board/freescale: Move CRC32 offset in NXID v1 data format
PATCH 1/1 board/freescale: Move CRC32 offset in NXID v1 data format
According to AN3638, CRC of NXID v1 is at the end of the 256-byte I2C memory. The wrong CRC32 offset prevents Uboot from reading system information from EEPROM. No NXID v0 is being used on Freescale boards.
Signed-off-by Ebony Zhu <[email protected]>
--- board/freescale/common/sys_eeprom.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
board/freescale/common/sys_eeprom.c +4 -3
@@ -21,7 +21,7 @@/* some boards with non-256-bytes EEPROM have special define */ /* for MAX_NUM_PORTS in board-specific file */ #ifndef MAX_NUM_PORTS -#define MAX_NUM_PORTS 23 +#define MAX_NUM_PORTS 16#endif #define NXID_VERSION 1#endif
@@ -58,8 +58,9 @@ static struct __attribute__ ((__packed__)) eeprom {u8 res_1[21 ];/* 0x2b - 0x3f Reserved */ u8 mac_count;/* 0x40 Number of MAC addresses */ u8 mac_flag;/* 0x41 MAC table flags */ -u8 mac[MAX_NUM_PORTS ][6 ];/* 0x42 - x MAC addresses */ -u32 crc;/* x+1 CRC32 checksum */ +u8 mac[MAX_NUM_PORTS ][6 ];/* 0x42 - 0xa1 MAC addresses */ +u8 res_2[90 ];/* 0xa2 - 0xfb Reserved */ +u32 crc;/* 0xfc - 0xff CRC32 checksum */ #endif } e;
Signature · 1 line
1.8.1.4
PATCH 1/1 board/freescale: Move CRC32 offset in NXID v1 data format
Quoted 7 lines · Ebony Zhu
According to AN3638, CRC of NXID v1 is at the end of the 256-byte I2C memory. The wrong CRC32 offset prevents Uboot from reading system information from EEPROM. No NXID v0 is being used on Freescale boards.
Signed-off-by Ebony Zhu <[email protected]>---
Applied to u-boot-mpc85xx/master.
York