pinctrl: sunxi: Fix level triggered interrupt support
Subsystems (2)
v2 cover pinctrl: sunxi: Fix level triggered interrupt support
Hi All,
Here is v2 of my patch-series to fix the level triggered interrupt support for sunxi pinctrl. I've decided to make this a separate series now, rather then keep posting it as part of the sdio oob irq series for easier tracking.
Note this series is based on top of pinctrl-next + Maxmime's "[PATCH v2 0/5] pinctrl: sunxi: Add A31 external interrupts support" series, since the 2 series conflict I thought it would be best to just do my series on top.
Changes since v1:
-Dropped the pinctrl: sunxi: create irq/pin mapping during init patch,
as this is in pinctrl-next now
-Added "pinctrl: sunxi: Fix sunxi_irq_cfg_reg not working for irqs >= 8"
patch, this fixes a regression caused by Maxmime's set and should probably be squashed into Maxime's "pinctrl: sunxi: Implement multiple interrupt banks support" patch
-Dropped the setting of the irq_chip name from:
"pinctrl: sunxi: Add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip"
-Use irq_request_resources callback in:
"pinctrl: sunxi: Move setting of mux to irq type from unmask to request_resources"
-Rebased on top of Maxime's series
Regards,
Hans
PATCH v2 1/5 pinctrl: sunxi: Fix sunxi_irq_cfg_reg not working for irqs >= 8
Rename SUNXI_IRQ_NUMBER to IRQ_PER_BANK as it no longer represents the total number of irqs and use it instead of the number of irqs-per-reg when calculating the bank to use for the various sunxi_irq_xxx_reg functions. This fixes sunxi_irq_cfg_reg using the wrong bank for irqs >= 8.
Also sunxi_irq_cfg_reg_from_bank returns the address of pio_int_cfg0, add an offset to the register returned for irqs living in the pio_int_cfg[1-3].
--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 12 ++++++------ drivers/pinctrl/sunxi/pinctrl-sunxi.h | 11 ++++++----- 2 files changed, 12 insertions(+), 11 deletions(-)
drivers/pinctrl/sunxi/pinctrl-sunxi.c +6 -6
@@ -655,9 +655,9 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)int irqoffset;chained_irq_enter (chip, desc); -for_each_set_bit (irqoffset, &val,SUNXI_IRQ_NUMBER ) { +for_each_set_bit (irqoffset, &val,IRQ_PER_BANK ) {int pin_irq =irq_find_mapping (pctl->domain, - bank *SUNXI_IRQ_NUMBER + irqoffset); + bank *IRQ_PER_BANK + irqoffset);generic_handle_irq (pin_irq); }chained_irq_exit (chip, desc);
@@ -726,7 +726,7 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)while (func->name) {/* Create interrupt mapping while we're at it */ if (!strcmp (func->name,"irq" )) { -int irqnum = func->irqnum + func->irqbank *SUNXI_IRQ_NUMBER ; +int irqnum = func->irqnum + func->irqbank *IRQ_PER_BANK ; pctl->irq_array[irqnum] = pin->pin.number; }
@@ -800,7 +800,7 @@ int sunxi_pinctrl_init(struct platform_device *pdev, pctl->desc = desc; pctl->irq_array =devm_kcalloc (&pdev->dev, -SUNXI_IRQ_NUMBER * pctl->desc->irq_banks, +IRQ_PER_BANK * pctl->desc->irq_banks,sizeof (*pctl->irq_array),GFP_KERNEL );if (!pctl->irq_array)
@@ -908,7 +908,7 @@ int sunxi_pinctrl_init(struct platform_device *pdev, } pctl->domain =irq_domain_add_linear (node, - pctl->desc->irq_banks *SUNXI_IRQ_NUMBER , + pctl->desc->irq_banks *IRQ_PER_BANK , &irq_domain_simple_ops,NULL );if (!pctl->domain) {
@@ -917,7 +917,7 @@ int sunxi_pinctrl_init(struct platform_device *pdev, goto clk_error; } -for (i =0 ; i < (pctl->desc->irq_banks *SUNXI_IRQ_NUMBER ); i++) { +for (i =0 ; i < (pctl->desc->irq_banks *IRQ_PER_BANK ); i++) {int irqno =irq_create_mapping (pctl->domain, i); irq_set_chip_and_handler(irqno, &sunxi_pinctrl_irq_chip,
drivers/pinctrl/sunxi/pinctrl-sunxi.h +6 -5
@@ -53,7 +53,7 @@#define PULL_PINS_BITS 2#define PULL_PINS_MASK 0x03 -#define SUNXI_IRQ_NUMBER 32 +#define IRQ_PER_BANK 32#define IRQ_CFG_REG 0x200#define IRQ_CFG_IRQ_PER_REG 8
@@ -235,9 +235,10 @@ static inline u32 sunxi_irq_cfg_reg_from_bank(u8 bank)static inline u32 sunxi_irq_cfg_reg (u16 irq) { -u8 bank = irq /IRQ_CFG_IRQ_PER_REG ; +u8 bank = irq /IRQ_PER_BANK ; +u32 offset = ((irq %IRQ_PER_BANK ) /IRQ_CFG_IRQ_PER_REG ) *0x04 ; -return sunxi_irq_cfg_reg_from_bank (bank); +return sunxi_irq_cfg_reg_from_bank (bank) + offset; }static inline u32 sunxi_irq_cfg_offset (u16 irq)
@@ -253,7 +254,7 @@ static inline u32 sunxi_irq_ctrl_reg_from_bank(u8 bank)static inline u32 sunxi_irq_ctrl_reg (u16 irq) { -u8 bank = irq /IRQ_CTRL_IRQ_PER_REG ; +u8 bank = irq /IRQ_PER_BANK ;return sunxi_irq_ctrl_reg_from_bank (bank); }
@@ -271,7 +272,7 @@ static inline u32 sunxi_irq_status_reg_from_bank(u8 bank)static inline u32 sunxi_irq_status_reg (u16 irq) { -u8 bank = irq /IRQ_STATUS_IRQ_PER_REG ; +u8 bank = irq /IRQ_PER_BANK ;return sunxi_irq_status_reg_from_bank (bank); }
Signature · 1 line
2.0.0
PATCH v2 1/5 pinctrl: sunxi: Fix sunxi_irq_cfg_reg not working for irqs >= 8
Quoted 9 lines · Hans de Goede
Rename
SUNXI_IRQ_NUMBERtoIRQ_PER_BANKas it no longer represents the total number of irqs and use it instead of the number of irqs-per-reg when calculating the bank to use for the varioussunxi_irq_xxx_regfunctions. This fixessunxi_irq_cfg_regusing the wrong bank for irqs >= 8.Also
sunxi_irq_cfg_reg_from_bankreturns the address ofpio_int_cfg0, add an offset to the register returned for irqs living in the pio_int_cfg[1-3].Signed-off-by Hans de Goede <[email protected]>
Good catch, I've squashed it into my serie with minor modifications (remove the cfg_reg_from_bank that doesn't make any sense).
Thanks,
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140602/52ee3706/attachment.sig>
PATCH v2 1/5 pinctrl: sunxi: Fix sunxi_irq_cfg_reg not working for irqs >= 8
Quoted 6 lines · Maxime Ripard
Quoted 5 lines · Hans de Goede
Rename
SUNXI_IRQ_NUMBERtoIRQ_PER_BANKas it no longer represents the total number of irqs and use it instead of the number of irqs-per-reg when calculating the bank to use for the varioussunxi_irq_xxx_regfunctions. This fixessunxi_irq_cfg_regusing the wrong bank for irqs >= 8.
Quoted 7 lines
Quoted 4 lines
Also
sunxi_irq_cfg_reg_from_bankreturns the address ofpio_int_cfg0, add an offset to the register returned for irqs living in the pio_int_cfg[1-3].Signed-off-by Hans de Goede <[email protected]>Good catch, I've squashed it into my serie with minor modifications (remove the
cfg_reg_from_bankthat doesn't make any sense).
I'm more than a little confused by your and Hans parallell patch series to sunxi now :-)
I will try to apply your patches first, then Hans' as you're the maintainer of this driver.
Yours,
Linus Walleij
PATCH v2 1/5 pinctrl: sunxi: Fix sunxi_irq_cfg_reg not working for irqs >= 8
Hi,
Quoted 13 lines · Linus Walleij
Quoted 11 lines · Maxime Ripard
Quoted 9 lines · Hans de Goede
Rename
SUNXI_IRQ_NUMBERtoIRQ_PER_BANKas it no longer represents the total number of irqs and use it instead of the number of irqs-per-reg when calculating the bank to use for the varioussunxi_irq_xxx_regfunctions. This fixessunxi_irq_cfg_regusing the wrong bank for irqs >= 8.Also
sunxi_irq_cfg_reg_from_bankreturns the address ofpio_int_cfg0, add an offset to the register returned for irqs living in the pio_int_cfg[1-3].Signed-off-by Hans de Goede <[email protected]>
Quoted 8 lines
Quoted 2 lines
Good catch, I've squashed it into my serie with minor modifications (remove the
cfg_reg_from_bankthat doesn't make any sense).I'm more than a little confused by your and Hans parallell patch series to sunxi now :-)
I will try to apply your patches first, then Hans' as you're the maintainer of this driver.
Thanks, that was the intention all along, I've based my patch series on top Maxime's series to avoid conflicts.
Note please wait with applying my series, Maxime had some review comments, so I'm going to do a new version soon.
Regards,
Hans
PATCH v2 2/5 pinctrl: sunxi: Add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
In reply to Hans de GoedeFrom: Chen-Yu Tsai <[email protected]>
The sunxi pinctrl irq chip driver does not support wakeup at the moment. Adding IRQCHIP_SKIP_SET_WAKE lets the irqs work with drivers using wakeup.
--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 1 + 1 file changed, 1 insertion(+)
drivers/pinctrl/sunxi/pinctrl-sunxi.c +1 -0
@@ -630,6 +630,7 @@ static struct irq_chip sunxi_pinctrl_irq_chip = { .irq_mask = sunxi_pinctrl_irq_mask, .irq_unmask = sunxi_pinctrl_irq_unmask, .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags = IRQCHIP_SKIP_SET_WAKE, };static void sunxi_pinctrl_irq_handler (unsigned irq,struct irq_desc *desc)
Signature · 1 line
2.0.0
PATCH v2 2/5 pinctrl: sunxi: Add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
Quoted 8 lines · Hans de Goede
From: Chen-Yu Tsai <[email protected]>
The sunxi pinctrl irq chip driver does not support wakeup at the moment. Adding
IRQCHIP_SKIP_SET_WAKElets the irqs work with drivers using wakeup.Signed-off-by Chen-Yu Tsai <[email protected]>Signed-off-by Hans de Goede <[email protected]>
Thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140602/7a94d4d1/attachment.sig>
PATCH v2 3/5 pinctrl: sunxi: Move setting of mux to irq type from unmask to request_resources
In reply to Hans de GoedeWith level triggered interrupt mask / unmask will get called for each interrupt, doing the somewhat expensive mux setting on each unmask thus is not a good idea. Instead add a request_resources callback and do it there.
--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
drivers/pinctrl/sunxi/pinctrl-sunxi.c +14 -8
@@ -531,6 +531,19 @@ static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset)return irq_find_mapping (pctl->domain, desc->irqnum); } +static int sunxi_pinctrl_irq_request_resources (struct irq_data *d) +{ +struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); +struct sunxi_desc_function *func; + + func =sunxi_pinctrl_desc_find_function_by_pin (pctl, + pctl->irq_array[d->hwirq],"irq" ); + +/* Change muxing to INT mode */ +sunxi_pmx_set (pctl->pctl_dev, pctl->irq_array[d->hwirq], func->muxval); + +return 0 ; +}static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type)
@@ -603,19 +616,11 @@ static void sunxi_pinctrl_irq_mask(struct irq_data *d)static void sunxi_pinctrl_irq_unmask (struct irq_data *d) {struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); -struct sunxi_desc_function *func;u32 reg =sunxi_irq_ctrl_reg (d->hwirq);u8 idx =sunxi_irq_ctrl_offset (d->hwirq);unsigned long flags;u32 val; - func =sunxi_pinctrl_desc_find_function_by_pin (pctl, - pctl->irq_array[d->hwirq], -"irq" ); - -/* Change muxing to INT mode */ -sunxi_pmx_set (pctl->pctl_dev, pctl->irq_array[d->hwirq], func->muxval); -spin_lock_irqsave (&pctl->lock, flags);/* Unmask the IRQ */
@@ -629,6 +634,7 @@ static struct irq_chip sunxi_pinctrl_irq_chip = { .irq_ack = sunxi_pinctrl_irq_ack, .irq_mask = sunxi_pinctrl_irq_mask, .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, .irq_set_type = sunxi_pinctrl_irq_set_type, .flags = IRQCHIP_SKIP_SET_WAKE, };
Signature · 1 line
2.0.0
PATCH v2 3/5 pinctrl: sunxi: Move setting of mux to irq type from unmask to request_resources
Quoted 14 lines · Hans de Goede
With level triggered interrupt mask / unmask will get called for each interrupt, doing the somewhat expensive mux setting on each unmask thus is not a good idea. Instead add a
request_resourcescallback and do it there.Signed-off-by Hans de Goede <[email protected]>--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)drivers/pinctrl/sunxi/pinctrl-sunxi.c +0
-0
drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset) · line 540
Quoted 10 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +7
-0@@ -531,6 +531,19 @@ static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset)return irq_find_mapping (pctl->domain, desc->irqnum); } +static int sunxi_pinctrl_irq_request_resources (struct irq_data *d) +{ +struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); +struct sunxi_desc_function *func; + + func =sunxi_pinctrl_desc_find_function_by_pin (pctl, + pctl->irq_array[d->hwirq],"irq" );
I know you're just moving code here, but we should add a check for func being !NULL here, otherwise, the kernel is going to blow up at the next line.
And since gpio_to_irq might not be called before the request_irq, you might be in such a case.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140602/f95a9644/attachment.sig>
PATCH v2 3/5 pinctrl: sunxi: Move setting of mux to irq type from unmask to request_resources
Hi,
Quoted 30 lines · Maxime Ripard
Quoted 14 lines · Hans de Goede
With level triggered interrupt mask / unmask will get called for each interrupt, doing the somewhat expensive mux setting on each unmask thus is not a good idea. Instead add a
request_resourcescallback and do it there.Signed-off-by Hans de Goede <[email protected]>--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)drivers/pinctrl/sunxi/pinctrl-sunxi.c +0
-0drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset) · line 540
Quoted 10 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +7
-0@@ -531,6 +531,19 @@ static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset)return irq_find_mapping (pctl->domain, desc->irqnum); } +static int sunxi_pinctrl_irq_request_resources (struct irq_data *d) +{ +struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); +struct sunxi_desc_function *func; + + func =sunxi_pinctrl_desc_find_function_by_pin (pctl, + pctl->irq_array[d->hwirq],"irq" );I know you're just moving code here, but we should add a check for func being !NULL here, otherwise, the kernel is going to blow up at the next line.
Quoted 2 lines
And since
gpio_to_irqmight not be called before therequest_irq, you might be in such a case.
Ok, will do for v3 of the patch-set.
Regards,
Hans
PATCH v2 4/5 pinctrl: sunxi: Properly handle level triggered gpio interrupts
In reply to Hans de GoedeFor level triggered gpio interrupts we need to use handle_fasteoi_irq, like we do with the irq-sunxi-nmi driver. This is necessary to give threaded interrupt handlers a chance to actuall clear the source of the interrupt (which may involve sleeping waiting for i2c / spi / mmc transfers), before acknowledging the interrupt.
--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 57 +++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 16 deletions(-)
drivers/pinctrl/sunxi/pinctrl-sunxi.c +41 -16
@@ -31,6 +31,11 @@#include "../core.h" #include "pinctrl-sunxi.h" +static void sunxi_pinctrl_irq_ack (struct irq_data *d); +static void sunxi_pinctrl_irq_mask (struct irq_data *d); +static void sunxi_pinctrl_irq_unmask (struct irq_data *d); +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type); +static struct sunxi_pinctrl_group *sunxi_pinctrl_find_group_by_name (struct sunxi_pinctrl *pctl,const char *group) {
@@ -545,10 +550,29 @@ static int sunxi_pinctrl_irq_request_resources(struct irq_data *d)return 0 ; } -static int sunxi_pinctrl_irq_set_type (struct irq_data *d, -unsigned int type) +static struct irq_chip sunxi_pinctrl_edge_irq_chip = { + .irq_ack = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags =IRQCHIP_SKIP_SET_WAKE , +}; + +static struct irq_chip sunxi_pinctrl_level_irq_chip = { + .irq_eoi = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags =IRQCHIP_SKIP_SET_WAKE |IRQCHIP_EOI_THREADED + |IRQCHIP_EOI_IF_HANDLED , +}; + +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type) {struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); + struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);u32 reg =sunxi_irq_cfg_reg (d->hwirq);u8 index =sunxi_irq_cfg_offset (d->hwirq);unsigned long flags;
@@ -575,6 +599,14 @@ static int sunxi_pinctrl_irq_set_type(struct irq_data *d,return -EINVAL ; } +if (type &IRQ_TYPE_LEVEL_MASK ) { + d->chip = &sunxi_pinctrl_level_irq_chip; + desc->handle_irq = handle_fasteoi_irq; + }else { + d->chip = &sunxi_pinctrl_edge_irq_chip; + desc->handle_irq = handle_edge_irq; + } +spin_lock_irqsave (&pctl->lock, flags); regval =readl (pctl->membase + reg);
@@ -630,15 +662,6 @@ static void sunxi_pinctrl_irq_unmask(struct irq_data *d)spin_unlock_irqrestore (&pctl->lock, flags); } -static struct irq_chip sunxi_pinctrl_irq_chip = { - .irq_ack = sunxi_pinctrl_irq_ack, - .irq_mask = sunxi_pinctrl_irq_mask, - .irq_unmask = sunxi_pinctrl_irq_unmask, - .irq_request_resources = sunxi_pinctrl_irq_request_resources, - .irq_set_type = sunxi_pinctrl_irq_set_type, - .flags =IRQCHIP_SKIP_SET_WAKE , -}; -static void sunxi_pinctrl_irq_handler (unsigned irq,struct irq_desc *desc) {struct irq_chip *chip =irq_get_chip (irq);
@@ -655,9 +678,6 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc) reg =sunxi_irq_status_reg_from_bank (bank); val =readl (pctl->membase + reg); -/* Clear all interrupts */ -writel (val, pctl->membase + reg); -if (val) {int irqoffset;
@@ -927,12 +947,17 @@ int sunxi_pinctrl_init(struct platform_device *pdev,for (i =0 ; i < (pctl->desc->irq_banks *IRQ_PER_BANK ); i++) {int irqno =irq_create_mapping (pctl->domain, i); -irq_set_chip_and_handler (irqno, &sunxi_pinctrl_irq_chip, - handle_simple_irq); +irq_set_chip_and_handler (irqno, &sunxi_pinctrl_edge_irq_chip, + handle_edge_irq);irq_set_chip_data (irqno, pctl); };for (i =0 ; i < pctl->desc->irq_banks; i++) { +/* Mask and clear all IRQs before registering a handler */ +writel (0 , pctl->membase +sunxi_irq_ctrl_reg_from_bank (i)); +writel (0xffffffff , + pctl->membase +sunxi_irq_status_reg_from_bank (i)); +irq_set_chained_handler (pctl->irq[i], sunxi_pinctrl_irq_handler);irq_set_handler_data (pctl->irq[i], pctl);
Signature · 1 line
2.0.0
PATCH v2 4/5 pinctrl: sunxi: Properly handle level triggered gpio interrupts
Quoted 41 lines · Hans de Goede
For level triggered gpio interrupts we need to use
handle_fasteoi_irq, like we do with the irq-sunxi-nmi driver. This is necessary to give threaded interrupt handlers a chance to actuall clear the source of the interrupt (which may involve sleeping waiting for i2c / spi / mmc transfers), before acknowledging the interrupt.Signed-off-by Hans de Goede <[email protected]>--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 57 +++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 16 deletions(-)drivers/pinctrl/sunxi/pinctrl-sunxi.c +13
-2@@ -31,6 +31,11 @@#include "../core.h" #include "pinctrl-sunxi.h" +static void sunxi_pinctrl_irq_ack (struct irq_data *d); +static void sunxi_pinctrl_irq_mask (struct irq_data *d); +static void sunxi_pinctrl_irq_unmask (struct irq_data *d); +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type); +static struct sunxi_pinctrl_group *sunxi_pinctrl_find_group_by_name (struct sunxi_pinctrl *pctl,const char *group) {@@ -545,10 +550,29 @@ static int sunxi_pinctrl_irq_request_resources(struct irq_data *d)return 0 ; } -static int sunxi_pinctrl_irq_set_type (struct irq_data *d, -unsigned int type) +static struct irq_chip sunxi_pinctrl_edge_irq_chip = { + .irq_ack = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags =IRQCHIP_SKIP_SET_WAKE , +};
drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_irq_request_resources(struct irq_data *d) · line 570
Quoted 10 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +10
-0+ +static struct irq_chip sunxi_pinctrl_level_irq_chip = { + .irq_eoi = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags =IRQCHIP_SKIP_SET_WAKE |IRQCHIP_EOI_THREADED + |IRQCHIP_EOI_IF_HANDLED , +};
Maybe we can just forward declare these two structures, instead of all their functions.
Quoted 9 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +3
-0+ +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type) {struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); + struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);u32 reg =sunxi_irq_cfg_reg (d->hwirq);u8 index =sunxi_irq_cfg_offset (d->hwirq);unsigned long flags;
drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_irq_set_type(struct irq_data *d, · line 607
Quoted 9 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +6
-0@@ -575,6 +599,14 @@ static int sunxi_pinctrl_irq_set_type(struct irq_data *d,return -EINVAL ; } +if (type &IRQ_TYPE_LEVEL_MASK ) { + d->chip = &sunxi_pinctrl_level_irq_chip; + desc->handle_irq = handle_fasteoi_irq; + }else { + d->chip = &sunxi_pinctrl_edge_irq_chip; + desc->handle_irq = handle_edge_irq;
irq_set_chip_and_handler?
Quoted 54 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +9
-14+ } +spin_lock_irqsave (&pctl->lock, flags); regval =readl (pctl->membase + reg);@@ -630,15 +662,6 @@ static void sunxi_pinctrl_irq_unmask(struct irq_data *d)spin_unlock_irqrestore (&pctl->lock, flags); } -static struct irq_chip sunxi_pinctrl_irq_chip = { - .irq_ack = sunxi_pinctrl_irq_ack, - .irq_mask = sunxi_pinctrl_irq_mask, - .irq_unmask = sunxi_pinctrl_irq_unmask, - .irq_request_resources = sunxi_pinctrl_irq_request_resources, - .irq_set_type = sunxi_pinctrl_irq_set_type, - .flags =IRQCHIP_SKIP_SET_WAKE , -}; -static void sunxi_pinctrl_irq_handler (unsigned irq,struct irq_desc *desc) {struct irq_chip *chip =irq_get_chip (irq);@@ -655,9 +678,6 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc) reg =sunxi_irq_status_reg_from_bank (bank); val =readl (pctl->membase + reg); -/* Clear all interrupts */ -writel (val, pctl->membase + reg); -if (val) {int irqoffset;@@ -927,12 +947,17 @@ int sunxi_pinctrl_init(struct platform_device *pdev,for (i =0 ; i < (pctl->desc->irq_banks *IRQ_PER_BANK ); i++) {int irqno =irq_create_mapping (pctl->domain, i); -irq_set_chip_and_handler (irqno, &sunxi_pinctrl_irq_chip, - handle_simple_irq); +irq_set_chip_and_handler (irqno, &sunxi_pinctrl_edge_irq_chip, + handle_edge_irq);irq_set_chip_data (irqno, pctl); };for (i =0 ; i < pctl->desc->irq_banks; i++) { +/* Mask and clear all IRQs before registering a handler */ +writel (0 , pctl->membase +sunxi_irq_ctrl_reg_from_bank (i)); +writel (0xffffffff , + pctl->membase +sunxi_irq_status_reg_from_bank (i)); +irq_set_chained_handler (pctl->irq[i], sunxi_pinctrl_irq_handler);irq_set_handler_data (pctl->irq[i], pctl);Signature · 1 line
2.0.0
Looks fine otherwise, thanks.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140603/49077e41/attachment.sig>
PATCH v2 4/5 pinctrl: sunxi: Properly handle level triggered gpio interrupts
Hi,
Quoted 47 lines · Maxime Ripard
Quoted 46 lines · Hans de Goede
For level triggered gpio interrupts we need to use
handle_fasteoi_irq, like we do with the irq-sunxi-nmi driver. This is necessary to give threaded interrupt handlers a chance to actuall clear the source of the interrupt (which may involve sleeping waiting for i2c / spi / mmc transfers), before acknowledging the interrupt.Signed-off-by Hans de Goede <[email protected]>--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 57 +++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 16 deletions(-)drivers/pinctrl/sunxi/pinctrl-sunxi.c +18
-2@@ -31,6 +31,11 @@#include "../core.h" #include "pinctrl-sunxi.h" +static void sunxi_pinctrl_irq_ack (struct irq_data *d); +static void sunxi_pinctrl_irq_mask (struct irq_data *d); +static void sunxi_pinctrl_irq_unmask (struct irq_data *d); +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type); +static struct sunxi_pinctrl_group *sunxi_pinctrl_find_group_by_name (struct sunxi_pinctrl *pctl,const char *group) {@@ -545,10 +550,29 @@ static int sunxi_pinctrl_irq_request_resources(struct irq_data *d)return 0 ; } -static int sunxi_pinctrl_irq_set_type (struct irq_data *d, -unsigned int type) +static struct irq_chip sunxi_pinctrl_edge_irq_chip = { + .irq_ack = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags =IRQCHIP_SKIP_SET_WAKE , +}; + +static struct irq_chip sunxi_pinctrl_level_irq_chip = { + .irq_eoi = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask,
Quoted 8 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_irq_request_resources(struct irq_data *d) · line 570
Quoted 5 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +5
-0+ .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_EOI_THREADED + | IRQCHIP_EOI_IF_HANDLED, +};Maybe we can just forward declare these two structures, instead of all their functions.
Variables cannot be forward declared, they can be declared extern, but last time I checked extern and static don't mix.
Quoted 13 lines
Quoted 13 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +3
-0+ +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type) {struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); + struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);u32 reg =sunxi_irq_cfg_reg (d->hwirq);u8 index =sunxi_irq_cfg_offset (d->hwirq);unsigned long flags;@@ -575,6 +599,14 @@ static int sunxi_pinctrl_irq_set_type(struct irq_data *d,return -EINVAL ; }
Quoted 8 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_irq_set_type(struct irq_data *d, · line 607
Quoted 6 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +6
-0+if (type &IRQ_TYPE_LEVEL_MASK ) { + d->chip = &sunxi_pinctrl_level_irq_chip; + desc->handle_irq = handle_fasteoi_irq; + }else { + d->chip = &sunxi_pinctrl_edge_irq_chip; + desc->handle_irq = handle_edge_irq;
irq_set_chip_and_handler?
Does a lookup of the irqdata which we already have here, and that lookup takes a lock which is already held here.
Quoted 43 lines
Quoted 43 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +4
-14+ } +spin_lock_irqsave (&pctl->lock, flags); regval =readl (pctl->membase + reg);@@ -630,15 +662,6 @@ static void sunxi_pinctrl_irq_unmask(struct irq_data *d)spin_unlock_irqrestore (&pctl->lock, flags); } -static struct irq_chip sunxi_pinctrl_irq_chip = { - .irq_ack = sunxi_pinctrl_irq_ack, - .irq_mask = sunxi_pinctrl_irq_mask, - .irq_unmask = sunxi_pinctrl_irq_unmask, - .irq_request_resources = sunxi_pinctrl_irq_request_resources, - .irq_set_type = sunxi_pinctrl_irq_set_type, - .flags =IRQCHIP_SKIP_SET_WAKE , -}; -static void sunxi_pinctrl_irq_handler (unsigned irq,struct irq_desc *desc) {struct irq_chip *chip =irq_get_chip (irq);@@ -655,9 +678,6 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc) reg =sunxi_irq_status_reg_from_bank (bank); val =readl (pctl->membase + reg); -/* Clear all interrupts */ -writel (val, pctl->membase + reg); -if (val) {int irqoffset;@@ -927,12 +947,17 @@ int sunxi_pinctrl_init(struct platform_device *pdev,for (i =0 ; i < (pctl->desc->irq_banks *IRQ_PER_BANK ); i++) {int irqno =irq_create_mapping (pctl->domain, i); -irq_set_chip_and_handler (irqno, &sunxi_pinctrl_irq_chip, - handle_simple_irq); +irq_set_chip_and_handler (irqno, &sunxi_pinctrl_edge_irq_chip, + handle_edge_irq);irq_set_chip_data (irqno, pctl); };
Quoted 14 lines
Quoted 10 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +5
-1for (i =0 ; i < pctl->desc->irq_banks; i++) { +/* Mask and clear all IRQs before registering a handler */ +writel (0 , pctl->membase +sunxi_irq_ctrl_reg_from_bank (i)); +writel (0xffffffff , + pctl->membase +sunxi_irq_status_reg_from_bank (i)); +irq_set_chained_handler (pctl->irq[i], sunxi_pinctrl_irq_handler);irq_set_handler_data (pctl->irq[i], pctl); --Quoted 2 lines
2.0.0
Looks fine otherwise, thanks.
Regards,
Hans
PATCH v2 4/5 pinctrl: sunxi: Properly handle level triggered gpio interrupts
Quoted 59 lines · Hans de Goede
Hi,
Quoted 47 lines · Maxime Ripard
Quoted 46 lines · Hans de Goede
For level triggered gpio interrupts we need to use
handle_fasteoi_irq, like we do with the irq-sunxi-nmi driver. This is necessary to give threaded interrupt handlers a chance to actuall clear the source of the interrupt (which may involve sleeping waiting for i2c / spi / mmc transfers), before acknowledging the interrupt.Signed-off-by Hans de Goede <[email protected]>--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 57 +++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 16 deletions(-)drivers/pinctrl/sunxi/pinctrl-sunxi.c +18
-2@@ -31,6 +31,11 @@#include "../core.h" #include "pinctrl-sunxi.h" +static void sunxi_pinctrl_irq_ack (struct irq_data *d); +static void sunxi_pinctrl_irq_mask (struct irq_data *d); +static void sunxi_pinctrl_irq_unmask (struct irq_data *d); +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type); +static struct sunxi_pinctrl_group *sunxi_pinctrl_find_group_by_name (struct sunxi_pinctrl *pctl,const char *group) {@@ -545,10 +550,29 @@ static int sunxi_pinctrl_irq_request_resources(struct irq_data *d)return 0 ; } -static int sunxi_pinctrl_irq_set_type (struct irq_data *d, -unsigned int type) +static struct irq_chip sunxi_pinctrl_edge_irq_chip = { + .irq_ack = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags =IRQCHIP_SKIP_SET_WAKE , +}; + +static struct irq_chip sunxi_pinctrl_level_irq_chip = { + .irq_eoi = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask,Quoted 8 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_irq_request_resources(struct irq_data *d) · line 570
Quoted 5 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +5
-0+ .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_EOI_THREADED + | IRQCHIP_EOI_IF_HANDLED, +};Maybe we can just forward declare these two structures, instead of all their functions.
Quoted 2 lines
Variables cannot be forward declared, they can be declared extern, but last time I checked extern and static don't mix.
Actually, you can. It's called a tentative definition, see
http://c0x.coding-guidelines.com/6.9.2.html and
http://c0x.coding-guidelines.com/6.2.2.html for the definition of internal linkage.
Maxime
Quoted 23 lines
Quoted 14 lines
Quoted 14 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +3
-0+ +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type) {struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); + struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);u32 reg =sunxi_irq_cfg_reg (d->hwirq);u8 index =sunxi_irq_cfg_offset (d->hwirq);unsigned long flags;@@ -575,6 +599,14 @@ static int sunxi_pinctrl_irq_set_type(struct irq_data *d,return -EINVAL ; }Quoted 8 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_irq_set_type(struct irq_data *d, · line 607
Quoted 6 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +6
-0+if (type &IRQ_TYPE_LEVEL_MASK ) { + d->chip = &sunxi_pinctrl_level_irq_chip; + desc->handle_irq = handle_fasteoi_irq; + }else { + d->chip = &sunxi_pinctrl_edge_irq_chip; + desc->handle_irq = handle_edge_irq;
irq_set_chip_and_handler?
Quoted 2 lines
Does a lookup of the irqdata which we already have here, and that lookup takes a lock which is already held here.
Ah, yes.
Thanks,
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140617/e3d07fb2/attachment.sig>
PATCH v2 4/5 pinctrl: sunxi: Properly handle level triggered gpio interrupts
Hi,
Quoted 60 lines · Maxime Ripard
Quoted 59 lines · Hans de Goede
Hi,
Quoted 55 lines · Maxime Ripard
Quoted 41 lines · Hans de Goede
For level triggered gpio interrupts we need to use
handle_fasteoi_irq, like we do with the irq-sunxi-nmi driver. This is necessary to give threaded interrupt handlers a chance to actuall clear the source of the interrupt (which may involve sleeping waiting for i2c / spi / mmc transfers), before acknowledging the interrupt.Signed-off-by Hans de Goede <[email protected]>--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 57 +++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 16 deletions(-)drivers/pinctrl/sunxi/pinctrl-sunxi.c +13
-2@@ -31,6 +31,11 @@#include "../core.h" #include "pinctrl-sunxi.h" +static void sunxi_pinctrl_irq_ack (struct irq_data *d); +static void sunxi_pinctrl_irq_mask (struct irq_data *d); +static void sunxi_pinctrl_irq_unmask (struct irq_data *d); +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type); +static struct sunxi_pinctrl_group *sunxi_pinctrl_find_group_by_name (struct sunxi_pinctrl *pctl,const char *group) {@@ -545,10 +550,29 @@ static int sunxi_pinctrl_irq_request_resources(struct irq_data *d)return 0 ; } -static int sunxi_pinctrl_irq_set_type (struct irq_data *d, -unsigned int type) +static struct irq_chip sunxi_pinctrl_edge_irq_chip = { + .irq_ack = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags =IRQCHIP_SKIP_SET_WAKE , +};drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_irq_request_resources(struct irq_data *d) · line 570
Quoted 10 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +10
-0+ +static struct irq_chip sunxi_pinctrl_level_irq_chip = { + .irq_eoi = sunxi_pinctrl_irq_ack, + .irq_mask = sunxi_pinctrl_irq_mask, + .irq_unmask = sunxi_pinctrl_irq_unmask, + .irq_request_resources = sunxi_pinctrl_irq_request_resources, + .irq_set_type = sunxi_pinctrl_irq_set_type, + .flags =IRQCHIP_SKIP_SET_WAKE |IRQCHIP_EOI_THREADED + |IRQCHIP_EOI_IF_HANDLED , +};Maybe we can just forward declare these two structures, instead of all their functions.
Quoted 7 lines
Quoted 2 lines
Variables cannot be forward declared, they can be declared extern, but last time I checked extern and static don't mix.
Actually, you can. It's called a tentative definition, see
http://c0x.coding-guidelines.com/6.9.2.html and
http://c0x.coding-guidelines.com/6.2.2.html for the definition of internal linkage.
Ah, I've been programming C since 1996, and I did not know about that :)
Good to have learned something new today. I'll do a v3 patch-set with this fixed (well a v4 really as I accidentally did a second v2, but lets be consistent and number the next one v3).
Regards,
Hans
Quoted 34 lines
Maxime
Quoted 23 lines
Quoted 14 lines
Quoted 14 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +3
-0+ +static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type) {struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); + struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);u32 reg =sunxi_irq_cfg_reg (d->hwirq);u8 index =sunxi_irq_cfg_offset (d->hwirq);unsigned long flags;@@ -575,6 +599,14 @@ static int sunxi_pinctrl_irq_set_type(struct irq_data *d,return -EINVAL ; }Quoted 8 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c static int sunxi_pinctrl_irq_set_type(struct irq_data *d, · line 607
Quoted 6 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +6
-0+if (type &IRQ_TYPE_LEVEL_MASK ) { + d->chip = &sunxi_pinctrl_level_irq_chip; + desc->handle_irq = handle_fasteoi_irq; + }else { + d->chip = &sunxi_pinctrl_edge_irq_chip; + desc->handle_irq = handle_edge_irq;
irq_set_chip_and_handler?Quoted 2 lines
Does a lookup of the irqdata which we already have here, and that lookup takes a lock which is already held here.
Ah, yes.
Thanks,
Maxime
PATCH v2 5/5 pinctrl: sunxi: Define enable / disable irq callbacks for level triggered irqs
In reply to Hans de GoedeSome drivers use disable_irq / enable_irq and do the work clearing the source in another thread instead of using a threaded interrupt handler.
The irqchip used not having irq_disable and irq_enable callbacks in this case, will lead to unnecessary spurious interrupts:
On a disable_irq in a chip without a handller for this, the irq core will remember the disable, but not actually call into the irqchip. With a level triggered interrupt (where the source has not been cleared) this will lead to an immediate retrigger, at which point the irq-core will mask the irq. So having an irq_disable callback in the irqchip will save us the interrupt firing a 2nd time for nothing.
Drivers using disable / enable_irq like this, will call enable_irq when they finally have cleared the interrupt source, without an enable_irq callback, this will turn into an unmask, at which point the irq will trigger immediately because when it was originally acked the level was still high, so the ack was a nop.
--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
drivers/pinctrl/sunxi/pinctrl-sunxi.c +27 -0
@@ -34,6 +34,7 @@static void sunxi_pinctrl_irq_ack (struct irq_data *d);static void sunxi_pinctrl_irq_mask (struct irq_data *d);static void sunxi_pinctrl_irq_unmask (struct irq_data *d); +static void sunxi_pinctrl_irq_ack_unmask (struct irq_data *d);static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type); static struct sunxi_pinctrl_group *
@@ -563,6 +564,10 @@ static struct irq_chip sunxi_pinctrl_level_irq_chip = { .irq_eoi = sunxi_pinctrl_irq_ack, .irq_mask = sunxi_pinctrl_irq_mask, .irq_unmask = sunxi_pinctrl_irq_unmask, +/* Define irq_enable / disable to avoid spurious irqs for drivers +* using these to suppress irqs while they clear the irq source */ + .irq_enable = sunxi_pinctrl_irq_ack_unmask, + .irq_disable = sunxi_pinctrl_irq_mask, .irq_request_resources = sunxi_pinctrl_irq_request_resources, .irq_set_type = sunxi_pinctrl_irq_set_type, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_EOI_THREADED
@@ -662,6 +667,28 @@ static void sunxi_pinctrl_irq_unmask(struct irq_data *d)spin_unlock_irqrestore (&pctl->lock, flags); } +static void sunxi_pinctrl_irq_ack_unmask (struct irq_data *d) +{ +struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); +u32 ctrl_reg =sunxi_irq_ctrl_reg (d->hwirq); +u8 ctrl_idx =sunxi_irq_ctrl_offset (d->hwirq); +u32 status_reg =sunxi_irq_status_reg (d->hwirq); +u8 status_idx =sunxi_irq_status_offset (d->hwirq); +unsigned long flags; +u32 val; + +spin_lock_irqsave (&pctl->lock, flags); + +/* Clear the IRQ */ +writel (1 << status_idx, pctl->membase + status_reg); + +/* Unmask the IRQ */ + val =readl (pctl->membase + ctrl_reg); +writel (val | (1 << ctrl_idx), pctl->membase + ctrl_reg); + +spin_unlock_irqrestore (&pctl->lock, flags); +} +static void sunxi_pinctrl_irq_handler (unsigned irq,struct irq_desc *desc) {struct irq_chip *chip =irq_get_chip (irq);
Signature · 1 line
2.0.0
PATCH v2 5/5 pinctrl: sunxi: Define enable / disable irq callbacks for level triggered irqs
Quoted 6 lines · Hans de Goede
Some drivers use
disable_irq/enable_irqand do the work clearing the source in another thread instead of using a threaded interrupt handler.The irqchip used not having
irq_disableandirq_enablecallbacks in this case, will lead to unnecessary spurious interrupts:
Quoted 6 lines
On a
disable_irqin a chip without a handller for this, the irq core will remember the disable, but not actually call into the irqchip. With a level triggered interrupt (where the source has not been cleared) this will lead to an immediate retrigger, at which point the irq-core will mask the irq. So having anirq_disablecallback in the irqchip will save us the interrupt firing a 2nd time for nothing.
Judging by the comments there, it seems more like a feature.
Quoted 5 lines
Drivers using disable /
enable_irqlike this, will callenable_irqwhen they finally have cleared the interrupt source, without anenable_irqcallback, this will turn into an unmask, at which point the irq will trigger immediately because when it was originally acked the level was still high, so the ack was a nop.
I don't think enable_irq offers any warranty regarding the state of the interrupt. It's up to the driver to clear the interrupts before calling enable_irq if it doesn't want any irrelevant/spurious interrupts.
Quoted 19 lines
Signed-off-by Hans de Goede <[email protected]>--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)drivers/pinctrl/sunxi/pinctrl-sunxi.c +1
-0@@ -34,6 +34,7 @@static void sunxi_pinctrl_irq_ack (struct irq_data *d);static void sunxi_pinctrl_irq_mask (struct irq_data *d);static void sunxi_pinctrl_irq_unmask (struct irq_data *d); +static void sunxi_pinctrl_irq_ack_unmask (struct irq_data *d);static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type); static struct sunxi_pinctrl_group *
drivers/pinctrl/sunxi/pinctrl-sunxi.c static struct irq_chip sunxi_pinctrl_level_irq_chip = { · line 568
Quoted 5 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +2
-0@@ -563,6 +564,10 @@ static struct irq_chip sunxi_pinctrl_level_irq_chip = { .irq_eoi = sunxi_pinctrl_irq_ack, .irq_mask = sunxi_pinctrl_irq_mask, .irq_unmask = sunxi_pinctrl_irq_unmask, +/* Define irq_enable / disable to avoid spurious irqs for drivers +* using these to suppress irqs while they clear the irq source */
What "drivers" are we talking about? I grepped for a while, and didn't any obvious candidates.
But again, I feel like if a driver wants to work outside of the usual interrupt workflow, it's up to the driver itself to know what it's doing.
Quoted 20 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +13
-0+ .irq_enable = sunxi_pinctrl_irq_ack_unmask, + .irq_disable = sunxi_pinctrl_irq_mask, .irq_request_resources = sunxi_pinctrl_irq_request_resources, .irq_set_type = sunxi_pinctrl_irq_set_type, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_EOI_THREADED@@ -662,6 +667,28 @@ static void sunxi_pinctrl_irq_unmask(struct irq_data *d)spin_unlock_irqrestore (&pctl->lock, flags); } +static void sunxi_pinctrl_irq_ack_unmask (struct irq_data *d) +{ +struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); +u32 ctrl_reg =sunxi_irq_ctrl_reg (d->hwirq); +u8 ctrl_idx =sunxi_irq_ctrl_offset (d->hwirq); +u32 status_reg =sunxi_irq_status_reg (d->hwirq); +u8 status_idx =sunxi_irq_status_offset (d->hwirq); +unsigned long flags; +u32 val; + +spin_lock_irqsave (&pctl->lock, flags);
drivers/pinctrl/sunxi/pinctrl-sunxi.c static void sunxi_pinctrl_irq_unmask(struct irq_data *d) · line 690
Quoted 10 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +10
-0+ +/* Clear the IRQ */ +writel (1 << status_idx, pctl->membase + status_reg); + +/* Unmask the IRQ */ + val =readl (pctl->membase + ctrl_reg); +writel (val | (1 << ctrl_idx), pctl->membase + ctrl_reg); + +spin_unlock_irqrestore (&pctl->lock, flags); +}
Please at least call sunxi_pinctrl_irq_ack andsunxi_pinctrl_irq_unmask if you're doing this.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140603/08da55c8/attachment.sig>
PATCH v2 5/5 pinctrl: sunxi: Define enable / disable irq callbacks for level triggered irqs
Hi,
Quoted 7 lines · Maxime Ripard
Quoted 6 lines · Hans de Goede
Some drivers use
disable_irq/enable_irqand do the work clearing the source in another thread instead of using a threaded interrupt handler.The irqchip used not having
irq_disableandirq_enablecallbacks in this case, will lead to unnecessary spurious interrupts:
Quoted 8 lines
Quoted 6 lines
On a
disable_irqin a chip without a handller for this, the irq core will remember the disable, but not actually call into the irqchip. With a level triggered interrupt (where the source has not been cleared) this will lead to an immediate retrigger, at which point the irq-core will mask the irq. So having anirq_disablecallback in the irqchip will save us the interrupt firing a 2nd time for nothing.Judging by the comments there, it seems more like a feature.
It is a feature in cases where the interrupt re-firing leading to the unmask is unlikely to happen, because then delaying the unmask saves a slow iowrite, for level triggered interrupts however, the re-fire is the likely case, so it is better to define a disable function.
Quoted 10 lines
Quoted 5 lines
Drivers using disable /
enable_irqlike this, will callenable_irqwhen they finally have cleared the interrupt source, without anenable_irqcallback, this will turn into an unmask, at which point the irq will trigger immediately because when it was originally acked the level was still high, so the ack was a nop.I don't think
enable_irqoffers any warranty regarding the state of the interrupt. It's up to the driver to clear the interrupts before callingenable_irqif it doesn't want any irrelevant/spurious interrupts.
Yes the driver must clear the source of the irq, but there is no way for the driver to do the irqchip ack, so it makes sense to do that in the irqchip enable function to avoid spurious irqs. Note that this is only done for level irqs, where the ack is a nop if the irq source is not cleared, so this cannot cause lost irqs.
Quoted 18 lines
Quoted 18 lines
Signed-off-by Hans de Goede <[email protected]>--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)drivers/pinctrl/sunxi/pinctrl-sunxi.c +1
-0@@ -34,6 +34,7 @@static void sunxi_pinctrl_irq_ack (struct irq_data *d);static void sunxi_pinctrl_irq_mask (struct irq_data *d);static void sunxi_pinctrl_irq_unmask (struct irq_data *d); +static void sunxi_pinctrl_irq_ack_unmask (struct irq_data *d);static int sunxi_pinctrl_irq_set_type (struct irq_data *d,unsigned int type);
Quoted 10 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c static struct irq_chip sunxi_pinctrl_level_irq_chip = { · line 568
Quoted 7 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +2
-0static struct sunxi_pinctrl_group *@@ -563,6 +564,10 @@ static struct irq_chip sunxi_pinctrl_level_irq_chip = { .irq_eoi = sunxi_pinctrl_irq_ack, .irq_mask = sunxi_pinctrl_irq_mask, .irq_unmask = sunxi_pinctrl_irq_unmask, +/* Define irq_enable / disable to avoid spurious irqs for drivers +* using these to suppress irqs while they clear the irq source */ What "drivers" are we talking about? I grepped for a while, and didn't any obvious candidates.
Any driver dealing with level irqs and not doing so using a threaded interrupt handler. Threaded interrupt handlers are relatively new, drivers dealing with i2c / spi / sdio busses with an oob irq, where clearing the irq involves a bus read/write which may sleep, are a lot older then threaded interrupt support. So the "design pattern" for these used to be to disable the irq in the handler, wakeup a tasklet / workqueue which does the work of handling + clearing the irq, and then re-enables it.
The example I've been specifically testing with is:
drivers/net/wireless/brcm80211/brcmfmac
Quoted 3 lines
But again, I feel like if a driver wants to work outside of the usual interrupt workflow, it's up to the driver itself to know what it's doing.
As said above, the scenario I'm trying to deal with here is quite normal for ie i2c drivers using an oob irq. There is no other way for them to deal with this, other then using a threaded interrupt handler, which in many cases would mean heavy restructuring of a driver which works fine as is.
Quoted 25 lines
Quoted 25 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +18
-0+ .irq_enable = sunxi_pinctrl_irq_ack_unmask, + .irq_disable = sunxi_pinctrl_irq_mask, .irq_request_resources = sunxi_pinctrl_irq_request_resources, .irq_set_type = sunxi_pinctrl_irq_set_type, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_EOI_THREADED@@ -662,6 +667,28 @@ static void sunxi_pinctrl_irq_unmask(struct irq_data *d)spin_unlock_irqrestore (&pctl->lock, flags); } +static void sunxi_pinctrl_irq_ack_unmask (struct irq_data *d) +{ +struct sunxi_pinctrl *pctl =irq_data_get_irq_chip_data (d); +u32 ctrl_reg =sunxi_irq_ctrl_reg (d->hwirq); +u8 ctrl_idx =sunxi_irq_ctrl_offset (d->hwirq); +u32 status_reg =sunxi_irq_status_reg (d->hwirq); +u8 status_idx =sunxi_irq_status_offset (d->hwirq); +unsigned long flags; +u32 val; + +spin_lock_irqsave (&pctl->lock, flags); + +/* Clear the IRQ */ +writel (1 << status_idx, pctl->membase + status_reg); + +/* Unmask the IRQ */
Quoted 8 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c static void sunxi_pinctrl_irq_unmask(struct irq_data *d) · line 690
Quoted 5 lines
drivers/pinctrl/sunxi/pinctrl-sunxi.c +5
-0+ val =readl (pctl->membase + ctrl_reg); +writel (val | (1 << ctrl_idx), pctl->membase + ctrl_reg); + +spin_unlock_irqrestore (&pctl->lock, flags); +}Please at least call
sunxi_pinctrl_irq_ackandsunxi_pinctrl_irq_unmaskif you're doing this.
Ok, I'll change this for the next version.
Regards,
Hans