Skip to contentSkip to conversation

tc filter using MASKs in mark

LARTC ArcosCom Linux User 2 participants 4 messages Aug 23, 2007 – Aug 24, 2007

lore
Share & tools
lore
#0 lore raw

Hi,
I'm having a problem with filtering marked packet with tc.

I'm trying to run this:

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 8 handle 0x7/0x000f fw classid 1:8

But the response is:

Illegal "handle"

Typing the handle without masked mark is working, but I have a configuration were I need 2 mark types and I'm using masks:
Multiple outgoing interfaces (using 0xf000 mask to know the ip route
filter to allow specific interface for the outcoming traffic).
QoS (using 0x000f) to know the destination class for the flow.

Perhaps I have an incorrect syntax typing the masked handle, but I don't find any information about how to type correctly the masked handle with "tc filter" and I'm trying an "ip analogous" syntax.

The ip/tc utils versions I'm using are 2.6.20.

Anybody could help me with this "syntax problem"?

Thanks

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw
Quoted 23 lines · ArcosCom Linux User

Hi,
I'm having a problem with filtering marked packet with tc.

I'm trying to run this:

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 8 handle 0x7/0x000f fw classid 1:8

But the response is:

Illegal "handle"

Typing the handle without masked mark is working, but I have a configuration were I need 2 mark types and I'm using masks:
Multiple outgoing interfaces (using 0xf000 mask to know the ip route
filter to allow specific interface for the outcoming traffic).
QoS (using 0x000f) to know the destination class for the flow.

Perhaps I have an incorrect syntax typing the masked handle, but I don't find any information about how to type correctly the masked handle with "tc filter" and I'm trying an "ip analogous" syntax.

Quoted 5 lines

The ip/tc utils versions I'm using are 2.6.20.

Anybody could help me with this "syntax problem"?

Thanks

I think the fw classifier does not support masks. However, you can also use u32 filter to match marks, and it does support matching with mask. AFAIK, the support for matching marks have to be enabled in the kernel.

CONFIG_CLS_U32_MARK=y

And the syntax is like this:

tc filter add dev imq0 protocol ip prio 8 parent 1:0 u32 match mark \
0x7 0x000f flowid 1:8

Regards,
-MM
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#2 lore raw
In reply to ArcosCom Linux User

Thanks Martin.

¿This FLAG is available with 2.6.18 kernel version?

I'm using a distro kernel and is as stable that I don't want to upgrade it.

Thanks again.

Regards

Quoted 41 lines · Martin Milata
Quoted 23 lines · ArcosCom Linux User

Hi,
I'm having a problem with filtering marked packet with tc.

I'm trying to run this:

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 8 handle 0x7/0x000f fw classid 1:8

But the response is:

Illegal "handle"

Typing the handle without masked mark is working, but I have a configuration were I need 2 mark types and I'm using masks:
Multiple outgoing interfaces (using 0xf000 mask to know the ip route
filter to allow specific interface for the outcoming traffic).
QoS (using 0x000f) to know the destination class for the flow.

Perhaps I have an incorrect syntax typing the masked handle, but I don't find any information about how to type correctly the masked handle with "tc filter" and I'm trying an "ip analogous" syntax.

Quoted 5 lines

The ip/tc utils versions I'm using are 2.6.20.

Anybody could help me with this "syntax problem"?

Thanks

I think the fw classifier does not support masks. However, you can also use u32 filter to match marks, and it does support matching with mask. AFAIK, the support for matching marks have to be enabled in the kernel.

CONFIG_CLS_U32_MARK=y

And the syntax is like this:

tc filter add dev imq0 protocol ip prio 8 parent 1:0 u32 match mark \
0x7 0x000f flowid 1:8

Quoted 7 lines

Regards,
-MM
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#3 lore raw
In reply to ArcosCom Linux User

Answered by myself:

$ cat config-2.6.18-8.1.8.1.el5_ArcosCom | grep "CLS_U32"
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y

Thanks again.

Quoted 63 lines · ArcosCom Linux User

Thanks Martin.

¿This FLAG is available with 2.6.18 kernel version?

I'm using a distro kernel and is as stable that I don't want to upgrade it.

Thanks again.

Regards

Quoted 42 lines · Martin Milata
Quoted 24 lines · ArcosCom Linux User

Hi,
I'm having a problem with filtering marked packet with tc.

I'm trying to run this:

/sbin/tc filter add dev imq0 parent 1:0 protocol ip prio 8 handle 0x7/0x000f fw classid 1:8

But the response is:

Illegal "handle"

Typing the handle without masked mark is working, but I have a configuration were I need 2 mark types and I'm using masks:
Multiple outgoing interfaces (using 0xf000 mask to know the ip route
filter to allow specific interface for the outcoming traffic).
QoS (using 0x000f) to know the destination class for the flow.

Perhaps I have an incorrect syntax typing the masked handle, but I don't
find any information about how to type correctly the masked handle with "tc filter" and I'm trying an "ip analogous" syntax.

Quoted 5 lines

The ip/tc utils versions I'm using are 2.6.20.

Anybody could help me with this "syntax problem"?

Thanks

I think the fw classifier does not support masks. However, you can also use u32 filter to match marks, and it does support matching with mask. AFAIK, the support for matching marks have to be enabled in the kernel.

CONFIG_CLS_U32_MARK=y

And the syntax is like this:

tc filter add dev imq0 protocol ip prio 8 parent 1:0 u32 match mark \
0x7 0x000f flowid 1:8

Quoted 7 lines

Regards,
-MM
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Quoted 5 lines

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc