arm: shmobile: r8a7791: add USB3.0 node to r8a7791.dtsi
Subsystems (2)
PATCH 2/2 arm: shmobile: r8a7791: add USB3.0 node to r8a7791.dtsi
Signed-off-by Yoshihiro Shimoda <[email protected]>
--- arch/arm/boot/dts/r8a7791.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/boot/dts/r8a7791.dtsi +10 -0
@@ -906,4 +906,14 @@ #size-cells = <0>; status = "disabled"; }; + + xhci: xhci at ee000000 { + compatible = "renesas,xhci-r8a7791"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; + phys = <&usbphy 1 1>; + phy-names = "usb"; + status = "disabled"; + }; };
Signature · 1 line
1.7.9.5
PATCH 2/2 arm: shmobile: r8a7791: add USB3.0 node to r8a7791.dtsi
Quoted 14 lines · Yoshihiro Shimoda
Signed-off-by Yoshihiro Shimoda <[email protected]>--- arch/arm/boot/dts/r8a7791.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)arch/arm/boot/dts/r8a7791.dtsi +1
-0@@ -906,4 +906,14 @@ #size-cells = <0>; status = "disabled"; }; +
arch/arm/boot/dts/r8a7791.dtsi line 919
Quoted 10 lines
arch/arm/boot/dts/r8a7791.dtsi +9
-0+ xhci: xhci at ee000000 { + compatible = "renesas,xhci-r8a7791"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; + phys = <&usbphy 1 1>; + phy-names = "usb"; + status = "disabled"; + }; };
I assume that Sergei's comments regarding the r8a7790 version of this change are equally relevant here.