Skip to contentSkip to conversation

Problem Building DHCP into image

DISCUSSION Dr. Markus Eich 3 participants 5 messages May 22, 2014 – May 23, 2014 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Dear all,

I try to build a yocto image using the following receipe

http://pastebin.com/SyW3MZrL

The build config is

Build Configuration:

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "overo"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5.1"
TUNE_FEATURES     = "armv7a vfp neon"
TARGET_FPU        = "vfp-neon"
meta
meta-yocto        = "dora:19745990465b37107142c5464008ca9f7959cc0b"
meta-oe
meta-networking   = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ros          = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
meta-overo        = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
meta-dfki         = "master:d6156057fc7adc1585ec28505f63633e981f66d3"

The problem is building the dhcp part, i.e.

IMAGE_INSTALL += " \
    dhcp\

"

using bitbake dhcp runs fine, but

bitbake my image (see pastbin) results in

| Configuring iftop.
| Collected errors:
|  * opkg_install_cmd: Cannot install package dhcp.
| WARNING: /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from
|   opkg-cl ${ipkg_args} install ${package_to_install}
| ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)

ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. No currently running tasks (5619 of 5621)

Summary: 1 task failed:
/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any ideas?

Cheers,

Markus

Signature · 35 lines
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
 
 Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
 
 Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   [email protected]

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3
 -----------------------------------------------------------------------
#1 lore raw
Quoted 28 lines · Dr. Markus Eich

Dear all,

I try to build a yocto image using the following receipe

http://pastebin.com/SyW3MZrL

The build config is

Build Configuration:

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "overo"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5.1"
TUNE_FEATURES     = "armv7a vfp neon"
TARGET_FPU        = "vfp-neon"
meta
meta-yocto        = "dora:19745990465b37107142c5464008ca9f7959cc0b"
meta-oe
meta-networking   = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ros          = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
meta-overo        = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
meta-dfki         = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
Quoted 5 lines

The problem is building the dhcp part, i.e.

IMAGE_INSTALL += " \
     dhcp\

"

I think you probably want dhcp-server

Quoted 31 lines

using bitbake dhcp runs fine, but

bitbake my image (see pastbin) results in

| Configuring iftop.
| Collected errors:
|  * opkg_install_cmd: Cannot install package dhcp.
| WARNING: /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from
|   opkg-cl ${ipkg_args} install ${package_to_install}
| ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)

ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. No currently running tasks (5619 of 5621)

Summary: 1 task failed:
/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any ideas?

Cheers,

Markus

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 4 lines · Dr. Markus Eich

Maybe I should start with what I intend to do (sorry, I am newbie in yocto)

The image I have runs fine with my network connection. It only cannot get the DNS resolving working. When connect to my board, I have to use

Quoted 8 lines

dhclient once manually. I want to do this using the systemd configuration. So I need to install the service somehow at start.

Checking the dhcp_4.2.5-P1.bbappend receipe I found

SYSTEMD_AUTO_ENABLE_dhcp-client = "disable"

how can I make my receipe to start dhcp client via a systemd service?

This question surely belongs on the mailing list, where everyone can benefit from the discussion (and someone who actually knows/likes systemd can answer)

Quoted 71 lines

Am 22.05.2014 17:34, schrieb Gary Thomas:

Quoted 68 lines · Dr. Markus Eich
Quoted 28 lines

Dear all,

I try to build a yocto image using the following receipe

http://pastebin.com/SyW3MZrL

The build config is

Build Configuration:

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "overo"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5.1"
TUNE_FEATURES     = "armv7a vfp neon"
TARGET_FPU        = "vfp-neon"
meta
meta-yocto        = "dora:19745990465b37107142c5464008ca9f7959cc0b"
meta-oe
meta-networking   = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ros          = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
meta-overo        = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
meta-dfki         = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
Quoted 5 lines

The problem is building the dhcp part, i.e.

IMAGE_INSTALL += " \
     dhcp\

"

I think you probably want dhcp-server

Quoted 30 lines

using bitbake dhcp runs fine, but

bitbake my image (see pastbin) results in

| Configuring iftop.
| Collected errors:
|  * opkg_install_cmd: Cannot install package dhcp.
| WARNING: /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from
|   opkg-cl ${ipkg_args} install ${package_to_install}
| ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)

ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. No currently running tasks (5619 of 5621)

Summary: 1 task failed:
/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any ideas?

Cheers,

Markus

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#4 lore raw
In reply to Dr. Markus Eich

Hello Markus,

By running:
bitbake dhcp
you actually will run the dhcp recipe and all tasks that goes into it (that will create packages, among other things). By adding IMAGE_INSTALL, you try to add a certain package into the build.
I will recommend to use CORE_IMAGE_EXTRA_INSTALL anyhow.
Now, the dhcp recipe will build the following packages:
dhcp-server, dhcp-server-config, dhcp-client, dhcp-relay, etc.
I believe that you want to add one of this to your image (server, client, etc).

Regards,
Cristian Iorga
YP
Intel Corporation

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Thursday, May 22, 2014 6:23 PM
To: [email protected]
Subject: [poky] Problem Building DHCP into image

Dear all,

I try to build a yocto image using the following receipe

http://pastebin.com/SyW3MZrL

The build config is

Build Configuration:

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "overo"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5.1"
TUNE_FEATURES     = "armv7a vfp neon"
TARGET_FPU        = "vfp-neon"
meta
meta-yocto        = "dora:19745990465b37107142c5464008ca9f7959cc0b"
meta-oe
meta-networking   = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ros          = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
meta-overo        = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
meta-dfki         = "master:d6156057fc7adc1585ec28505f63633e981f66d3"

The problem is building the dhcp part, i.e.

IMAGE_INSTALL += " \
     dhcp\

"

using bitbake dhcp runs fine, but

bitbake my image (see pastbin) results in

| Configuring iftop.
| Collected errors:
|  * opkg_install_cmd: Cannot install package dhcp.
| WARNING: 

/home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from
| opkg-cl ${ipkg_args} install ${package_to_install}
| ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb,
do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. No currently running tasks (5619 of 5621)

Summary: 1 task failed:
/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any ideas?

Cheers,

Markus

--
Dr.-Ing. Markus Eich

Senior Researcher
Marine Inspection Robotics
Space Robotics

Besuchsadresse der Nebengeschäftstelle:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 5
28359 Bremen, Germany

Postadresse der Hauptgeschäftsstelle Standort Bremen:
DFKI GmbH
Robotics Innovation Center Robert-Hooke-Straße 1
28359 Bremen, Germany

Tel.: +49 421 178 45-4105
Zentrale: +49 421 178 45-0
Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
E-Mail: [email protected]

Weitere Informationen: http://www.dfki.de/robotik
-----------------------------------------------------------------------
Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff
Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313
Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
USt-Id.Nr.: DE 148646973
Steuernummer: 19/673/0060/3
-----------------------------------------------------------------------

--
_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

#5 lore raw

Thank you that did the trick. I have now installed dhclient on the image.

using

INSTALL +="dhcp-client"

But I somehow cannot enable it in systemd.

on the target machine I have lots of .service scripts in

/lib/systemd/system

but all the dhcp services are missing. I have found that there is a recipe

dhcp_4.2.5-P1.bbappend

in meta-openembedded/meta-systemd/oe-core/recipes-connectivity/dhcp

which uses

do_install_append() {
    install -d ${D}${systemd_unitdir}/system
    install -m 0644 ${WORKDIR}/dhcpd.service ${D}${systemd_unitdir}/system
    install -m 0644 ${WORKDIR}/dhclient.service 
${D}${systemd_unitdir}/system
    install -m 0644 ${WORKDIR}/dhcrelay.service 

${D}${systemd_unitdir}/system
}

but it seems that it is not installed. How can I tell my recipe to add the corresponding services?

Cheers,

Markus

Am 23.05.2014 15:21, schrieb Iorga, Cristian:

Quoted 132 lines

Hello Markus,

By running:
bitbake dhcp
you actually will run the dhcp recipe and all tasks that goes into it (that will create packages, among other things). By adding IMAGE_INSTALL, you try to add a certain package into the build.
I will recommend to use CORE_IMAGE_EXTRA_INSTALL anyhow.
Now, the dhcp recipe will build the following packages:
dhcp-server, dhcp-server-config, dhcp-client, dhcp-relay, etc.
I believe that you want to add one of this to your image (server, client, etc).

Regards,
Cristian Iorga
YP
Intel Corporation

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Thursday, May 22, 2014 6:23 PM
To: [email protected]
Subject: [poky] Problem Building DHCP into image

Dear all,

I try to build a yocto image using the following receipe

http://pastebin.com/SyW3MZrL

The build config is

Build Configuration:

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "overo"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5.1"
TUNE_FEATURES     = "armv7a vfp neon"
TARGET_FPU        = "vfp-neon"
meta
meta-yocto        = "dora:19745990465b37107142c5464008ca9f7959cc0b"
meta-oe
meta-networking   = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ros          = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
meta-overo        = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
meta-dfki         = "master:d6156057fc7adc1585ec28505f63633e981f66d3"

The problem is building the dhcp part, i.e.

IMAGE_INSTALL += " \
      dhcp\

"

using bitbake dhcp runs fine, but

bitbake my image (see pastbin) results in

| Configuring iftop.
| Collected errors:
|  * opkg_install_cmd: Cannot install package dhcp.
| WARNING:

/home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from
| opkg-cl ${ipkg_args} install ${package_to_install}
| ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb,
do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. No currently running tasks (5619 of 5621)

Summary: 1 task failed:
/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Any ideas?

Cheers,

Markus

--
Dr.-Ing. Markus Eich

Senior Researcher
Marine Inspection Robotics
Space Robotics

Besuchsadresse der Nebengeschäftstelle:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 5
28359 Bremen, Germany

Postadresse der Hauptgeschäftsstelle Standort Bremen:
DFKI GmbH
Robotics Innovation Center Robert-Hooke-Straße 1
28359 Bremen, Germany

Tel.: +49 421 178 45-4105
Zentrale: +49 421 178 45-0
Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
E-Mail: [email protected]

Weitere Informationen: http://www.dfki.de/robotik
-----------------------------------------------------------------------
Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff
Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313
Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
USt-Id.Nr.: DE 148646973
Steuernummer: 19/673/0060/3
-----------------------------------------------------------------------

--
_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Signature · 35 lines
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
 
 Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
 
 Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   [email protected]

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3
 -----------------------------------------------------------------------