Naive implementation of AcpiExCmosSpaceHandler()

PATCH New Anthony Jenkins 1 participant 1 message Jun 7, 2014 ACPI component architecture (acpica)

Share & tools

Anthony Jenkins

author

2014-06-07 14:28 UTC #0 lore raw

PATCH 1/1 Naive implementation of AcpiExCmosSpaceHandler()

I'm testing on FreeBSD 11.0-CURRENT #18 r266756M on an HP Envy Sleekbook 6z-1100 (AMD A-10). This is a naive implementation of AcpiExCmosSpaceHandler(), it simply uses I/O ports 0x70 and 0x71 to read/write CMOS registers using AcpiHwWritePort()/AcpiHwReadPort() calls. I'm new(ish) to the ACPICA subsystem and I'm probably not going about this the right way - I think I should implement an actual FreeBSD CMOS RTC device which handles the three PNP IDs that represent those hardware devices, but this was good enough for what I was trying to do.

This fixes my HP Envy 6z-1100 laptop's suspend/resume (except video fails to resume, but I believe that's due to backlight handling from my research). Before, initiating a suspend (zzz(8)) caused the laptop to suspend and immediately resume. Now trying to track down the backlight issue. I implemented a missing _BQC method which returns a single value from the _BCL listj; I think Linux does some kind of vendor backlight control method if this method is missing.

Suggestions on the patch or backlight issue welcome. Anthony Jenkins

source/components/events/evhandler.c +4 -0

index d17411e..4f341ca 100644
@@ -142,6 +142,7 @@ UINT8        AcpiGbl_DefaultAddressSpaces[ACPI_NUM_DEFAULT_SPACES] =
     ACPI_ADR_SPACE_SYSTEM_MEMORY,
     ACPI_ADR_SPACE_SYSTEM_IO,
     ACPI_ADR_SPACE_PCI_CONFIG,
+    ACPI_ADR_SPACE_CMOS,
     ACPI_ADR_SPACE_DATA_TABLE
 };

@@ -451,9 +452,12 @@ AcpiEvInstallSpaceHandler (
      */
     if ((Node->Type != ACPI_TYPE_DEVICE)     &&
         (Node->Type != ACPI_TYPE_PROCESSOR)  &&
+        (Node->Type != ACPI_TYPE_REGION)     &&
         (Node->Type != ACPI_TYPE_THERMAL)    &&
         (Node != AcpiGbl_RootNode))
     {
+        ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
+            "Device %p not a DEVICE, PROCESSOR, REGION, THERMAL type or root node.\n", Node));
         Status = AE_BAD_PARAMETER;
         goto UnlockAndExit;
     }

source/components/executer/exregion.c +32 -2

index ea10a01..bfdd721 100644
@@ -521,6 +521,20 @@ AcpiExPciConfigSpaceHandler (
     return_ACPI_STATUS (Status);
 }
 
+static UINT8 AcpiExCmosRead(ACPI_PHYSICAL_ADDRESS Address)
+{
+    UINT32 Value32;
+
+    AcpiHwWritePort((ACPI_IO_ADDRESS) 0x70, (UINT32) Address, 8);
+    AcpiHwReadPort ((ACPI_IO_ADDRESS) 0x71, &Value32, 8);
+    return Value32 & 0xFF;
+}
+
+static void AcpiExCmosWrite(ACPI_PHYSICAL_ADDRESS Address, UINT8 Value)
+{
+    AcpiHwWritePort((ACPI_IO_ADDRESS) 0x70, (UINT32) Address, 8);
+    AcpiHwWritePort((ACPI_IO_ADDRESS) 0x71, (UINT32) Value, 8);
+}
 
 /*******************************************************************************
  *

@@ -545,7 +559,7 @@ AcpiExCmosSpaceHandler (
     UINT32                  Function,
     ACPI_PHYSICAL_ADDRESS   Address,
     UINT32                  BitWidth,
-    UINT64                  *Value,
+    UINT64                  *Value64,
     void                    *HandlerContext,
     void                    *RegionContext)
 {

@@ -554,7 +568,23 @@ AcpiExCmosSpaceHandler (
 
     ACPI_FUNCTION_TRACE (ExCmosSpaceHandler);
 
-
+    if (Address < 0x80 &&
+        (Function == ACPI_READ || Function == ACPI_WRITE) &&
+        BitWidth <= 64)
+    {
+        UINT32 i;
+        UINT8 *Value = (UINT8 *)Value64;
+
+        for (i = 0; i < (BitWidth + 7) / 8; ++i, ++Address, ++Value) {
+            if (Function == ACPI_READ) {
+                *Value = AcpiExCmosRead(Address);
+            } else {
+                AcpiExCmosWrite(Address, *Value);
+            }
+        }
+    } else {
+        Status = AE_BAD_PARAMETER;
+    }
     return_ACPI_STATUS (Status);
 }

source/include/acconfig.h +1 -1

index 6b34484..7fe2eac 100644
@@ -270,7 +270,7 @@
 /* Maximum SpaceIds for Operation Regions */
 
 #define ACPI_MAX_ADDRESS_SPACE          255
-#define ACPI_NUM_DEFAULT_SPACES         4
+#define ACPI_NUM_DEFAULT_SPACES         5
 
 /* Array sizes. Used for range checking also */