Skip to contentSkip to conversation

ARM: atmel: sama5d3xek: convert to generic board

PATCH New Bo Shen 3 participants 11 messages Apr 24, 2014 – May 26, 2014 Arm/Microchip (AT91) SoC support

lore
Share & tools
lore

Bo Shen

author
#0 lore raw

PATCH 1/4 ARM: atmel: sama5d3xek: convert to generic board

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

---

 include/configs/sama5d3xek.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/sama5d3xek.h +2 -0
index 516be85..20a5f6e 100644
@@ -34,6 +34,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT		/* Device Tree support */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
 
Signature · 1 line
1.8.5.2
author
#1 lore raw

PATCH 2/4 ARM: atmel: sama5d3_xplained: convert to generic board

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

---

 include/configs/sama5d3_xplained.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/sama5d3_xplained.h +2 -0
index 91cc7d8..07e0a68 100644
@@ -28,6 +28,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT		/* Device Tree support */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
 
Signature · 1 line
1.8.5.2
#2 lore raw

PATCH 2/4 ARM: atmel: sama5d3_xplained: convert to generic board

Dear Bo Shen,

Quoted 7 lines · Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

Quoted 5 lines

---
include/configs/sama5d3_xplained.h | 2 ++

1 file changed, 2 insertions(+)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann

author
#3 lore raw

PATCH 3/4 ARM: atmel: at91sam9m10g45ek: convert to generic board

In reply to Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

---

 include/configs/at91sam9m10g45ek.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/at91sam9m10g45ek.h +2 -0
index ccfda71..7a3c9b5 100644
@@ -34,6 +34,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
Signature · 1 line
1.8.5.2
#4 lore raw

PATCH 3/4 ARM: atmel: at91sam9m10g45ek: convert to generic board

Quoted 8 lines · Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

Best Regards,
Josh Wu

Quoted 18 lines

---

  include/configs/at91sam9m10g45ek.h | 2 ++
  1 file changed, 2 insertions(+)
include/configs/at91sam9m10g45ek.h +2 -0
index ccfda71..7a3c9b5 100644
@@ -34,6 +34,8 @@
  #define CONFIG_CMD_BOOTZ
  #define CONFIG_OF_LIBFDT
 
+#define CONFIG_SYS_GENERIC_BOARD
+
  /* general purpose I/O */
  #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
  #define CONFIG_AT91_GPIO
#5 lore raw

PATCH 3/4 ARM: atmel: at91sam9m10g45ek: convert to generic board

In reply to Bo Shen

Dear Bo Shen,

Quoted 7 lines · Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

Quoted 6 lines

---
include/configs/at91sam9m10g45ek.h | 2 ++

1 file changed, 2 insertions(+)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann

author
#6 lore raw

PATCH 4/4 ARM: atmel: at91sam9x5ek: convert to generic board

In reply to Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

---

 include/configs/at91sam9x5ek.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/at91sam9x5ek.h +2 -0
index f0a6757..5fc00af 100644
@@ -30,6 +30,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
Signature · 1 line
1.8.5.2
#7 lore raw

PATCH 4/4 ARM: atmel: at91sam9x5ek: convert to generic board

Quoted 8 lines · Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

Tested on at91sam9x35ek board.

Best Regards,
Josh Wu

Quoted 18 lines

---

  include/configs/at91sam9x5ek.h | 2 ++
  1 file changed, 2 insertions(+)
include/configs/at91sam9x5ek.h +2 -0
index f0a6757..5fc00af 100644
@@ -30,6 +30,8 @@
  #define CONFIG_CMD_BOOTZ
  #define CONFIG_OF_LIBFDT
 
+#define CONFIG_SYS_GENERIC_BOARD
+
  /* general purpose I/O */
  #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
  #define CONFIG_AT91_GPIO
#8 lore raw

PATCH 4/4 ARM: atmel: at91sam9x5ek: convert to generic board

In reply to Bo Shen

Dear Bo Shen,

Quoted 7 lines · Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

Quoted 6 lines

---
include/configs/at91sam9x5ek.h | 2 ++

1 file changed, 2 insertions(+)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann

#9 lore raw

PATCH 1/4 ARM: atmel: sama5d3xek: convert to generic board

In reply to Bo Shen

Hi, Voice

Quoted 9 lines · Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

---

Best Regards,
Josh Wu

Quoted 17 lines
  include/configs/sama5d3xek.h | 2 ++
  1 file changed, 2 insertions(+)
include/configs/sama5d3xek.h +2 -0
index 516be85..20a5f6e 100644
@@ -34,6 +34,8 @@
  #define CONFIG_CMD_BOOTZ
  #define CONFIG_OF_LIBFDT		/* Device Tree support */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
  /* general purpose I/O */
  #define CONFIG_AT91_GPIO
 
#10 lore raw

PATCH 1/4 ARM: atmel: sama5d3xek: convert to generic board

In reply to Bo Shen

Dear Bo Shen,

Quoted 7 lines · Bo Shen

Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot:

"Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed."

Quoted 6 lines

---
include/configs/sama5d3xek.h | 2 ++

1 file changed, 2 insertions(+)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bie?mann