Ethernet bug at Upstream-v3.15-rcx on Lager.
Subsystems (3)
Hi Sergei
I am Hiep from JINZAI SOLUTION (a Japanese Company).
Now, I am testing a upstream-v3.15-rc2 on Lager for Renesas RSO. I found a problem about Ethernet Driver so I would like to report to you. The problem is losing data when sending data by UDP:
- From Lager board to PC:
BANDWIDTH from 10M to 70M are good, but they suddenly down 51.2
Mbits/sec at 80M
and 57.8 Mbits/sec at 90 M and 64.2 Mbits/sec at 100M.
- From PC to Lager board:
Some time when the message of "sh-eth r8a7790-ether eth0: Receive
FIFO Overflow" occurs,
some of datagrams will be lost as the logs show below:
「$ iperf -c 172.16.1.36 -u -b 90M
.....
[ 3] Server Report:
[ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.000 ms 36/76923 (0.047%)
.....
# iperf -s -u
[ ID] Interval Transfer Bandwidth Jitter
Lost/Total Datagrams
sh-eth r8a7790-ether eth0: Receive FIFO Overflow
[ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.001 ms
36/76923 (0.047%)
Please review it when you have time.
Bests Regards,
Cao Minh Hiep.
Hello.
Quoted 9 lines · カオ ミン ヒェップ
I am Hiep from JINZAI SOLUTION (a Japanese Company).
Now, I am testing a upstream-v3.15-rc2 on Lager for Renesas RSO. I found a problem about Ethernet Driver so I would like to report to you. The problem is losing data when sending data by UDP:- From Lager board to PC:
BANDWIDTH from 10M to 70M are good, but they suddenly down 51.2
Mbits/sec at 80Mand 57.8 Mbits/sec at 90 M and 64.2 Mbits/sec at 100M.
Do you mean 'iperf' tests here?
Quoted 17 lines
- From PC to Lager board:
Some time when the message of "sh-eth r8a7790-ether eth0: Receive FIFO
Overflow" occurs,some of datagrams will be lost as the logs show below: 「$ iperf -c 172.16.1.36 -u -b 90M ..... [ 3] Server Report: [ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.000 ms 36/76923(0.047%)
.....
# iperf -s -u
[ ID] Interval Transfer Bandwidth Jitter Lost/Total
Datagrams
sh-eth r8a7790-ether eth0: Receive FIFO Overflow
[ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.001 ms 36/76923
(0.047%)
Quoted 1 line
Please review it when you have time.
Please try this patch:
http://marc.info/?l=linux-netdev&m=139602519809181
Quoted 2 lines
Bests Regards,
Cao Minh Hiep.
WBR, Sergei
Hi Sergei
Thanks for your replying!
Quoted 10 lines · Sergei Shtylyov
Hello.
Quoted 5 lines · カオ ミン ヒェップ
I am Hiep from JINZAI SOLUTION (a Japanese Company).
Now, I am testing a upstream-v3.15-rc2 on Lager for Renesas RSO. I found a problem about Ethernet Driver so I would like to report to you.
The problem is losing data when sending data by UDP:
Quoted 6 lines
Quoted 4 lines
- From Lager board to PC:
BANDWIDTH from 10M to 70M are good, but they suddenly down 51.2
Mbits/sec at 80Mand 57.8 Mbits/sec at 90 M and 64.2 Mbits/sec at 100M.Do you mean 'iperf' tests here?
Yes, I used 'iperf' tool to test here.
And the results of test these test-cases on upstream-v3.15-rc5 as show below:
79.9 Mbits/sec at 80M, 81.5 Mbits/sec at 90 M and 75.1 Mbits/sec at 100M.
Quoted 22 lines
Quoted 21 lines
- From PC to Lager board:
Some time when the message of "sh-eth r8a7790-ether eth0: Receive
FIFO
Overflow" occurs,some of datagrams will be lost as the logs show below: 「$ iperf -c 172.16.1.36 -u -b 90M ..... [ 3] Server Report: [ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.000 ms36/76923
(0.047%)
.....
# iperf -s -u
[ ID] Interval Transfer Bandwidth Jitter
Lost/Total
Datagrams
sh-eth r8a7790-ether eth0: Receive FIFO Overflow
[ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.001 ms
36/76923
(0.047%)
Quoted 6 lines
Quoted 1 line
Please review it when you have time.
Please try this patch:
I have tested this patch on v3.15.0-rc5-00077-g14186fe, and results are the message of
"sh-eth r8a7790-ether eth0: Receive FIFO Overflow" has disappeared and sending datagrams is good.
(Bandwidth 10M to 100M: Test with 5/5 times by script and by hand are good)
Bests Regards.
Hiep.
Hi Hiep-san,
Quoted 11 lines · カオ ミン ヒェップ
Quoted 7 lines
Quoted 2 lines
Please review it when you have time.
Please try this patch:
I have tested this patch on v3.15.0-rc5-00077-g14186fe, and results are the message of "sh-eth r8a7790-ether eth0: Receive FIFO Overflow" has disappeared and sending datagrams is good. (Bandwidth 10M to 100M: Test with 5/5 times by script and by hand are good)
It's nice!
So, I hope the patch is merged in upstream. However, the patch's change log mentioned r8a7790 only. The r8a7791's ethernet controller also has this bit.
To Ben,
So, would you update your patch and resubmit it?
Best regards,
Yoshihiro Shimoda
Quoted 15 lines · Yoshihiro Shimoda
Hi Hiep-san,
Quoted 11 lines · カオ ミン ヒェップ
Quoted 7 lines
Quoted 2 lines
Please review it when you have time.
Please try this patch:
I have tested this patch on v3.15.0-rc5-00077-g14186fe, and results are the message of "sh-eth r8a7790-ether eth0: Receive FIFO Overflow" has disappeared and sending datagrams is good. (Bandwidth 10M to 100M: Test with 5/5 times by script and by hand are good)
Quoted 4 lines
It's nice!
So, I hope the patch is merged in upstream. However, the patch's change log mentioned r8a7790 only. The r8a7791's ethernet controller also has this bit.
The bit update covers both of them as the r8a7790 and r8a7791 both share the same configuration structure.
I re-sent the patch but didn't find your email post until after I had sent it, otherwise I would have mentioned your testing specifically. In future it would be helpful if you could do the following
- Mention driver by name in the subject line
- Search the list for previous mentions and reply to that/those threads.
Signature · 2 lines
Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius
Hi Ben,
Quoted 24 lines · Ben Dooks
Quoted 15 lines · Yoshihiro Shimoda
Hi Hiep-san,
Quoted 11 lines · カオ ミン ヒェップ
Quoted 7 lines
Quoted 2 lines
Please review it when you have time.
Please try this patch:
I have tested this patch on v3.15.0-rc5-00077-g14186fe, and results are the message of "sh-eth r8a7790-ether eth0: Receive FIFO Overflow" has disappeared and sending datagrams is good. (Bandwidth 10M to 100M: Test with 5/5 times by script and by hand are good)
Quoted 4 lines
It's nice!
So, I hope the patch is merged in upstream. However, the patch's change log mentioned r8a7790 only. The r8a7791's ethernet controller also has this bit.The bit update covers both of them as the r8a7790 and r8a7791 both share the same configuration structure.
Quoted 7 lines
I re-sent the patch but didn't find your email post until after I had sent it, otherwise I would have mentioned your testing specifically. In future it would be helpful if you could do the following
- Mention driver by name in the subject line
- Search the list for previous mentions and reply to that/those threads.
Thank you very much for the comment and your v2 patch! I understood it.
Best regards,
Yoshihiro Shimoda