Skip to contentSkip to conversation

crypto: Updated makefiles to add QAT

RFC PATCH In review Tadeusz Struk 2 participants 3 messages Jun 3, 2014

Subsystems (2)
Documentation Crypto API
lore
Share & tools
lore

Tadeusz Struk

author
#0 lore raw

RFC PATCH 4/4 crypto: Updated makefiles to add QAT

Update to makefiles etc.

Signed-off-by Tadeusz Struk <[email protected]>
---
 Documentation/ioctl/ioctl-number.txt | 1 +
 MAINTAINERS                          | 6 ++++++
 drivers/crypto/Kconfig               | 1 +
 drivers/crypto/Makefile              | 1 +
 firmware/Makefile                    | 1 +
 5 files changed, 10 insertions(+)
Documentation/ioctl/ioctl-number.txt +1 -0
index d7e43fa..7e240a7 100644
@@ -197,6 +197,7 @@ Code  Seq#(hex)	Include File		Comments
 					<mailto:[email protected]>
 'a'	all	linux/atm*.h, linux/sonet.h	ATM on linux
 					<http://lrcwww.epfl.ch/>
+'a'	00-0F	drivers/crypto/qat/qat_common/adf_cfg_common.h	conflict! qat driver
 'b'	00-FF				conflict! bit3 vme host bridge
 					<mailto:[email protected]>
 'c'	all	linux/cm4000_cs.h	conflict!
MAINTAINERS +6 -0
index 3467445..5482679 100644
@@ -7060,6 +7060,12 @@ M:	Robert Jarzmik <[email protected]>
 L:	[email protected]
 S:	Maintained
 
+QAT DRIVER
+M:      Tadeusz Struk <[email protected]>
+L:      [email protected]
+S:      Supported
+F:      drivers/crypto/qat/
+
 QIB DRIVER
 M:	Mike Marciniszyn <[email protected]>
 L:	[email protected]
drivers/crypto/Kconfig +1 -0
index f066fa2..1f20814 100644
@@ -418,4 +418,5 @@ config CRYPTO_DEV_MXS_DCP
 	  To compile this driver as a module, choose M here: the module
 	  will be called mxs-dcp.
 
+source "drivers/crypto/qat/Kconfig"
 endif # CRYPTO_HW
drivers/crypto/Makefile +1 -0
index 482f090..f996ed7 100644
@@ -23,3 +23,4 @@ obj-$(CONFIG_CRYPTO_DEV_S5P) += s5p-sss.o
 obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahara.o
 obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
 obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
+obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/
firmware/Makefile +1 -0
index cbb09ce..89ac80b 100644
@@ -135,6 +135,7 @@ fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
 fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
 fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
 fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
+fw-shipped-$(CONFIG_CRYPTO_DEV_QAT_DH895xCC) += qat_895xcc.bin
 
 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
Signature · 1 line
1.8.5.rc2.6.gc6f1b92.dirty
reviewer
#1 lore raw
Quoted 16 lines · Tadeusz Struk

Update to makefiles etc.

Signed-off-by Tadeusz Struk <[email protected]>
---
 Documentation/ioctl/ioctl-number.txt | 1 +
 MAINTAINERS                          | 6 ++++++
 drivers/crypto/Kconfig               | 1 +
 drivers/crypto/Makefile              | 1 +
 firmware/Makefile                    | 1 +
 5 files changed, 10 insertions(+)
drivers/crypto/Kconfig +0 -0
index f066fa2..1f20814 100644

drivers/crypto/Kconfig config CRYPTO_DEV_MXS_DCP · line 421

Quoted 4 lines
drivers/crypto/Kconfig +1 -0
@@ -418,4 +418,5 @@ config CRYPTO_DEV_MXS_DCP
 	  To compile this driver as a module, choose M here: the module
 	  will be called mxs-dcp.
 
+source "drivers/crypto/qat/Kconfig"

Missing that file ^^^^^^^^^^^^^^^^^^^

Quoted 1 line
drivers/crypto/Kconfig +0 -0
 endif # CRYPTO_HW
Signature · 1 line
~Randy
author
#2 lore raw
Quoted 3 lines · Randy Dunlap
Quoted 1 line

+source "drivers/crypto/qat/Kconfig"

Missing that file ^^^^^^^^^^^^^^^^^^^

Hi,
Something went wrong. I need to resend v2.
Thanks Randy