifi_index=14 ifname=mon.wlan0 operstate=0 linkmode=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
1262304603.380845: wlan0: Event INTERFACE_STATUS (5) received
1262304603.380882: Unknown event 5
1262304603.380923: nl80211: Event message available
1262304603.381003: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
1262304603.381187: wlan0: nl80211: Scan trigger
1262304603.381231: wlan0: Event SCAN_STARTED (49) received
1262304603.381255: Unknown event 49
1262304603.970906: nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304603.970960: nl80211: send_mlme -> send_frame
1262304603.970972: nl80211: send_frame - Use bss->freq=0
1262304603.970983: nl80211: send_frame(freq=0 bss->freq=0) -> send_mntr
1262304603.971539: wlan0: Event TX_STATUS (18) received
1262304603.991176: nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304603.991225: nl80211: send_mlme -> send_frame
1262304603.991238: nl80211: send_frame - Use bss->freq=0
1262304603.991250: nl80211: send_frame(freq=0 bss->freq=0) -> send_mntr
1262304603.991736: wlan0: Event TX_STATUS (18) received
1262304604.013986: nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304604.014033: nl80211: send_mlme -> send_frame
1262304604.014046: nl80211: send_frame - Use bss->freq=0
1262304604.014058: nl80211: send_frame(freq=0 bss->freq=0) -> send_mntr
1262304604.014528: wlan0: Event TX_STATUS (18) received
1262304604.034421: nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304604.034471: nl80211: send_mlme -> send_frame
1262304604.034485: nl80211: send_frame - Use bss->freq=0
1262304604.034497: nl80211: send_frame(freq=0 bss->freq=0) -> send_mntr
1262304604.035003: wlan0: Event TX_STATUS (18) received
1262304604.077641: nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304604.077694: nl80211: send_mlme -> send_frame
1262304604.077708: nl80211: send_frame - Use bss->freq=0
1262304604.077720: nl80211: send_frame(freq=0 bss->freq=0) -> send_mntr
1262304604.078250: wlan0: Event TX_STATUS (18) received
1262304604.100319: nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304604.100361: nl80211: send_mlme -> send_frame
1262304604.100375: nl80211: send_frame - Use bss->freq=0
1262304604.100386: nl80211: send_frame(freq=0 bss->freq=0) -> send_mntr
1262304604.100845: wlan0: Event TX_STATUS (18) received
1262304604.165092: nl80211: send_mlme - noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304604.165134: nl80211: send_mlme -> send_frame
1262304604.165147: nl80211: send_frame - Use bss->freq=0
1262304604.165159: nl80211: send_frame(freq=0 bss->freq=0) -> send_mntr
1262304604.165624: wlan0: Event TX_STATUS (18) received
1262304604.741479: nl80211: Event message available
1262304604.741572: nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
1262304604.741602: wlan0: nl80211: New scan results available
1262304604.741639: nl80211: Scan included frequencies: 5260 5280
1262304604.741665: wlan0: Event SCAN_RESULTS (3) received
1262304604.741783: nl80211: Received scan results (0 BSSes)
1262304604.742058: HT40: control channel: 52 secondary channel: 56
1262304604.742082: Completing interface initialization
1262304604.742095: Mode: IEEE 802.11a Channel: 52 Frequency: 5260 MHz
1262304604.742120: DFS 2 channels required radar detection
1262304604.742139: DFS all channels available, (SKIP CAC): no
1262304604.742151: DFS 0 chans unavailable - choose other channel: no
1262304604.742165: wlan0: interface state HT_SCAN->DFS
1262304604.742176: DFS start CAC on 5260 MHz
1262304604.742211: wlan0: DFS-CAC-START freq=5260 chan=52 sec_chan=1, width=0, seg0=0, seg1=0, cac_time=60s
1262304604.742238: nl80211: Start radar detection (CAC) 5260 MHz (ht_enabled=1, vht_enabled=0, bandwidth=40 MHz, cf1=5270 MHz, cf2=0 MHz)
1262304664.786599: nl80211: Event message available
1262304664.786701: nl80211: Drv Event 94 (NL80211_CMD_RADAR_DETECT) received for wlan0
1262304664.786737: nl80211: DFS event on freq 5260 MHz, ht: 1, offset: 1, width: 2, cf1: 5270MHz, cf2: 0MHz
1262304664.786774: wlan0: Event DFS_CAC_FINISHED (45) received
1262304664.786787: DFS CAC finished on 5260 MHz
1262304664.786811: wlan0: DFS-CAC-COMPLETED success=1 freq=5260 ht_enabled=1 chan_offset=1 chan_width=2 cf1=5270 cf2=0
1262304664.786825: DFS freq: 5260MHz, n_chans: 2
1262304664.786837: set_dfs_state 0x300 for 5260 MHz
1262304664.786849: set_dfs_state 0x300 for 5280 MHz
1262304664.786861: Completing interface initialization
1262304664.786873: Mode: IEEE 802.11a Channel: 52 Frequency: 5260 MHz
1262304664.786888: DFS 2 channels required radar detection
1262304664.786899: DFS all channels available, (SKIP CAC): yes
1262304664.786919: nl80211: Set freq 5260 (ht_enabled=1, vht_enabled=0, bandwidth=40 MHz, cf1=5270 MHz, cf2=0 MHz)
1262304664.787038: RATE[0] rate=60 flags=0x1
1262304664.787056: RATE[1] rate=90 flags=0x0
1262304664.787069: RATE[2] rate=120 flags=0x1
1262304664.787079: RATE[3] rate=180 flags=0x0
1262304664.787091: RATE[4] rate=240 flags=0x1
1262304664.787101: RATE[5] rate=360 flags=0x0
1262304664.787112: RATE[6] rate=480 flags=0x0
1262304664.787122: RATE[7] rate=540 flags=0x0
1262304664.787286: hostapd_setup_bss(hapd=0x135d20 (wlan0), first=1)
1262304664.787322: wlan0: Flushing old station entries
1262304664.787341: nl80211: flush -> DEL_STATION wlan0 (all)
1262304664.787459: wlan0: Deauthenticate all stations
1262304664.787481: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 nlmode=3
1262304664.787499: nl80211: send_mlme -> send_frame
1262304664.787510: nl80211: send_frame - Use bss->freq=5260
1262304664.787521: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304664.787595: wpa_driver_nl80211_set_key: ifindex=12 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
1262304664.787702: wpa_driver_nl80211_set_key: ifindex=12 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
1262304664.787781: wpa_driver_nl80211_set_key: ifindex=12 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
1262304664.787855: wpa_driver_nl80211_set_key: ifindex=12 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
1262304664.787927: Using interface wlan0 with hwaddr 04:f0:21:0e:38:be and ssid "ath10k"
1262304664.787953: Deriving WPA PSK based on passphrase
1262304664.787979: SSID - hexdump_ascii(len=6):
61 74 68 31 30 6b ath10k
1262304664.788038: PSK (ASCII passphrase) - hexdump_ascii(len=13): [REMOVED]
1262304665.017463: PSK (from passphrase) - hexdump(len=32): [REMOVED]
1262304665.018036: nl80211: Set beacon (beacon_set=0)
1262304665.018254: nl80211: Beacon head - hexdump(len=57): 80 00 00 00 ff ff ff ff ff ff 04 f0 21 0e 38 be 04 f0 21 0e 38 be 00 00 00 00 00 00 00 00 00 00 64 00 01 01 00 06 61 74 68 31 30 6b 01 08 8c 12 98 24 b0 48 60 6c 03 01 34
1262304665.018518: nl80211: Beacon tail - hexdump(len=103): 07 0a 46 52 20 24 08 14 64 0b 1b 00 20 01 03 2d 1a e2 19 1b ff ff ff 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 34 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 00 00 00 00 00 40 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 1262304665.018838: nl80211: ifindex=12
1262304665.018972: nl80211: beacon_int=100
1262304665.019145: nl80211: dtim_period=2
1262304665.019315: nl80211: ssid - hexdump_ascii(len=6):
61 74 68 31 30 6b ath10k
1262304665.019665: nl80211: hidden SSID not in use
1262304665.019828: nl80211: privacy=0
1262304665.019991: nl80211: auth_algs=0x1
1262304665.020153: nl80211: wpa_version=0x0
1262304665.020312: nl80211: key_mgmt_suites=0x2
1262304665.020474: nl80211: pairwise_ciphers=0x1
1262304665.020643: nl80211: group_cipher=0x1
1262304665.020821: nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
1262304665.021008: nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
1262304665.021160: nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
1262304666.022539: nl80211: Set wlan0 operstate 0->1 (UP)
1262304666.022591: netlink: Operstate: ifindex=12 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
1262304666.023242: wlan0: interface state DFS->ENABLED
1262304666.023281: wlan0: AP-ENABLED
1262304666.023294: wlan0: Setup of interface done.
1262304666.042893: RTM_NEWLINK: ifi_index=12 ifname=wlan0 master=13 operstate=6 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
1262304666.043000: nl80211: Add ifindex 13 for bridge br0
1262304666.043018: nl80211: Add own interface ifindex 13
1262304666.043031: nl80211: ifindex 13 already in the list
1262304666.043054: RTM_NEWLINK: ifi_index=12 ifname=wlan0 master=13 operstate=6 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
1262304666.043094: nl80211: Add ifindex 13 for bridge br0
1262304666.043109: nl80211: Add own interface ifindex 13
1262304666.043120: nl80211: ifindex 13 already in the list
1262304666.043142: RTM_NEWLINK: ifi_index=12 ifname=wlan0 master=13 operstate=6 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
1262304666.043180: nl80211: Add ifindex 13 for bridge br0
1262304666.043195: nl80211: Add own interface ifindex 13
1262304666.043207: nl80211: ifindex 13 already in the list
1262304666.043231: RTM_NEWLINK: ifi_index=12 ifname=wlan0 operstate=6 linkmode=0 master=13 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
1262304668.028291: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304668.028346: nl80211: send_mlme -> send_frame
1262304668.028359: nl80211: send_frame - Use bss->freq=5260
1262304668.028371: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304668.233345: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304668.233398: nl80211: send_mlme -> send_frame
1262304668.233411: nl80211: send_frame - Use bss->freq=5260
1262304668.233423: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304668.443353: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304668.443407: nl80211: send_mlme -> send_frame
1262304668.443420: nl80211: send_frame - Use bss->freq=5260
1262304668.443432: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304668.932990: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304668.933043: nl80211: send_mlme -> send_frame
1262304668.933057: nl80211: send_frame - Use bss->freq=5260
1262304668.933069: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304669.143406: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304669.143461: nl80211: send_mlme -> send_frame
1262304669.143474: nl80211: send_frame - Use bss->freq=5260
1262304669.143486: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304669.353350: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304669.353404: nl80211: send_mlme -> send_frame
1262304669.353417: nl80211: send_frame - Use bss->freq=5260
1262304669.353429: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304670.238204: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304670.238258: nl80211: send_mlme -> send_frame
1262304670.238271: nl80211: send_frame - Use bss->freq=5260
1262304670.238283: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304670.443327: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304670.443375: nl80211: send_mlme -> send_frame
1262304670.443387: nl80211: send_frame - Use bss->freq=5260
1262304670.443399: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304670.653996: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304670.654041: nl80211: send_mlme -> send_frame
1262304670.654054: nl80211: send_frame - Use bss->freq=5260
1262304670.654065: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304672.038663: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304672.038718: nl80211: send_mlme -> send_frame
1262304672.038731: nl80211: send_frame - Use bss->freq=5260
1262304672.038744: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304672.243386: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304672.243439: nl80211: send_mlme -> send_frame
1262304672.243452: nl80211: send_frame - Use bss->freq=5260
1262304672.243464: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304672.453340: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304672.453388: nl80211: send_mlme -> send_frame
1262304672.453401: nl80211: send_frame - Use bss->freq=5260
1262304672.453413: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304683.008472: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304683.008524: nl80211: send_mlme -> send_frame
1262304683.008537: nl80211: send_frame - Use bss->freq=5260
1262304683.008549: nl80211: send_frame(freq=5260 bss->freq=5260) -> send_mntr
1262304683.213475: nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 nlmode=3
1262304971.459936: wpa_supplicant v2.1
1262304971.460199: random: Trying to read entropy from /dev/random 1262304971.460259: Successfully initialized wpa_supplicant 1262304971.460290: Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf ' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A' 1262304971.460329: Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_su pplicant.conf'
1262304971.460361: Reading configuration file '/etc/wpa_supplicant.conf' 1262304971.460518: ctrl_interface='/var/run/wpa_supplicant' 1262304971.460569: eapol_version=1
1262304971.460593: ap_scan=1
1262304971.460616: fast_reauth=0
1262304971.460643: Line: 5 - start of a new network block 1262304971.460707: ssid - hexdump_ascii(len=6):
61 74 68 31 30 6b ath10k
1262304971.460812: key_mgmt: 0x4
1262304971.460892: Priority group 0
1262304971.460912: id=0 ssid='ath10k'
1262304971.462365: rfkill: Cannot open RFKILL control device 1262304971.462402: nl80211: RFKILL status not available 1262304971.462914: nl80211: Supported cipher 00-0f-ac:1 1262304971.462948: nl80211: Supported cipher 00-0f-ac:5 1262304971.462962: nl80211: Supported cipher 00-0f-ac:2 1262304971.462974: nl80211: Supported cipher 00-0f-ac:4 1262304971.462986: nl80211: Supported cipher 00-0f-ac:6 1262304971.463257: nl80211: Using driver-based off-channel TX 1262304971.463328: nl80211: interface wlan0 in phy phy0 1262304971.463434: nl80211: Set mode ifindex 5 iftype 2 (STATION) 1262304971.463560: nl80211: Subscribe to mgmt frames with non-AP handle 0x108318 1262304971.463618: nl80211: Register frame type=0xd0 nl_handle=0x108318 match=06 1262304971.463690: nl80211: Register frame type=0xd0 nl_handle=0x108318 match=0a 07
1262304971.463742: nl80211: Register frame type=0xd0 nl_handle=0x108318 match=0a 11
1262304971.463826: netlink: Operstate: ifindex=5 linkmode=1 (userspace-control),
operstate=5 (IF_OPER_DORMANT)
1262304971.463898: nl80211: driver param='(null)' 1262304971.463944: Add interface wlan0 to a new radio phy0 1262304971.464781: nl80211: Regulatory information - country=FR (DFS-ETSI) 1262304971.464835: nl80211: 2402-2482 @ 40 MHz 20 mBm 1262304971.464858: nl80211: 5170-5250 @ 80 MHz 20 mBm 1262304971.464875: nl80211: 5250-5330 @ 80 MHz 20 mBm 1262304971.464891: nl80211: 5490-5710 @ 80 MHz 27 mBm 1262304971.464907: nl80211: 57240-65880 @ 2160 MHz 40 mBm 1262304971.464980: nl80211: Added 802.11b mode based on 802.11g information 1262304971.465102: wlan0: Own MAC address: 04:f0:21:0e:38:c6 1262304971.465188: wpa_driver_nl80211_set_key: ifindex=5 (wlan0) alg=0 addr=(nil ) key_idx=0 set_tx=0 seq_len=0 key_len=0
1262304971.465303: wpa_driver_nl80211_set_key: ifindex=5 (wlan0) alg=0 addr=(nil ) key_idx=1 set_tx=0 seq_len=0 key_len=0
1262304971.465382: wpa_driver_nl80211_set_key: ifindex=5 (wlan0) alg=0 addr=(nil ) key_idx=2 set_tx=0 seq_len=0 key_len=0
1262304971.465487: wpa_driver_nl80211_set_key: ifindex=5 (wlan0) alg=0 addr=(nil ) key_idx=3 set_tx=0 seq_len=0 key_len=0
1262304971.465557: wlan0: RSN: flushing PMKID list in the driver 1262304971.465574: nl80211: Flush PMKIDs
1262304971.465681: wlan0: Setting scan request: 0.100000 sec 1262304971.465940: wlan0: WPS: UUID based on MAC address: 8e778342-bd63-5071-9d8 2-58ab20891bb0
1262304971.478844: EAPOL: SUPP_PAE entering state DISCONNECTED 1262304971.478897: EAPOL: Supplicant port status: Unauthorized 1262304971.478918: nl80211: Skip set_supp_port(unauthorized) while not associate d
1262304971.478941: EAPOL: KEY_RX entering state NO_KEY_RECEIVE 1262304971.478959: EAPOL: SUPP_BE entering state INITIALIZE 1262304971.478978: EAP: EAP entering state DISABLED 1262304971.479219: wlan0: Added interface wlan0
1262304971.479253: wlan0: State: DISCONNECTED -> DISCONNECTED 1262304971.479273: nl80211: Set wlan0 operstate 0->0 (DORMANT) 1262304971.479288: netlink: Operstate: ifindex=5 linkmode=-1 (no change), operst ate=5 (IF_OPER_DORMANT)
1262304971.479462: random: Got 11/20 bytes from /dev/random 1262304971.573157: wlan0: State: DISCONNECTED -> SCANNING 1262304971.573208: wlan0: Starting AP scan for wildcard SSID 1262304971.573244: wlan0: Add radio work 'scan'@0x116b80 1262304971.573267: wlan0: First radio work item in the queue - schedule start im mediately
1262304971.573306: wlan0: Starting radio work 'scan'@0x116b80 after 0.000035 sec ond wait
1262304971.573325: wlan0: nl80211: scan request
1262304971.573360: nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] 1262304971.573382: nl80211: Scan frequency 5260 MHz 1262304971.573773: Scan requested (ret=0) - scan timeout 10 seconds 1262304971.573840: nl80211: Event message available 1262304971.573893: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for
wlan0
1262304971.573925: wlan0: nl80211: Scan trigger
1262304971.573957: wlan0: Event SCAN_STARTED (49) received 1262304971.573983: wlan0: Own scan request started a scan in 0.000165 seconds 1262304971.573997: wlan0: CTRL-EVENT-SCAN-STARTED 1262304971.723961: nl80211: Event message available 1262304971.724030: nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received
for wlan0
1262304971.724056: wlan0: nl80211: New scan results available 1262304971.724088: nl80211: Scan probed for SSID '' 1262304971.724111: nl80211: Scan included frequencies: 5260 1262304971.724128: wlan0: Event SCAN_RESULTS (3) received 1262304971.724147: wlan0: Scan completed in 0.150167 seconds 1262304971.724338: nl80211: Received scan results (1 BSSes) 1262304971.724577: wlan0: BSS: Start scan result update 1 1262304971.724629: wlan0: BSS: Add new id 0 BSSID 04:f0:21:0e:38:be SSID 'ath10k '
1262304971.724683: BSS: last_scan_res_used=1/32
1262304971.724717: wlan0: New scan results available (own=1 ext=0) 1262304971.724766: wlan0: Radio work 'scan'@0x116b80 done in 0.151458 seconds 1262304971.724790: wlan0: Selecting BSS from priority group 0 1262304971.724825: wlan0: 0: 04:f0:21:0e:38:be ssid='ath10k' wpa_ie_len=0 rsn_ie _len=0 caps=0x101 level=-15
1262304971.724857: wlan0: allow in non-WPA/WPA2
1262304971.724888: wlan0: selected BSS 04:f0:21:0e:38:be ssid='ath10k'
1262304971.724921: wlan0: Considering connect request: reassociate: 0 selected:
04:f0:21:0e:38:be bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_st
ate: SCANNING ssid=0x107c38 current_ssid=(nil)
1262304971.724944: wlan0: Request association with 04:f0:21:0e:38:be 1262304971.724976: wlan0: Add radio work 'sme-connect'@0x116b80 1262304971.724998: wlan0: First radio work item in the queue - schedule start im mediately
1262304971.725059: wlan0: Starting radio work 'sme-connect'@0x116b80 after 0.000 054 second wait
1262304971.725091: wlan0: Automatic auth_alg selection: 0x1 1262304971.725129: wlan0: WPA: clearing AP WPA IE 1262304971.725151: wlan0: WPA: clearing AP RSN IE 1262304971.725179: wlan0:wlan0: authenticate with 04:f0:21:0e:38:be
WPA: clearing own WPA/RSN IE
1262304971.725222: wlan0: Cancelling scan requestwlan0: direct probe to 04:f0:21 :0e:38:be (try 1/3)
1262304971.725245: wlan0: SME: Trying to authenticate with 04:f0:21:0e:38:be (SS ID='ath10k' freq=5260 MHz)
1262304971.725262: wlan0: State: SCANNING -> AUTHENTICATING 1262304971.725279: EAPOL: External notification - EAP success=0 1262304972.060052: EAPOL: External notification - EAP fail=0 1262304972.060085: EAPOL: External notification - portControl=ForceAuthorized 1262304972.060125: nl80211: Authenticate (ifindex=5)
1262304972.060148: * bssid=04:f0:21:0e:38:be 1262304972.060164: * freq=5260 1262304972.060175: * SSID - hexdump_ascii(len=6):
61 74 68 31 30 6b ath10k
1262304972.060212: * IEs - hexdump(len=0): [NULL]
1262304972.060224: * Auth Type 0
1262304972.078592: nl80211: Authentication request send successfully 1262304972.078666: nl80211: Event message available 1262304972.078705: nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
1262304972.078723: nl80211: New station 04:f0:21:0e:38:be
wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3) 1262304972.483163: EAPOL: disable timer tick
wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3)
wlan0: authentication with 04:f0:21:0e:38:be timed out 1262304972.708769: nl80211: Event message available 1262304972.708886: nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
1262304972.708906: nl80211: Delete station 04:f0:21:0e:38:be 1262304972.708946: nl80211: Event message available 1262304972.708972: nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for
wlan0
1262304972.709010: nl80211: MLME event 37; timeout with 04:f0:21:0e:38:be 1262304972.709044: wlan0: Event AUTH_TIMED_OUT (14) received 1262304972.709062: wlan0: SME: Authentication timed out 1262304972.709085: wlan0: Radio work 'sme-connect'@0x116b80 done in 0.984028 sec onds
1262304972.709103: Added BSSID 04:f0:21:0e:38:be into blacklist 1262304972.709124: wlan0: Blacklist count 1 --> request scan in 100 ms 1262304972.709142: wlan0: Setting scan request: 0.100000 sec 1262304972.709162: wlan0: State: AUTHENTICATING -> DISCONNECTED 1262304972.709176: nl80211: Set wlan0 operstate 0->0 (DORMANT) 1262304972.709191: netlink: Operstate: ifindex=5 linkmode=-1 (no change), operst ate=5 (IF_OPER_DORMANT)
1262304972.709235: EAPOL: External notification - portEnabled=0 1262304972.709258: EAPOL: External notification - portValid=0 1262304972.813169: wlan0: State: DISCONNECTED -> SCANNING 1262304972.813233: wlan0: Starting AP scan for wildcard SSID 1262304972.813264: wlan0: Add radio work 'scan'@0x116b80 1262304972.813283: wlan0: First radio work item in the queue - schedule start im mediately
1262304972.813324: wlan0: Starting radio work 'scan'@0x116b80 after 0.000037 sec ond wait
1262304972.813344: wlan0: nl80211: scan request
1262304972.813375: nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] 1262304972.813392: nl80211: Scan frequency 5260 MHz 1262304972.813754: Scan requested (ret=0) - scan timeout 30 seconds 1262304972.813809: nl80211: Event message available 1262304972.813848: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for
wlan0
1262304972.813869: wlan0: nl80211: Scan trigger
1262304972.813888: wlan0: Event SCAN_STARTED (49) received 1262304972.813907: wlan0: Own scan request started a scan in 0.000112 seconds 1262304972.813921: wlan0: CTRL-EVENT-SCAN-STARTED 1262304972.96392wlan0: authenticate with 04:f0:21:0e:38:be
2: nl80211: Event message available
1262304972.963994: nl80211: Drv Event 34 (Nwlan0: direct probe to 04:f0:21:0e:38 :be (try 1/3)L80211_CMD_NEW_SCAN_RESULTS) received for wlan0
1262304972.964020: wlan0: nl80211: New scan results available 1262304972.964040: nl80211: Scan probed for SSID '' 1262304972.964055: nl80211: Scan included frequencies: 5260 1262304972.964073: wlan0: Event SCAN_RESULTS (3) received 1262304972.964091: wlan0: Scan completed in 0.150185 seconds 1262304972.964210: nl80211: Received scan results (1 BSSes) 1262304972.964432: wlan0: BSS: Start scan result update 2 1262304972.964469: BSS: last_scan_res_used=1/32
1262304972.964496: wlan0: New scan results available (own=1 ext=0) 1262304972.964534: wlan0: Radio work 'scan'@0x116b80 done in 0.151210 seconds 1262304972.964555: wlan0: Selecting BSS from priority group 0 1262304972.964584: wlan0: 0: 04:f0:21:0e:38:be ssid='ath10k' wpa_ie_len=0 rsn_ie _len=0 caps=0x101 level=-16
1262304972.964605: wlan0: skip - blacklisted (count=1 limit=0)
1262304972.964620: wlan0: No APs found - clear blacklist and try again 1262304972.964633: Removed BSSID 04:f0:21:0e:38:be from blacklist (clear) 1262304972.964652: wlan0: Selecting BSS from priority group 0 1262304972.964675: wlan0: 0: 04:f0:21:0e:38:be ssid='ath10k' wpa_ie_len=0 rsn_ie _len=0 caps=0x101 level=-16
1262304972.964700: wlan0: allow in non-WPA/WPA2
1262304972.964731: wlan0: selected BSS 04:f0:21:0e:38:be ssid='ath10k'
1262304972.964765: wlan0: Considering connect request: reassociate: 0 selected:
04:f0:21:0e:38:be bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_st
ate: SCANNING ssid=0x107c38 current_ssid=(nil)
1262304972.964788: wlan0: Request association with 04:f0:21:0e:38:be 1262304972.964806: wlan0: Add radio work 'sme-connect'@0x116b80 1262304972.964823: wlan0: First radio work item in the queue - schedule start im mediately
1262304972.964874: wlan0: Starting radio work 'sme-connect'@0x116b80 after 0.000 046 second wait
1262304972.964896: wlan0: Automatic auth_alg selection: 0x1 1262304972.964918: wlan0: WPA: clearing AP WPA IE 1262304972.964933: wlan0: WPA: clearing AP RSN IE 1262304972.964948: wlan0: WPA: clearing own WPA/RSN IE 1262304972.964969: wlan0: Cancelling scan request 1262304972.964989: wlan0: SME: Trying to authenticate with 04:f0:21:0e:38:be (SS ID='ath10k' freq=5260 MHz)
1262304972.965006: wlan0: State: SCANNING -> AUTHENTICATING 1262304972.96502wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3) 3: EAPOL: External notification - EAP success=0
1262304972.965045: EAPOL: External notification - EAP fail=0 1262304972.965059: EAPOL: External notification - portControl=ForceAuthorized 1262304972.965086: nl80211: Authenticate (ifindex=5)
1262304972.965103: * bssid=04:f0:21:0e:38:be 1262304972.965119: * freq=5260 1262304972.965129: * SSID - hexdump_ascii(len=6):
61 74 68 31 30 6b ath10k
1262304972.965165: * IEs - hexdump(len=0): [NULL]
1262304972.965177: * Auth Type 0
1262304972.980908: nl80211: Authentication request send successfully 1262304972.981009: nl80211: Event message available 1262304972.981047: nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
1262304972.981064: nl80211: New station 04:f0:21:0e:38:be
wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3)
wlan0: authentication with 04:f0:21:0e:38:be timed out 1262304973.608773: nl80211: Event message available 1262304973.608898: nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
1262304973.608917: nl80211: Delete station 04:f0:21:0e:38:be 1262304973.608959: nl80211: Event message available 1262304973.608986: nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for
wlan0
1262304973.609004: nl80211: MLME event 37; timeout with 04:f0:21:0e:38:be 1262304973.609032: wlan0: Event AUTH_TIMED_OUT (14) received 1262304973.609050: wlan0: SME: Authentication timed out 1262304973.609073: wlan0: Radio work 'sme-connect'@0x116b80 done in 0.644200 sec onds
1262304973.609092: Added BSSID 04:f0:21:0e:38:be into blacklist 1262304973.609113: wlan0: Blacklist count 2 --> request scan in 500 ms 1262304973.609131: wlan0: Setting scan request: 0.500000 sec 1262304973.609151: wlan0: State: AUTHENTICATING -> DISCONNECTED 1262304973.609165: nl80211: Set wlan0 operstate 0->0 (DORMANT) 1262304973.609181: netlink: Operstate: ifindex=5 linkmode=-1 (no change), operst ate=5 (IF_OPER_DORMANT)
1262304973.609226: EAPOL: External notification - portEnabled=0 1262304973.609252: EAPOL: External notification - portValid=0 1262304974.113195: wlan0: State: DISCONNECTED -> SCANNING 1262304974.113267: wlan0: Starting AP scan for wildcard SSID 1262304974.113299: wlan0: Add radio work 'scan'@0x116b80 1262304974.113317: wlan0: First radio work item in the queue - schedule start im mediately
1262304974.113361: wlan0: Starting radio work 'scan'@0x116b80 after 0.000040 sec ond wait
1262304974.113381: wlan0: nl80211: scan request
1262304974.113413: nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] 1262304974.113429: nl80211: Scan frequency 5260 MHz 1262304974.113796: Scan requested (ret=0) - scan timeout 30 seconds 1262304974.113852: nl80211: Event message available 1262304974.113890: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for
wlan0
1262304974.113913: wlan0: nl80211: Scan trigger
1262304974.113932: wlan0: Event SCAN_STARTED (49) received 1262304974.113952: wlan0: Own scan request started a scan in 0.000114 seconds 1262304974.113967: wlan0: CTRL-EVENT-SCAN-STARTED 1262304974.264009: nl80211: Evenwlan0: authenticate with 04:f0:21:0e:38:be t message available
1262304974.264113: nl80211: Drv Event 34 (Nwlan0: direct probe to 04:f0:21:0e:38 :be (try 1/3)L80211_CMD_NEW_SCAN_RESULTS) received for wlan0
1262304974.264142: wlan0: nl80211: New scan results available 1262304974.264162: nl80211: Scan probed for SSID '' 1262304974.264179: nl80211: Scan included frequencies: 5260 1262304974.264197: wlan0: Event SCAN_RESULTS (3) received 1262304974.264216: wlan0: Scan completed in 0.150265 seconds 1262304974.264347: nl80211: Received scan results (1 BSSes) 1262304974.264572: wlan0: BSS: Start scan result update 3 1262304974.264622: BSS: last_scan_res_used=1/32
1262304974.264650: wlan0: New scan results available (own=1 ext=0) 1262304974.264685: wlan0: Radio work 'scan'@0x116b80 done in 0.151324 seconds 1262304974.264705: wlan0: Selecting BSS from priority group 0 1262304974.264733: wlan0: 0: 04:f0:21:0e:38:be ssid='ath10k' wpa_ie_len=0 rsn_ie _len=0 caps=0x101 level=-16
1262304974.264755: wlan0: skip - blacklisted (count=1 limit=0)
1262304974.264770: wlan0: No APs found - clear blacklist and try again 1262304974.264782: Removed BSSID 04:f0:21:0e:38:be from blacklist (clear) 1262304974.264801: wlan0: Selecting BSS from priority group 0 1262304974.264824: wlan0: 0: 04:f0:21:0e:38:be ssid='ath10k' wpa_ie_len=0 rsn_ie _len=0 caps=0x101 level=-16
1262304974.264848: wlan0: allow in non-WPA/WPA2
1262304974.264879: wlan0: selected BSS 04:f0:21:0e:38:be ssid='ath10k'
1262304974.264913: wlan0: Considering connect request: reassociate: 0 selected:
04:f0:21:0e:38:be bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_st
ate: SCANNING ssid=0x107c38 current_ssid=(nil)
1262304974.264935: wlan0: Request association with 04:f0:21:0e:38:be 1262304974.264954: wlan0: Add radio work 'sme-connect'@0x116b80 1262304974.264970: wlan0: First radio work item in the queue - schedule start im mediately
1262304974.265024: wlan0: Starting radio work 'sme-connect'@0x116b80 after 0.000 050 second wait
1262304974.265047: wlan0: Automatic auth_alg selection: 0x1 1262304974.265068: wlan0: WPA: clearing AP WPA IE 1262304974.265084: wlan0: WPA: clearing AP RSN IE 1262304974.265098: wlan0: WPA: clearing own WPA/RSN IE 1262304974.265119: wlan0: Cancelling scan request 1262304974.265138: wlan0: SME: Trying to authenticate with 04:f0:21:0e:38:be (SS ID='ath10k' freq=5260 MHz)
1262304974.265155: wlan0: State: SCANNING -> AUTHENTICATING 1262304974.26517wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3) 2: EAPOL: External notification - EAP success=0
1262304974.265195: EAPOL: External notification - EAP fail=0 1262304974.265209: EAPOL: External notification - portControl=ForceAuthorized 1262304974.265236: nl80211: Authenticate (ifindex=5)
1262304974.265254: * bssid=04:f0:21:0e:38:be 1262304974.265269: * freq=5260 1262304974.265279: * SSID - hexdump_ascii(len=6):
61 74 68 31 30 6b ath10k
1262304974.265315: * IEs - hexdump(len=0): [NULL]
1262304974.265327: * Auth Type 0
1262304974.281002: nl80211: Authentication request send successfully 1262304974.281102: nl80211: Event message available 1262304974.281139: nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
1262304974.281157: nl80211: New station 04:f0:21:0e:38:be
wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3)
wlan0: authentication with 04:f0:21:0e:38:be timed out 1262304974.908777: nl80211: Event message available 1262304974.908895: nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
1262304974.908915: nl80211: Delete station 04:f0:21:0e:38:be 1262304974.908955: nl80211: Event message available 1262304974.908981: nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for
wlan0
1262304974.908998: nl80211: MLME event 37; timeout with 04:f0:21:0e:38:be 1262304974.909026: wlan0: Event AUTH_TIMED_OUT (14) received 1262304974.909044: wlan0: SME: Authentication timed out 1262304974.909066: wlan0: Radio work 'sme-connect'@0x116b80 done in 0.644042 sec onds
1262304974.909085: Added BSSID 04:f0:21:0e:38:be into blacklist 1262304974.909107: wlan0: Blacklist count 3 --> request scan in 1000 ms 1262304974.909125: wlan0: Setting scan request: 1.000000 sec 1262304974.909145: wlan0: State: AUTHENTICATING -> DISCONNECTED 1262304974.909159: nl80211: Set wlan0 operstate 0->0 (DORMANT) 1262304974.909173: netlink: Operstate: ifindex=5 linkmode=-1 (no change), operst ate=5 (IF_OPER_DORMANT)
1262304974.909218: EAPOL: External notification - portEnabled=0 1262304974.909243: EAPOL: External notification - portValid=0 1262304975.923178: wlan0: State: DISCONNECTED -> SCANNING 1262304975.923249: wlan0: Starting AP scan for wildcard SSID 1262304975.923280: wlan0: Add radio work 'scan'@0x116b80 1262304975.923299: wlan0: First radio work item in the queue - schedule start im mediately
1262304975.923342: wlan0: Starting radio work 'scan'@0x116b80 after 0.000039 sec ond wait
1262304975.923362: wlan0: nl80211: scan request
1262304975.923393: nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] 1262304975.923410: nl80211: Scan frequency 5260 MHz 1262304975.923778: Scan requested (ret=0) - scan timeout 30 seconds 1262304975.923832: nl80211: Event message available 1262304975.923870: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for
wlan0
1262304975.923893: wlan0: nl80211: Scan trigger
1262304975.923912: wlan0: Event SCAN_STARTED (49) received 1262304975.923932: wlan0: Own scan request started a scan in 0.000114 seconds 1262304975.923946: wlan0: CTRL-EVENT-SCAN-STARTED 1262304976.07396wlan0: authenticate with 04:f0:21:0e:38:be
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d28883a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d28882e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2888220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2888160
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d28880a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36f00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36e40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36d80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36cc0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36c00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36b40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36a80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c369c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36840
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36780
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2ac2840
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2ac2840 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -33, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c366c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: wmi mgmt tx skb c10ee6e0 len 176 ftype 00 stype 50
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4660 len 188 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee6e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36540
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb c10ee620 len 10 rate_idx 4 vht_nss 0 freq 2412 band 0 flag 0x200 000 fcs-err 0mic-err 0
ath10k: htc rx completion ep 2 skb d2ac2780
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2ac2780 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -32, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36480
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: wmi mgmt tx skb c10ee560 len 176 ftype 00 stype 50
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fffc60 len 188 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee560
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36300
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb c10ee4a0 len 10 rate_idx 4 vht_nss 0 freq 2412 band 0 flag 0x200 000 fcs-err 0mic-err 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c36240
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2ac26c0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2ac26c0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -34, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: wmi mgmt tx skb c10ee3e0 len 176 ftype 00 stype 50
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 188 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee3e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c360c0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2ac2600
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2ac2600 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -34, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: wmi mgmt tx skb c10ee320 len 176 ftype 00 stype 50
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 188 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee320
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2ce60
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2ac2540
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2ac2540 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -38, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: wmi mgmt tx skb c10ee260 len 176 ftype 00 stype 50
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 188 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee260
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2cce0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2ac2480
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2ac2480 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -38, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: wmi mgmt tx skb c10ee1a0 len 176 ftype 00 stype 50
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 188 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee1a0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2cb60
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htc rx completion ep 2 skb d2ac23c0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2ac23c0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -56, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2caa0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: wmi mgmt tx skb d2e39ec0 len 176 ftype 00 stype 50
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04c60 len 188 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39ec0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2c920
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2c860
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2c7a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htc rx completion ep 2 skb d2ac2300
ath10k: wmi event debug mesg len 12
ath10k: htc rx completion ep 2 skb d2ac2240
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 8 reason 3 freq 5260 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_FOREIGN_CHANNEL
ath10k: htc rx completion ep 2 skb d2ac2180
ath10k: chan info err_code 0 freq 5260 cmd_flags 0 noise_floor 0 rx_clear_count 3892975 cycle_count 88667487
ath10k: htc rx completion ep 2 skb d2ac20c0
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 4 reason 3 freq 5260 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_BSS_CHANNEL
ath10k: htc rx completion ep 2 skb d2c52f20
ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -100 rx_clear_cou nt 3892975 cycle_count 101225230
ath10k: htc rx completion ep 2 skb d2c52e60
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 8 reason 3 freq 5280 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_FOREIGN_CHANNEL
ath10k: htc rx completion ep 2 skb d2c52da0
ath10k: chan info err_code 0 freq 5280 cmd_flags 0 noise_floor 0 rx_clear_count 3893190 cycle_count 105986491
ath10k: htc rx completion ep 2 skb d2c52ce0
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 4 reason 3 freq 5280 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_BSS_CHANNEL
ath10k: htc rx completion ep 2 skb d2c52c20
ath10k: chan info err_code 0 freq 5280 cmd_flags 1 noise_floor -100 rx_clear_cou nt 3893190 cycle_count 118836406
ath10k: htc rx completion ep 2 skb d2c52b60
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 2 reason 0 freq 5280 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_COMPLETED
ath10k: SCAN_REASON_COMPLETED
ath10k: mac config channel 5260MHz flags 0x10a radar 1
ath10k: mac monitor refs: promisc 1 monitor 0 cac 1
ath10k: mac monitor already started
ath10k: mac cac start monitor vdev 1
ath10k: mac config channel to 5260MHz (cf1 5270MHz cf2 0MHz width 40)
ath10k: wmi mgmt vdev down id 0x1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04e60 len 16 n_items 1
ath10k: wmi vdev stop id 0x1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ac2300
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e15260 len 16 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2cf20
ath10k: htc rx completion ep 2 skb d2c52aa0
ath10k: WMI_VDEV_STOPPED_EVENTID
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: mac monitor vdev 1 stopped
ath10k: mac monitor refs: promisc 1 monitor 0 cac 1
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 5260, mode 6, ch_flags: 0x406, max_power: 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e15260 len 140 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2c620
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c529e0
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e15260 len 28 n_items 1
ath10k: mac monitor vdev 1 started
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c529e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: mac config power 17
ath10k: wmi pdev set param 3 value 34
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e15260 len 20 n_items 1
ath10k: wmi pdev set param 4 value 34
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2c4a0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04e60 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2c6e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c52920
ath10k: event mgmt rx status 00000000
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2c260
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
eth0: no IPv6 routers present
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2c1a0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2c52860
ath10k: event mgmt rx status 00000000
ath10k: htt rx mgmt ctrl
br0: no IPv6 routers present
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f2c0e0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2c527a0
ath10k: event mgmt rx status 00000000
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2ec0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2c526e0
ath10k: event mgmt rx status 00000000
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2c52620
ath10k: event mgmt rx status 00000000
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2e00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2b6b500
ath10k: event mgmt rx status 00000000
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2d40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2c524a0
ath10k: event mgmt rx status 00000000
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2c80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2ac2cc0
ath10k: event mgmt rx status 00000000
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2bc0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2cb5bc0
ath10k: event mgmt rx status 00000000
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2b00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2a40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2980
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd28c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2800
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2c52260
ath10k: event mgmt rx status 00000000
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2740
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2ac2a80
ath10k: event mgmt rx status 00000000
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0fd2680
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2ac29c0
ath10k: event mgmt rx status 00000000
ath10k: htt rx mgmt ctrl
ath10k: mac config channel 5260MHz flags 0x10a radar 0
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: mac monitor will be stopped later
ath10k: mac cac finished
ath10k: mac config channel to 5260MHz (cf1 5260MHz cf2 0MHz width 20 (noht))
ath10k: wmi mgmt vdev down id 0x1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4660 len 16 n_items 1
ath10k: wmi vdev stop id 0x1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39200
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff860 len 16 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39740
ath10k: htc rx completion ep 2 skb d28886a0
ath10k: WMI_VDEV_STOPPED_EVENTID
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: mac monitor vdev 1 stopped
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 5260, mode 0, ch_flags: 0x400, max_power: 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff860 len 140 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c0fd2500
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d28389c0
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff860 len 28 n_items 1
ath10k: mac monitor vdev 1 started
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d28389c0
ath10k: mac config power 20
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: wmi pdev set param 3 value 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff860 len 20 n_items 1
ath10k: wmi pdev set param 4 value 40
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c0fd2380
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4660 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c0fd25c0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: mac vdev 0 rts threshold -1
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4660 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c0fd25c0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: mac config channel 5260MHz flags 0x10a radar 1
ath10k: mac monitor refs: promisc 1 monitor 0 cac 1
ath10k: mac monitor already started
ath10k: mac cac start monitor vdev 1
ath10k: mac config channel to 5260MHz (cf1 5270MHz cf2 0MHz width 40)
ath10k: wmi mgmt vdev down id 0x1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 16 n_items 1
ath10k: wmi vdev stop id 0x1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2cda0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12879e60 len 16 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2c320
ath10k: htc rx completion ep 2 skb d2c369c0
ath10k: WMI_VDEV_STOPPED_EVENTID
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: mac monitor vdev 1 stopped
ath10k: mac monitor refs: promisc 1 monitor 0 cac 1
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 5260, mode 6, ch_flags: 0x406, max_power: 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12879e60 len 140 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0ee0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb c10ee4a0
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04260 len 28 n_items 1
ath10k: mac monitor vdev 1 started
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee4a0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: mac config power 17
ath10k: wmi pdev set param 3 value 34
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04260 len 20 n_items 1
ath10k: wmi pdev set param 4 value 34
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0d60
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ac2a80
ath10k: wmi vdev id 0x0 set param 3 value 100
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 24 n_items 1
ath10k: mac vdev 0 beacon_interval 100
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ac2a80
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: vdev 0 set beacon tx mode to staggered
ath10k: wmi pdev set param 7 value 0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 20 n_items 1
ath10k: mac vdev 0 start center_freq 5260 phymode 11na-ht40
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0b20
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: wmi vdev start id 0x0 flags: 0x0, freq 5260, mode 6, ch_flags: 0x406, max_power: 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 140 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0a60
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2838e40
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: mac monitor will be stopped later
ath10k: mac cac finished
ath10k: wmi mgmt vdev up id 0x0 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 28 n_items 1
ath10k: mac vdev 0 up
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2838e40
ath10k: htc rx completion ep 2 skb d2c2dbe0
ath10k: WMI_TBTTOFFSET_UPDATE_EVENTID
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 24 n_items 1
ath10k: mac vdev 0 slot_time 2
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed08e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: wmi vdev id 0x0 set param 7 value 2
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 24 n_items 1
ath10k: mac vdev 0 preamble 1n
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0820
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0760
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 108 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2838e40
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 108 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c0fd2080
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 108 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed05e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 108 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0520
ath10k: htc ep 2 got 1 credits (total 1)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
br0: port 2(wlan0) entering forwarding state
br0: port 2(wlan0) entering forwarding state
ath10k: htc rx completion ep 2 skb d2838c00
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0460
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2e39d40
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0520
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2f2cc20
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2838780
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ac2240
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2838c00
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c363c0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39d40
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ac20c0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2cc20
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ac2180
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ac2240
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c52e60
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c363c0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c52f20
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ac20c0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c52ce0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04e60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed03a0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c52da0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c52e60
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2f2cf20
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04c60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dbac00
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2f2c560
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c52ce0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c36180
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2c36180 len 96 ftype 00 stype 40
ath10k: event mgmt rx freq 5260 band 1 snr -14, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2dba840
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2c52c20
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c52da0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb c10ee0e0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c52f20
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb c10ee620
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2cf20
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2e39a40
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c52c20
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2e39b00
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee0e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2e398c0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c10ee620
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2e39800
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39a40
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c526e0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39b00
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c36a80
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04e60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e398c0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2e39c80
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39800
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2c52260
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04c60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c526e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2e39740
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c36a80
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb c0fd2440
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39c80
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2f2c320
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c52260
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2e39380
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39740
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2f2c3e0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c0fd2440
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2f2c9e0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2c320
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ed0e20
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e39380
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2888760
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2c3e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ed02e0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2c9e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ed0220
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04e60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0e20
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ed0160
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2888760
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ed00a0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12e04c60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed02e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dbaf00
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0220
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dbae40
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed0160
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2ac2180
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ed00a0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dbacc0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dbaf00
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dbad80
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dbae40
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dbab40
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2ac2180
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dbaa80
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dbacc0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dba9c0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x00879060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dbad80
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2f2c560
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4060 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dbab40
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dba900
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dbaa80
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dba780
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x008f4660 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dba9c0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dba6c0
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2f2c560
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dba600
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 1/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fff460 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dba900
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2dba540
ath10k: mgmt swba vdev_map 0x1
ath10k: mgmt event bcn_info 0 tim_len 0 mcast 0 changed 0 num_ps_pending 0 bitma p 0x00000000000000000000000000000000
ath10k: dtim 0/2 mcast 0 pvmlen 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12bdae60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dba780
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot hif power down
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
# dmesg | tail -1000 ath10k: boot ce dest ring id 1 entries 512 base_addr c0fe2000 ath10k: boot ce dest ring id 2 entries 32 base_addr d2f84000 ath10k: boot init ce src ring id 3 entries 32 base_addr d2d47000 ath10k: boot init ce src ring id 4 entries 4096 base_addr d2980000 ath10k: boot init ce src ring id 7 entries 2 base_addr d298f000 ath10k: boot ce dest ring id 7 entries 2 base_addr d298e000 ath10k: boot waiting target to initialise ath10k: boot target indicator 0 ath10k: boot target indicator 0 ath10k: boot target indicator 0 ath10k: boot target indicator 2 ath10k: boot target initialised ath10k: bmi start ath10k: bmi write address 0x400800 length 4 ath10k: bmi read address 0x400810 length 4 ath10k: bmi write address 0x400810 length 4 ath10k: bmi write address 0x400844 length 4 ath10k: bmi write address 0x400904 length 4 ath10k: bmi read address 0x4008ac length 4 ath10k: boot push board extended data addr 0x0 ath10k: bmi read address 0x400854 length 4 ath10k: bmi write address 0x401cc0 length 2116 ath10k: bmi write address 0x400858 length 4 ath10k: boot upload otp to 0x1234 len 5402 ath10k: bmi fast download address 0x1234 buffer 0xe22d7038 length 5402 ath10k: bmi lz stream start address 0x1234 ath10k: bmi lz data buffer 0xe22d7038 length 5400 ath10k: bmi lz data buffer 0xd2be3d3c length 4 ath10k: bmi lz stream start address 0x0 ath10k: bmi execute address 0x1234 param 0x0 ath10k: bmi execute result 0x0 ath10k: boot otp execute result 0 ath10k: bmi fast download address 0x1234 buffer 0xe22d855c length 249093 ath10k: bmi lz stream start address 0x1234 ath10k: bmi lz data buffer 0xe22d855c length 249092 ath10k: bmi lz data buffer 0xd2be3d3c length 4 ath10k: bmi lz stream start address 0x0 ath10k: bmi write address 0x400814 length 4 ath10k: pci hif set callbacks ath10k: pci hif get default pipe ath10k: pci hif map service ath10k: bmi done ath10k: htt tx max num pending tx 1424 ath10k: htt rx ring size 1024 fill_level 1000 ath10k: boot hif start ath10k: Target ready! transmit resources: 2 size:1792 ath10k: pci hif map service ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready ath10k: boot htc ep 0 ul polled 0 dl polled 0 ath10k: boot htc service 'Control' eid 0 TX flow control disabled ath10k: boot htc service HTT Data does not allocate target credits ath10k: ath10k_htc_build_tx_ctrl_skb: skb d2e46840 ath10k: pci tx item 0 paddr 0x12ec806c len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 0 skb d2e46840 ath10k: HTC Service HTT Data connect response: status: 0x0, assigned ep: 0x1 ath10k: pci hif map service ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready ath10k: boot htc ep 1 ul polled 1 dl polled 0 ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled ath10k: ath10k_htc_build_tx_ctrl_skb: skb d2e46780 ath10k: pci tx item 0 paddr 0x12ec846c len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 0 skb d2e46780 ath10k: HTC Service WMI connect response: status: 0x0, assigned ep: 0x2 ath10k: pci hif map service ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready ath10k: boot htc ep 2 ul polled 0 dl polled 0 ath10k: ath10k_htc_build_tx_ctrl_skb: skb d2e466c0 ath10k: HTC is using TX credit flow control ath10k: pci tx item 0 paddr 0x12ec886c len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 0 skb d2e466c0 ath10k: htc rx completion ep 2 skb d2fedec0 ath10k: wmi event service ready sw_ver 0x01000000 sw_ver1 0x0000027c abi_ver 3 p hy_cap 0x00000003 ht_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000fffa s ys_cap_info 0x00000000 mem_reqs 0 num_rf_chains 2 ath10k: firmware 999.999.0.636 booted ath10k: wmi init ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05a60 len 148 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fedec0 ath10k: htc rx completion ep 2 skb d2fede00 ath10k: wmi event ready sw_version 16777216 abi_version 3 mac_addr 00:03:07:12:3 4:56 status 0 skb->len 20 ev-sz 20 ath10k: pci tx item 0 paddr 0x12a05c60 len 12 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d29f36a0 ath10k: htc rx completion ep 1 skb d2e46600 ath10k: htt rx, msg_type: 0x0 ath10k: htt target version 2.1 ath10k: pci tx item 0 paddr 0x12a05c60 len 48 n_items 1 ath10k: wmi pdev set param 34 value 1 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05460 len 20 n_items 1 ath10k: wmi pdev set param 10 value 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f36a0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 20 n_items 1 ath10k: wmi pdev set param 1 value 7 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f3520 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05460 len 20 n_items 1 ath10k: wmi pdev set param 2 value 7 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46540 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 20 n_items 1 ath10k: wmi pdev set param 35 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f3520 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05460 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46480 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1 ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0 ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0 ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0 ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0 ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0 ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0 ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0 ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0 ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x128ab060 len 784 n_items 1 ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e463c0 ath10k: pci tx item 0 paddr 0x12a05460 len 32 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f3520 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac vdev create 0 (add interface) type 2 subtype 0 ath10k: WMI vdev create: id 0 type 2 subtype 0 macaddr 00:03:07:12:34:56 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 32 n_items 1 ath10k: wmi vdev id 0x0 set param 33 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: wmi vdev id 0x0 set param 48 value 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e463c0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 24 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 1 value 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46240 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 24 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 2 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: wmi vdev id 0x0 set param 1 value -1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46180 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 24 n_items 1 ath10k: wmi vdev id 0x0 set param 2 value -1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e460c0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac vdev 0 cts_prot 0 ath10k: wmi vdev id 0x0 set param 44 value 0 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: mac vdev 0 slot_time 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2facf20 ath10k: wmi vdev id 0x0 set param 7 value 1 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: mac vdev 0 preamble 1n ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2facf20 ath10k: htc ep 2 got 2 credits (total 2) ath10k: wmi vdev id 0x0 set param 8 value 1 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2face60 ath10k: wmi pdev set wmm params ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 108 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2face60 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 24 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: wmi pdev set wmm params ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2facda0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 108 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2facce0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 24 n_items 1 ath10k: wmi pdev set wmm params ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 108 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2facc20 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 24 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: wmi pdev set wmm params ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2facb60 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 108 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2facaa0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config power 20 ath10k: wmi pdev set param 3 value 40 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05460 len 20 n_items 1 ath10k: wmi pdev set param 4 value 40 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46300 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 20 n_items 1 ath10k: mac vdev 0 psmode disable ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fac9e0 ath10k: wmi set powersave id 0x0 mode 0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fac9e0 ath10k: htc ep 2 got 2 credits (total 2) ADDRCONF(NETDEV_UP): wlan0: link is not ready ath10k: htc rx completion ep 2 skb d2fedd40 ath10k: wmi event debug mesg len 12 ath10k: wmi start scan ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12e03460 len 208 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdfc00 ath10k: htc rx completion ep 2 skb d2fedc80 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 1 reason 4 freq 0 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_STARTED ath10k: htc rx completion ep 2 skb d2fedbc0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 0 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d2fedb00 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 8 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_FOREIGN_CHANNEL ath10k: htc rx completion ep 2 skb d2feda40 ath10k: chan info err_code 0 freq 5260 cmd_flags 0 noise_floor 0 rx_clear_count 536908 cycle_count 754115 ath10k: htc rx completion ep 2 skb d2fed980 ath10k: event mgmt rx status 00000000 ath10k: event mgmt rx skb d2fed980 len 168 ftype 00 stype 80 ath10k: event mgmt rx freq 5260 band 1 snr -9, rate_idx 0 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2e46600 ath10k: htc rx completion ep 1 skb d2fac7a0 ath10k: htt rx, msg_type: 0x1 ath10k: htt rx mgmt ctrl ath10k: htc rx completion ep 2 skb d2fed8c0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d2fed800 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -97 rx_clear_coun t 558888 cycle_count 13254640 ath10k: htc rx completion ep 2 skb d2fed740 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 2 reason 0 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_COMPLETED ath10k: SCAN_REASON_COMPLETED wlan0: authenticate with 04:f0:21:0e:38:be ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config channel to 5260MHz (cf1 5270MHz cf2 0MHz width 40) ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: mac config power 19 ath10k: wmi pdev set param 3 value 38 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 20 n_items 1 ath10k: wmi pdev set param 4 value 38 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fed980 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2feda40 ath10k: wmi vdev id 0x0 set param 3 value 100 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: mac vdev 0 beacon_interval 100 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2feda40 ath10k: mac vdev 0 create peer 04:f0:21:0e:38:be ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2feda40 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fac620 ath10k: htt rx, msg_type: 0x3 ath10k: htt peer map vdev 0 peer 04:f0:21:0e:38:be id 13 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fac560 ath10k: htt rx, msg_type: 0x3 ath10k: htt peer map vdev 0 peer 04:f0:21:0e:38:be id 125 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac vdev 0 start 04:f0:21:0e:38:be ath10k: mac vdev 0 start center_freq 5260 phymode 11na-ht40 ath10k: wmi vdev start id 0x0 flags: 0x0, freq 5260, mode 6, ch_flags: 0x6, max_ power: 40 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05460 len 140 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fac4a0 ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d2fed680 ath10k: WMI_VDEV_START_RESP_EVENTID wlan0: direct probe to 04:f0:21:0e:38:be (try 1/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12d23660 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d29f30a0 ath10k: htc rx completion ep 1 skb d2fac3e0 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12e03460 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d29f3220 ath10k: htc rx completion ep 1 skb d2fac320 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12a05060 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d29f30a0 ath10k: htc rx completion ep 1 skb d2fac260 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: authentication with 04:f0:21:0e:38:be timed out ath10k: mac vdev 0 peer delete 04:f0:21:0e:38:be (sta gone) ath10k: wmi peer delete vdev_id 0 peer_addr 04:f0:21:0e:38:be ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12e03c60 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fac320 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fac1a0 ath10k: htt rx, msg_type: 0x4 ath10k: htt peer unmap vdev 0 peer 04:f0:21:0e:38:be id 13 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fac0e0 ath10k: htt rx, msg_type: 0x4 ath10k: htt peer unmap vdev 0 peer 04:f0:21:0e:38:be id 125 ath10k: mac vdev 0 stop (disassociated ath10k: wmi vdev stop id 0x0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fac0e0 ath10k: htc ep 2 got 1 credits (total 1) ath10k: htc rx completion ep 2 skb d2fed5c0 ath10k: WMI_VDEV_STOPPED_EVENTID ath10k: mac vdev 0 down ath10k: wmi mgmt vdev down id 0x0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05260 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fed5c0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config channel to 5260MHz (cf1 5260MHz cf2 0MHz width 20 (noht)) ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: mac config power 20 ath10k: wmi pdev set param 3 value 40 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 20 n_items 1 ath10k: wmi pdev set param 4 value 40 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f3220 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12e03c60 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f33a0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc rx completion ep 2 skb d2fed500 ath10k: wmi event debug mesg len 84 ath10k: wmi start scan ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x1295ae60 len 208 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fed500 ath10k: htc rx completion ep 2 skb d2fed440 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 1 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_STARTED ath10k: htc rx completion ep 2 skb d2fed380 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d2fed2c0 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -97 rx_clear_coun t 1240320 cycle_count 69883904 ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d2fed200 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 8 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_FOREIGN_CHANNEL ath10k: htc rx completion ep 2 skb d2fed140 ath10k: chan info err_code 0 freq 5260 cmd_flags 0 noise_floor 0 rx_clear_count 1778356 cycle_count 70601572 ath10k: htc rx completion ep 2 skb d2fed080 ath10k: event mgmt rx status 00000000 ath10k: event mgmt rx skb d2fed080 len 168 ftype 00 stype 80 ath10k: event mgmt rx freq 5260 band 1 snr -20, rate_idx 0 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fadd40 ath10k: htt rx, msg_type: 0x1 ath10k: htt rx mgmt ctrl ath10k: htc rx completion ep 2 skb d29f3ee0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d29f3e20 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -97 rx_clear_coun t 1800358 cycle_count 83106456 ath10k: htc rx completion ep 2 skb d29f3d60 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 2 reason 0 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_COMPLETED ath10k: SCAN_REASON_COMPLETED wlan0: authenticate with 04:f0:21:0e:38:be ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config channel to 5260MHz (cf1 5270MHz cf2 0MHz width 40) ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: mac config power 19 ath10k: wmi pdev set param 3 value 38 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 20 n_items 1 ath10k: wmi pdev set param 4 value 38 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fed080 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12e03c60 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fac6e0 ath10k: wmi vdev id 0x0 set param 3 value 100 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12e03c60 len 24 n_items 1 ath10k: mac vdev 0 beacon_interval 100 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fac6e0 ath10k: mac vdev 0 create peer 04:f0:21:0e:38:be ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12e03c60 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fac6e0 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fadbc0 ath10k: htt rx, msg_type: 0x3 ath10k: htt peer map vdev 0 peer 04:f0:21:0e:38:be id 13 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fadb00 ath10k: htt rx, msg_type: 0x3 ath10k: htt peer map vdev 0 peer 04:f0:21:0e:38:be id 125 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac vdev 0 start 04:f0:21:0e:38:be ath10k: mac vdev 0 start center_freq 5260 phymode 11na-ht40 ath10k: wmi vdev start id 0x0 flags: 0x0, freq 5260, mode 6, ch_flags: 0x6, max_ power: 40 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05260 len 140 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fada40 ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d29f3ca0 ath10k: WMI_VDEV_START_RESP_EVENTID wlan0: direct probe to 04:f0:21:0e:38:be (try 1/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12a05060 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d29f3ca0 ath10k: htc rx completion ep 1 skb d2fad980 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12d23660 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d29f30a0 ath10k: htc rx completion ep 1 skb d2fad8c0 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12e03460 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2e46600 ath10k: htc rx completion ep 1 skb d2fad800 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: authentication with 04:f0:21:0e:38:be timed out ath10k: mac vdev 0 peer delete 04:f0:21:0e:38:be (sta gone) ath10k: wmi peer delete vdev_id 0 peer_addr 04:f0:21:0e:38:be ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05660 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fad8c0 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fad740 ath10k: htt rx, msg_type: 0x4 ath10k: htt peer unmap vdev 0 peer 04:f0:21:0e:38:be id 13 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fad680 ath10k: htt rx, msg_type: 0x4 ath10k: htt peer unmap vdev 0 peer 04:f0:21:0e:38:be id 125 ath10k: mac vdev 0 stop (disassociated ath10k: wmi vdev stop id 0x0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12e03c60 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fad680 ath10k: htc ep 2 got 1 credits (total 1) ath10k: htc rx completion ep 2 skb d29f3be0 ath10k: WMI_VDEV_STOPPED_EVENTID ath10k: mac vdev 0 down ath10k: wmi mgmt vdev down id 0x0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12e03c60 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f3be0 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config channel to 5260MHz (cf1 5260MHz cf2 0MHz width 20 (noht)) ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: mac config power 20 ath10k: wmi pdev set param 3 value 40 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12e03c60 len 20 n_items 1 ath10k: wmi pdev set param 4 value 40 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fad5c0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05660 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdf240 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc rx completion ep 2 skb d29f3b20 ath10k: wmi event debug mesg len 76 ath10k: wmi start scan ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05a60 len 208 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f3b20 ath10k: htc rx completion ep 2 skb d29f3a60 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 1 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_STARTED ath10k: htc rx completion ep 2 skb d29f39a0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d29f38e0 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -97 rx_clear_coun t 2481559 cycle_count 139651552 ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d29f3820 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 8 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_FOREIGN_CHANNEL ath10k: htc rx completion ep 2 skb d29f3760 ath10k: chan info err_code 0 freq 5260 cmd_flags 0 noise_floor 0 rx_clear_count 3019471 cycle_count 140368132 ath10k: htc rx completion ep 2 skb d2e466c0 ath10k: event mgmt rx status 00000000 ath10k: event mgmt rx skb d2e466c0 len 168 ftype 00 stype 80 ath10k: event mgmt rx freq 5260 band 1 snr -19, rate_idx 0 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fad440 ath10k: htt rx, msg_type: 0x1 ath10k: htt rx mgmt ctrl ath10k: htc rx completion ep 2 skb d29f3160 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d2bdf780 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -98 rx_clear_coun t 3041386 cycle_count 152872764 ath10k: htc rx completion ep 2 skb d2bdfc00 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 2 reason 0 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_COMPLETED ath10k: SCAN_REASON_COMPLETED wlan0: authenticate with 04:f0:21:0e:38:be ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config channel to 5260MHz (cf1 5270MHz cf2 0MHz width 40) ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: mac config power 19 ath10k: wmi pdev set param 3 value 38 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12e03c60 len 20 n_items 1 ath10k: wmi pdev set param 4 value 38 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e466c0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05660 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdf300 ath10k: wmi vdev id 0x0 set param 3 value 100 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05660 len 24 n_items 1 ath10k: mac vdev 0 beacon_interval 100 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdf300 ath10k: mac vdev 0 create peer 04:f0:21:0e:38:be ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05660 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdf300 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fad2c0 ath10k: htt rx, msg_type: 0x3 ath10k: htt peer map vdev 0 peer 04:f0:21:0e:38:be id 13 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fad200 ath10k: htt rx, msg_type: 0x3 ath10k: htt peer map vdev 0 peer 04:f0:21:0e:38:be id 125 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac vdev 0 start 04:f0:21:0e:38:be ath10k: mac vdev 0 start center_freq 5260 phymode 11na-ht40 ath10k: wmi vdev start id 0x0 flags: 0x0, freq 5260, mode 6, ch_flags: 0x6, max_ power: 40 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12e03c60 len 140 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fad140 ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d2fedc80 ath10k: WMI_VDEV_START_RESP_EVENTID wlan0: direct probe to 04:f0:21:0e:38:be (try 1/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x1295ae60 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2fac3e0 ath10k: htc rx completion ep 1 skb d2fad080 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12a05060 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2bdf540 ath10k: htc rx completion ep 1 skb d2faeee0 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12a05c60 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2bdfc00 ath10k: htc rx completion ep 1 skb d2faee20 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 ath10k: htc rx completion ep 2 skb d29f32e0 ath10k: wmi event debug mesg len 52 wlan0: authentication with 04:f0:21:0e:38:be timed out ath10k: mac vdev 0 peer delete 04:f0:21:0e:38:be (sta gone) ath10k: wmi peer delete vdev_id 0 peer_addr 04:f0:21:0e:38:be ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05a60 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdf600 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2faed60 ath10k: htt rx, msg_type: 0x4 ath10k: htt peer unmap vdev 0 peer 04:f0:21:0e:38:be id 13 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2faeca0 ath10k: htt rx, msg_type: 0x4 ath10k: htt peer unmap vdev 0 peer 04:f0:21:0e:38:be id 125 ath10k: mac vdev 0 stop (disassociated ath10k: wmi vdev stop id 0x0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05660 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2faeca0 ath10k: htc ep 2 got 1 credits (total 1) ath10k: htc rx completion ep 2 skb d2fedb00 ath10k: WMI_VDEV_STOPPED_EVENTID ath10k: mac vdev 0 down ath10k: wmi mgmt vdev down id 0x0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05660 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fedb00 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config channel to 5260MHz (cf1 5260MHz cf2 0MHz width 20 (noht)) ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: mac config power 20 ath10k: wmi pdev set param 3 value 40 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05660 len 20 n_items 1 ath10k: wmi pdev set param 4 value 40 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdf540 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05a60 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e46600 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc rx completion ep 2 skb d2bdf900 ath10k: wmi event debug mesg len 28 ath10k: wmi start scan ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12e03c60 len 208 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdf900 ath10k: htc rx completion ep 2 skb d2bdf9c0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 1 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_STARTED ath10k: htc rx completion ep 2 skb d2fed8c0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d2fed800 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -97 rx_clear_coun t 3724146 cycle_count 209083730 ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d2fac4a0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 8 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_FOREIGN_CHANNEL ath10k: htc rx completion ep 2 skb d2fac0e0 ath10k: chan info err_code 0 freq 5260 cmd_flags 0 noise_floor 0 rx_clear_count 4306198 cycle_count 209860638 ath10k: htc rx completion ep 2 skb d2fed680 ath10k: event mgmt rx status 00000000 ath10k: event mgmt rx skb d2fed680 len 168 ftype 00 stype 80 ath10k: event mgmt rx freq 5260 band 1 snr -22, rate_idx 0 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2faea60 ath10k: htt rx, msg_type: 0x1 ath10k: htt rx mgmt ctrl ath10k: htc rx completion ep 2 skb d2fed500 ath10k: event mgmt rx status 00000000 ath10k: event mgmt rx skb d2fed500 len 168 ftype 00 stype 80 ath10k: event mgmt rx freq 5260 band 1 snr -19, rate_idx 0 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fae9a0 ath10k: htt rx, msg_type: 0x1 ath10k: htt rx mgmt ctrl ath10k: htc rx completion ep 2 skb d2fed440 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d2fed380 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -98 rx_clear_coun t 4350426 cycle_count 222306446 ath10k: htc rx completion ep 2 skb d2fed2c0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 2 reason 0 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_COMPLETED ath10k: SCAN_REASON_COMPLETED wlan0: authenticate with 04:f0:21:0e:38:be ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config channel to 5260MHz (cf1 5270MHz cf2 0MHz width 40) ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: mac config power 19 ath10k: wmi pdev set param 3 value 38 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12d23260 len 20 n_items 1 ath10k: wmi pdev set param 4 value 38 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fed500 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05a60 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fed680 ath10k: wmi vdev id 0x0 set param 3 value 100 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05a60 len 24 n_items 1 ath10k: mac vdev 0 beacon_interval 100 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fed680 ath10k: mac vdev 0 create peer 04:f0:21:0e:38:be ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05a60 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fed680 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fae820 ath10k: htt rx, msg_type: 0x3 ath10k: htt peer map vdev 0 peer 04:f0:21:0e:38:be id 13 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fae760 ath10k: htt rx, msg_type: 0x3 ath10k: htt peer map vdev 0 peer 04:f0:21:0e:38:be id 125 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac vdev 0 start 04:f0:21:0e:38:be ath10k: mac vdev 0 start center_freq 5260 phymode 11na-ht40 ath10k: wmi vdev start id 0x0 flags: 0x0, freq 5260, mode 6, ch_flags: 0x6, max_ power: 40 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12d23260 len 140 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fae6a0 ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d2fed200 ath10k: WMI_VDEV_START_RESP_EVENTID wlan0: direct probe to 04:f0:21:0e:38:be (try 1/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x1295ae60 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2fad800 ath10k: htc rx completion ep 1 skb d2fae5e0 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12e03460 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2950f20 ath10k: htc rx completion ep 1 skb d2fae520 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3) ath10k: htt tx alloc msdu_id 0 ath10k: pci tx item 0 paddr 0x12d23660 len 60 n_items 1 ath10k: pci hif send complete check ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2fed2c0 ath10k: htc rx completion ep 1 skb d2fae460 ath10k: htt rx, msg_type: 0xE ath10k: htt tx completion msdu_id 0 discard 0 no_ack 0 ath10k: htt tx free msdu_id 0 wlan0: authentication with 04:f0:21:0e:38:be timed out ath10k: mac vdev 0 peer delete 04:f0:21:0e:38:be (sta gone) ath10k: wmi peer delete vdev_id 0 peer_addr 04:f0:21:0e:38:be ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05060 len 24 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fae520 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fae3a0 ath10k: htt rx, msg_type: 0x4 ath10k: htt peer unmap vdev 0 peer 04:f0:21:0e:38:be id 13 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fae2e0 ath10k: htt rx, msg_type: 0x4 ath10k: htt peer unmap vdev 0 peer 04:f0:21:0e:38:be id 125 ath10k: mac vdev 0 stop (disassociated ath10k: wmi vdev stop id 0x0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05a60 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fae2e0 ath10k: htc ep 2 got 1 credits (total 1) ath10k: htc rx completion ep 2 skb d2fade00 ath10k: WMI_VDEV_STOPPED_EVENTID ath10k: mac vdev 0 down ath10k: wmi mgmt vdev down id 0x0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05a60 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2fade00 ath10k: htc ep 2 got 2 credits (total 2) ath10k: mac config channel 5260MHz flags 0x10a radar 0 ath10k: mac config channel to 5260MHz (cf1 5260MHz cf2 0MHz width 20 (noht)) ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: mac config power 20 ath10k: wmi pdev set param 3 value 40 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12a05a60 len 20 n_items 1 ath10k: wmi pdev set param 4 value 40 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2950f20 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12a05060 len 20 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bdfc00 ath10k: htc ep 2 got 2 credits (total 2) ath10k: htc rx completion ep 2 skb d29f33a0 ath10k: wmi event debug mesg len 76 ath10k: wmi start scan ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12d23260 len 208 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d29f33a0 ath10k: htc rx completion ep 2 skb d29f3ee0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 1 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_STARTED ath10k: htc rx completion ep 2 skb d29f3e20 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d2bdf0c0 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -98 rx_clear_coun t 5032278 cycle_count 278515999 ath10k: htc rx completion ep 2 skb d2fad680 ath10k: wmi event debug mesg len 28 ath10k: htc ep 2 got 1 credits (total 2) ath10k: htc rx completion ep 2 skb d29f3ca0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 8 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_FOREIGN_CHANNEL ath10k: htc rx completion ep 2 skb d29f3b20 ath10k: chan info err_code 0 freq 5260 cmd_flags 0 noise_floor 0 rx_clear_count 5570040 cycle_count 279234103 ath10k: htc rx completion ep 2 skb d29f3a60 ath10k: event mgmt rx status 00000000 ath10k: event mgmt rx skb d29f3a60 len 168 ftype 00 stype 80 ath10k: event mgmt rx freq 5260 band 1 snr -21, rate_idx 0 ath10k: pci hif send complete check ath10k: htc rx completion ep 1 skb d2fae0a0 ath10k: htt rx, msg_type: 0x1 ath10k: htt rx mgmt ctrl ath10k: htc rx completion ep 2 skb d29f39a0 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 4 reason 4 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_BSS_CHANNEL ath10k: htc rx completion ep 2 skb d29f38e0 ath10k: chan info err_code 0 freq 5260 cmd_flags 1 noise_floor -98 rx_clear_coun t 5592124 cycle_count 291739211 ath10k: htc rx completion ep 2 skb d29f3820 ath10k: WMI_SCAN_EVENTID ath10k: scan event type 2 reason 0 freq 5260 req_id 40961 scan_id 40960 vdev_id 0 ath10k: SCAN_EVENT_COMPLETED ath10k: SCAN_REASON_COMPLETED ath10k: mac vdev 0 delete (remove interface) ath10k: WMI vdev delete id 0 ath10k: htc ep 2 consumed 1 credits (total 1) ath10k: pci tx item 0 paddr 0x12e03460 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2950320 ath10k: mac monitor refs: promisc 0 monitor 0 cac 0 ath10k: htc ep 2 consumed 1 credits (total 0) ath10k: HTC: endpoint 2 needs credit update ath10k: pci tx item 0 paddr 0x12e03460 len 16 n_items 1 ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2950320 ath10k: htc ep 2 got 2 credits (total 2)
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
I used a pc with a adapter usb that support wifi 5Ghz to connect to my AP (in channel 52) and capture airlog from wireshark. It goes further than my station (which has same hardware and software like my AP) cause there is ACK of probe request and Deauthentification too. May be it is intersting with you
And sorry for spamming (with 2nd mail) :D
Regards,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
________________________________________
De : ath10k [[email protected]] de la part de Vu Hai NGUYEN [[email protected]] Date d'envoi : jeudi 22 mai 2014 16:40
À : Janusz Dziedzic
Cc : Patrick CARNEIRO RODRIGUEZ; [email protected]
Objet : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 11 lines
Could you get trace log with
debug_mask=0xffffff3f?You can also start hostapd with -ddt -T then we will have all logs in trace :) You can also add traces from mac80211, cfg80211
Here description:
http://wireless.kernel.org/en/users/Drivers/ath10k/debugBTW, seems you have wrong power constraint configuration - best remove this from hostapd.conf file.
I didn't have the option -T in my hostapd, only those:
options:
-h show this usage -d show more debug messages (-dd for even more) -B run daemon in the background -e entropy file -g global control interface path -G group for control interfaces -P PID file -K include key data in debug messages -t include timestamps in some debug messages -v show hostapd version
Is it because I don't have package trace installed in my kernel????
You can found in the attached file debug msg from hostapd (apd_52.txt), wpa_supp (wpa_52.txt), dmesg from AP (dmesg_apd.txt) and dmesg from STA (dmesg_wpa.txt) with the debugmask=0xffffff3f with the airlog of wireshark (airelog_52).
Small question: If I use the firmware version 999, the frame of Probe Request from Station have Mac address source: SecureWo_12:34:56 and with the version 10.1.467-2.1 I get the true address mac, is this normal?
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to Vu Hai NGUYENQuoted 12 lines · Vu Hai NGUYEN
I didn't have the option -T in my hostapd, only those:
options:-h show this usage -d show more debug messages (-dd for even more) -B run daemon in the background -e entropy file -g global control interface path -G group for control interfaces -P PID file -K include key data in debug messages -t include timestamps in some debug messages -v show hostapd version
Quoted 1 line
Is it because I don't have package trace installed in my kernel????
You need to enable CONFIG_DEBUG_LINUX_TRACING in hostapd to get -T switch. It's documented here:
http://wireless.kernel.org/en/developers/Documentation/mac80211/tracing
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
A message that is not in the archive (sent off-list or not yet received): EE97821C81277E459BEA5C6384C6F241012F109978E8@srvexch01.SODIELEC.local
A message that is not in the archive (sent off-list or not yet received): EE97821C81277E459BEA5C6384C6F241012F109978E9@srvexch01.SODIELEC.local
Re: RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 3 lines · Vu Hai NGUYEN
P/S: I sent this mail yesterday but the size of file are too big (It ask me to wait for the moderator replied) so I had to compress and resend it.
The server will still reject it as it was over 500 kB. Don't send big files via email, that will just overload the servers. Instead upload the file to a server and send a link to the list.
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to a message not in the archiveQuoted 5 lines
You need to enable
CONFIG_DEBUG_LINUX_TRACINGin hostapd to get -T switch. It's documented here:http://wireless.kernel.org/en/developers/Documentation/mac80211/tracing
Thanks, I change the config to build hostapd and install trace-cmd in my kernel, 2 trace.dat file in the link below (1 AP and 1 -STA)
https://drive.google.com/folderview?id=0BwjHLCkPdrW6RVd3Um1vVDJhRm8&usp=drive_web
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 9 lines · Vu Hai NGUYEN
Quoted 5 lines
You need to enable
CONFIG_DEBUG_LINUX_TRACINGin hostapd to get -T switch. It's documented here:http://wireless.kernel.org/en/developers/Documentation/mac80211/tracing
Thanks, I change the config to build hostapd and install trace-cmd in my kernel, 2 trace.dat file in the link below (1 AP and 1 -STA)
https://drive.google.com/folderview?id=0BwjHLCkPdrW6RVd3Um1vVDJhRm8&usp=drive_web
Thanks for logs.
Seems hostapd get probe request and try to send probe responses but using monitor interface - driver never get this frame.
Seems you have set use_monitor=1 in hostapd - why? Did you hack/overwrie this? ath10k don't need dedicated monitor interface for AP mode.
BR
Janusz
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 5 lines
Thanks for logs.
Seems hostapd get probe request and try to send probe responses but using monitor interface - driver never get this frame.
Seems you have set use_monitor=1 in hostapd - why? Did you hack/overwrie this? ath10k don't need dedicated monitor interface for AP mode.
Thank you for your response, I don't set that parameter in hostapd file and even in the example file of hostapd.conf, I don't see that parameter. Here is my hostapd.conf:
interface=wlan0
driver=nl80211
bridge=br0
country_code=FR
ieee80211d=1
ieee80211h=1
hw_mode=a
ieee80211n=1
wds_sta=1 ht_capab=[HT40+][SMPS-STATIC][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-36] channel=52
rts_threshold=2347
beacon_int=100
wmm_enabled=1
logger_syslog=-1
logger_syslog_level=0
logger_stdout=-1
logger_stdout_level=2
ctrl_interface_group=0
macaddr_acl=0
auth_algs=1
eapol_key_index_workaround=0
eapol_version=1
eap_server=0
ssid=ath10k
wpa=0
wpa_key_mgmt=WPA-PSK
wpa_passphrase=password
wpa_group_rekey=86360
But as you said, when I run hostapd (with option -dd) I saw this output:
nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=1
It means that parameter is set automatically by the driver nl80211?. And I guess that hostapd do that itself. Do you know why or can you show me how to set that parameter off to do a test?
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
A message that is not in the archive (sent off-list or not yet received): CAFED-j=i5uhjqaJYL+dm_ui48EFeHG3isHYSSSo=+3gk-Wa5YQ@mail.gmail.com
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 55 lines · Janusz Dziedzic
2014-05-26 15:45 GMT+02:00 Vu Hai NGUYEN <[email protected]>:
Quoted 42 lines
Quoted 6 lines
Thanks for logs.
Seems hostapd get probe request and try to send probe responses but using monitor interface - driver never get this frame.
Seems you have set use_monitor=1 in hostapd - why? Did you hack/overwrie this?
ath10k don't need dedicated monitor interface for AP mode.Thank you for your response, I don't set that parameter in hostapd file and even in the example file of hostapd.conf, I don't see that parameter. Here is my hostapd.conf:
interface=wlan0
driver=nl80211
bridge=br0
country_code=FR
ieee80211d=1
ieee80211h=1
hw_mode=a
ieee80211n=1
wds_sta=1ht_capab=[HT40+][SMPS-STATIC][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-36] channel=52
rts_threshold=2347
beacon_int=100
wmm_enabled=1
logger_syslog=-1
logger_syslog_level=0
logger_stdout=-1
logger_stdout_level=2
ctrl_interface_group=0
macaddr_acl=0
auth_algs=1
eapol_key_index_workaround=0
eapol_version=1
eap_server=0
ssid=ath10k
wpa=0
wpa_key_mgmt=WPA-PSK
wpa_passphrase=password
wpa_group_rekey=86360Quoted 7 lines
But as you said, when I run hostapd (with option -dd) I saw this output:
nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=1
It means that parameter is set automatically by the driver nl80211?. And I guess that hostapd do that itself.
Do you know why or can you show me how to set that parameter off to do a test?
Quoted 5 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.c
adding ath10k while html was removed :-)
BR
Janusz
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 5 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.c
It's just about the module or it can be related to building hostapd too?
Quoted 1 line
adding ath10k while html was removed :-)
Sorry I don't get this. What do you mean about html here?
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to Janusz DziedzicQuoted 6 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.c
I tried to trace back where the problem is in the code but can not found anything strange, since the modules that I compiled from backports seems normal (though I get some warnings (unused variable and defined but not used like:
/backports-output/net/wireless/sysfs.c:78:1: warning: 'init_ieee80211_attrs' defined but not used [-Wunused-function]
/backports-output/drivers/net/wireless/ath/ath10k/ce.c:337:21: warning: unused variable 'ar_pci' [-Wunused-variable]
/backports-output/net/mac80211/chan.c:858:26: warning: unused variable 'local' [-Wunused-variable]
DO I have to activate cfg80211 and mac80211 when I built my old kernel 3.2.36 (so that the .config of the kernel is changed) or I can build them directly from backport? I just link them to my kernel by setting KLIB=... and KLIB_BUILD=... Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 5 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.c
Problem solved. I looked in the driver_nl80211.c and found that use_monitor relied on "poll_command_supported" and "data_tx_status". I printed these 2 parameters and saw that data_tx_status=0, it depends on NL80211_FEATURE_SK_TX_STATUS and this parameter was affected to the flags of wiphy->features, defined in /net/mac80211/main.c.I find this parameter was set = 0 in /backport-include/linux/nl80211.h That's why montior mode was forced to used with AP mode. I set that parameter = 1 and no more monitor interface in AP mode, my AP work in DFS mode now.
I'll write a mail to backport mail list to ask them why do they set that parameter=0.
I get another question: There a conflict of information about HT40+ and HT40- in hostapd and ht40allow_map (fromdebugfs).
In the hostapd.conf example file:
# Note: There are limits on which channels can be used with HT40- and
# HT40+. Following table shows the channels that may be available for
# HT40- and HT40+ use per IEEE 802.11n Annex J:
# freq HT40- HT40+
# 5 GHz 40,48,56,64 36,44,52,60
It means the channel 48 is not available in HT40+. But the info from ht40allow_map said that channel 5240 Mhz (ie 48) is available in both 40+ and 40-. If I set ht-capab=[HT40+] and channel=48, hostapd can not setup AP mode.
And the channel 140 can not be set neither in bandwidth 40+ nor 40- even my "iw list' show that channel 140 is available.
Is there a problem with ht40allow_map?
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 9 lines · Vu Hai NGUYEN
Quoted 5 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.cProblem solved. I looked in the
driver_nl80211.cand found thatuse_monitorrelied on "poll_command_supported" and "data_tx_status". I printed these 2 parameters and saw that data_tx_status=0, it depends onNL80211_FEATURE_SK_TX_STATUSand this parameter was affected to the flags ofwiphy->features, defined in /net/mac80211/main.c.I find this parameter was set = 0 in /backport-include/linux/nl80211.h That's why montior mode was forced to used with AP mode. I set that parameter = 1 and no more monitor interface in AP mode, my AP work in DFS mode now.
I'll write a mail to backport mail list to ask them why do they set that parameter=0.
So, did my firmware actually fix something, or was the problem just with the backports and how you were using the official firmware?
Quoted 12 lines
I get another question: There a conflict of information about HT40+ and HT40- in hostapd and
ht40allow_map(fromdebugfs).
In the hostapd.conf example file:
# Note: There are limits on which channels can be used with HT40- and
# HT40+. Following table shows the channels that may be available for
# HT40- and HT40+ use per IEEE 802.11n Annex J:
# freq HT40- HT40+
# 5 GHz 40,48,56,64 36,44,52,60
It means the channel 48 is not available in HT40+. But the info fromht40allow_mapsaid that channel 5240 Mhz (ie 48) is available in both 40+ and 40-. If I set ht-capab=[HT40+] and channel=48, hostapd can not setup AP mode.
And the channel 140 can not be set neither in bandwidth 40+ nor 40- even my "iw list' show that channel 140 is available.
Is there a problem withht40allow_map?
I'm not sure about any of this...might want to look at the hostapd code or log messages to see why it fails to start.
Thanks,
Ben
Quoted 13 lines
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 6 lines · Vu Hai NGUYEN
Quoted 6 lines
Quoted 5 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.c
Quoted 6 lines
Quoted 3 lines
Problem solved. I looked in the
driver_nl80211.cand found thatuse_monitorrelied on "poll_command_supported" and "data_tx_status". I printed these 2 parameters and saw that data_tx_status=0, it depends on >>NL80211_FEATURE_SK_TX_STATUS and this parameter was affected to the flags ofwiphy->features, defined in /net/mac80211/main.c.I find this parameter was set = 0 in /backport-include/linux/nl80211.h That's why montior mode was forced to used with AP mode. I set that parameter = 1 and no more monitor interface in AP mode, my AP work in DFS mode now.
I'll write a mail to backport mail list to ask them why do they set that parameter=0.So, did my firmware actually fix something, or was the problem just with the backports and how you were using the official firmware?
Your firmware allows me to enter the promiscuous mode to set up bridge network for myStation (using wpa_supplicant), If I use the official firmware (10.1.467-2.1) for my station, it crashed after associated with an AP. Thing that I've changed concern the backport, I disable monitor interface in AP mode to solve the connection problem in a channel using DFS and it doesn't concern your firmware. Another thing that I've mentioned in my mail before that my AP create this interface when my station connected to my AP:
Interface wlan0.sta1
ifindex 10
wdev 0x6
addr 04:f0:21:0e:38:be
type AP/VLAN
channel 36 (5180 MHz), width: 40 MHz, center1: 5190 MHzI am wrong because if I set up Router network for my STA, my AP won't create the interface wlan.sta1 when my STA connect, but if my STA is set up in Bridge network, the interface wlan0.sta1 will be created so this doesn't concern your firmware too.
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 7 lines · Vu Hai NGUYEN
Quoted 6 lines · Vu Hai NGUYEN
Quoted 6 lines
Quoted 5 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.c
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Problem solved. I looked in the
driver_nl80211.cand found thatuse_monitorrelied on "poll_command_supported" and "data_tx_status". I printed these 2 parameters and saw that data_tx_status=0, it depends on >>NL80211_FEATURE_SK_TX_STATUS and this parameter was affected to the flags ofwiphy->features, defined in /net/mac80211/main.c.I find this parameter was set = 0 in /backport-include/linux/nl80211.h That's why montior mode was forced to used with AP mode. I set that parameter = 1 and no more monitor interface in AP mode, my AP work in DFS mode now.
I'll write a mail to backport mail list to ask them why do they set that parameter=0.So, did my firmware actually fix something, or was the problem just with the backports and how you were using the official firmware?
Your firmware allows me to enter the promiscuous mode to set up bridge network for myStation (using
wpa_supplicant), If I use the official firmware (10.1.467-2.1) for my station, it crashed after associated with an AP. Thing that I've changed concern the backport, I disable monitor interface in AP mode to solve the connection problem in a channel using DFS and it doesn't concern your firmware.
Thanks for the confirmation. I haven't tested bridged networks yet, but maybe you were hitting some more general firmware problem that I had already fixed.
Ben
Signature · 7 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 4 lines
Quoted 1 line
Your firmware allows me to enter the promiscuous mode to set up bridge network for myStation (using
wpa_supplicant), If I use the official firmware (10.1.467-2.1) for my station, it crashed after associated with an AP. Thing that I've >>changed concern the backport, I disable monitor interface in AP mode to solve the connection problem in a channel using DFS and it doesn't concern your firmware.Thanks for the confirmation. I haven't tested bridged networks yet, but maybe you were hitting some more general firmware problem that I had already fixed.
Hi Ben, I just discover something news, when I run my program with your firmware, I can not see a channel DFS (from command "iw wlan0 scan", it does not show me the network using a channel DFS). I can see the channel DFS if I use the official firmware (both 999 or 10.1). Do you need me to trace back something so that you can detect where the problem is?
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 7 lines · Vu Hai NGUYEN
Quoted 4 lines
Quoted 1 line
Your firmware allows me to enter the promiscuous mode to set up bridge network for myStation (using
wpa_supplicant), If I use the official firmware (10.1.467-2.1) for my station, it crashed after associated with an AP. Thing that I've >>changed concern the backport, I disable monitor interface in AP mode to solve the connection problem in a channel using DFS and it doesn't concern your firmware.Thanks for the confirmation. I haven't tested bridged networks yet, but maybe you were hitting some more general firmware problem that I had already fixed.
Hi Ben, I just discover something news, when I run my program with your firmware, I can not see a channel DFS (from command "iw wlan0 scan", it does not show me the network using a channel DFS). I can see the channel DFS if I use the official firmware (both 999 or 10.1). Do you need me to trace back something so that you can detect where the problem is?
I could try building a set of binaries and let you bisect the problem, perhaps.
This might take a bit of your time, but if you are willing, I will write a script to create firmware binaries for each of my commits so you can do a manual bisect.
I also think that the '2-1' part of the upstream 10.1 firmware is not in the source code QCA made available to me, so there may be upstream fixes I have not seen, and possibly part of that enables/fixes DFS.
I am not aware of any changes in my firmware that should have broken DFS, but of course with 100+ commits, I could have easily added regressions...
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 6 lines
I could try building a set of binaries and let you bisect the problem, perhaps.
This might take a bit of your time, but if you are willing, I will write a script to create firmware binaries for each of my commits so you can do a manual bisect.
Quoted 6 lines
I also think that the '2-1' part of the upstream 10.1 firmware is not in the source code QCA made available to me, so there may be upstream fixes I have not seen, and possibly part of that enables/fixes DFS.
I am not aware of any changes in my firmware that should have broken DFS, but of course with 100+ commits, I could have easily added regressions...
Yes, I'll try it, you can explain it to me if I don't know how to apply your script?
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 6 lines · Vu Hai NGUYEN
Quoted 5 lines
I could try building a set of binaries and let you bisect the problem, perhaps.
This might take a bit of your time, but if you are willing, I will write a script to create firmware binaries for each of my commits so you can do a manual bisect.
Quoted 8 lines
Quoted 6 lines
I also think that the '2-1' part of the upstream 10.1 firmware is not in the source code QCA made available to me, so there may be upstream fixes I have not seen, and possibly part of that enables/fixes DFS.
I am not aware of any changes in my firmware that should have broken DFS, but of course with 100+ commits, I could have easily added regressions...
Yes, I'll try it, you can explain it to me if I don't know how to apply your script?
I have a script to build every commit now, but except for the first few and the last few images, you would need various driver changes to work with them.
I can rebase my firmware changes so that hopefully all (or at least most) of the images will work on standard kernels, but it may be a few days before I can get that done.
In the meantime, please try these two:
Compiled from original source received from QCA:
http://www.candelatech.com/downloads/firmware-2-community-commit-0-207ce4b.bin
It appeared to me that that code had a regression, so next commit fixed that:
http://www.candelatech.com/downloads/firmware-2-community-commit-1-5717c65.bin
If either of these work with DFS, then some change I made later broke it, and I can build the rest of the images so we can figure out where.
Thanks,
Ben
Signature · 7 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 13 lines
I have a script to build every commit now, but except for the first few and the last few images, you would need various driver changes to work with them.
I can rebase my firmware changes so that hopefully all (or at least most) of the images will work on standard kernels, but it may be a few days before I can get that done.
In the meantime, please try these two:
Compiled from original source received from QCA:
http://www.candelatech.com/downloads/firmware-2-community-commit-0-207ce4b.bin
Quoted 7 lines
It appeared to me that that code had a regression, so next commit fixed that:
http://www.candelatech.com/downloads/firmware-2-community-commit-1-5717c65.bin
If either of these work with DFS, then some change I made later broke it, and I can build the rest of the images so we can figure out where.
Both firmware in the link that you gave me work well, my station associate directly with the AP after running wpa_supplicant.
But then I re-put your firmware version non commercial, my STA did not associate directly after running wpa_supp, it keep print the message SCAN EVENT STARTED of wlan0. I run "iw wlan0 scan" and some times it can see and associate with my AP, some times it can not see the network with channel DFS, I mean it is not stable.
And I had other question too, I thought that you've done some test with ath10k in mode 802.11ac by iperf? What is the maximum rate that you obtain?
I'm using 2 PC and connect each one to my AP and STA, but the max rate that I had is around 120Mbps only, in both 802.11n and 802.11ac.
Strange things is that I config 3 antennas in used and leave the rate automatically (Don't set rates using "iw"), my station dump and file "fw_stats" in debugfs show me the rates of MCS 7 or 15 (in 802.11n) and NSS1 or 2 (in 802.11ac). It never set in MCS 23 or NSS3, though my module wifi support 3 STREAMS, 1 can see it from "iw list":
VHT RX MCS set:
1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: MCS 0-9
But it also show me: VHT RX highest supported: 0 Mbps and VHT TX highest supported: 0 Mbps, is there something wrong with it?
If I use "iw" to fixed rate, the info from station dump (TX rates is always false because of firmware issue), but RX rate and the info from "fw_stats" is same thing as what I fixed (I can fixe rate at MCS23 and NSS 3 too, I also verified with dmesg | grep mac to see debug message from ath10k). But as I said above, my rate is around 120 Mbps in iperf.
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 16 lines · Vu Hai NGUYEN
Quoted 15 lines
I have a script to build every commit now, but except for the first few and the last few images, you would need various driver changes to work with them.
I can rebase my firmware changes so that hopefully all (or at least most) of the images will work on standard kernels, but it may be a few days before I can get that done.
In the meantime, please try these two:
Compiled from original source received from QCA:
http://www.candelatech.com/downloads/firmware-2-community-commit-0-207ce4b.bin
It appeared to me that that code had a regression, so next commit fixed that:
Quoted 8 lines
Quoted 4 lines
http://www.candelatech.com/downloads/firmware-2-community-commit-1-5717c65.bin
If either of these work with DFS, then some change I made later broke it, and I can build the rest of the images so we can figure out where.
Both firmware in the link that you gave me work well, my station associate directly with the AP after running
wpa_supplicant.
But then I re-put your firmware version non commercial, my STA did not associate directly after runningwpa_supp, it keep print the message SCAN EVENT STARTED of wlan0. I run "iw wlan0 scan" and some times it can see and associate with my AP, some times it can not see the network with channel DFS, I mean it is not stable.
Ok, I will work on a series of firmwares for each of my commits so we can find the bad commit and fix it.
Quoted 10 lines
And I had other question too, I thought that you've done some test with ath10k in mode 802.11ac by iperf? What is the maximum rate that you obtain?
I'm using 2 PC and connect each one to my AP and STA, but the max rate that I had is around 120Mbps only, in both 802.11n and 802.11ac.
Strange things is that I config 3 antennas in used and leave the rate automatically (Don't set rates using "iw"), my station dump and file "fw_stats" in debugfs show me the rates of MCS 7 or 15 (in 802.11n) and NSS1 or 2 (in 802.11ac). It never set in MCS 23 or NSS3, though my module wifi support 3 STREAMS, 1 can see it from "iw list":
VHT RX MCS set:1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: MCS 0-9But it also show me: VHT RX highest supported: 0 Mbps and VHT TX highest supported: 0 Mbps, is there something wrong with it?
If I use "iw" to fixed rate, the info from station dump (TX rates is always false because of firmware issue), but RX rate and the info from "fw_stats" is same thing as what I fixed (I can fixe rate at MCS23 and NSS 3 too, I also verified with dmesg | grep mac to see debug message from ath10k). But as I said above, my rate is around 120 Mbps in iperf.
We can get 500+Mbps download, and about 400Mbps upload, TCP traffic using our own traffic generator, which is somewhat similar to iperf. Use large tx/rx buffers, large write sizes, and 10+ streams in iperf for more optimal throughput.
We often get rates reported at 1.3Gbps, so it seems in our tests we train up well.
Unless you are using a modified driver with my firmware, you will not get useful tx-rate stats reported, but I think the rx-rate is accurate with latest upstream driver.
Thanks,
Ben
Quoted 7 lines
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to Vu Hai NGUYENQuoted 16 lines · Vu Hai NGUYEN
Quoted 15 lines
I have a script to build every commit now, but except for the first few and the last few images, you would need various driver changes to work with them.
I can rebase my firmware changes so that hopefully all (or at least most) of the images will work on standard kernels, but it may be a few days before I can get that done.
In the meantime, please try these two:
Compiled from original source received from QCA:
http://www.candelatech.com/downloads/firmware-2-community-commit-0-207ce4b.bin
It appeared to me that that code had a regression, so next commit fixed that:
Quoted 8 lines
Quoted 4 lines
http://www.candelatech.com/downloads/firmware-2-community-commit-1-5717c65.bin
If either of these work with DFS, then some change I made later broke it, and I can build the rest of the images so we can figure out where.
Both firmware in the link that you gave me work well, my station associate directly with the AP after running
wpa_supplicant.
But then I re-put your firmware version non commercial, my STA did not associate directly after runningwpa_supp, it keep print the message SCAN EVENT STARTED of wlan0. I run "iw wlan0 scan" and some times it can see and associate with my AP, some times it can not see the network with channel DFS, I mean it is not stable.
Ok, I have built an image for each of my commits, and I have attempted to rebase my changes so that these kernels should work on un-patched drivers. I have not actually tested these various images on un-patched drivers, so if you see any un-expected problems, let me know and I can test those specific images.
From your previous testing, you know the first commit should be OK for DFS, and the last commit (172) is not. To bisect, choose an image in the middle (ie, commit 86) and see if it works. If so, choose middle one between 86 and 172, if not, choose middle one between 0 and 86...repeat until you find the first bad commit and let me know what that is and I will try to figure out the problem in the firmware.
http://www.candelatech.com/downloads/ath10k-fw-all-images/
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 5 lines
Ok, I have built an image for each of my commits, and I have attempted to rebase my changes so that these kernels should work on un-patched drivers. I have not actually tested these various images on un-patched drivers, so if you see any un-expected problems, let me know and I can test those specific images.
From your previous testing, you know the first commit should be OK for DFS, and the l>ast commit (172) is not. To bisect, choose an image in the middle (ie, commit 86)
Quoted 5 lines
and see if it works. If so, choose middle one between 86 and 172, if not, choose middle one between 0 and 86...repeat until you find the first bad commit and let me know what that is and I will try to figure out the problem in the firmware.
Thanks for building the image, I found out the diffrent is between the the 58th (work with DFS) and 59th commit (can not see DFS).
Here is my serial of test: 86: KO => 43 OK => 64 KO => 53 OK => 58 OK => 61 KO => 59 KO. Then I change between 58 and 59th commit one more time to confirm the different. Is that all of your commit that you've done? Cause with the firmware-2-ct-non-commercial.bin I can enter promiscuous mode to set up bridge network, but yesterday I tried your 2 firmwares and today with the firmware of 172th commit they are all broke in bridge network.
If not, can you rebuild other image so that I can trace your commit that allow to enter promiscuous mode?
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 11 lines · Vu Hai NGUYEN
Quoted 6 lines
Ok, I have built an image for each of my commits, and I have attempted to rebase my changes so that these kernels should work on un-patched drivers. I have not actually tested these various images on un-patched drivers, so if you see any un-expected problems, let me know and I can test those specific images.
From your previous testing, you know the first commit should be OK for DFS, and the
l>ast commit (172) is not. To bisect, choose an image in the middle (ie, commit 86)
Quoted 4 lines
and see if it works. If so, choose middle one between 86 and 172, if not, choose middle one between 0 and 86...repeat until you find the first bad commit and let me know what that is and I will try to figure out the problem in the firmware.
Quoted 6 lines
Thanks for building the image, I found out the diffrent is between the the 58th (work with DFS) and 59th commit (can not see DFS).
Here is my serial of test: 86: KO => 43 OK => 64 KO => 53 OK => 58 OK => 61 KO => 59 KO. Then I change between 58 and 59th commit one more time to confirm the different. Is that all of your commit that you've done? Cause with the firmware-2-ct-non-commercial.bin I can enter promiscuous mode to set up bridge network, but yesterday I tried your 2 firmwares and today with the firmware of 172th commit they are all broke in bridge network.
Ok, I will look at the 59th commit today.
As for commit 172, it should be virtually identical to the firmware-2-ct-non-commercial.bin
I will double-check that I didn't miss some commit.
Can you try each of these and let me know if they work for promisc mode?
http://www.candelatech.com/downloads/firmware-2-ct-community-3.bin
http://www.candelatech.com/downloads/firmware-2-ct-community-2.bin
http://www.candelatech.com/downloads/firmware-2-ct-community-1.bin
And, in case it's a bit of a race, maybe try rebooting with each firmware several times to see if it works in promisc sometimes and not others?
Thanks,
Ben
Quoted 19 lines
If not, can you rebuild other image so that I can trace your commit that allow to enter promiscuous mode?
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to Vu Hai NGUYENQuoted 7 lines · Vu Hai NGUYEN
Quoted 6 lines
Ok, I have built an image for each of my commits, and I have attempted to rebase my changes so that these kernels should work on un-patched drivers. I have not actually tested these various images on un-patched drivers, so if you see any un-expected problems, let me know and I can test those specific images.
From your previous testing, you know the first commit should be OK for DFS, and the
l>ast commit (172) is not. To bisect, choose an image in the middle (ie, commit 86)
Quoted 8 lines
Quoted 5 lines
and see if it works. If so, choose middle one between 86 and 172, if not, choose middle one between 0 and 86...repeat until you find the first bad commit and let me know what that is and I will try to figure out the problem in the firmware.
Thanks for building the image, I found out the diffrent is between the the 58th (work with DFS) and 59th commit (can not see DFS).
Here is my serial of test: 86: KO => 43 OK => 64 KO => 53 OK => 58 OK => 61 KO => 59 KO. Then I change between 58 and 59th commit one more time to confirm the different.
Ok, the difference must be changes I made to the scanning state machine. That patch was fairly big, and did several different things. I have split it up into 4 separate patches to try to narrow down where the problem was introduced.
Can you try these firmware images in order and let me know the first that fails to do DFS properly? The scan-1 should be white-space and debugging only, so hopefully it works.
firmware-2-community-scan1.bin
firmware-2-community-scan2.bin
firmware-2-community-scan3.bin
firmware-2-community-scan4.bin
http://www.candelatech.com/downloads/
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 9 lines
Ok, the difference must be changes I made to the scanning state machine. That patch was fairly big, and did several different things. I have split it up into 4 separate patches to try to narrow down where the problem was introduced.
Can you try these firmware images in order and let me know the first that fails to do DFS properly? The scan-1 should be white-space and debugging only, so hopefully it works.
Quoted 6 lines
firmware-2-community-scan1.bin
firmware-2-community-scan2.bin
firmware-2-community-scan3.bin
firmware-2-community-scan4.bin
Thank you, I did the test, the first one and second one (scan 1 & 2) can work with DFS, the last 2 cann't. I also retried to test promiscuous mode, may be yesterday I did something wrong when copy-paste the firmware. Today I try the 172 commit firmware and it works in promisc mode, so again with binary search I redo my serie of test, the different is between 120 (broken firmware) and 121 (non broken).
(My serie is: 172 OK => 86 KO => 129 OK => 107 KO => 118 KO => 124 OK => 121 OK => 120 KO, than re-change to confirm the different :D)
Hope that is helpful for you
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 9 lines · Vu Hai NGUYEN
Quoted 9 lines
Ok, the difference must be changes I made to the scanning state machine. That patch was fairly big, and did several different things. I have split it up into 4 separate patches to try to narrow down where the problem was introduced.
Can you try these firmware images in order and let me know the first that fails to do DFS properly? The scan-1 should be white-space and debugging only, so hopefully it works.
Quoted 8 lines
Quoted 6 lines
firmware-2-community-scan1.bin
firmware-2-community-scan2.bin
firmware-2-community-scan3.bin
firmware-2-community-scan4.binThank you, I did the test, the first one and second one (scan 1 & 2) can work with DFS, the last 2 cann't.
Ok, looks like the patch where I change the scan state machine logic is the bad one.
I will review it carefully and maybe try splitting it further today.
Are you able to test with a modified kernel? If so, I can add debuglog messages to the firmware and give you a kernel ath10k patch to print those out in the kernel logs so you can send them to me for decoding...
Anyone have any ideas what sorts of problems I might be introducing by changing around the scan logic? Normal scanning seems to at least mostly work...how is DFS special?
Quoted 6 lines
I also retried to test promiscuous mode, may be yesterday I did something wrong when copy-paste the firmware. Today I try the 172 commit firmware and it works in promisc mode, so again with binary search I redo my serie of test, the different is between 120 (broken firmware) and 121 (non broken).
(My serie is: 172 OK => 86 KO => 129 OK => 107 KO => 118 KO => 124 OK => 121 OK => 120 KO, than re-change to confirm the different :D)
Hope that is helpful for you
That is interesting...patch 121 is small and just fixes a firmware crash I was seeing related to null dereference in beacon config logic. Do you see firmware crashes for build 120, or does it just silently not work?
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 3 lines
Can you please see if this firmware is any better for the DFS issue?
http://www.candelatech.com/downloads/firmware-2-community-scan3-a.bin
Thanks, I check your firmware but it can not fix the problem
Quoted 7 lines
Ok, looks like the patch where I change the scan state machine logic is the bad one.
I will review it carefully and maybe try splitting it further today.
Are you able to test with a modified kernel? If so, I can add debuglog messages to the firmware and give you a kernel ath10k patch to print those out in the kernel logs so you can send them to me for decoding...
Sorry I don't really get it, you mean that I can re-compiled ath10k for my own kernel? Actually I'm using backport to compile ath10k for my kernel 3.2.36 provided for my chipset, If so, I can do it.
Quoted 12 lines
Anyone have any ideas what sorts of problems I might be introducing by changing around the scan logic? Normal scanning seems to at least mostly work...how is DFS special?
Quoted 6 lines
I also retried to test promiscuous mode, may be yesterday I did something wrong when copy-paste the firmware. Today I try the 172 commit firmware and it works in promisc mode, so again with binary search I redo my serie of test, the different is between 120 (broken firmware) and 121 (non broken).
(My serie is: 172 OK => 86 KO => 129 OK => 107 KO => 118 KO => 124 OK => 121 OK => 120 KO, than re-change to confirm the different :D)
Hope that is helpful for you
Quoted 3 lines
That is interesting...patch 121 is small and just fixes a firmware crash I was seeing related to null dereference in beacon config logic. Do you see firmware crashes for build 120, or does it just silently not work?
Yes it crashed once the STA associate to my AP in bridge network (promisc mode)
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 5 lines · Vu Hai NGUYEN
Quoted 3 lines
Can you please see if this firmware is any better for the DFS issue?
http://www.candelatech.com/downloads/firmware-2-community-scan3-a.bin
Thanks, I check your firmware but it can not fix the problem
Can you explain how you test this? Do I need a special AP configuration to do the test, or is a normal ath10k NIC and hostapd enough?
I can try to reproduce the problem and test the fixes here.
Quoted 11 lines
Quoted 7 lines
Ok, looks like the patch where I change the scan state machine logic is the bad one.
I will review it carefully and maybe try splitting it further today.
Are you able to test with a modified kernel? If so, I can add debuglog messages to the firmware and give you a kernel ath10k patch to print those out in the kernel logs so you can send them to me for decoding...
Sorry I don't really get it, you mean that I can re-compiled ath10k for my own kernel? Actually I'm using backport to compile ath10k for my kernel 3.2.36 provided for my chipset, If so, I can do it.
Let me try to reproduce it myself first..that will be the fastest way for me to fix the problem I think.
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 4 lines
Can you explain how you test this? Do I need a special AP configuration to do the test, or is a normal ath10k NIC and hostapd enough?
I can try to reproduce the problem and test the fixes here.
In my code, I copy the firmware chosen (10.1, 999 or CT) from another folder to /lib/firmware/ath10k/... before loading the modules of ath10k. Then I set up network (bridge or router) and finally run hostapd (if AP) and wpa_supplicant (if STA). Each time I change a parameter of my network the program will kill almost all the actual processus, unload the modules and then reload, run new processus ....
Btw, I think that there is a conflict in your hostapd config file. I saw that you use channel 52 and vht_oper_centr_freq_seg0_idx=54, it means that you use 40 MHz operating Channel width? If so vht_oper_chwidth=1 should be set to 0. If you want to use 80Mhz Channel width you should set vht_oper_centr_freq_seg0_idx=58.
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 10 lines · Vu Hai NGUYEN
Quoted 4 lines
Can you explain how you test this? Do I need a special AP configuration to do the test, or is a normal ath10k NIC and hostapd enough?
I can try to reproduce the problem and test the fixes here.
In my code, I copy the firmware chosen (10.1, 999 or CT) from another folder to
/lib/firmware/ath10k/... before loading the modules of ath10k. Then I set up network (bridge or router) and finally run hostapd (if AP) andwpa_supplicant(if STA). Each time I change a parameter of my network the program will kill almost all the actual processus, unload the modules and then reload, run new processus ....
Quoted 4 lines
Btw, I think that there is a conflict in your hostapd config file. I saw that you use channel 52 and vht_oper_centr_freq_seg0_idx=54, it means that you use 40 MHz operating Channel width? If so vht_oper_chwidth=1 should be set to 0. If you want to use 80Mhz Channel width you should set vht_oper_centr_freq_seg0_idx=58.
Can you please try this firmware:
http://www.candelatech.com/downloads/firmware-2-community-scan-X.bin
I have verified that it works fine for me when connecting to an AP on a DFS channel. It should have the bridging fix as well.
There was an inverted beacon-filter setting bug in my code, though that also should have been fixed in the previous firmware I sent you.
I might have had some other problem in that older firmware, however.
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 11 lines
Can you please try this firmware:
http://www.candelatech.com/downloads/firmware-2-community-scan-X.bin
I have verified that it works fine for me when connecting to an AP on a DFS channel. It should have the bridging fix as well.
There was an inverted beacon-filter setting bug in my code, though that also should have been fixed in the previous firmware I sent you.
I might have had some other problem in that older firmware, however.
Thank you, your new firmware work fine with DFS channel and promiscuous mode. But there is a small bug, with the firmware 10.1 my station can associate with AP directly after running wpa_supplicant. Your firmware had this:
wlan0: direct probe to (@ mac) (try 1/3)
wlan0: direct probe to (@ mac) (try 2/3)
wlan0: direct probe to (@ mac) (try 3/3)
and I have to run "iw wlan0 scan" to detect the network again and connect to it. I've tested it with different channels DFS for 2 version of firmware (yours and 10.1) so I'm quite sure about it.
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 12 lines · Vu Hai NGUYEN
Quoted 11 lines
Can you please try this firmware:
http://www.candelatech.com/downloads/firmware-2-community-scan-X.bin
I have verified that it works fine for me when connecting to an AP on a DFS channel. It should have the bridging fix as well.
There was an inverted beacon-filter setting bug in my code, though that also should have been fixed in the previous firmware I sent you.
I might have had some other problem in that older firmware, however.
Quoted 9 lines
Thank you, your new firmware work fine with DFS channel and promiscuous mode. But there is a small bug, with the firmware 10.1 my station can associate with AP directly after running
wpa_supplicant. Your firmware had this:
wlan0: direct probe to (@ mac) (try 1/3)
wlan0: direct probe to (@ mac) (try 2/3)
wlan0: direct probe to (@ mac) (try 3/3)
and I have to run "iw wlan0 scan" to detect the network again and connect to it. I've tested it with different channels DFS for 2 version of firmware (yours and 10.1) so I'm quite sure about it.
Does this problem happen only with DFS, or do you see it on other channels as well?
I can build another set of firmwares for bisecting later today.
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : ath10k: firmware crash in station mode & problem DFS
In reply to Vu Hai NGUYENQuoted 12 lines · Vu Hai NGUYEN
Quoted 11 lines
Can you please try this firmware:
http://www.candelatech.com/downloads/firmware-2-community-scan-X.bin
I have verified that it works fine for me when connecting to an AP on a DFS channel. It should have the bridging fix as well.
There was an inverted beacon-filter setting bug in my code, though that also should have been fixed in the previous firmware I sent you.
I might have had some other problem in that older firmware, however.
Quoted 9 lines
Thank you, your new firmware work fine with DFS channel and promiscuous mode. But there is a small bug, with the firmware 10.1 my station can associate with AP directly after running
wpa_supplicant. Your firmware had this:
wlan0: direct probe to (@ mac) (try 1/3)
wlan0: direct probe to (@ mac) (try 2/3)
wlan0: direct probe to (@ mac) (try 3/3)
and I have to run "iw wlan0 scan" to detect the network again and connect to it. I've tested it with different channels DFS for 2 version of firmware (yours and 10.1) so I'm quite sure about it.
I put a new series of patches (one build for every commit in my tree) here. This has the scan fix in place (at around build 70 or so) so hopefully a bisect will work OK for you.
http://www.candelatech.com/downloads/ath10k-fw-all-images/
If you bisect the problem, please let me know the results and I'll try to track down the problem.
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : ath10k: firmware crash in station mode & problem DFS
Quoted 8 lines
I put a new series of patches (one build for every commit in my tree) here. This has the scan fix in place (at around build 70 or so) so hopefully a bisect will work OK for you.
http://www.candelatech.com/downloads/ath10k-fw-all-images/
If you bisect the problem, please let me know the results and I'll try to track down the problem.
Thanks, the different is between the 61th and 62th commit. I have to type "iw wlan0 scan" for the 62th commit firmware to connect after running wpa_supp. They all had:
wlan0: CTRL-EVENT-SCAN-STARTED
wlan0: SME: Trying to authenticate with 04:f0:21:0e:38:be (SSID='ath10k' freq=5280 MHz)
wlan0: authenticate with 04:f0:21:0e:38:be
wlan0: direct probe to 04:f0:21:0e:38:be (try 1/3)
wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3)
wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3)
wlan0: authentication with 04:f0:21:0e:38:be timed out
But the first firmware continue to do this:
wlan0: SME: Trying to authenticate with 04:f0:21:0e:38:be (SSID='ath10k' freq=5280 MHz)
wlan0: authenticate with 04:f0:21:0e:38:be
wlan0: authenticated
wlan0: Trying to associate with 04:f0:21:0e:38:be (try 1/3)
wlan0: associate with 04:f0:21:0e:38:be
wlan0: associated
While the second one keeps saying:
wlan0: CTRL-EVENT-SCAN-STARTED
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : ath10k: firmware crash in station mode & problem DFS
Quoted 9 lines · Vu Hai NGUYEN
Quoted 8 lines
I put a new series of patches (one build for every commit in my tree) here. This has the scan fix in place (at around build 70 or so) so hopefully a bisect will work OK for you.
http://www.candelatech.com/downloads/ath10k-fw-all-images/
If you bisect the problem, please let me know the results and I'll try to track down the problem.
Quoted 9 lines
Thanks, the different is between the 61th and 62th commit. I have to type "iw wlan0 scan" for the 62th commit firmware to connect after running
wpa_supp. They all had:
wlan0: CTRL-EVENT-SCAN-STARTED
wlan0: SME: Trying to authenticate with 04:f0:21:0e:38:be (SSID='ath10k' freq=5280 MHz)
wlan0: authenticate with 04:f0:21:0e:38:be
wlan0: direct probe to 04:f0:21:0e:38:be (try 1/3)
wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3)
wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3)
wlan0: authentication with 04:f0:21:0e:38:be timed out
You see this with official firmware as well? Any idea why AP does not answer?
Quoted 10 lines
But the first firmware continue to do this:
wlan0: SME: Trying to authenticate with 04:f0:21:0e:38:be (SSID='ath10k' freq=5280 MHz)
wlan0: authenticate with 04:f0:21:0e:38:be
wlan0: authenticated
wlan0: Trying to associate with 04:f0:21:0e:38:be (try 1/3)
wlan0: associate with 04:f0:21:0e:38:be
wlan0: associatedWhile the second one keeps saying:
wlan0: CTRL-EVENT-SCAN-STARTED
I'll investigate the firmware change between 61 and 62, thanks for narrowing it down.
Also, do you see this same behaviour on non-DFS channels?
Thanks,
Ben
Quoted 15 lines
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Signature · 7 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : ath10k: firmware crash in station mode & problem DFS
In reply to Vu Hai NGUYENQuoted 9 lines · Vu Hai NGUYEN
Quoted 8 lines
I put a new series of patches (one build for every commit in my tree) here. This has the scan fix in place (at around build 70 or so) so hopefully a bisect will work OK for you.
http://www.candelatech.com/downloads/ath10k-fw-all-images/
If you bisect the problem, please let me know the results and I'll try to track down the problem.
Quoted 9 lines
Thanks, the different is between the 61th and 62th commit. I have to type "iw wlan0 scan" for the 62th commit firmware to connect after running
wpa_supp. They all had:
wlan0: CTRL-EVENT-SCAN-STARTED
wlan0: SME: Trying to authenticate with 04:f0:21:0e:38:be (SSID='ath10k' freq=5280 MHz)
wlan0: authenticate with 04:f0:21:0e:38:be
wlan0: direct probe to 04:f0:21:0e:38:be (try 1/3)
wlan0: direct probe to 04:f0:21:0e:38:be (try 2/3)
wlan0: direct probe to 04:f0:21:0e:38:be (try 3/3)
wlan0: authentication with 04:f0:21:0e:38:be timed out
Looks like my scan-on-operating-channel optimization patch is the problem. I have just disabled this until I have time to debug it in detail...
Here is a build of my full patch-set with that buggy patch reverted, please see if it works for you:
http://www.candelatech.com/downloads/firmware-2-community-scanfix.bin
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : ath10k: firmware crash in station mode & problem DFS
Quoted 1 line
Also, do you see this same behaviour on non-DFS channels?
No your firmware works normally on non-DFS channels.
Quoted 8 lines
Looks like my scan-on-operating-channel optimization patch is the problem. I have just disabled this until I have time to debug it in detail...
Here is a build of my full patch-set with that buggy patch reverted, please see if it works for you:
http://www.candelatech.com/downloads/firmware-2-community-scanfix.bin
Thanks, I just do the test with your new firmware, It works on DFS channels and promiscuous mode. If you update something for your patch, please feel free to ask me to do the test.
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : ath10k: firmware crash in station mode & problem DFS
Quoted 8 lines · Vu Hai NGUYEN
Quoted 1 line
Also, do you see this same behaviour on non-DFS channels?
No your firmware works normally on non-DFS channels.
Quoted 4 lines
Looks like my scan-on-operating-channel optimization patch is the problem. I have just disabled this until I have time to debug it in detail...
Quoted 7 lines
Quoted 4 lines
Here is a build of my full patch-set with that buggy patch reverted, please see if it works for you:
http://www.candelatech.com/downloads/firmware-2-community-scanfix.bin
Thanks, I just do the test with your new firmware, It works on DFS channels and promiscuous mode. If you update something for your patch, please feel free to ask me to do the test.
I uploaded the latest CT firmware builds with this fix last Friday. The 10.1.467-ct-006 should be basically the same as the -scanfix.bin that you tested earlier.
Please let me know if you see any additional problems.
Thanks,
Ben
Signature · 7 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : ath10k: firmware crash in station mode & problem DFS
Quoted 4 lines
I uploaded the latest CT firmware builds with this fix last Friday. The 10.1.467-ct-006 should be basically the same as the -scanfix.bin that you tested earlier.
Please let me know if you see any additional problems.
Ok I've tested this firmware:
http://www.candelatech.com/downloads/firmware-2-ct-community-6.bin
I can use it for my STA in promiscuous mode and connect to my AP on channels DFS, Sometimes I get this message "wlan0: received packet with own address as source address". I'm not sure that it is your firmware issue or because of my network configuration. I'll try to figure it out and report to you if it relates to your firmware.
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Warning message in bridge mode
I get this warning message when doing my test with iperf in my AP:
br0: received packet on wlan0.sta1 with own address as source address
My STA is set up in bridge network (promiscuous mode) and using the firmware of CT.
http://www.candelatech.com/downloads/firmware-2-ct-community-6.bin
When my STA is associated successfully with my AP, the interface "wlan0.sta1" is created in my AP. And I have this config:
br0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
eth0 Link encap:Ethernet HWaddr 00:10:02:0F:C5:05
wlan0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
wlan0.sta1 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
I think that the warning message is because my interface br0 and wlan0.sta1 have the same mac address. And it decrease the performance of the rate (I get higher rate with iperf when my STA is set up in router network (not enter promiscuous mode). I can not do the test with the official firmware cause it crashed in promiscuous mode.
So I wonder that if anyone get the same issue like me?
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
I can use it for my STA in promiscuous mode and connect to my AP on channels DFS, Sometimes I get this message "wlan0: received packet with own address as source address". I'm not sure that it is your firmware issue or because of my network configuration. I'll try to figure it out and report to you if it relates to your firmware.
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: Warning message in bridge mode
Quoted 12 lines · Vu Hai NGUYEN
I get this warning message when doing my test with iperf in my AP:
br0: received packet on wlan0.sta1 with own address as source addressMy STA is set up in bridge network (promiscuous mode) and using the firmware of CT.
http://www.candelatech.com/downloads/firmware-2-ct-community-6.bin
When my STA is associated successfully with my AP, the interface "wlan0.sta1" is created in my AP. And I have this config:
br0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
eth0 Link encap:Ethernet HWaddr 00:10:02:0F:C5:05
wlan0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
wlan0.sta1 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
Quoted 5 lines
I think that the warning message is because my interface br0 and wlan0.sta1 have the same mac address. And it decrease the performance of the rate (I get higher rate with iperf when my STA is set up in router network (not enter promiscuous mode). I can not do the test with the official firmware cause it crashed in promiscuous mode.
So I wonder that if anyone get the same issue like me?
Why do you have the same MAC for wlan0 and wlan0.sta1? What are those interfaces exactly? It is normal for the bridge to have same MAC as one of the interfaces it contains.
Quoted 4 lines
I can use it for my STA in promiscuous mode and connect to my AP on channels DFS, Sometimes I get this message "wlan0: received packet with own address as source address". I'm not sure that it is your firmware issue or because of my network configuration. I'll try to figure it out and report to you if it relates to your firmware.
I doubt my firmware has any impact on this particular problem.
Thanks,
Ben
Quoted 14 lines
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: Warning message in bridge mode
Hi,
No dia 23/06/2014, às 22:33, Ben Greear <[email protected]> escreveu:
Quoted 3 lines · Vu Hai NGUYEN
Quoted 2 lines
I get this warning message when doing my test with iperf in my AP:
br0: received packet on wlan0.sta1 with own address as source address
That message is common in other scenarios.
I also have this messages when in layer 2 mesh ( batman-adv)
Quoted 16 lines
Quoted 10 lines
My STA is set up in bridge network (promiscuous mode) and using the firmware of CT.
http://www.candelatech.com/downloads/firmware-2-ct-community-6.bin
When my STA is associated successfully with my AP, the interface "wlan0.sta1" is created in my AP. And I have this config:
br0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
eth0 Link encap:Ethernet HWaddr 00:10:02:0F:C5:05
wlan0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
wlan0.sta1 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6Quoted 5 lines
I think that the warning message is because my interface br0 and wlan0.sta1 have the same mac address. And it decrease the performance of the rate (I get higher rate with iperf when my STA is set up in router network (not enter promiscuous mode). I can not do the test with the official firmware cause it crashed in promiscuous mode.
So I wonder that if anyone get the same issue like me?
Quoted 3 lines
Why do you have the same MAC for wlan0 and wlan0.sta1? What are those interfaces exactly? It is normal for the bridge to have same MAC as one of the interfaces it contains.
I think he is using WDS mode.
For each station connected to the AP a new sub interface is added: wlan0.sta1, wlan0.sta2 ... All sub interfaces share the MAC address.
At least that's what happens with ath9k.
Quoted 7 lines
Quoted 5 lines
I can use it for my STA in promiscuous mode and connect to my AP on channels DFS, Sometimes I get this message "wlan0: received packet with own address as source address". I'm not sure that it is your firmware issue or because of my network configuration. I'll try to figure it out and report to you if it relates to your firmware.
I doubt my firmware has any impact on this particular problem.
Me too.
Bruno
Quoted 12 lines
Thanks,
BenQuoted 9 lines
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
Quoted 16 lines
Quoted 5 lines
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10kSignature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
RE : Warning message in bridge mode
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
I get this warning message when doing my test with iperf in my AP:
br0: received packet on wlan0.sta1 with own address as source addressThat message is common in other scenarios.
I also have this messages when in layer 2 mesh ( batman-adv)
So I don't have to worry about this warning???
Quoted 15 lines
Quoted 14 lines
Quoted 14 lines
My STA is set up in bridge network (promiscuous mode) and using the firmware of CT.
http://www.candelatech.com/downloads/firmware-2-ct-community-6.bin
When my STA is associated successfully with my AP, the interface "wlan0.sta1" is created in my AP. And I have this config:
br0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
eth0 Link encap:Ethernet HWaddr 00:10:02:0F:C5:05
wlan0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
wlan0.sta1 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6I think that the warning message is because my interface br0 and wlan0.sta1 have the same mac address. And it decrease the performance of the rate (I get higher rate with iperf when my STA is set up in router network (not enter promiscuous mode). I can not do the test with the official firmware cause it crashed in promiscuous mode.
So I wonder that if anyone get the same issue like me?
Quoted 7 lines
Quoted 3 lines
Why do you have the same MAC for wlan0 and wlan0.sta1? What are those interfaces exactly? It is normal for the bridge to have same MAC as one of the interfaces it contains.
I think he is using WDS mode.
For each station connected to the AP a new sub interface is added: wlan0.sta1, wlan0.sta2 ... All sub interfaces share the MAC address.
At least that's what happens with ath9k.
Yes I'm using WDS mode, set up from command "iw set 4addr on" and in my hostapd config I also have wds_sta=1. The sub interface is created only if my STA is set up is bridge network, if I use my STA as a router there is no sub interface created, my STA associate with AP directly on interface wlan0.
Quoted 7 lines
Quoted 6 lines
Quoted 4 lines
I can use it for my STA in promiscuous mode and connect to my AP on channels DFS, Sometimes I get this message "wlan0: received packet with own address as source address". I'm not sure that it is your firmware issue or because of my network configuration. I'll try to figure it out and report to you if it relates to your firmware.
I doubt my firmware has any impact on this particular problem.
Me too.
I was wrong, the only warning msg is "br0: received packet on wlan0.sta1 with own address as source address". And I have another question: When doing test with iperf, I always have rate from AP to STA higher than STA to AP (380Mbps vs 240 Mbps).This is normal too right? Cause before you told me that when you did the test with your own traffic generator, you can get 500+Mbps download, and about 400Mbps upload.
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : Warning message in bridge mode
Quoted 4 lines · Vu Hai NGUYEN
I was wrong, the only warning msg is "br0: received packet on wlan0.sta1 with own address as source address". And I have another question: When doing test with iperf, I always have rate from AP to STA higher than STA to AP (380Mbps vs 240 Mbps).This is normal too right? Cause before you told me that when you did the test with your own trafficgenerator, you can get 500+Mbps download, and about 400Mbps upload.
We have done some tests recently on E5 3.7Ghz systems (ie, top-end-ish server systems) that can push 800+Mbps UDP, but can't recall if that is upload or download.
We need to re-run tests and publish the info.
Looks like host CPU is very important to higher-speeds with ath10k. I did a perf top months ago, and there was bad contention on a spinlock or two in ath10k driver, so that is probably much of the performance problems we see.
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : Warning message in bridge mode
Hi Ben,
Can you create a firmware that is the same as 10.1.467-2-1 but include your fix for promiscuous mode? I would like to do the test of rate in bridge network to see if the performance is better or not. But as your firmware contain other commit that might make the rate slower so I would like to ask you could create this version of firmware.
Thanks in advance,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
________________________________________
De : Ben Greear [[email protected]]
Date d'envoi : mardi 24 juin 2014 17:10
À : Vu Hai NGUYEN; Bruno Antunes
Cc : Patrick CARNEIRO RODRIGUEZ; [email protected] Objet : Re: RE : Warning message in bridge mode
Quoted 4 lines · Vu Hai NGUYEN
I was wrong, the only warning msg is "br0: received packet on wlan0.sta1 with own address as source address". And I have another question: When doing test with iperf, I always have rate from AP to STA higher than STA to AP (380Mbps vs 240 Mbps).This is normal too right? Cause before you told me that when you did the test with your own trafficgenerator, you can get 500+Mbps download, and about 400Mbps upload.
We have done some tests recently on E5 3.7Ghz systems (ie, top-end-ish server systems) that can push 800+Mbps UDP, but can't recall if that is upload or download.
We need to re-run tests and publish the info.
Looks like host CPU is very important to higher-speeds with ath10k. I did a perf top months ago, and there was bad contention on a spinlock or two in ath10k driver, so that is probably much of the performance problems we see.
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : Warning message in bridge mode
Quoted 5 lines · Vu Hai NGUYEN
Hi Ben,
Can you create a firmware that is the same as 10.1.467-2-1 but include your fix for promiscuous mode? I would like to do the test of rate in bridge network to see if the performance is better or not. But as your firmware contain other commit that might make the rate slower so I would like to ask you could create this version of firmware.
It would not be easy for me to do that. While you found a single patch that fixed the crash for you, I believe it is also dependent on many patches that came before that one as well.
For your throughput tests, are you using UDP or TCP? You might try TCP in case you are hitting the same packet-reordering issue reported in another email thread.
At least for standard operation (ie, no software-crypt), I doubt my changes to the firmware had any significant impact on performance or throughput.
Thanks,
Ben
Quoted 38 lines
Thanks in advance,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE________________________________________
De : Ben Greear [[email protected]]
Date d'envoi : mardi 24 juin 2014 17:10
À : Vu Hai NGUYEN; Bruno Antunes
Cc : Patrick CARNEIRO RODRIGUEZ; [email protected] Objet : Re: RE : Warning message in bridge modeQuoted 4 lines · Vu Hai NGUYEN
I was wrong, the only warning msg is "br0: received packet on wlan0.sta1 with own address as source address". And I have another question: When doing test with iperf, I always have rate from AP to STA higher than STA to AP (380Mbps vs 240 Mbps).This is normal too right? Cause before you told me that when you did the test with your own trafficgenerator, you can get 500+Mbps download, and about 400Mbps upload.
We have done some tests recently on E5 3.7Ghz systems (ie, top-end-ish server systems) that can push 800+Mbps UDP, but can't recall if that is upload or download.
We need to re-run tests and publish the info.
Looks like host CPU is very important to higher-speeds with ath10k. I did a perf top months ago, and there was bad contention on a spinlock or two in ath10k driver, so that is probably much of the performance problems we see.
Thanks,
Ben--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : Warning message in bridge mode
Quoted 7 lines
It would not be easy for me to do that. While you found a single patch that fixed the crash for you, I believe it is also dependent on many patches that came before that one as well.
For your throughput tests, are you using UDP or TCP? You might try TCP in case you are hitting the same packet-reordering issue reported in another email thread.
But as you and Bruno Antunes said before the warning message is normal and I can ignore it? I've tested with both TCP and UDP using iperf. I'm testing TCP with option -w256K and 10 stream (-P10) With Open Authentication in 802.11ac VHT80
UDP Download (1% packet lost) : 565 Mbps
UDP Upload (1% packet lost): 320 Mbps
TCP Download: 380 Mbps
TCP Upload: 260 Mbps
Quoted 3 lines
At least for standard operation (ie, no software-crypt), I doubt my changes to the firmware had any significant impact on performance or throughput.
You're right, If I do not enter promiscuous mode, I get the same rate when doing test with your firmware and the official firmware. But if I use your firmware for my STA in promiscuous mode, the rate is a little bit slower when doing test (about 20 Mbps less than non promiscuous mode)
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : Warning message in bridge mode
Quoted 16 lines · Vu Hai NGUYEN
Quoted 7 lines
It would not be easy for me to do that. While you found a single patch that fixed the crash for you, I believe it is also dependent on many patches that came before that one as well.
For your throughput tests, are you using UDP or TCP? You might try TCP in case you are hitting the same packet-reordering issue reported in another email thread.
But as you and Bruno Antunes said before the warning message is normal and I can ignore it? I've tested with both TCP and UDP using iperf. I'm testing TCP with option -w256K and 10 stream (-P10) With Open Authentication in 802.11ac VHT80
UDP Download (1% packet lost) : 565 Mbps
UDP Upload (1% packet lost): 320 Mbps
TCP Download: 380 Mbps
TCP Upload: 260 Mbps
Quoted 6 lines
Quoted 3 lines
At least for standard operation (ie, no software-crypt), I doubt my changes to the firmware had any significant impact on performance or throughput.
You're right, If I do not enter promiscuous mode, I get the same rate when doing test with your firmware and the official firmware. But if I use your firmware for my STA in promiscuous mode, the rate is a little bit slower when doing test (about 20 Mbps less than non promiscuous mode)
Can you run 'perf top' or similar on your system to see if the kernel is doing more work in promisc mode? Promisc (monitor) mode is going to disable some firmware packet cooking, so I think you may end up doing extra work in the driver.
Thanks,
Ben
Signature · 7 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
RE : Warning message in bridge mode
Quoted 3 lines
Can you run 'perf top' or similar on your system to see if the kernel is doing more work in promisc mode? Promisc (monitor) mode is going to disable some firmware packet cooking, so I think you may end up doing extra work in the driver.
Thanks, I ran "top" on my system and saw the main different was the task "ksoftirqd". I google it and they told that this can happen when a high speed network card receives a very large number of packets in a short time frame. Our processor is almost exhausted in both case (only 2 and 5% idle). This may be reason our rate was limited when doing test too? You can find in the attached file 2 result when I run top on my system :D
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
Mem: 60800K used, 446288K free, 0K shrd, 0K buff, 28840K cached
CPU: 1% usr 6% sys 0% nic 5% idle 0% io 0% irq 86% sirq
Load average: 1.21 0.92 0.81 1/64 16146
PID PPID USER STAT VSZ %MEM %CPU COMMAND
3 2 root RW 0 0% 14% [ksoftirqd/0]
13735 2 root SW 0 0% 10% [kworker/u:1]
899 1 root S 2588 1% 3% monitor
733 731 root S 2492 0% 2% /usr/bin/principal -production
15723 754 root R 2384 0% 1% top
749 747 root S 2984 1% 1% /usr/sbin/lighttpd -D -f /etc/lighttpd
909 1 root S 2140 0% 1% jdb
18638 2 root SW 0 0% 1% [kworker/u:0]
756 1 root S 2264 0% 0% /sbin/klogd -n
915 1 root S 2132 0% 0% confsftp
728 726 root S 1776 0% 0% /usr/bin/update 2
15291 2 root SW 0 0% 0% [kworker/0:0]
15537 1 root S 5384 1% 0% wpa_supplicant -Dnl80211 -iwlan0 -c /e
723 1 root S 3800 1% 0% vsftpd
754 1 root S 2384 0% 0% -sh
15515 1 root S 2316 0% 0% bird -c /etc/bird.conf
1 0 root S 2264 0% 0% init
755 1 root S 2264 0% 0% /sbin/syslogd -n -m 0
622 1 root S 2264 0% 0% /usr/sbin/dropbearMem: 60440K used, 446648K free, 0K shrd, 0K buff, 28812K cached
CPU: 1% usr 2% sys 0% nic 2% idle 0% io 0% irq 92% sirq
Load average: 1.87 0.96 0.75 5/63 11101
PID PPID USER STAT VSZ %MEM %CPU COMMAND
3 2 root RW 0 0% 40% [ksoftirqd/0]
18638 2 root RW 0 0% 16% [kworker/u:0]
749 747 root S 2984 1% 4% /usr/sbin/lighttpd -D -f /etc/lighttpd
899 1 root R 2588 1% 4% monitor
372 2 root SW 0 0% 3% [kworker/u:2]
909 1 root S 2140 0% 3% jdb
756 1 root S 2264 0% 1% /sbin/klogd -n
915 1 root S 2132 0% 1% confsftp
733 731 root S 2492 0% 1% /usr/bin/principal -production
10282 754 root R 2384 0% 0% top
755 1 root S 2264 0% 0% /sbin/syslogd -n -m 0
728 726 root S 1776 0% 0% /usr/bin/update 2
9725 1 root S 5384 1% 0% wpa_supplicant -Dnl80211 -iwlan0 -bbr0
723 1 root S 3800 1% 0% vsftpd
754 1 root S 2384 0% 0% -sh
1 0 root S 2264 0% 0% init
622 1 root S 2264 0% 0% /usr/sbin/dropbear
726 1 root S 2132 0% 0% runsv /var/service/update
731 1 root S 2132 0% 0% runsv /var/service/principal
747 1 root S 2132 0% 0% runsv /var/service/lighttpd_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to Vu Hai NGUYENQuoted 9 lines · Vu Hai NGUYEN
Quoted 9 lines
Ok, the difference must be changes I made to the scanning state machine. That patch was fairly big, and did several different things. I have split it up into 4 separate patches to try to narrow down where the problem was introduced.
Can you try these firmware images in order and let me know the first that fails to do DFS properly? The scan-1 should be white-space and debugging only, so hopefully it works.
Quoted 8 lines
Quoted 6 lines
firmware-2-community-scan1.bin
firmware-2-community-scan2.bin
firmware-2-community-scan3.bin
firmware-2-community-scan4.binThank you, I did the test, the first one and second one (scan 1 & 2) can work with DFS, the last 2 cann't.
Can you please see if this firmware is any better for the DFS issue?
http://www.candelatech.com/downloads/firmware-2-community-scan3-a.bin
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to Vu Hai NGUYENQuoted 10 lines · Vu Hai NGUYEN
Quoted 5 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.cProblem solved. I looked in the
driver_nl80211.cand found thatuse_monitorrelied on "poll_command_supported" and "data_tx_status". I printed these 2 parameters and saw that data_tx_status=0, it depends onNL80211_FEATURE_SK_TX_STATUSand this parameter was affected to the flags ofwiphy->features, defined in /net/mac80211/main.c.I find this parameter was set = 0 in /backport-include/linux/nl80211.h That's why montior mode was forced to used with AP mode. I set that parameter = 1 and no more monitor interface in AP mode, my AP work in DFS mode now.
I'll write a mail to backport mail list to ask them why do they set that parameter=0.
OK, btw I see there is a bug when sending frame using monitor interface in mac80211 in ieee80211_monitor_start_xmit() - because of that you have this problem. Seems for old kernel < 3.3.0 monitor interface is required.
I will fix mac80211 issue when monitor is used.
Quoted 12 lines
I get another question: There a conflict of information about HT40+ and HT40- in hostapd and
ht40allow_map(fromdebugfs). In the hostapd.conf example file:
# Note: There are limits on which channels can be used with HT40- and# HT40+. Following table shows the channels that may be available for # HT40- and HT40+ use per IEEE 802.11n Annex J: # freq HT40- HT40+ # 5 GHz 40,48,56,64 36,44,52,60It means the channel 48 is not available in HT40+. But the info from
ht40allow_mapsaid that channel 5240 Mhz (ie 48) is available in both 40+ and 40-. If I set ht-capab=[HT40+] and channel=48, hostapd can not setup AP mode.
And the channel 140 can not be set neither in bandwidth 40+ nor 40- even my "iw list' show that channel 140 is available.
Is there a problem withht40allow_map?
Seems ht40allow_map don't care about 80211n standard, just check neighbor channels and set -/+. So, hostapd play with this correctly. channel 140 as I remember correctly is disabled for all atheros cards. I think Luis write about it.
BR
Janusz
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 11 lines · Janusz Dziedzic
Quoted 10 lines · Vu Hai NGUYEN
Quoted 5 lines
This is set base on what driver/mac80211/cfg80211 report - function
wpa_driver_nl80211_capa().
With ath10k and new mac80211 this should be never set. So, seems you still have old/wrong modules and system build/configuration problem? Checkcfg80211.ko/mac80211.ko... and/or add some prints todriver_nl80211.cProblem solved. I looked in the
driver_nl80211.cand found thatuse_monitorrelied on "poll_command_supported" and "data_tx_status". I printed these 2 parameters and saw that data_tx_status=0, it depends onNL80211_FEATURE_SK_TX_STATUSand this parameter was affected to the flags ofwiphy->features, defined in /net/mac80211/main.c.I find this parameter was set = 0 in /backport-include/linux/nl80211.h That's why montior mode was forced to used with AP mode. I set that parameter = 1 and no more monitor interface in AP mode, my AP work in DFS mode now.
I'll write a mail to backport mail list to ask them why do they set that parameter=0.
Quoted 5 lines
OK, btw I see there is a bug when sending frame using monitor interface in mac80211 in
ieee80211_monitor_start_xmit()- because of that you have this problem. Seems for old kernel < 3.3.0 monitor interface is required.
I will fix mac80211 issue when monitor is used.
Please remove your hack (use_monitor again) and check attached patch.
BR
Janusz
Quoted 13 lines
Quoted 4 lines
I get another question: There a conflict of information about HT40+ and HT40- in hostapd and
ht40allow_map(fromdebugfs). In the hostapd.conf example file:
# Note: There are limits on which channels can be used with HT40- andQuoted 9 lines
# HT40+. Following table shows the channels that may be available for # HT40- and HT40+ use per IEEE 802.11n Annex J: # freq HT40- HT40+ # 5 GHz 40,48,56,64 36,44,52,60It means the channel 48 is not available in HT40+. But the info from
ht40allow_mapsaid that channel 5240 Mhz (ie 48) is available in both 40+ and 40-. If I set ht-capab=[HT40+] and channel=48, hostapd can not setup AP mode.
And the channel 140 can not be set neither in bandwidth 40+ nor 40- even my "iw list' show that channel 140 is available.
Is there a problem withht40allow_map?
Quoted 7 lines
Seems
ht40allow_mapdon't care about 80211n standard, just check neighbor channels and set -/+. So, hostapd play with this correctly. channel 140 as I remember correctly is disabled for all atheros cards. I think Luis write about it.BR
Janusz
From 4d0127bff5374486aac960d175b545d682ea20d6 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <[email protected]>
Date: Wed, 28 May 2014 20:34:10 +0200
Subject: [PATCH] mac80211: allow tx via monitor iface when DFS
Allow send tx frames using monitor interface
when DFS chandef and we pass CAC (beaconing
allowed).
--- net/mac80211/tx.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
net/mac80211/tx.c +6 -5
@@ -1618,12 +1618,12 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, {struct ieee80211_local *local =wdev_priv (dev->ieee80211_ptr);struct ieee80211_chanctx_conf *chanctx_conf; -struct ieee80211_channel *chan;struct ieee80211_radiotap_header *prthdr = (struct ieee80211_radiotap_header *)skb->data;struct ieee80211_tx_info *info =IEEE80211_SKB_CB (skb);struct ieee80211_hdr *hdr;struct ieee80211_sub_if_data *tmp_sdata, *sdata; +struct cfg80211_chan_def chandef;u16 len_rthdr;int hdrlen;
@@ -1721,9 +1721,9 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, }if (chanctx_conf) - chan = chanctx_conf->def.chan; + chandef = chanctx_conf->def;else if (!local->use_chanctx) - chan = local->_oper_chandef.chan; + chandef = local->_oper_chandef;else goto fail_rcu;
@@ -1743,10 +1743,11 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,* radar detection by itself. We can do that later by adding a * monitor flag interfaces used for AP support. */ -if ((chan->flags & (IEEE80211_CHAN_NO_IR |IEEE80211_CHAN_RADAR ))) +if (!cfg80211_reg_can_beacon (local->hw.wiphy, &chandef, +NL80211_IFTYPE_AP )) goto fail_rcu; -ieee80211_xmit (sdata, skb, chan->band); +ieee80211_xmit (sdata, skb, chandef.chan->band);rcu_read_unlock ();return NETDEV_TX_OK ;
Signature · 1 line
1.7.9.5
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 7 lines
Quoted 5 lines
OK, btw I see there is a bug when sending frame using monitor interface in mac80211 in
ieee80211_monitor_start_xmit()- because of that you have this problem. Seems for old kernel < 3.3.0 monitor interface is required.
I will fix mac80211 issue when monitor is used.Please remove your hack (
use_monitoragain) and check attached patch.
Thanks for the the patch, I applied and it worked with a monitor interface in AP mode. But do you why does it require monitor interface for old kernel < 3.3.0?
Btw, I have a doubt, in both case (I means when I applied your patch or my hack), I have to run the command "iw wlan0 scan" (after running wpa_supplicant) on my station to connect if the channel employs DFS If the channel doesn't employs DFS, it can connect directly after running wpa_supplicant.
Quoted 12 lines
Quoted 12 lines
I get another question: There a conflict of information about HT40+ and HT40- in hostapd and
ht40allow_map(fromdebugfs). In the hostapd.conf example file:
# Note: There are limits on which channels can be used with HT40- and# HT40+. Following table shows the channels that may be available for # HT40- and HT40+ use per IEEE 802.11n Annex J: # freq HT40- HT40+ # 5 GHz 40,48,56,64 36,44,52,60It means the channel 48 is not available in HT40+. But the info from
ht40allow_mapsaid that channel 5240 Mhz (ie 48) is available in both 40+ and 40-. If I set ht-capab=[HT40+] and channel=48, hostapd can not setup AP mode.
And the channel 140 can not be set neither in bandwidth 40+ nor 40- even my "iw list' show that channel 140 is available.
Is there a problem withht40allow_map?
Quoted 4 lines
Seems
ht40allow_mapdon't care about 80211n standard, just check neighbor channels and set -/+. So, hostapd play with this correctly. channel 140 as I remember correctly is disabled for all atheros cards. I think Luis write about it.
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Quoted 10 lines · Vu Hai NGUYEN
Quoted 7 lines
Quoted 5 lines
OK, btw I see there is a bug when sending frame using monitor interface in mac80211 in
ieee80211_monitor_start_xmit()- because of that you have this problem. Seems for old kernel < 3.3.0 monitor interface is required.
I will fix mac80211 issue when monitor is used.Please remove your hack (
use_monitoragain) and check attached patch.Thanks for the the patch, I applied and it worked with a monitor interface in AP mode. But do you why does it require monitor interface for old kernel < 3.3.0?
Seems < 3.3.0 tx_status is not reported correctly to user mode (or at all). This is not problem in case of probe responses while hostapd don't care about status in such case (your hack works). But action/null frames still need correct ACK and monitor iface for < 3.3.0.
Quoted 2 lines
Btw, I have a doubt, in both case (I means when I applied your patch or my hack), I have to run the command "iw wlan0 scan" (after running
wpa_supplicant) on my station to connect if the channel employs DFS If the channel doesn't employs DFS, it can connect directly after runningwpa_supplicant.
Seems you hit wpa_supplicant issue, which Jouni already fix, check this thread:
http://comments.gmane.org/gmane.linux.drivers.hostap/30454
BR
Janusz
Quoted 18 lines
Quoted 13 lines
Quoted 4 lines
I get another question: There a conflict of information about HT40+ and HT40- in hostapd and
ht40allow_map(fromdebugfs). In the hostapd.conf example file:
# Note: There are limits on which channels can be used with HT40- andQuoted 9 lines
# HT40+. Following table shows the channels that may be available for # HT40- and HT40+ use per IEEE 802.11n Annex J: # freq HT40- HT40+ # 5 GHz 40,48,56,64 36,44,52,60It means the channel 48 is not available in HT40+. But the info from
ht40allow_mapsaid that channel 5240 Mhz (ie 48) is available in both 40+ and 40-. If I set ht-capab=[HT40+] and channel=48, hostapd can not setup AP mode.
And the channel 140 can not be set neither in bandwidth 40+ nor 40- even my "iw list' show that channel 140 is available.
Is there a problem withht40allow_map?Quoted 4 lines
Seems
ht40allow_mapdon't care about 80211n standard, just check neighbor channels and set -/+. So, hostapd play with this correctly. channel 140 as I remember correctly is disabled for all atheros cards. I think Luis write about it.
Quoted 5 lines
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
In reply to Vu Hai NGUYENOn 22 May 2014 16:40, Vu Hai NGUYEN <[email protected]> wrote:
[...]
Quoted 1 line
Small question: If I use the firmware version 999, the frame of Probe Request from Station have Mac address source: SecureWo_12:34:56 and with the version 10.1.467-2.1 I get the true address mac, is this normal?
If memory serves right: if otp execution fails then mac address isn't configured. I think you have to use 10.1's otp to fix this. People have reported this issue before. See mailing list archives for details, please.
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : ath10k: firmware crash in station mode
In reply to Michal KaziorQuoted 6 lines
Quoted 3 lines
But I wonder if there will be any progress of the firmware in the future for promiscuous so that I can set up bridge mode?
Beats me. You should ask QCA about the future of ath10k firmware.
The best you can is use the firmware-2.bin_10.1.467.2-1. It should allow you to bridge even in STA mode.
---
Chun-Yeow
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
RE : RE : RE : ath10k: firmware crash in station mode
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
But I wonder if there will be any progress of the firmware in the future for promiscuous so that I can set up bridge mode?
Beats me. You should ask QCA about the future of ath10k firmware.
The best you can is use the firmware-2.bin_10.1.467.2-1. It should allow you to bridge even in STA mode.
I need to run the command "iw wlan0 set 4addr on" before setup bridge, else my bridge did not work. How did you bridge without that command?
Regards,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: RE : RE : RE : ath10k: firmware crash in station mode
Yes, you can do it with firmware 10.1.467.2-1 but not firmware 999.999.0.636.
---
Chun-Yeow
Quoted 13 lines · Vu Hai NGUYEN
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
But I wonder if there will be any progress of the firmware in the future for promiscuous so that I can set up bridge mode?
Beats me. You should ask QCA about the future of ath10k firmware.
The best you can is use the firmware-2.bin_10.1.467.2-1. It should allow you to bridge even in STA mode.
I need to run the command "iw wlan0 set 4addr on" before setup bridge, else my bridge did not work. How did you bridge without that command?
Quoted 6 lines
Regards,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
TR : ath10k: firmware crash in station mode
In reply to Vu Hai NGUYENQuoted 1 line
Yes, you can do it with firmware 10.1.467.2-1 but not firmware 999.999.0.636.
They all crashed, but the 999 crashed sooner (even before associated with the AP) , I've posted it the logs before for Michal Kazior. Here is my old email:
http://lists.infradead.org/pipermail/ath10k/2014-May/002042.html
Quoted 8 lines
Quoted 7 lines
This is NULL dereference in firmware. I suspect it's an incomplete driver-firmware setup (i.e. some commands weren't issued or were invalid).
Can you enable debug logs ( echo
0xffffff3f| sudo tee/sys/module/ath10k_core/parameters/debug_mask) before you try to associate and post logs, please? I'd like to see command sequence sent
to firmware before the crash happens.
Quoted 8 lines
I enable directly the
debug_maskwhen I load the module "modprobe ath10k_core.ko debug_mask=0x0xffffff3f" (I thought it is the same thing like what you do, right?). You can found de debug mess in the attached file (debug_10-1.txt). (line 3007: wlan0: associated and then in line 3008: ath10k: firmware crashed!)Quoted 3 lines
Can you post the crash logs (as noted above) when you try the 999 branch too, please? It seems 999 crashes sooner than 10.1. It might be helpful to see the different crash points.
Yes it crashed sooner. There are no wlan0: associated in the debug message. (attached file: debug_999.txt).
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
ath10k: htt target version 2.1
ath10k: pci tx item 0 paddr 0x12fd4460 len 48 n_items 1
ath10k: wmi pdev set param 30 value 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 20 n_items 1
ath10k: wmi pdev set param 10 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a41e60
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 20 n_items 1
ath10k: wmi pdev set param 1 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2daf180
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 20 n_items 1
ath10k: wmi pdev set param 2 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e669c0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 20 n_items 1
ath10k: wmi pdev set param 31 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2daf180
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66c00
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12e01860 len 784 n_items 1
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66cc0
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 36 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2daf180
ath10k: mac vdev create 0 (add interface) type 2 subtype 0
ath10k: WMI vdev create: id 0 type 2 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c0e60 len 32 n_items 1
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2daf180
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: vdev param 0 not supported by firmware
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66d80
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 1 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 2 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66e40
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 24 n_items 1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66f00
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66d80
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: mac vdev 0 slot_time 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e66d80
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: mac vdev 0 preamble 1n
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51160
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51160
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51220
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e510a0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51220
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e512e0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51220
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e513a0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51220
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51460
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51220
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51520
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51220
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0e60 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e515e0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac config channel 2412MHz flags 0x1a0 radar 0
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c0e60 len 20 n_items 1
ath10k: wmi pdev set param 4 value 40
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e516a0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fd4260 len 20 n_items 1
ath10k: mac vdev 0 psmode disable
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51220
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: wmi set powersave id 0x0 mode 0
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4260 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51760ADDRCONF(NETDEV_UP): wlan0: link is not readymv_eth_tool_get_settings is not supported on eth0
device eth0 entered promiscuous mode
device wlan0 entered promiscuous mode
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: WMI vdev create: id 1 type 4 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fd4860 len 32 n_items 1
ath10k: mac monitor vdev 1 created
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2daf600
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 2412, mode 1, ch_flags: 0x1, max_power: 40
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12fd4860 len 140 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51820
ath10k: htc ep 2 got 1 credits (total 2)
ath10k: htc rx completion ep 2 skb d2a41da0
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12cefa60 len 28 n_items 1
ath10k: mac monitor vdev 1 started
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a41da0
ath10k: mac monitor started
br0: port 1(eth0) entering forwarding state
br0: port 1(eth0) entering forwarding state
ath10k: pci hif send complete check
ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2e66a80
ath10k: htc rx completion ep 1 skb d2e518e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e519a0
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb d2a40680 len 16 rate_idx 0 vht_nss 0 freq 2412 band 0 flag 0x200000 fcs-err 0mic-err 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51a60
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a41ce0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41ce0 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2412 band 0 snr -60, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51b20
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51ca0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c2c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c380
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c5c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c8c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c980
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7ca40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cb00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cbc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cc80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cd40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7ce00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a660e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a661a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a663e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a664a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a666e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a667a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a669e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66aa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66b60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66c20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66ce0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66da0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66e60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66f20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a510c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf9c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf0c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf6c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf3c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf300
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdfb40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdfc00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdfcc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdfe40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdff00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdfd80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdfa80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51f00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51e40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51d80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51cc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51c00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51b40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51a80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a519c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a516c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a513c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e660c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e663c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e666c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e543c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e546c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e54780
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e540c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f0e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f1a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f3e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f4a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f6e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f7a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9f9e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9faa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9fb60
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9fc20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9fce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9fda0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9fe60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9ff20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f730c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73f00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73e40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73d80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73cc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73c00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73b40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73a80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f739c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73900
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f736c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f733c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f73240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a0c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8af00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8ae40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8ad80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8acc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8ac00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8ab40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8aa80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a9c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a6c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a3c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c8a240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5200
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb52c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb55c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb58c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5a40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5b00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5bc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5c80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5d40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5e00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb5ec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78ec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78e00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78d40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78c80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78bc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78b00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78a40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c788c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c785c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78440
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c782c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c78080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56ca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56b20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56a60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e569a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e568e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56760
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e566a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e565e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e563a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e562e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e56160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e560a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4ff00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4fe40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4fd80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4fcc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4fc00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4fb40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4fa80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f9c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f6c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f3c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e4f0c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49f20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49e60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49da0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49ce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49c20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49b60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49aa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e499e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e497a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e496e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e494a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e493e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e49260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e491a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e490e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43ec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43e00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43d40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43c80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43bc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43b00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43a40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e438c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e435c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43440
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e432c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e43080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7dee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7de20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7dd60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7dca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7dbe0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7db20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7da60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d9a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d8e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d760
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d6a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d5e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d3a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d2e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d0a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75f00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75e40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75d80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75cc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75c00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75b40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75a80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a759c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a756c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a753c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a75180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a750c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70f20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70e60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70da0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70ce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70c20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70b60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70aa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a709e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a707a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a706e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a704a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a703e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a70260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a701a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a700e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6aec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6ae00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6ad40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6ac80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6abc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6ab00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6aa40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a8c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a5c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a440
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a2c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a6a080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63ca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63b20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63a60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a639a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a638e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63760
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a636a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a635e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a633a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a632e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a63160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a630a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5df00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5de40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5dd80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5dcc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5dc00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5db40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5da80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d9c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d6c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d3c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a5d0c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3cf20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3ce60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3cda0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3cce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3cc20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3cb60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3caa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c9e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c7a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c6e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c4a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c3e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c1a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a3c0e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54ec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54e00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54d40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54c80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54bc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54b00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54a40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a548c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a545c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54440
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a542c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a54080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4dee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4de20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4dd60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4dca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4dbe0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4db20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4da60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d9a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d8e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d760
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d6a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d5e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d3a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: htt rx dropping due to zero-len
ath10k: wmi start scan
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12fd4060 len 196 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a4d5e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2a41c20
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 1 reason 3 freq 2412 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_STARTED
ath10k: htc rx completion ep 2 skb d2a41b60
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 4 reason 3 freq 2412 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_BSS_CHANNEL
ath10k: htc rx completion ep 2 skb d2a41aa0
ath10k: chan info err_code 0 freq 2412 cmd_flags 1 noise_floor -100 rx_clear_count 1360002 cycle_count 19361316
ath10k: htc rx completion ep 2 skb d2a419e0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a419e0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -40, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d2e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a41920
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41920 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -40, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d220
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d160
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a41860
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41860 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -43, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a417a0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a417a0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -43, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a4d0a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47f00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htc rx completion ep 2 skb d2a416e0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a416e0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -71, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47e40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a41620
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41620 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2412 band 0 snr -59, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47d80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a41560
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41560 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2412 band 0 snr -59, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47cc0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a414a0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a414a0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -72, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47c00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47b40
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb d2deaa40 len 10 rate_idx 0 vht_nss 0 freq 2412 band 0 flag 0x200000 fcs-err 0mic-err 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47a80
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb d2dea980 len 16 rate_idx 0 vht_nss 0 freq 2412 band 0 flag 0x200000 fcs-err 0mic-err 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a479c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htc rx completion ep 2 skb d2a413e0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a413e0 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2412 band 0 snr -59, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47900
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47840
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47780
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb d2dea680 len 16 rate_idx 0 vht_nss 0 freq 2412 band 0 flag 0x200000 fcs-err 0mic-err 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a476c0
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb d2dea5c0 len 16 rate_idx 0 vht_nss 0 freq 2412 band 0 flag 0x200000 fcs-err 0mic-err 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47600
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47540
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a41320
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41320 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2412 band 0 snr -59, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47480
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a473c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47300
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47240
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a47180
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a40740
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66840
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a41260
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41260 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2412 band 0 snr -60, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2daf780
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htc ep 2 got 1 credits (total 2)
ath10k: htc rx completion ep 2 skb d2a411a0
ath10k: wmi event debug mesg len 12
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2daf240
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a41e60
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e669c0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a410e0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a410e0 len 104 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -51, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66c00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htc rx completion ep 2 skb d2a40ec0
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 8 reason 3 freq 2457 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_FOREIGN_CHANNEL
ath10k: htc rx completion ep 2 skb d2a40e00
ath10k: chan info err_code 0 freq 2457 cmd_flags 0 noise_floor 0 rx_clear_count 5061573 cycle_count 88374723
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66cc0
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb d28979a0 len 16 rate_idx 0 vht_nss 0 freq 2457 band 0 flag 0x200000 fcs-err 0mic-err 0
ath10k: htc rx completion ep 2 skb d2a40d40
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a40d40 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2457 band 0 snr -14, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2daf180
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66e40
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a40c80
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a40c80 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -14, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a40bc0
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 4 reason 3 freq 2457 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_BSS_CHANNEL
ath10k: htc rx completion ep 2 skb d2a40b00
ath10k: chan info err_code 0 freq 2457 cmd_flags 1 noise_floor -102 rx_clear_count 5508592 cycle_count 92425077
ath10k: htc rx completion ep 2 skb d2a40a40
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 2 reason 0 freq 2457 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_COMPLETED
ath10k: SCAN_REASON_COMPLETED
wlan0: authenticate with 00:15:61:10:51:de
ath10k: mac config channel 2457MHz flags 0x190 radar 0
ath10k: mac config channel to 2457MHz (cf1 2447MHz cf2 0MHz width 40)
ath10k: wmi mgmt vdev down id 0x1
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c0660 len 16 n_items 1
ath10k: wmi vdev stop id 0x1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a40c80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12cefe60 len 16 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a40d40
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2a40980
ath10k: WMI_VDEV_STOPPED_EVENTID
ath10k: mac monitor vdev 1 stopped
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 2457, mode 7, ch_flags: 0x7, max_power: 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12cefe60 len 140 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a40980
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc rx completion ep 2 skb d2a408c0
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12cefe60 len 28 n_items 1
ath10k: mac monitor vdev 1 started
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a408c0
ath10k: mac config power 16
ath10k: wmi pdev set param 3 value 32
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12cefe60 len 20 n_items 1
ath10k: wmi pdev set param 4 value 32
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a408c0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c0660 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a40c80
ath10k: wmi vdev id 0x0 set param 3 value 100
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0660 len 24 n_items 1
ath10k: mac vdev 0 beacon_interval 100
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a40c80
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac vdev 0 create peer 00:15:61:10:51:de
ath10k: wmi peer create vdev_id 0 peer_addr 00:15:61:10:51:de
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c0660 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e51160
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e510a0
ath10k: htt rx, msg_type: 0x3
ath10k: htt peer map vdev 0 peer 00:15:61:10:51:de id 287
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e512e0
ath10k: htt rx, msg_type: 0x3
ath10k: htt peer map vdev 0 peer 00:15:61:10:51:de id 367
ath10k: mac vdev 0 start 00:15:61:10:51:de
ath10k: mac vdev 0 start center_freq 2457 phymode 11ng-ht40
ath10k: wmi vdev start id 0x0 flags: 0x0, freq 2457, mode 7, ch_flags: 0x7, max_power: 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12cefe60 len 140 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e512e0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51460
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a40800
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a40800 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51520
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2daf540
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2daf540 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -21, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e515e0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2daf300
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2daf300 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a41f20
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41f20 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -54, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51220
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2e51760
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2e51760 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -20, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2daf600
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66b40
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2dbaf20
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2dbaf20 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -48, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a4d5e0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a4d5e0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -48, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2daf0c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a40680
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a470c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51820
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e516a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2daf3c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2daf6c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2daf480
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e66a80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a40500
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a41da0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a40440
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e51be0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c380
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38ca0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c2c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38d60
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a41c20
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41c20 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -48, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c200
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38e20
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c140
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a41b60
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41b60 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2457 band 0 snr -20, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38ee0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c980
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f386a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htc rx completion ep 2 skb d2fa5f20
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2fa5f20 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -47, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c8c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38760
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c800
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2fa5620
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2fa5620 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38820
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7c740
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2fa54a0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2fa54a0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -52, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f388e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a28180
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a28180 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a660e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f380a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cec0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38160
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7ce00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38220
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cd40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f382e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cc80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f383a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cbc0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a54140
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a54140 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2457 band 0 snr -20, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38460
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7cb00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f38520
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2fa5260
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2fa5260 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -52, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7ca40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f385e0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2deac80
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2deac80 len 104 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -71, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66ce0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f223c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66c20
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f22480
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66b60
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f22540
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66aa0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f22600
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a669e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f226c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66920
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f22780
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a66860
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2deabc0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2deabc0 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2457 band 0 snr -20, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f22840
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a667a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2dea8c0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2dea8c0 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -20, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2f22900
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf300
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a542c0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a542c0 len 104 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -63, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c09306e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf180
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a280c0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a280c0 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c09307a0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf240
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0930860
ath10k: htt rx, msg_type: 0x1
ath10k: rx skb d2dd3d60 len 60 rate_idx 3 vht_nss 0 freq 2457 band 0 flag 0x200000 fcs-err 0mic-err 0
ath10k: htc rx completion ep 2 skb d2897d60
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2897d60 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -20, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf780
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2dead40
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2dead40 len 104 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -62, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0930920
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf3c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c09309e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2897a60
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2897a60 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2457 band 0 snr -20, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf480
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0930aa0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a40ec0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a40ec0 len 104 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -60, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf540
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0930b60
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cdf600
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d28979a0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d28979a0 len 220 ftype 00 stype 50
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0930c20
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51a80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a54080
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a54080 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c098f980
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51b40
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2897820
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2897820 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -20, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c098fa40
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2a40bc0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a40bc0 len 104 ftype 00 stype 40
ath10k: event mgmt rx freq 2457 band 0 snr -78, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a40b00
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a40b00 len 224 ftype 00 stype 80
ath10k: event mgmt rx freq 2457 band 0 snr -18, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51c00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2a40d40
ath10k: WMI_VDEV_START_RESP_EVENTID
wlan0: send auth to 00:15:61:10:51:de (try 1/3)
ath10k: wmi mgmt tx skb d2a40b00 len 56 ftype 00 stype b0
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c0060 len 68 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a40b00
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c098fb00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc rx completion ep 2 skb d2e66f00
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2e66f00 len 32 ftype 00 stype b0
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51cc0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
wlan0: authenticated
wlan0: associate with 00:15:61:10:51:de (try 1/3)
ath10k: wmi mgmt tx skb d2dd32e0 len 156 ftype 00 stype 00
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12cef860 len 168 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dd32e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51d80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c098fc80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htc ep 2 got 1 credits (total 2)
ath10k: htc rx completion ep 2 skb d2a41860
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2a41860 len 176 ftype 00 stype 10
ath10k: event mgmt rx freq 2457 band 0 snr -19, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a51e40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
wlan0: RX AssocResp from 00:15:61:10:51:de (capab=0x421 status=0 aid=1)
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dd3160
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0060 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a40bc0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dd3160
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c0060 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c098fd40
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dd3160
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2dd3160
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c098fe00
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12cef260 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cd0d80
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c098fe00
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12cef260 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 192
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdfa80
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c098fe00
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c098fe00
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac vdev 0 dtim_period 1
ath10k: wmi vdev id 0x0 set param 13 value 1
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: mac vdev 0 slot_time 2
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e663c0
ath10k: wmi vdev id 0x0 set param 7 value 2
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: mac vdev 0 preamble 2n
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2e663c0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: wmi vdev id 0x0 set param 8 value 2
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c0f17ca0
ath10k: mac ht peer 00:15:61:10:51:de mcs cnt 8 nss 1
ath10k: mac peer 00:15:61:10:51:de phymode 11ng-ht40
ath10k: wmi peer assoc vdev 0 addr 00:15:61:10:51:de (new)
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12a05860 len 368 n_items 1
ath10k: wmi vdev 0 peer 0x00:15:61:10:51:de set param 1 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c0f17ca0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12ae8e60 len 32 n_items 1
ath10k: mac vdev 0 up (associated) bssid 00:15:61:10:51:de aid 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c098fec0
ath10k: wmi mgmt vdev up id 0x0 assoc id 1 bssid 00:15:61:10:51:de
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12ae8e60 len 28 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb c098fec0
ath10k: htt tx alloc msdu_id 0
ath10k: htt tx flags0 37 flags1 25600 len 30 id 0 frags_paddr 12b28000, msdu_paddr 12ae8e74 vdev 0 tid 16
ath10k: pci tx item 0 paddr 0x12b28010 len 24 n_items 2
ath10k: pci tx item 1 paddr 0x12ae8e74 len 32 n_items 2
wlan0: associated
ath10k: firmware crashed!
ath10k: hardware name qca988x hw2.0 version 0x4100016c
ath10k: firmware version: 10.1.467.2-1
ath10k: target register Dump Location: 0x00401930
ath10k: target Register Dump
ath10k: [00]: 0x4100016C 0x00000000 0x009A123A 0x00000000
ath10k: [04]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [08]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [12]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [16]: 0x00000000 0x00000000 0x00000000 0x009A123A
ath10k: [20]: 0x00000000 0x00401930 0x00000000 0x00000000
ath10k: [24]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [28]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [32]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [36]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [40]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [44]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [48]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [52]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [56]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: mac monitor refs: promisc 0 monitor 0 cac 0
ath10k: wmi mgmt vdev down id 0x1ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
br0: port 2(wlan0) entering forwarding state
br0: port 2(wlan0) entering forwarding state
cfg80211: Calling CRDA for country: FR
ath10k: failed to put down monitor vdev 1: -11
ath10k: wmi vdev stop id 0x1
ath10k: failed to to request monitor vdev 1 stop: -11
eth0: no IPv6 routers present
br0: no IPv6 routers present
ath10k: htt target version 2.1
ath10k: pci tx item 0 paddr 0x009c4860 len 48 n_items 1
ath10k: wmi pdev set param 34 value 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7860 len 20 n_items 1
ath10k: wmi pdev set param 10 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c7df20
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7060 len 20 n_items 1
ath10k: wmi pdev set param 1 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39480
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7860 len 20 n_items 1
ath10k: wmi pdev set param 2 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1b40
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7060 len 20 n_items 1
ath10k: wmi pdev set param 35 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39480
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7860 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39240
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12dd4060 len 784 n_items 1
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1cc0
ath10k: pci tx item 0 paddr 0x12be7860 len 32 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39480
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac vdev create 0 (add interface) type 2 subtype 0
ath10k: WMI vdev create: id 0 type 2 subtype 0 macaddr 00:03:07:12:34:56
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 32 n_items 1
ath10k: wmi vdev id 0x0 set param 33 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: wmi vdev id 0x0 set param 48 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1cc0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 1 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1e40
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 2 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1f00
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 24 n_items 1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc0a0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 44 value 0
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: mac vdev 0 slot_time 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc160
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: mac vdev 0 preamble 1n
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc160
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc220
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc220
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc2e0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc3a0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc460
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc520
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc5e0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7860 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: mac config channel 2412MHz flags 0x1a0 radar 0
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7860 len 20 n_items 1
ath10k: wmi pdev set param 4 value 40
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cf1d80
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7060 len 20 n_items 1
ath10k: mac vdev 0 psmode disable
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc6a0
ath10k: wmi set powersave id 0x0 mode 0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2cdc6a0
ath10k: htc ep 2 got 2 credits (total 2)ADDRCONF(NETDEV_UP): wlan0: link is not ready
eth0: stopped
ath10k: mac vdev 0 delete (remove interface)
ath10k: WMI vdev delete id 0
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7060 len 16 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c830c0
ath10k: mac monitor refs: promisc 0 monitor 0 cac 0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7060 len 16 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c830c0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: boot suspend complete
ath10k: boot hif stop
ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2cf19c0
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot hif power down
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
Port 0: Link-down
eth0: link up
Port 1: Link-up, Full-duplex, Speed-100Mbps.
Port 2: Link-down
Port 3: Link-down
Port -1: Link-down
eth0: started
ath10k: boot hif power up
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot init ce src ring id 0 entries 16 base_addr c0f5d000
ath10k: boot ce dest ring id 1 entries 512 base_addr c0f5a000
ath10k: boot ce dest ring id 2 entries 32 base_addr d285f000
ath10k: boot init ce src ring id 3 entries 32 base_addr d285a000
ath10k: boot init ce src ring id 4 entries 4096 base_addr d2970000
ath10k: boot init ce src ring id 7 entries 2 base_addr d297f000
ath10k: boot ce dest ring id 7 entries 2 base_addr d297e000
ath10k: boot waiting target to initialise
ath10k: boot target indicator 0
ath10k: boot target indicator 0
ath10k: boot target indicator 0
ath10k: boot target indicator 2
ath10k: boot target initialised
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: boot upload otp to 0x1234 len 5402
ath10k: bmi fast download address 0x1234 buffer 0xe212e038 length 5402
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe212e038 length 5400
ath10k: bmi lz data buffer 0xd2b59d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi execute result 0x0
ath10k: boot otp execute result 0
ath10k: bmi fast download address 0x1234 buffer 0xe212f55c length 249093
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe212f55c length 249092
ath10k: bmi lz data buffer 0xd2b59d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: pci hif set callbacks
ath10k: pci hif get default pipe
ath10k: pci hif map service
ath10k: bmi done
ath10k: boot hif start
ath10k: Target ready! transmit resources: 2 size:1792
ath10k: pci hif map service
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: ath10k_htc_build_tx_ctrl_skb: skb d2a39840
ath10k: pci tx item 0 paddr 0x12b5a06c len 16 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 0 skb d2a39840
ath10k: HTC Service HTT Data connect response: status: 0x0, assigned ep: 0x1
ath10k: pci hif map service
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: ath10k_htc_build_tx_ctrl_skb: skb d2c01780
ath10k: pci tx item 0 paddr 0x129a246c len 16 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 0 skb d2c01780
ath10k: HTC Service WMI connect response: status: 0x0, assigned ep: 0x2
ath10k: pci hif map service
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: ath10k_htc_build_tx_ctrl_skb: skb d2a399c0
ath10k: HTC is using TX credit flow control
ath10k: pci tx item 0 paddr 0x129a206c len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 0 skb d2a399c0
ath10k: htc rx completion ep 2 skb d2d0b0c0
ath10k: wmi event service ready sw_ver 0x01000000 sw_ver1 0x0000027c abi_ver 3 phy_cap 0x00000003 ht_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000fffa sys_cap_info 0x00000000 mem_reqs 0 num_rf_chains 2
ath10k: boot wmi ready
ath10k: firmware 999.999.0.636 booted
ath10k: wmi init
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7c60 len 148 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c01180
ath10k: htc rx completion ep 2 skb d2d05f20
ath10k: wmi event ready sw_version 16777216 abi_version 3 mac_addr 00:03:07:12:34:56 status 0 skb->len 20 ev-sz 20
ath10k: pci tx item 0 paddr 0x12be7460 len 12 n_items 1
ath10k: pci hif send complete check
ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2d05f20
ath10k: htc rx completion ep 1 skb d2a39a80
ath10k: htt rx, msg_type: 0x0
ath10k: htt target version 2.1
ath10k: pci tx item 0 paddr 0x12be7460 len 48 n_items 1
ath10k: wmi pdev set param 34 value 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7660 len 20 n_items 1
ath10k: wmi pdev set param 10 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2d05f20
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c4460 len 20 n_items 1
ath10k: wmi pdev set param 1 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c0de60
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7660 len 20 n_items 1
ath10k: wmi pdev set param 2 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39b40
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c4460 len 20 n_items 1
ath10k: wmi pdev set param 35 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c0de60
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7660 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39c00
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12dd4860 len 784 n_items 1
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39cc0
ath10k: pci tx item 0 paddr 0x12be7660 len 32 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c0de60
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac vdev create 0 (add interface) type 2 subtype 0
ath10k: WMI vdev create: id 0 type 2 subtype 0 macaddr 00:03:07:12:34:56
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 32 n_items 1
ath10k: wmi vdev id 0x0 set param 33 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: wmi vdev id 0x0 set param 48 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39cc0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 1 value 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39e40
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 2 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39f00
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 24 n_items 1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a240a0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 44 value 0
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: mac vdev 0 slot_time 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a24160
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: mac vdev 0 preamble 1n
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a24160
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a24220
ath10k: wmi pdev set wmm params
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a24220
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a242e0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a243a0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a24460
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: wmi pdev set wmm params
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a24520
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 108 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 24 n_items 1
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a245e0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12be7660 len 24 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: mac config channel 2412MHz flags 0x1a0 radar 0
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7660 len 20 n_items 1
ath10k: wmi pdev set param 4 value 40
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a39d80
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009c4460 len 20 n_items 1
ath10k: mac vdev 0 psmode disable
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a246a0
ath10k: wmi set powersave id 0x0 mode 0
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009c4460 len 20 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2a246a0
ath10k: htc ep 2 got 2 credits (total 2)ADDRCONF(NETDEV_UP): wlan0: link is not readymv_eth_tool_get_settings is not supported on eth0
device eth0 entered promiscuous mode
device wlan0 entered promiscuous mode
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: WMI vdev create: id 1 type 4 subtype 0 macaddr 00:03:07:12:34:56
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x009a0260 len 32 n_items 1
ath10k: mac monitor vdev 1 created
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c016c0
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 2412, mode 1, ch_flags: 0x1, max_power: 40
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x009a0260 len 140 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c016c0
ath10k: htc ep 2 got 2 credits (total 2)
ath10k: htc rx completion ep 2 skb d2d05e60
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 00:03:07:12:34:56
ath10k: htc ep 2 consumed 1 credits (total 1)
ath10k: pci tx item 0 paddr 0x12c1c860 len 28 n_items 1
ath10k: mac monitor vdev 1 started
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2c0dce0
ath10k: mac monitor started
br0: port 1(eth0) entering forwarding state
br0: port 1(eth0) entering forwarding state
ath10k: pci hif send complete check
ath10k: ath10k_htc_notify_tx_completion: ep 1 skb d2a39a80
ath10k: htc rx completion ep 1 skb d2a249a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24a60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24b20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24ca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f080
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f2c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f5c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f8c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fa40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fb00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fbc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fc80
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fd40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fe00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d390e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d391a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d393e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d394a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d396e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d397a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d399e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39aa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39b60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39c20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39ce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39da0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39e60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d39f20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d240c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c0c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9cf00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9ce40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9cd80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9ccc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9cc00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9cb40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9ca80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c9c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c6c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c600
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c3c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c9c240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24f00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24e40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24d80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24cc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24c00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24b40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24a80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d249c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d246c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d243c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d24240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a393c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a390c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a396c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e590c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e596c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e593c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb c0e59600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc72c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc75c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc78c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7a40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7b00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7bc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7c80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7d40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7e00
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cc7ec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb10e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb11a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb13e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb14a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb16e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb17a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb19e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1aa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1b60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1c20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1ce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1da0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1e60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2cb1f20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6760
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc66a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc68e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc69a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6a60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6b20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6ca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc60a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc62e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc63a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc65e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2bc6820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a850e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a851a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a853e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a854a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a856e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a857a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a859e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85aa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85b60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85c20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85ce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85f20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85e60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a85da0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20ec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20e00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20d40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20c80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20bc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20b00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20a40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a208c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a205c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a202c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a20080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1aee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1ae20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1ad60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1aca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1abe0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1ab20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1aa60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a9a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a8e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a760
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a6a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a5e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a3a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a2e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a1a0a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14f00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14e40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14d80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14cc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14c00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14b40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14a80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a149c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a146c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a143c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a14180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a140c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0cf20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0ce60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0cda0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0cce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0cc20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0cb60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0caa0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c9e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c7a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c6e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c4a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c3e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c1a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0c0e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06ec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06e00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06d40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06c80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06bc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06b00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06a40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a068c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a065c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a062c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a06080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01ca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01b20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01a60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a019a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a018e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01760
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a016a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a015e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a013a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a012e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a01160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a010a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3bf00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3be40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3bd80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3bcc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3bc00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3bb40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3ba80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b9c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b6c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b3c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d3b0c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34f20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34e60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34da0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34ce0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34c20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34b60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34aa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d349e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d347a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d346e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d344a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d343e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d34260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d341a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d340e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2eec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2ee00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2ed40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2ec80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2ebc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2eb00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2ea40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e8c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e5c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e2c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d2e080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25ca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25b20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25a60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e259a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e258e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25760
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e256a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e255e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e253a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e252e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e25160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2e250a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25f00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25e40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25d80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25cc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25c00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25b40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25a80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d259c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d256c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d253c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d25180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d250c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1ef20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1ee60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1eda0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1ece0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1ec20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1eb60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1eaa0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e9e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e920
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e860
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e7a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e6e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e620
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e560
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e4a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e3e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e320
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e260
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e1a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d1e0e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18ec0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18e00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18d40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18c80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18bc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18b00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18a40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18980
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d188c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18800
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d185c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d182c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d18080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12ca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12b20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12a60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d129a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d128e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12820
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12760
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d126a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d125e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d123a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d122e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d12160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d120a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0bf00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0be40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0bd80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0bcc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0bc00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0bb40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0ba80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b9c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b900
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b780
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b6c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b540
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b3c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b300
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d04740
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39840
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c01780
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c01240
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d05f20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39b40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39c00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c0de60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39cc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39e40
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39f00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a240a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24160
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24220
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a242e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a243a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a245e0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39d80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a246a0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c01600
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c01480
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a39a80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c0dda0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d0b0c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c013c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c01180
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c010c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2c0df20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24760
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f080
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d04140
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24ee0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d04200
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24e20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d042c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24d60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d04380
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24ca0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d04440
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24be0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d04500
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24b20
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d045c0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a24a60
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2d04680
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fc80
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d460
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fbc0
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d520
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fb00
ath10k: htt rx, msg_type: 0x1
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d5e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: htt rx mgmt ctrl
ath10k: wmi start scan
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12be7460 len 200 n_items 1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d28526e0
ath10k: htc ep 2 got 1 credits (total 1)
ath10k: htc rx completion ep 2 skb d2d05da0
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 1 reason 4 freq 2412 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_STARTED
ath10k: htc rx completion ep 2 skb d2d05ce0
ath10k: WMI_SCAN_EVENTID
ath10k: scan event type 4 reason 4 freq 2412 req_id 40961 scan_id 40960 vdev_id 0
ath10k: SCAN_EVENT_BSS_CHANNEL
ath10k: htc rx completion ep 2 skb d2d05c20
ath10k: chan info err_code 0 freq 2412 cmd_flags 1 noise_floor -113 rx_clear_count 889630 cycle_count 18258489
ath10k: htc rx completion ep 2 skb d2d05b60
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2d05b60 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -82, rate_idx 0
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0fa40
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d6a0
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2d05aa0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2d05aa0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -83, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f980
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2d059e0
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2d059e0 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -86, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d760
ath10k: htt rx, msg_type: 0x1
ath10k: htc rx completion ep 2 skb d2d05920
ath10k: event mgmt rx status 00000000
ath10k: event mgmt rx skb d2d05920 len 244 ftype 00 stype 40
ath10k: event mgmt rx freq 2412 band 0 snr -86, rate_idx 0
ath10k: htt rx mgmt ctrl
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f8c0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d820
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f800
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a7d8e0
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: htc rx completion ep 2 skb d2d05860
ath10k: wmi event debug mesg len 36
ath10k: pci hif send complete check
ath10k: htc rx completion ep 1 skb d2a0f740
ath10k: htt rx, msg_type: 0x1
ath10k: htt rx dropping due to zero-len
ath10k: firmware crashed!
ath10k: hardware name qca988x hw2.0 version 0x4100016c
ath10k: firmware version: 999.999.0.636
ath10k: target register Dump Location: 0x0040AC14
ath10k: target Register Dump
ath10k: [00]: 0x4100016C 0x00000000 0x009C4521 0x00000000
ath10k: [04]: 0x009C4521 0x00060330 0x00000019 0x00955A00
ath10k: [08]: 0x00008CC1 0x00000000 0x0040CC94 0x00000020
ath10k: [12]: 0x00000000 0x00000000 0x00958360 0x0095836B
ath10k: [16]: 0x809A0978 0x0040AD94 0x00439304 0x0040D074
ath10k: [20]: 0x0000FFFF 0x00000000 0x00431524 0x00000000
ath10k: [24]: 0x809A0978 0x0040AD94 0x00439304 0x0233079E
ath10k: [28]: 0x809AD1A2 0x0040ADE4 0x00439304 0x0043F68C
ath10k: [32]: 0x809B5DA3 0x00000000 0x000000FE 0x004440FC
ath10k: [36]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [40]: 0x00000000 0x00000000 0x00000000 0x00000000
ath10k: [44]: 0x00439BB8 0x00000000 0x00000000 0x00400000
ath10k: [48]: 0x809AE0B4 0x0040AE04 0x00400000 0x0043F68C
ath10k: [52]: 0x00000001 0x00000000 0x004231F0 0x00400000
ath10k: [56]: 0x809AE17E 0x0040AE44 0x0040FE6C 0x0040D310
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: mac monitor refs: promisc 0 monitor 0 cac 0
ath10k: wmi mgmt vdev down id 0x1
ath10k: htc ep 2 consumed 1 credits (total 0)
ath10k: HTC: endpoint 2 needs credit update
ath10k: pci tx item 0 paddr 0x12c1cc60 len 16 n_items 1
ath10k: wmi vdev stop id 0x1
ath10k: ath10k_htc_notify_tx_completion: ep 2 skb d2bfb620
ath10k: failed to to request monitor vdev 1 stop: -11
ath10k: failed to synchronise monitor vdev 1: -110
ath10k: mac monitor vdev 1 stopped
ath10k: failed to stop monitor vdev: -110
ath10k: WMI vdev delete id 1
eth0: no IPv6 routers present
br0: no IPv6 routers present
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: TR : ath10k: firmware crash in station mode
Based on my testing, due to firmware 636 is not able to support standalone monitor mode, and bridge requires promiscuous mode, it would crash. Then, I have tested with AP firmware and it works well. But then, I have not up the node for long time.
By the way, I am associating the AP before setting "iw dev wlan0 set 4addr on" and bridge it.
----
Chun-Yeow
Quoted 20 lines · Vu Hai NGUYEN
Quoted 1 line
Yes, you can do it with firmware 10.1.467.2-1 but not firmware 999.999.0.636.
They all crashed, but the 999 crashed sooner (even before associated with the AP) , I've posted it the logs before for Michal Kazior. Here is my old email:
http://lists.infradead.org/pipermail/ath10k/2014-May/002042.htmlQuoted 14 lines
Quoted 7 lines
This is NULL dereference in firmware. I suspect it's an incomplete driver-firmware setup (i.e. some commands weren't issued or were invalid).
Can you enable debug logs ( echo
0xffffff3f| sudo tee/sys/module/ath10k_core/parameters/debug_mask) before you try to associate and post logs, please? I'd like to see command sequence sent
to firmware before the crash happens.I enable directly the
debug_maskwhen I load the module "modprobe ath10k_core.ko debug_mask=0x0xffffff3f" (I thought it is the same thing like what you do, right?). You can found de debug mess in the attached file (debug_10-1.txt). (line 3007: wlan0: associated and then in line 3008: ath10k: firmware crashed!)Quoted 3 lines
Can you post the crash logs (as noted above) when you try the 999 branch too, please? It seems 999 crashes sooner than 10.1. It might be helpful to see the different crash points.
Quoted 9 lines
Quoted 1 line
Yes it crashed sooner. There are no wlan0: associated in the debug message. (attached file: debug_999.txt).
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: TR : ath10k: firmware crash in station mode
Quoted 7 lines · Yeoh Chun-Yeow
Based on my testing, due to firmware 636 is not able to support standalone monitor mode, and bridge requires promiscuous mode, it would crash. Then, I have tested with AP firmware and it works well. But then, I have not up the node for long time.
By the way, I am associating the AP before setting "iw dev wlan0 set 4addr on" and bridge it.
Well, if nothing else, you could try my firmware, with a small patch to make it work on standard kernels. If you can crash it, send me the firmware crash message and I'll see if I can fix it.
Current binary is non-commercial, but I will shortly have a free-for-whatever-use binary that has everything except the multiple-vif-to-same-ap-with-encryption feature. Virtually no one except folks like us doing wifi testing equipment needs that feature....
My firmware has been fairly well tested with my patched kernel and in station and AP mode. I'm sure there are still bugs, but I will try to fix them, at least.
http://www.candelatech.com/vsta.php
Thanks,
Ben
Quoted 41 lines
----
Chun-YeowQuoted 20 lines · Vu Hai NGUYEN
Quoted 1 line
Yes, you can do it with firmware 10.1.467.2-1 but not firmware 999.999.0.636.
They all crashed, but the 999 crashed sooner (even before associated with the AP) , I've posted it the logs before for Michal Kazior. Here is my old email:
http://lists.infradead.org/pipermail/ath10k/2014-May/002042.htmlQuoted 14 lines
Quoted 7 lines
This is NULL dereference in firmware. I suspect it's an incomplete driver-firmware setup (i.e. some commands weren't issued or were invalid).
Can you enable debug logs ( echo
0xffffff3f| sudo tee/sys/module/ath10k_core/parameters/debug_mask) before you try to associate and post logs, please? I'd like to see command sequence sent
to firmware before the crash happens.I enable directly the
debug_maskwhen I load the module "modprobe ath10k_core.ko debug_mask=0x0xffffff3f" (I thought it is the same thing like what you do, right?). You can found de debug mess in the attached file (debug_10-1.txt). (line 3007: wlan0: associated and then in line 3008: ath10k: firmware crashed!)Quoted 3 lines
Can you post the crash logs (as noted above) when you try the 999 branch too, please? It seems 999 crashes sooner than 10.1. It might be helpful to see the different crash points.
Quoted 9 lines
Quoted 1 line
Yes it crashed sooner. There are no wlan0: associated in the debug message. (attached file: debug_999.txt).
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: TR : ath10k: firmware crash in station mode
Quoted 18 lines · Ben Greear
Quoted 7 lines · Yeoh Chun-Yeow
Based on my testing, due to firmware 636 is not able to support standalone monitor mode, and bridge requires promiscuous mode, it would crash. Then, I have tested with AP firmware and it works well. But then, I have not up the node for long time.
By the way, I am associating the AP before setting "iw dev wlan0 set 4addr on" and bridge it.
Well, if nothing else, you could try my firmware, with a small patch to make it work on standard kernels. If you can crash it, send me the firmware crash message and I'll see if I can fix it.
Current binary is non-commercial, but I will shortly have a free-for-whatever-use binary that has everything except the multiple-vif-to-same-ap-with-encryption feature. Virtually no one except folks like us doing wifi testing equipment needs that feature....
Quoted 9 lines
My firmware has been fairly well tested with my patched kernel and in station and AP mode. I'm sure there are still bugs, but I will try to fix them, at least.
http://www.candelatech.com/vsta.php
Thanks,
Ben
Ben,
I tried using your firmware on a 3.14 kernel without any luck. I don't see any errors, but the sta never associates nor see's any ap on scan. I followed http://www.candelatech.com/vsta.php step 4 and step 6 and did this on OpenWrt, so the udev stuff doesn't apply.
What we really need here is for QCA to step up to the plate and fix their firmware... or better yet open it up and let the community fix what they can't! This is really holding ath10k and QCA988x back. We have customers looking for alternatives after getting a rude awakening to ath10k.
Kalle - Will QCA make some sort of statement as to what the plans are with this firmware? Will there be updates? Will the features be merged into a single firmware? Will it be opened up so that the community can improve the product?
Regards,
Tim
Quoted 49 lines
Quoted 37 lines
----
Chun-YeowQuoted 20 lines · Vu Hai NGUYEN
Quoted 1 line
Yes, you can do it with firmware 10.1.467.2-1 but not firmware 999.999.0.636.
They all crashed, but the 999 crashed sooner (even before associated with the AP) , I've posted it the logs before for Michal Kazior. Here is my old email:
http://lists.infradead.org/pipermail/ath10k/2014-May/002042.htmlQuoted 14 lines
Quoted 7 lines
This is NULL dereference in firmware. I suspect it's an incomplete driver-firmware setup (i.e. some commands weren't issued or were invalid).
Can you enable debug logs ( echo
0xffffff3f| sudo tee/sys/module/ath10k_core/parameters/debug_mask) before you try to associate and post logs, please? I'd like to see command sequence sent
to firmware before the crash happens.I enable directly the
debug_maskwhen I load the module "modprobe ath10k_core.ko debug_mask=0x0xffffff3f" (I thought it is the same thing like what you do, right?). You can found de debug mess in the attached file (debug_10-1.txt). (line 3007: wlan0: associated and then in line 3008: ath10k: firmware crashed!)Quoted 3 lines
Can you post the crash logs (as noted above) when you try the 999 branch too, please? It seems 999 crashes sooner than 10.1. It might be helpful to see the different crash points.
Quoted 9 lines
Quoted 1 line
Yes it crashed sooner. There are no wlan0: associated in the debug message. (attached file: debug_999.txt).
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCEQuoted 5 lines
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
Quoted 4 lines
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: TR : ath10k: firmware crash in station mode
Quoted 29 lines · Tim Harvey
Quoted 18 lines · Ben Greear
Quoted 7 lines · Yeoh Chun-Yeow
Based on my testing, due to firmware 636 is not able to support standalone monitor mode, and bridge requires promiscuous mode, it would crash. Then, I have tested with AP firmware and it works well. But then, I have not up the node for long time.
By the way, I am associating the AP before setting "iw dev wlan0 set 4addr on" and bridge it.
Well, if nothing else, you could try my firmware, with a small patch to make it work on standard kernels. If you can crash it, send me the firmware crash message and I'll see if I can fix it.
Current binary is non-commercial, but I will shortly have a free-for-whatever-use binary that has everything except the multiple-vif-to-same-ap-with-encryption feature. Virtually no one except folks like us doing wifi testing equipment needs that feature....
Quoted 9 lines
My firmware has been fairly well tested with my patched kernel and in station and AP mode. I'm sure there are still bugs, but I will try to fix them, at least.
http://www.candelatech.com/vsta.php
Thanks,
Ben
Quoted 6 lines
Ben,
I tried using your firmware on a 3.14 kernel without any luck. I don't see any errors, but the sta never associates nor see's any ap on scan. I followed http://www.candelatech.com/vsta.php step 4 and step 6 and did this on OpenWrt, so the udev stuff doesn't apply.
Skip step 6 unless you are using my kernel. Just step 4 for upstream kernels. I need to make a separate page for folks just using my CT firmware on normal kernels doing normal things...
No arguments with the rest of your email :)
Thanks,
Ben
Signature · 7 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: TR : ath10k: firmware crash in station mode
Quoted 39 lines · Ben Greear
Quoted 29 lines · Tim Harvey
Quoted 18 lines · Ben Greear
Quoted 7 lines · Yeoh Chun-Yeow
Based on my testing, due to firmware 636 is not able to support standalone monitor mode, and bridge requires promiscuous mode, it would crash. Then, I have tested with AP firmware and it works well. But then, I have not up the node for long time.
By the way, I am associating the AP before setting "iw dev wlan0 set 4addr on" and bridge it.
Well, if nothing else, you could try my firmware, with a small patch to make it work on standard kernels. If you can crash it, send me the firmware crash message and I'll see if I can fix it.
Current binary is non-commercial, but I will shortly have a free-for-whatever-use binary that has everything except the multiple-vif-to-same-ap-with-encryption feature. Virtually no one except folks like us doing wifi testing equipment needs that feature....
Quoted 9 lines
My firmware has been fairly well tested with my patched kernel and in station and AP mode. I'm sure there are still bugs, but I will try to fix them, at least.
http://www.candelatech.com/vsta.php
Thanks,
BenQuoted 6 lines
Ben,
I tried using your firmware on a 3.14 kernel without any luck. I don't see any errors, but the sta never associates nor see's any ap on scan. I followed http://www.candelatech.com/vsta.php step 4 and step 6 and did this on OpenWrt, so the udev stuff doesn't apply.
Quoted 5 lines
Skip step 6 unless you are using my kernel. Just step 4 for upstream kernels. I need to make a separate page for folks just using my CT firmware on normal kernels doing normal things...
No arguments with the rest of your email :)
I have just uploaded my latest firmware image, and it now works on un-modified kernels (tested on Ubuntu 14.04 system with kernel 3.13.0-24-generic: Brought up a station, associated with AP on channel 36, obtained DHCP address). I have not done any extensive testing of our firmware on standard kernels.
You should only have to copy the firmware image to your existing system and reboot and it should just work (tm).
One problem we often see is that the regulatory domain gets too restrictive when we have several nics and/or different timezones and/or different domains configured directly with 'iw'.
This keeps you from scanning on all normally available channels.
I have hacked my kernel to allow ignoring ath10k (and ath9k) regulatory settings in the NICs, and we are now careful about the timezone settings, but please do double-check that if you have scan issues, you are actually scanning the needed channels.
'iw event' has enough info to show this.
If you do get a chance to try our firmware again, I'm interested to know the results.
Thanks,
Ben
Quoted 4 lines
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: TR : ath10k: firmware crash in station mode
In reply to Tim HarveyHi Tim,
Quoted 4 lines · Tim Harvey
Kalle - Will QCA make some sort of statement as to what the plans are with this firmware? Will there be updates? Will the features be merged into a single firmware? Will it be opened up so that the community can improve the product?
I'm responsible only for the host driver and we have a separate team doing the firmware development. I can not comment on behalf of that team.
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: TR : ath10k: firmware crash in station mode
In reply to Yeoh Chun-YeowQuoted 7 lines · Yeoh Chun-Yeow
Based on my testing, due to firmware 636 is not able to support standalone monitor mode, and bridge requires promiscuous mode, it would crash. Then, I have tested with AP firmware and it works well. But then, I have not up the node for long time.
By the way, I am associating the AP before setting "iw dev wlan0 set 4addr on" and bridge it.
I am able to reproduce this firmware crash as well very easily. While you can avoid it by associating first, then setting 4addr, then adding it to a bridge, any dissassociation/reassociation will trigger the crash. Additionally its not always convenient to configure things in that order - using OpenWrt with the interface bridged and wds enabled will always trigger the crash on association.
Tim
Quoted 36 lines
----
Chun-YeowQuoted 20 lines · Vu Hai NGUYEN
Quoted 1 line
Yes, you can do it with firmware 10.1.467.2-1 but not firmware 999.999.0.636.
They all crashed, but the 999 crashed sooner (even before associated with the AP) , I've posted it the logs before for Michal Kazior. Here is my old email:
http://lists.infradead.org/pipermail/ath10k/2014-May/002042.htmlQuoted 14 lines
Quoted 7 lines
This is NULL dereference in firmware. I suspect it's an incomplete driver-firmware setup (i.e. some commands weren't issued or were invalid).
Can you enable debug logs ( echo
0xffffff3f| sudo tee/sys/module/ath10k_core/parameters/debug_mask) before you try to associate and post logs, please? I'd like to see command sequence sent
to firmware before the crash happens.I enable directly the
debug_maskwhen I load the module "modprobe ath10k_core.ko debug_mask=0x0xffffff3f" (I thought it is the same thing like what you do, right?). You can found de debug mess in the attached file (debug_10-1.txt). (line 3007: wlan0: associated and then in line 3008: ath10k: firmware crashed!)Quoted 3 lines
Can you post the crash logs (as noted above) when you try the 999 branch too, please? It seems 999 crashes sooner than 10.1. It might be helpful to see the different crash points.
Quoted 9 lines
Quoted 1 line
Yes it crashed sooner. There are no wlan0: associated in the debug message. (attached file: debug_999.txt).
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
Quoted 4 lines
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Re: TR : ath10k: firmware crash in station mode
Quoted 10 lines
I am able to reproduce this firmware crash as well very easily. While you can avoid it by associating first, then setting 4addr, then adding it to a bridge, any dissassociation/reassociation will trigger the crash. Additionally its not always convenient to configure things in that order - using OpenWrt with the interface bridged and wds enabled will always trigger the crash on association.
Tim
Yes. I agree with that. But it seems that this is the best we can do for the time being.
---
Chun-Yeow
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
PATCH 1/1 ath10k: support get/set antenna configurations.
In reply to Ben GreearFrom: Ben Greear <[email protected]>
Tested with CT firmware, but should work on standard firmware as well.
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled.
--- drivers/net/wireless/ath/ath10k/core.h | 6 +++ drivers/net/wireless/ath/ath10k/mac.c | 72 ++++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 5 +++ 3 files changed, 83 insertions(+)
drivers/net/wireless/ath/ath10k/core.h +6 -0
@@ -440,6 +440,12 @@ struct ath10k {bool radar_enabled;int num_started_vdevs; +/* Protected by conf-mutex */ +unsigned char supp_tx_chainmask; +unsigned char supp_rx_chainmask; +unsigned char cfg_tx_chainmask; +unsigned char cfg_rx_chainmask; +struct wmi_pdev_set_wmm_params_arg wmm_params;struct completion install_key_done;
drivers/net/wireless/ath/ath10k/mac.c +72 -0
96 lines not on this page · raw message
drivers/net/wireless/ath/ath10k/wmi.c +5 -0
@@ -2558,6 +2558,8 @@ static int ath10k_wmi_main_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_RX_CHAIN_MASK ); + ar->supp_tx_chainmask =TARGET_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI );
@@ -2652,6 +2654,9 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_10X_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_10X_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_10X_RX_CHAIN_MASK ); +/* TODO: Have to deal with 2x2 chips if/when the come out. */ + ar->supp_tx_chainmask =TARGET_10X_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_10X_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI );
Signature · 7 lines
1.9.1.423.g4596e3a _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 4 lines · Avery Pennarun
From: Ben Greear <[email protected]>
Tested with CT firmware, but should work on standard firmware as well.
I think this is unnecessary as it works with the standard firmware, right?
Quoted 7 lines
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled.
Signed-off-by Ben Greear <[email protected]>Tested-by Avery Pennarun <[email protected]>
I'm no lawyer, but I think that when person A resends person B's patch then person A should add Signed-off-by line as well. And then that would make Tested-by line moot as well.
drivers/net/wireless/ath/ath10k/core.h struct ath10k { · line 447
Quoted 11 lines
drivers/net/wireless/ath/ath10k/core.h +5
-0@@ -440,6 +440,12 @@ struct ath10k {bool radar_enabled;int num_started_vdevs; +/* Protected by conf-mutex */ +unsigned char supp_tx_chainmask; +unsigned char supp_rx_chainmask; +unsigned char cfg_tx_chainmask; +unsigned char cfg_rx_chainmask;
char is a bit odd here, as we are not storing characters here. Would u8 be better?
drivers/net/wireless/ath/ath10k/core.h struct ath10k {
Quoted 12 lines
drivers/net/wireless/ath/ath10k/core.h +12
-0+static int __ath10k_set_antenna (struct ath10k *ar,u32 tx_ant,u32 rx_ant) +{ +int ret; + +lockdep_assert_held (&ar->conf_mutex); + + ar->cfg_tx_chainmask = tx_ant; + ar->cfg_rx_chainmask = rx_ant; + +if ((ar->state !=ATH10K_STATE_ON ) && + (ar->state !=ATH10K_STATE_RESTARTED )) +return 0 ;
Should we return an error value instead? Aren't we otherwise cheating by claiming that the command was succesful?
drivers/net/wireless/ath/ath10k/core.h
Quoted 12 lines
drivers/net/wireless/ath/ath10k/core.h +12
-0+static int ath10k_set_antenna (struct ieee80211_hw *hw,u32 tx_ant,u32 rx_ant) +{ +struct ath10k *ar = hw->priv; +int ret; + +mutex_lock (&ar->conf_mutex); + ret =__ath10k_set_antenna (ar, tx_ant, rx_ant); +mutex_unlock (&ar->conf_mutex); +return ret; +} + +
One empty line is enough here.
Quoted 12 lines
drivers/net/wireless/ath/ath10k/wmi.c +2
-0@@ -2558,6 +2558,8 @@ static int ath10k_wmi_main_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_RX_CHAIN_MASK ); + ar->supp_tx_chainmask =TARGET_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI );
drivers/net/wireless/ath/ath10k/wmi.c static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) · line 2662
Quoted 9 lines
drivers/net/wireless/ath/ath10k/wmi.c +3
-0@@ -2652,6 +2654,9 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_10X_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_10X_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_10X_RX_CHAIN_MASK ); +/* TODO: Have to deal with 2x2 chips if/when the come out. */ + ar->supp_tx_chainmask =TARGET_10X_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_10X_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI );
This initialisation looks out of place as we these variables have nothing to do with the actual WMI_INIT_CMDID command. And besides, they would get overwritten every time we start the firmware. Is that on purpose?
I think we should find more approriate place, for example ath10k_mac_register() would be one to look at.
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 7 lines · Kalle Valo
Quoted 7 lines
drivers/net/wireless/ath/ath10k/mac.c +7
-0+static int __ath10k_set_antenna (struct ath10k *ar,u32 tx_ant,u32 rx_ant) +{ +int ret; + +lockdep_assert_held (&ar->conf_mutex); + + ar->cfg_tx_chainmask = tx_ant;
Quoted 8 lines
drivers/net/wireless/ath/ath10k/mac.c void ath10k_halt(struct ath10k *ar) · line 2362
Quoted 5 lines
drivers/net/wireless/ath/ath10k/mac.c +5
-0+ ar->cfg_rx_chainmask = rx_ant; + +if ((ar->state !=ATH10K_STATE_ON ) && + (ar->state !=ATH10K_STATE_RESTARTED )) +return 0 ;Should we return an error value instead? Aren't we otherwise cheating by claiming that the command was succesful?
I think not..we store the values, and they will be applied when firmware does come up.
We might should return error if bad bit patterns are set, but to be honest, aside from trial and error, I'm not sure how to figure those out. Maybe some internal QCA docs document the allowed configurations?
Quoted 27 lines
Quoted 12 lines
drivers/net/wireless/ath/ath10k/wmi.c +2
-0@@ -2558,6 +2558,8 @@ static int ath10k_wmi_main_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_RX_CHAIN_MASK ); + ar->supp_tx_chainmask =TARGET_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI );drivers/net/wireless/ath/ath10k/wmi.c static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) · line 2662
Quoted 9 lines
drivers/net/wireless/ath/ath10k/wmi.c +3
-0@@ -2652,6 +2654,9 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_10X_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_10X_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_10X_RX_CHAIN_MASK ); +/* TODO: Have to deal with 2x2 chips if/when the come out. */ + ar->supp_tx_chainmask =TARGET_10X_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_10X_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI );This initialisation looks out of place as we these variables have nothing to do with the actual
WMI_INIT_CMDIDcommand. And besides, they would get overwritten every time we start the firmware. Is that on purpose?
Quoted 2 lines
I think we should find more approriate place, for example
ath10k_mac_register()would be one to look at.
It doesn't hurt that they are over-written, but probably it can be done better.
I'm knee deep in other bugs though...maybe Avery has time to address this.
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 28 lines · Ben Greear
Quoted 27 lines · Kalle Valo
Quoted 12 lines
drivers/net/wireless/ath/ath10k/wmi.c +2
-0@@ -2558,6 +2558,8 @@ static int ath10k_wmi_main_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_RX_CHAIN_MASK ); + ar->supp_tx_chainmask =TARGET_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI );drivers/net/wireless/ath/ath10k/wmi.c static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) · line 2662
Quoted 9 lines
drivers/net/wireless/ath/ath10k/wmi.c +3
-0@@ -2652,6 +2654,9 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_10X_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_10X_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_10X_RX_CHAIN_MASK ); +/* TODO: Have to deal with 2x2 chips if/when the come out. */ + ar->supp_tx_chainmask =TARGET_10X_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_10X_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI );This initialisation looks out of place as we these variables have nothing to do with the actual
WMI_INIT_CMDIDcommand. And besides, they would get overwritten every time we start the firmware. Is that on purpose?
Quoted 5 lines
Quoted 2 lines
I think we should find more approriate place, for example
ath10k_mac_register()would be one to look at.It doesn't hurt that they are over-written, but probably it can be done better.
As far as I can see, supp_{tx,rx}_chainmask are effectively constants.
So it kind of makes sense to me to initialize them here with a bunch
of other constants. cfg_{tx,rx}_chainmask do not seem to be initialized ever (so I guess they default to zero, and we don't change the antenna mask unless they are set). I think this looks safe.
Quoted 2 lines
I'm knee deep in other bugs though...maybe Avery has time to address this.
I'll respin the patch with the other suggested changed. If you guys think the supp_{tx,rx}_chainmask stuff should be moved elsewhere, let me know where and I can make another one :)
Have fun,
Avery
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 32 lines · Avery Pennarun
Quoted 31 lines · Ben Greear
Quoted 29 lines · Kalle Valo
Quoted 12 lines
drivers/net/wireless/ath/ath10k/wmi.c +2
-0@@ -2558,6 +2558,8 @@ static int ath10k_wmi_main_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_RX_CHAIN_MASK ); + ar->supp_tx_chainmask =TARGET_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI );drivers/net/wireless/ath/ath10k/wmi.c static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) · line 2662
Quoted 9 lines
drivers/net/wireless/ath/ath10k/wmi.c +3
-0@@ -2652,6 +2654,9 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_10X_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_10X_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_10X_RX_CHAIN_MASK ); +/* TODO: Have to deal with 2x2 chips if/when the come out. */ + ar->supp_tx_chainmask =TARGET_10X_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_10X_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI );This initialisation looks out of place as we these variables have nothing to do with the actual
WMI_INIT_CMDIDcommand. And besides, they would get overwritten every time we start the firmware. Is that on purpose?I think we should find more approriate place, for example
ath10k_mac_register()would be one to look at.
Quoted 8 lines
Quoted 2 lines
It doesn't hurt that they are over-written, but probably it can be done better.
As far as I can see, supp_{tx,rx}_chainmask are effectively constants.
So it kind of makes sense to me to initialize them here with a bunch
of other constants. cfg_{tx,rx}_chainmask do not seem to be initialized ever (so I guess they default to zero, and we don't change the antenna mask unless they are set). I think this looks safe.
The purpose of ath10k_wmi_main_cmd_init() to initiatialise 'struct wmi_init_cmd' and send it to the firmware, it should not do anything else. Initialisation of the fields in question do not belong to that function, that kind of higher level logic should be the responsibility of mac.c.
My idea here is that wmi.c is implementening WMI as a protocol, and mac.c then just uses wmi.c as protocol abstraction mac.c. The exception we have are the WMI event handling and that's just to keep the code simple.
Quoted 6 lines
Quoted 2 lines
I'm knee deep in other bugs though...maybe Avery has time to address this.
I'll respin the patch with the other suggested changed. If you guys think the supp_{tx,rx}_chainmask stuff should be moved elsewhere, let me know where and I can make another one :)
I want to keep the architecture of ath10k clean and that's why I really would prefer to have this somewhere else than in wmi.c.
BTW, please also CC linux-wireless when submitting ath10k patches. I have documented the process here:
http://wireless.kernel.org/en/users/Drivers/ath10k/sources#Submitting_patches
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Sorry for all the noise. The patch is indeed working.
I have verified that the number of spatial streams are reduced accordingly if you reduce the tx chainmask.
----
Chun-Yeow
Quoted 69 lines · Kalle Valo
Quoted 32 lines · Avery Pennarun
Quoted 31 lines · Ben Greear
Quoted 29 lines · Kalle Valo
Quoted 12 lines
drivers/net/wireless/ath/ath10k/wmi.c +2
-0@@ -2558,6 +2558,8 @@ static int ath10k_wmi_main_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_RX_CHAIN_MASK ); + ar->supp_tx_chainmask =TARGET_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI );drivers/net/wireless/ath/ath10k/wmi.c static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) · line 2662
Quoted 9 lines
drivers/net/wireless/ath/ath10k/wmi.c +3
-0@@ -2652,6 +2654,9 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_10X_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_10X_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_10X_RX_CHAIN_MASK ); +/* TODO: Have to deal with 2x2 chips if/when the come out. */ + ar->supp_tx_chainmask =TARGET_10X_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_10X_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI );This initialisation looks out of place as we these variables have nothing to do with the actual
WMI_INIT_CMDIDcommand. And besides, they would get overwritten every time we start the firmware. Is that on purpose?I think we should find more approriate place, for example
ath10k_mac_register()would be one to look at.Quoted 8 lines
Quoted 2 lines
It doesn't hurt that they are over-written, but probably it can be done better.
As far as I can see, supp_{tx,rx}_chainmask are effectively constants.
So it kind of makes sense to me to initialize them here with a bunch
of other constants. cfg_{tx,rx}_chainmask do not seem to be initialized ever (so I guess they default to zero, and we don't change the antenna mask unless they are set). I think this looks safe.The purpose of
ath10k_wmi_main_cmd_init()to initiatialise 'structwmi_init_cmd' and send it to the firmware, it should not do anything else. Initialisation of the fields in question do not belong to that function, that kind of higher level logic should be the responsibility ofmac.c.My idea here is that
wmi.cis implementening WMI as a protocol, andmac.cthen just useswmi.cas protocol abstractionmac.c. The exception we have are the WMI event handling and that's just to keep the code simple.Quoted 6 lines
Quoted 2 lines
I'm knee deep in other bugs though...maybe Avery has time to address this.
I'll respin the patch with the other suggested changed. If you guys think the supp_{tx,rx}_chainmask stuff should be moved elsewhere, let me know where and I can make another one :)
I want to keep the architecture of ath10k clean and that's why I really would prefer to have this somewhere else than in
wmi.c.BTW, please also CC linux-wireless when submitting ath10k patches. I have documented the process here:
http://wireless.kernel.org/en/users/Drivers/ath10k/sources#Submitting_patches
Quoted 7 lines
--
Kalle Valo_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 4 lines · Yeoh Chun-Yeow
Sorry for all the noise. The patch is indeed working.
I have verified that the number of spatial streams are reduced accordingly if you reduce the tx chainmask.
Hi, can you give a hint what you might have been doing wrong during your test, in order to help others in the future?
Thanks,
Avery
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
It's my own mistake while patching the patch.
Anyway, I can share my test method:
AP: (ath10k)
1. iw phy0 set antenna 1 1 (1 tx chainmask and 1 rx chainmask)
2. Use hostapd to bring up 80MHz AP
STA: (ath10k)
1. ifconfig wlan0
2. iw wlan0 connect SSID
3. echo 0x200 > /sys/module/ath10k_core/parameters/debug_mask
4. Check the "vht_nss", it should be based on your configuration of antenna, such as vht_nss = 1 for 1 tx chainmask in AP
---
Chun-Yeow
Quoted 6 lines · Avery Pennarun
Quoted 4 lines · Yeoh Chun-Yeow
Sorry for all the noise. The patch is indeed working.
I have verified that the number of spatial streams are reduced accordingly if you reduce the tx chainmask.
Quoted 6 lines
Hi, can you give a hint what you might have been doing wrong during your test, in order to help others in the future?
Thanks,
Avery
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 4 lines · Yeoh Chun-Yeow
Sorry for all the noise. The patch is indeed working.
I have verified that the number of spatial streams are reduced accordingly if you reduce the tx chainmask.
Nice! Thanks for testing this, it always good to hear from other users (than the original patch author) if a new feature is working or not.
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
PATCH v3 1/1 ath10k: support get/set antenna configurations.
In reply to Avery PennarunFrom: Ben Greear <[email protected]>
Tested with CT firmware, but should work on standard firmware as well.
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled.
--- drivers/net/wireless/ath/ath10k/core.h | 6 +++ drivers/net/wireless/ath/ath10k/mac.c | 71 ++++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 5 +++ 3 files changed, 82 insertions(+)
drivers/net/wireless/ath/ath10k/core.h +6 -0
@@ -440,6 +440,12 @@ struct ath10k {bool radar_enabled;int num_started_vdevs; +/* Protected by conf-mutex */ +u8 supp_tx_chainmask; +u8 supp_rx_chainmask; +u8 cfg_tx_chainmask; +u8 cfg_rx_chainmask; +struct wmi_pdev_set_wmm_params_arg wmm_params;struct completion install_key_done;
drivers/net/wireless/ath/ath10k/mac.c +71 -0
95 lines not on this page · raw message
drivers/net/wireless/ath/ath10k/wmi.c +5 -0
@@ -2558,6 +2558,8 @@ static int ath10k_wmi_main_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_RX_CHAIN_MASK ); + ar->supp_tx_chainmask =TARGET_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI );
@@ -2652,6 +2654,9 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_10X_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_10X_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_10X_RX_CHAIN_MASK ); +/* TODO: Have to deal with 2x2 chips if/when the come out. */ + ar->supp_tx_chainmask =TARGET_10X_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_10X_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI );
Signature · 7 lines
1.9.1.423.g4596e3a _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
I try to test by setting of antennas in my AP (firmware version 10.1.467.2-1) using ath10k to the following:
iw phy0 info | grep Antennas
Available Antennas: TX 0x7 RX 0x7
Configured Antennas: TX 0x1 RX 0x1
But my STA (using ath10k) seems to get the same throughput even with single tx and rx antenna.
Anyone has any idea.
---
Chun-Yeow
Quoted 165 lines · Avery Pennarun
From: Ben Greear <[email protected]>
Tested with CT firmware, but should work on standard firmware as well.
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled.
Signed-off-by Ben Greear <[email protected]>Signed-off-by Avery Pennarun <[email protected]>--- drivers/net/wireless/ath/ath10k/core.h | 6 +++ drivers/net/wireless/ath/ath10k/mac.c | 71 ++++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 5 +++ 3 files changed, 82 insertions(+)drivers/net/wireless/ath/ath10k/core.h +6
-0@@ -440,6 +440,12 @@ struct ath10k {bool radar_enabled;int num_started_vdevs; +/* Protected by conf-mutex */ +u8 supp_tx_chainmask; +u8 supp_rx_chainmask; +u8 cfg_tx_chainmask; +u8 cfg_rx_chainmask; +struct wmi_pdev_set_wmm_params_arg wmm_params;struct completion install_key_done;drivers/net/wireless/ath/ath10k/mac.c +71
-0@@ -2329,6 +2329,68 @@ void ath10k_halt(struct ath10k *ar)spin_unlock_bh (&ar->data_lock); } +static int ath10k_get_antenna (struct ieee80211_hw *hw,u32 *tx_ant,u32 *rx_ant) +{ +struct ath10k *ar = hw->priv; + +mutex_lock (&ar->conf_mutex); + +if (ar->cfg_tx_chainmask) { + *tx_ant = ar->cfg_tx_chainmask; + *rx_ant = ar->cfg_rx_chainmask; + }else { + *tx_ant = ar->supp_tx_chainmask; + *rx_ant = ar->supp_rx_chainmask; + } + +mutex_unlock (&ar->conf_mutex); + +return 0 ; +} + +static int __ath10k_set_antenna (struct ath10k *ar,u32 tx_ant,u32 rx_ant) +{ +int ret; + +lockdep_assert_held (&ar->conf_mutex); + + ar->cfg_tx_chainmask = tx_ant; + ar->cfg_rx_chainmask = rx_ant; + +if ((ar->state !=ATH10K_STATE_ON ) && + (ar->state !=ATH10K_STATE_RESTARTED )) +return 0 ; + + ret =ath10k_wmi_pdev_set_param (ar, ar->wmi.pdev_param->tx_chain_mask, + tx_ant); +if (ret) { +ath10k_warn ("failed to set tx-chainmask: %d, req 0x%x\n" , + ret, tx_ant); +return ret; + } + + ret =ath10k_wmi_pdev_set_param (ar, ar->wmi.pdev_param->rx_chain_mask, + rx_ant); +if (ret) { +ath10k_warn ("failed to set rx-chainmask: %d, req 0x%x\n" , + ret, rx_ant); +return ret; + } + +return 0 ; +} + +static int ath10k_set_antenna (struct ieee80211_hw *hw,u32 tx_ant,u32 rx_ant) +{ +struct ath10k *ar = hw->priv; +int ret; + +mutex_lock (&ar->conf_mutex); + ret =__ath10k_set_antenna (ar, tx_ant, rx_ant); +mutex_unlock (&ar->conf_mutex); +return ret; +} +static int ath10k_start (struct ieee80211_hw *hw) {struct ath10k *ar = hw->priv;@@ -2370,6 +2432,10 @@ static int ath10k_start(struct ieee80211_hw *hw)if (ret)ath10k_warn ("failed to enable dynamic BW: %d\n" , ret); +if (ar->cfg_tx_chainmask) +__ath10k_set_antenna (ar, ar->cfg_tx_chainmask, + ar->cfg_rx_chainmask); +/* * By default FW set ARP frames ac to voice (6). In that case ARP * exchange is not working properly for UAPSD enabled AP. ARP requests @@ -4252,6 +4318,8 @@ static const struct ieee80211_ops ath10k_ops = { .set_frag_threshold = ath10k_set_frag_threshold, .flush = ath10k_flush, .tx_last_beacon = ath10k_tx_last_beacon, + .set_antenna = ath10k_set_antenna, + .get_antenna = ath10k_get_antenna, .restart_complete = ath10k_restart_complete, .get_survey = ath10k_get_survey, .set_bitrate_mask = ath10k_set_bitrate_mask,@@ -4601,6 +4669,9 @@ int ath10k_mac_register(struct ath10k *ar)BIT (NL80211_IFTYPE_ADHOC ) |BIT (NL80211_IFTYPE_AP ); + ar->hw->wiphy->available_antennas_rx = ar->supp_rx_chainmask; + ar->hw->wiphy->available_antennas_tx = ar->supp_tx_chainmask; +if (!test_bit (ATH10K_FW_FEATURE_NO_P2P , ar->fw_features)) ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |drivers/net/wireless/ath/ath10k/wmi.c +5
-1@@ -2558,6 +2558,8 @@ static int ath10k_wmi_main_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_RX_CHAIN_MASK ); + ar->supp_tx_chainmask =TARGET_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_RX_TIMEOUT_LO_PRI );@@ -2652,6 +2654,9 @@ static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) config.ast_skid_limit =__cpu_to_le32 (TARGET_10X_AST_SKID_LIMIT ); config.tx_chain_mask =__cpu_to_le32 (TARGET_10X_TX_CHAIN_MASK ); config.rx_chain_mask =__cpu_to_le32 (TARGET_10X_RX_CHAIN_MASK ); +/* TODO: Have to deal with 2x2 chips if/when the come out. */ + ar->supp_tx_chainmask =TARGET_10X_TX_CHAIN_MASK ; + ar->supp_rx_chainmask =TARGET_10X_RX_CHAIN_MASK ; config.rx_timeout_pri_vo =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_vi =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); config.rx_timeout_pri_be =__cpu_to_le32 (TARGET_10X_RX_TIMEOUT_LO_PRI ); --1.9.1.423.g4596e3a
Quoted 4 lines
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 9 lines · Yeoh Chun-Yeow
I try to test by setting of antennas in my AP (firmware version 10.1.467.2-1) using ath10k to the following:
iw phy0 info | grep Antennas
Available Antennas: TX0x7RX0x7
Configured Antennas: TX0x1RX0x1But my STA (using ath10k) seems to get the same throughput even with single tx and rx antenna.
What throughput are you getting, and what is the signal strength?
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Here is from the fw_stats:
ath10k PEER stats (1)
=================
Peer MAC address 04:f0:21:0c:a5:1c
Peer RSSI 43
Peer TX rate 877500
Peer RX rate 877500TCP throughput is roughly around 151Mbps.
----
Chun-Yeow
Quoted 4 lines · Avery Pennarun
Quoted 3 lines · Yeoh Chun-Yeow
I try to test by setting of antennas in my AP (firmware version 10.1.467.2-1) using ath10k to the following:
Quoted 8 lines
Quoted 6 lines
iw phy0 info | grep Antennas
Available Antennas: TX0x7RX0x7
Configured Antennas: TX0x1RX0x1But my STA (using ath10k) seems to get the same throughput even with single tx and rx antenna.
What throughput are you getting, and what is the signal strength?
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 11 lines · Yeoh Chun-Yeow
Here is from the
fw_stats:ath10k PEER stats (1) ================= Peer MAC address 04:f0:21:0c:a5:1c Peer RSSI 43 Peer TX rate 877500 Peer RX rate 877500TCP throughput is roughly around 151Mbps.
In my tests it's easy to achieve >151 Mbps with a 40 MHz channel and 2x2. So if you're using an 80 MHz channel (twice the speed) and only one antenna (half the speed) you could still get 151 Mbps pretty easily.
I wouldn't be surprised if your speed is being limited by something else, maybe the host CPU or a slow interconnect on the station or AP (USB perhaps?), so it doesn't look "worse" with only one antenna because it should be at least twice as good when operating normally.
If you use wireshark or tcpdump you should be able to check the MCS level of the packets and see that it's lower with fewer antennas.
Have fun,
Avery
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Here is the screenshot of my wireshark capture. I am seeing 3 spatial streams instead of 1 after setting the antennas.
---
Chun-Yeow
Quoted 23 lines · Avery Pennarun
Quoted 11 lines · Yeoh Chun-Yeow
Here is from the
fw_stats:ath10k PEER stats (1) ================= Peer MAC address 04:f0:21:0c:a5:1c Peer RSSI 43 Peer TX rate 877500 Peer RX rate 877500TCP throughput is roughly around 151Mbps.
In my tests it's easy to achieve >151 Mbps with a 40 MHz channel and 2x2. So if you're using an 80 MHz channel (twice the speed) and only one antenna (half the speed) you could still get 151 Mbps pretty easily.
I wouldn't be surprised if your speed is being limited by something else, maybe the host CPU or a slow interconnect on the station or AP (USB perhaps?), so it doesn't look "worse" with only one antenna because it should be at least twice as good when operating normally.
Quoted 6 lines
If you use wireshark or tcpdump you should be able to check the MCS level of the packets and see that it's lower with fewer antennas.
Have fun,
Avery
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
I also try to confirm using debug_mask in ath10k and it seems also 3 spatial streams:
[ 3826.320000] ath10k: rx skb 86533480 len 1534 vht80 rate_idx 7
vht_nss 3 freq 5180 band 1 flag 0x40600000 fcs-err 0mic-err 0
-----
Chun-Yeow
Quoted 36 lines · Yeoh Chun-Yeow
Here is the screenshot of my wireshark capture. I am seeing 3 spatial streams instead of 1 after setting the antennas.
---
Chun-YeowQuoted 29 lines · Avery Pennarun
Quoted 11 lines · Yeoh Chun-Yeow
Here is from the
fw_stats:ath10k PEER stats (1) ================= Peer MAC address 04:f0:21:0c:a5:1c Peer RSSI 43 Peer TX rate 877500 Peer RX rate 877500TCP throughput is roughly around 151Mbps.
In my tests it's easy to achieve >151 Mbps with a 40 MHz channel and 2x2. So if you're using an 80 MHz channel (twice the speed) and only one antenna (half the speed) you could still get 151 Mbps pretty easily.
I wouldn't be surprised if your speed is being limited by something else, maybe the host CPU or a slow interconnect on the station or AP (USB perhaps?), so it doesn't look "worse" with only one antenna because it should be at least twice as good when operating normally.
If you use wireshark or tcpdump you should be able to check the MCS level of the packets and see that it's lower with fewer antennas.
Have fun,
Avery
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 5 lines · Avery Pennarun
From: Ben Greear <[email protected]>
Tested with CT firmware, but should work on standard firmware as well.
Quoted 7 lines
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled.
Signed-off-by Ben Greear <[email protected]>Signed-off-by Avery Pennarun <[email protected]>
I now moved ar->supp_*_chainmask initialisation to ath10k_mac_register(). Ben & Avery, is that for you two?
Full patch here:
https://github.com/kvalo/ath/commit/8230cdc4f434817d3c929292600fc3582e7dd3a8
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 15 lines · Kalle Valo
Quoted 5 lines · Avery Pennarun
From: Ben Greear <[email protected]>
Tested with CT firmware, but should work on standard firmware as well.
Quoted 7 lines
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled.
Signed-off-by Ben Greear <[email protected]>Signed-off-by Avery Pennarun <[email protected]>
Quoted 6 lines
I now moved ar->supp_*_chainmask initialisation to
ath10k_mac_register(). Ben & Avery, is that for you two?Full patch here:
https://github.com/kvalo/ath/commit/8230cdc4f434817d3c929292600fc3582e7dd3a8
Looks OK to me.
Thanks,
Ben
Quoted 1 line
Signature · 7 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Kalle Valo
AppliedQuoted 5 lines · Avery Pennarun
From: Ben Greear <[email protected]>
Tested with CT firmware, but should work on standard firmware as well.
Quoted 7 lines
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled.
Signed-off-by Ben Greear <[email protected]>Signed-off-by Avery Pennarun <[email protected]>
Thanks, applied.
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 6 lines · Ben Greear
Quoted 4 lines · Vu Hai NGUYEN
Thank you very much for the patch, I just had a question of a new bie: Your patch is for the branch of ath-next-test, not for the branch ath-master, right?
But even it is for ath-next-test, I can not apply it, there is a conflict, for example the first change of your patch (in file "core.h" which starts from line 472 but I found in the branch of ath-next-test that it must start from line 444 where there is u32dfs_block_radar_events; ) So I have to apply your patch manually (I look for the different and add it to the code) and then the result is quite good, I can see the Available and Configured Antennas from "iw list". Then I can also select the antenna thanks to the command "iw phyX set antenna" too. Sorry if I disturbing you for the question about applying the patch.
Quoted 6 lines
My patch was against my own tree which is a mix of 3.14 and an older version of
git://github.com/kvalo/ath.gitI do not have time right now to re-do the patch, but next time I get some time I will fix the patch to apply to ath.git. If someone else wants to do it first, I will not complain :)
If you send patches agains some out-of-tree version of ath10k, PLEASE state that clearly. I now wasted time trying to apply the patch, before I read your reply.
The best (=easiest for me) is to base patches on master branch of my ath.git tree.
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k