Skip to contentSkip to conversation

Hmm, possible bug in poky?

DISCUSSION Neuer User 3 participants 7 messages Jun 6, 2014

lore
Share & tools
lore

Neuer User

author
#0 lore raw

I get the following error:

WARNING: Failed to fetch URL file://defconfig, attempting MIRRORS if available
ERROR: Fetcher failure: Unable to find file file://defconfig anywhere. The paths that were searched were:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/poky
...
/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/arm

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30-linux4kix/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i/
/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/ /home/ubuntu/yocto/downloads/
ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'. Unable to fetch URL from any source.

Now, the directory:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

which is listed above, contains the "missing" file ("defconfig").

Hmm, strange...

Here are my recipes:

linux-cubox-i_3.10.30.inc:
------------------------------------
inherit kernel
require recipes-kernel/linux/linux-yocto.inc

SUMMARY = "Linaro Kernel 3.10.30 with additional machine specific patches"

SRCBRANCH ?= "linux-linaro-lsk-mx6"

FILESEXTRAPATHS_prepend += "${THISDIR}/${PN}-3.10.30:"

SRC_URI = "file://defconfig \
           file://videoin.cfg \
           file://networking.cfg \
           file://wlan.cfg \
           file://dm-crypt.cfg \
           file://no-caam.cfg \
           file://leds.cfg \
           file://mod-to-builtin.cfg \
           file://brcmfmac4330-sdio.bin \
           file://brcmfmac4330-sdio.txt \

"

do_configure_append () {
    cd ${S}
    mkdir firmware/brcm
    cp ../brcmfmac4330-sdio.bin ./firmware/brcm/
    cp ../brcmfmac4330-sdio.txt ./firmware/brcm/
}

COMPATIBLE_MACHINE = "(cubox-i)"

KERNEL_IMAGETYPE_cubox-i = "zImage" KERNEL_DEVICETREE_cubox-i = "imx6dl-cubox-i.dtb imx6q-cubox-i.dtb"

SRCREV_machine = "${SRCREV}"
------------------------------------

linux-cubox-i_3.10.30.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "592b2d941dc3ecb6335d6820757340ffb5a192c8" #SRCREV = "860304ab6e749777523f3714d18c4c7d39b728fa" LOCALVERSION = "-cubox-i+SolidRun+${SRCPV}"

SRC_URI += "git://github.com/SolidRun/linux-linaro-stable-mx6;branch=${SRCBRANCH}"
-------------------------------

linux-cubox-i_3.10.30-linux4kix.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "a4ed70040f9dfdcdd6546a85c0477ecd1030e065" LOCALVERSION = "-cubox-i+linux4kix+${SRCPV}"

SRC_URI += "git://github.com/linux4kix/linux-linaro-stable-mx6.git;branch=${SRCBRANCH}"
------------------------------------

#1 lore raw
Quoted 40 lines · Neuer User

I get the following error:

WARNING: Failed to fetch URL file://defconfig, attempting MIRRORS if available
ERROR: Fetcher failure: Unable to find file file://defconfig anywhere. The paths that were searched were:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/poky
...
/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/arm

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30-linux4kix/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i/
/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/ /home/ubuntu/yocto/downloads/
ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'. Unable to fetch URL from any source.

Now, the directory:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

which is listed above, contains the "missing" file ("defconfig").

Hmm, strange...

Here are my recipes:

linux-cubox-i_3.10.30.inc:
------------------------------------
inherit kernel
require recipes-kernel/linux/linux-yocto.inc

Quoted 5 lines

SUMMARY = "Linaro Kernel 3.10.30 with additional machine specific patches"

SRCBRANCH ?= "linux-linaro-lsk-mx6"

FILESEXTRAPATHS_prepend += "${THISDIR}/${PN}-3.10.30:"

Have you tried this variant ?

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-3.10.30:"

You need the := in the assignment to have it evaluate immediately and pick up the directory of your bbappend (who's subdir is the one that contains the defconfig).

Bruce

Quoted 54 lines
SRC_URI = "file://defconfig \
            file://videoin.cfg \
            file://networking.cfg \
            file://wlan.cfg \
            file://dm-crypt.cfg \
            file://no-caam.cfg \
            file://leds.cfg \
            file://mod-to-builtin.cfg \
            file://brcmfmac4330-sdio.bin \
            file://brcmfmac4330-sdio.txt \

"

do_configure_append () {
     cd ${S}
     mkdir firmware/brcm
     cp ../brcmfmac4330-sdio.bin ./firmware/brcm/
     cp ../brcmfmac4330-sdio.txt ./firmware/brcm/
}

COMPATIBLE_MACHINE = "(cubox-i)"

KERNEL_IMAGETYPE_cubox-i = "zImage" KERNEL_DEVICETREE_cubox-i = "imx6dl-cubox-i.dtb imx6q-cubox-i.dtb"

SRCREV_machine = "${SRCREV}"
------------------------------------

linux-cubox-i_3.10.30.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "592b2d941dc3ecb6335d6820757340ffb5a192c8" #SRCREV = "860304ab6e749777523f3714d18c4c7d39b728fa" LOCALVERSION = "-cubox-i+SolidRun+${SRCPV}"

SRC_URI += "git://github.com/SolidRun/linux-linaro-stable-mx6;branch=${SRCBRANCH}"
-------------------------------

linux-cubox-i_3.10.30-linux4kix.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "a4ed70040f9dfdcdd6546a85c0477ecd1030e065" LOCALVERSION = "-cubox-i+linux4kix+${SRCPV}"

SRC_URI += "git://github.com/linux4kix/linux-linaro-stable-mx6.git;branch=${SRCBRANCH}"
------------------------------------

author
#2 lore raw

Hi Bruce

Thanks for the hint. I changed it, but the result is the same.

Strange is really that it shows the directory as being searched through but does not find the file that's contained?!

Also, there are two "main" recipes, which both include the inc file. This one throws warnings, but works:

linux-cubox-i_3.10.30.bb

This one throws warnings and then the error shown:

linux-cubox-i_3.10.30-linux4kix.bb

Am I doing it right (now with the :=), or is there something fundamentally wrong with the two recipes and the include file?

Michael

Am 06.06.2014 16:40, schrieb Bruce Ashfield:

Quoted 122 lines · Neuer User
Quoted 47 lines

I get the following error:

WARNING: Failed to fetch URL file://defconfig, attempting MIRRORS if available
ERROR: Fetcher failure: Unable to find file file://defconfig anywhere. The paths that were searched were:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/poky

...

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/arm

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30-linux4kix/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/
/home/ubuntu/yocto/downloads/
ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'. Unable to fetch URL from any source.

Now, the directory:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

which is listed above, contains the "missing" file ("defconfig").

Hmm, strange...

Here are my recipes:

linux-cubox-i_3.10.30.inc:
------------------------------------
inherit kernel
require recipes-kernel/linux/linux-yocto.inc

Quoted 6 lines

SUMMARY = "Linaro Kernel 3.10.30 with additional machine specific patches"

SRCBRANCH ?= "linux-linaro-lsk-mx6"

FILESEXTRAPATHS_prepend += "${THISDIR}/${PN}-3.10.30:"

Have you tried this variant ?

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-3.10.30:"

You need the := in the assignment to have it evaluate immediately and pick up the directory of your bbappend (who's subdir is the one that contains the defconfig).

Bruce

Quoted 55 lines
SRC_URI = "file://defconfig \
            file://videoin.cfg \
            file://networking.cfg \
            file://wlan.cfg \
            file://dm-crypt.cfg \
            file://no-caam.cfg \
            file://leds.cfg \
            file://mod-to-builtin.cfg \
            file://brcmfmac4330-sdio.bin \
            file://brcmfmac4330-sdio.txt \

"

do_configure_append () {
     cd ${S}
     mkdir firmware/brcm
     cp ../brcmfmac4330-sdio.bin ./firmware/brcm/
     cp ../brcmfmac4330-sdio.txt ./firmware/brcm/
}

COMPATIBLE_MACHINE = "(cubox-i)"

KERNEL_IMAGETYPE_cubox-i = "zImage" KERNEL_DEVICETREE_cubox-i = "imx6dl-cubox-i.dtb imx6q-cubox-i.dtb"

SRCREV_machine = "${SRCREV}"
------------------------------------

linux-cubox-i_3.10.30.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "592b2d941dc3ecb6335d6820757340ffb5a192c8" #SRCREV = "860304ab6e749777523f3714d18c4c7d39b728fa" LOCALVERSION = "-cubox-i+SolidRun+${SRCPV}"

SRC_URI += "git://github.com/SolidRun/linux-linaro-stable-mx6;branch=${SRCBRANCH}"
-------------------------------

linux-cubox-i_3.10.30-linux4kix.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "a4ed70040f9dfdcdd6546a85c0477ecd1030e065" LOCALVERSION = "-cubox-i+linux4kix+${SRCPV}"

SRC_URI += "git://github.com/linux4kix/linux-linaro-stable-mx6.git;branch=${SRCBRANCH}"

------------------------------------

#3 lore raw
Quoted 7 lines · Neuer User

Hi Bruce

Thanks for the hint. I changed it, but the result is the same.

Strange is really that it shows the directory as being searched through but does not find the file that's contained?!

Quoted 8 lines

Also, there are two "main" recipes, which both include the inc file. This one throws warnings, but works:

linux-cubox-i_3.10.30.bb

This one throws warnings and then the error shown:

linux-cubox-i_3.10.30-linux4kix.bb

It's a bit hard to see what files you have where. Perhaps you could send a listing, e.g. for the standard Yocto kernel:

  $ tree meta/recipes-kernel/linux
  meta/recipes-kernel/linux
  ├── linux-dtb.inc
  ├── linux-dummy
  │   └── COPYING.GPL
  ├── linux-dummy.bb
  ├── linux-yocto_3.10.bb
  ├── linux-yocto_3.14.bb
  ├── linux-yocto_3.4.bb
  ├── linux-yocto-dev.bb
  ├── linux-yocto.inc
  ├── linux-yocto-rt_3.10.bb
  ├── linux-yocto-rt_3.14.bb
  ├── linux-yocto-rt_3.4.bb
  ├── linux-yocto-tiny_3.10.bb
  ├── linux-yocto-tiny_3.14.bb
  └── linux-yocto-tiny_3.4.bb

Do this for each of the kernel recipes you are trying to use.

Quoted 131 lines

Am I doing it right (now with the :=), or is there something fundamentally wrong with the two recipes and the include file?

Michael

Am 06.06.2014 16:40, schrieb Bruce Ashfield:

Quoted 122 lines · Neuer User
Quoted 47 lines

I get the following error:

WARNING: Failed to fetch URL file://defconfig, attempting MIRRORS if available
ERROR: Fetcher failure: Unable to find file file://defconfig anywhere. The paths that were searched were:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/poky

...

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/arm

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30-linux4kix/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/
/home/ubuntu/yocto/downloads/
ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'. Unable to fetch URL from any source.

Now, the directory:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

which is listed above, contains the "missing" file ("defconfig").

Hmm, strange...

Here are my recipes:

linux-cubox-i_3.10.30.inc:
------------------------------------
inherit kernel
require recipes-kernel/linux/linux-yocto.inc

Quoted 6 lines

SUMMARY = "Linaro Kernel 3.10.30 with additional machine specific patches"

SRCBRANCH ?= "linux-linaro-lsk-mx6"

FILESEXTRAPATHS_prepend += "${THISDIR}/${PN}-3.10.30:"

Have you tried this variant ?

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-3.10.30:"

You need the := in the assignment to have it evaluate immediately and pick up the directory of your bbappend (who's subdir is the one that contains the defconfig).

Bruce

Quoted 55 lines
SRC_URI = "file://defconfig \
             file://videoin.cfg \
             file://networking.cfg \
             file://wlan.cfg \
             file://dm-crypt.cfg \
             file://no-caam.cfg \
             file://leds.cfg \
             file://mod-to-builtin.cfg \
             file://brcmfmac4330-sdio.bin \
             file://brcmfmac4330-sdio.txt \

"

do_configure_append () {
      cd ${S}
      mkdir firmware/brcm
      cp ../brcmfmac4330-sdio.bin ./firmware/brcm/
      cp ../brcmfmac4330-sdio.txt ./firmware/brcm/
}

COMPATIBLE_MACHINE = "(cubox-i)"

KERNEL_IMAGETYPE_cubox-i = "zImage" KERNEL_DEVICETREE_cubox-i = "imx6dl-cubox-i.dtb imx6q-cubox-i.dtb"

SRCREV_machine = "${SRCREV}"
------------------------------------

linux-cubox-i_3.10.30.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "592b2d941dc3ecb6335d6820757340ffb5a192c8" #SRCREV = "860304ab6e749777523f3714d18c4c7d39b728fa" LOCALVERSION = "-cubox-i+SolidRun+${SRCPV}"

SRC_URI += "git://github.com/SolidRun/linux-linaro-stable-mx6;branch=${SRCBRANCH}"
-------------------------------

linux-cubox-i_3.10.30-linux4kix.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "a4ed70040f9dfdcdd6546a85c0477ecd1030e065" LOCALVERSION = "-cubox-i+linux4kix+${SRCPV}"

SRC_URI += "git://github.com/linux4kix/linux-linaro-stable-mx6.git;branch=${SRCBRANCH}"

------------------------------------

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
author
#4 lore raw

Hi Gary, Hi Bruce

This is the directory layout:

Both recipes are extremely similar, only differ by a different git repo and SRCREV. I might need to later have different patches for both recipes, but currently everthing is identical. That's why I made an include file.

.

├── linux-cubox-i-3.10.30
│   ├── brcmfmac4330-sdio.bin
│   ├── brcmfmac4330-sdio.txt
│   ├── defconfig
│   ├── dm-crypt.cfg
│   ├── leds.cfg
│   ├── mod-to-builtin.cfg
│   ├── networking.cfg
│   ├── no-caam.cfg
│   ├── touchscreen.cfg
│   ├── videoin.cfg
│   └── wlan.cfg
├── linux-cubox-i_3.10.30.bb
├── linux-cubox-i_3.10.30.inc
└── linux-cubox-i_3.10.30-linux4kix.bb

Am 06.06.2014 17:12, schrieb Gary Thomas:

Quoted 178 lines · Neuer User
Quoted 7 lines

Hi Bruce

Thanks for the hint. I changed it, but the result is the same.

Strange is really that it shows the directory as being searched through but does not find the file that's contained?!

Quoted 8 lines

Also, there are two "main" recipes, which both include the inc file. This one throws warnings, but works:

linux-cubox-i_3.10.30.bb

This one throws warnings and then the error shown:

linux-cubox-i_3.10.30-linux4kix.bb

It's a bit hard to see what files you have where. Perhaps you could send a listing, e.g. for the standard Yocto kernel:

  $ tree meta/recipes-kernel/linux
  meta/recipes-kernel/linux
  ├── linux-dtb.inc
  ├── linux-dummy
  │   └── COPYING.GPL
  ├── linux-dummy.bb
  ├── linux-yocto_3.10.bb
  ├── linux-yocto_3.14.bb
  ├── linux-yocto_3.4.bb
  ├── linux-yocto-dev.bb
  ├── linux-yocto.inc
  ├── linux-yocto-rt_3.10.bb
  ├── linux-yocto-rt_3.14.bb
  ├── linux-yocto-rt_3.4.bb
  ├── linux-yocto-tiny_3.10.bb
  ├── linux-yocto-tiny_3.14.bb
  └── linux-yocto-tiny_3.4.bb

Do this for each of the kernel recipes you are trying to use.

Quoted 138 lines

Am I doing it right (now with the :=), or is there something fundamentally wrong with the two recipes and the include file?

Michael

Am 06.06.2014 16:40, schrieb Bruce Ashfield:

Quoted 129 lines · Neuer User
Quoted 53 lines

I get the following error:

WARNING: Failed to fetch URL file://defconfig, attempting MIRRORS if available
ERROR: Fetcher failure: Unable to find file file://defconfig anywhere. The paths that were searched were:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/poky

...

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/arm

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30-linux4kix/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/
/home/ubuntu/yocto/downloads/
ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'. Unable to fetch URL from any source.

Now, the directory:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

which is listed above, contains the "missing" file ("defconfig").

Hmm, strange...

Here are my recipes:

linux-cubox-i_3.10.30.inc:
------------------------------------
inherit kernel
require recipes-kernel/linux/linux-yocto.inc

Quoted 6 lines

SUMMARY = "Linaro Kernel 3.10.30 with additional machine specific patches"

SRCBRANCH ?= "linux-linaro-lsk-mx6"

FILESEXTRAPATHS_prepend += "${THISDIR}/${PN}-3.10.30:"

Have you tried this variant ?

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-3.10.30:"

You need the := in the assignment to have it evaluate immediately and pick up the directory of your bbappend (who's subdir is the one that contains the defconfig).

Bruce

Quoted 56 lines
SRC_URI = "file://defconfig \
             file://videoin.cfg \
             file://networking.cfg \
             file://wlan.cfg \
             file://dm-crypt.cfg \
             file://no-caam.cfg \
             file://leds.cfg \
             file://mod-to-builtin.cfg \
             file://brcmfmac4330-sdio.bin \
             file://brcmfmac4330-sdio.txt \

"

do_configure_append () {
      cd ${S}
      mkdir firmware/brcm
      cp ../brcmfmac4330-sdio.bin ./firmware/brcm/
      cp ../brcmfmac4330-sdio.txt ./firmware/brcm/
}

COMPATIBLE_MACHINE = "(cubox-i)"

KERNEL_IMAGETYPE_cubox-i = "zImage" KERNEL_DEVICETREE_cubox-i = "imx6dl-cubox-i.dtb imx6q-cubox-i.dtb"

SRCREV_machine = "${SRCREV}"
------------------------------------

linux-cubox-i_3.10.30.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "592b2d941dc3ecb6335d6820757340ffb5a192c8" #SRCREV = "860304ab6e749777523f3714d18c4c7d39b728fa" LOCALVERSION = "-cubox-i+SolidRun+${SRCPV}"

SRC_URI += "git://github.com/SolidRun/linux-linaro-stable-mx6;branch=${SRCBRANCH}"
-------------------------------

linux-cubox-i_3.10.30-linux4kix.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "a4ed70040f9dfdcdd6546a85c0477ecd1030e065" LOCALVERSION = "-cubox-i+linux4kix+${SRCPV}"

SRC_URI += "git://github.com/linux4kix/linux-linaro-stable-mx6.git;branch=${SRCBRANCH}"

------------------------------------

#5 lore raw
Quoted 10 lines · Neuer User

Hi Gary, Hi Bruce

This is the directory layout:

Both recipes are extremely similar, only differ by a different git repo and SRCREV. I might need to later have different patches for both recipes, but currently everthing is identical. That's why I made an include file.

.

Quoted 15 lines
├── linux-cubox-i-3.10.30
│   ├── brcmfmac4330-sdio.bin
│   ├── brcmfmac4330-sdio.txt
│   ├── defconfig
│   ├── dm-crypt.cfg
│   ├── leds.cfg
│   ├── mod-to-builtin.cfg
│   ├── networking.cfg
│   ├── no-caam.cfg
│   ├── touchscreen.cfg
│   ├── videoin.cfg
│   └── wlan.cfg
├── linux-cubox-i_3.10.30.bb
├── linux-cubox-i_3.10.30.inc
└── linux-cubox-i_3.10.30-linux4kix.bb

I looks to be what I mentioned in my other reply. If you are using ${PN} to add the directories for searching, then the two recipes shouldn't result in the same ${PN} value, even if they are using a common .inc.

Check the output of bitbake -e when you build the non-working recipe, what does it have for PN ?

Bruce

Quoted 187 lines

Am 06.06.2014 17:12, schrieb Gary Thomas:

Quoted 178 lines · Neuer User
Quoted 7 lines

Hi Bruce

Thanks for the hint. I changed it, but the result is the same.

Strange is really that it shows the directory as being searched through but does not find the file that's contained?!

Quoted 8 lines

Also, there are two "main" recipes, which both include the inc file. This one throws warnings, but works:

linux-cubox-i_3.10.30.bb

This one throws warnings and then the error shown:

linux-cubox-i_3.10.30-linux4kix.bb

It's a bit hard to see what files you have where. Perhaps you could send a listing, e.g. for the standard Yocto kernel:

   $ tree meta/recipes-kernel/linux
   meta/recipes-kernel/linux
   ├── linux-dtb.inc
   ├── linux-dummy
   │   └── COPYING.GPL
   ├── linux-dummy.bb
   ├── linux-yocto_3.10.bb
   ├── linux-yocto_3.14.bb
   ├── linux-yocto_3.4.bb
   ├── linux-yocto-dev.bb
   ├── linux-yocto.inc
   ├── linux-yocto-rt_3.10.bb
   ├── linux-yocto-rt_3.14.bb
   ├── linux-yocto-rt_3.4.bb
   ├── linux-yocto-tiny_3.10.bb
   ├── linux-yocto-tiny_3.14.bb
   └── linux-yocto-tiny_3.4.bb

Do this for each of the kernel recipes you are trying to use.

Quoted 138 lines

Am I doing it right (now with the :=), or is there something fundamentally wrong with the two recipes and the include file?

Michael

Am 06.06.2014 16:40, schrieb Bruce Ashfield:

Quoted 129 lines · Neuer User
Quoted 53 lines

I get the following error:

WARNING: Failed to fetch URL file://defconfig, attempting MIRRORS if available
ERROR: Fetcher failure: Unable to find file file://defconfig anywhere. The paths that were searched were:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/poky

...

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/arm

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30-linux4kix/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/
/home/ubuntu/yocto/downloads/
ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'. Unable to fetch URL from any source.

Now, the directory:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

which is listed above, contains the "missing" file ("defconfig").

Hmm, strange...

Here are my recipes:

linux-cubox-i_3.10.30.inc:
------------------------------------
inherit kernel
require recipes-kernel/linux/linux-yocto.inc

Quoted 6 lines

SUMMARY = "Linaro Kernel 3.10.30 with additional machine specific patches"

SRCBRANCH ?= "linux-linaro-lsk-mx6"

FILESEXTRAPATHS_prepend += "${THISDIR}/${PN}-3.10.30:"

Have you tried this variant ?

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-3.10.30:"

You need the := in the assignment to have it evaluate immediately and pick up the directory of your bbappend (who's subdir is the one that contains the defconfig).

Bruce

Quoted 56 lines
SRC_URI = "file://defconfig \
              file://videoin.cfg \
              file://networking.cfg \
              file://wlan.cfg \
              file://dm-crypt.cfg \
              file://no-caam.cfg \
              file://leds.cfg \
              file://mod-to-builtin.cfg \
              file://brcmfmac4330-sdio.bin \
              file://brcmfmac4330-sdio.txt \

"

do_configure_append () {
       cd ${S}
       mkdir firmware/brcm
       cp ../brcmfmac4330-sdio.bin ./firmware/brcm/
       cp ../brcmfmac4330-sdio.txt ./firmware/brcm/
}

COMPATIBLE_MACHINE = "(cubox-i)"

KERNEL_IMAGETYPE_cubox-i = "zImage" KERNEL_DEVICETREE_cubox-i = "imx6dl-cubox-i.dtb imx6q-cubox-i.dtb"

SRCREV_machine = "${SRCREV}"
------------------------------------

linux-cubox-i_3.10.30.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "592b2d941dc3ecb6335d6820757340ffb5a192c8" #SRCREV = "860304ab6e749777523f3714d18c4c7d39b728fa" LOCALVERSION = "-cubox-i+SolidRun+${SRCPV}"

SRC_URI += "git://github.com/SolidRun/linux-linaro-stable-mx6;branch=${SRCBRANCH}"
-------------------------------

linux-cubox-i_3.10.30-linux4kix.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "a4ed70040f9dfdcdd6546a85c0477ecd1030e065" LOCALVERSION = "-cubox-i+linux4kix+${SRCPV}"

SRC_URI += "git://github.com/linux4kix/linux-linaro-stable-mx6.git;branch=${SRCBRANCH}"

------------------------------------

#6 lore raw
In reply to Neuer User
Quoted 7 lines · Neuer User

Hi Bruce

Thanks for the hint. I changed it, but the result is the same.

Strange is really that it shows the directory as being searched through but does not find the file that's contained?!

Quoted 8 lines

Also, there are two "main" recipes, which both include the inc file. This one throws warnings, but works:

linux-cubox-i_3.10.30.bb

This one throws warnings and then the error shown:

linux-cubox-i_3.10.30-linux4kix.bb

${PN} is going to change between those two recipes, so the defconfig will need to be in a different directory for each recipe.

But as Gary just suggested, getting a full directory listing in tree format would help clarify they layout you are using.

Bruce

Quoted 131 lines

Am I doing it right (now with the :=), or is there something fundamentally wrong with the two recipes and the include file?

Michael

Am 06.06.2014 16:40, schrieb Bruce Ashfield:

Quoted 122 lines · Neuer User
Quoted 47 lines

I get the following error:

WARNING: Failed to fetch URL file://defconfig, attempting MIRRORS if available
ERROR: Fetcher failure: Unable to find file file://defconfig anywhere. The paths that were searched were:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/poky

...

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/arm

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30-linux4kix/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i/

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/files/
/home/ubuntu/yocto/downloads/
ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'. Unable to fetch URL from any source.

Now, the directory:

/home/ubuntu/yocto/sources/meta-omnisonix/recipes-kernel/linux/linux-cubox-i-3.10.30/

which is listed above, contains the "missing" file ("defconfig").

Hmm, strange...

Here are my recipes:

linux-cubox-i_3.10.30.inc:
------------------------------------
inherit kernel
require recipes-kernel/linux/linux-yocto.inc

Quoted 6 lines

SUMMARY = "Linaro Kernel 3.10.30 with additional machine specific patches"

SRCBRANCH ?= "linux-linaro-lsk-mx6"

FILESEXTRAPATHS_prepend += "${THISDIR}/${PN}-3.10.30:"

Have you tried this variant ?

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-3.10.30:"

You need the := in the assignment to have it evaluate immediately and pick up the directory of your bbappend (who's subdir is the one that contains the defconfig).

Bruce

Quoted 55 lines
SRC_URI = "file://defconfig \
             file://videoin.cfg \
             file://networking.cfg \
             file://wlan.cfg \
             file://dm-crypt.cfg \
             file://no-caam.cfg \
             file://leds.cfg \
             file://mod-to-builtin.cfg \
             file://brcmfmac4330-sdio.bin \
             file://brcmfmac4330-sdio.txt \

"

do_configure_append () {
      cd ${S}
      mkdir firmware/brcm
      cp ../brcmfmac4330-sdio.bin ./firmware/brcm/
      cp ../brcmfmac4330-sdio.txt ./firmware/brcm/
}

COMPATIBLE_MACHINE = "(cubox-i)"

KERNEL_IMAGETYPE_cubox-i = "zImage" KERNEL_DEVICETREE_cubox-i = "imx6dl-cubox-i.dtb imx6q-cubox-i.dtb"

SRCREV_machine = "${SRCREV}"
------------------------------------

linux-cubox-i_3.10.30.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "592b2d941dc3ecb6335d6820757340ffb5a192c8" #SRCREV = "860304ab6e749777523f3714d18c4c7d39b728fa" LOCALVERSION = "-cubox-i+SolidRun+${SRCPV}"

SRC_URI += "git://github.com/SolidRun/linux-linaro-stable-mx6;branch=${SRCBRANCH}"
-------------------------------

linux-cubox-i_3.10.30-linux4kix.bb:
------------------------------------
include linux-cubox-i_3.10.30.inc

SRCREV = "a4ed70040f9dfdcdd6546a85c0477ecd1030e065" LOCALVERSION = "-cubox-i+linux4kix+${SRCPV}"

SRC_URI += "git://github.com/linux4kix/linux-linaro-stable-mx6.git;branch=${SRCBRANCH}"

------------------------------------