ARM: shmobile: lager: Remove duplicate i2c3 nodes
Subsystems (2)
PATCH 1/1 ARM: shmobile: lager: Remove duplicate i2c3 nodes
Due to an error when merging df40f256b18300e1 ("ARM: shmobile:
lager: add i2c1, i2c2 pins") a duplicate i2c3 node.
This patch moves the duplicate and moves to old node to be closer to the other new i2c nodes.
Cc Ben Dooks <[email protected]>
Signed-off-by Simon Horman <[email protected]>
--- arch/arm/boot/dts/r8a7790-lager.dts | 32 ++++++++++++++------------------ 1 file changed, 14 insertions(+), 18 deletions(-)
arch/arm/boot/dts/r8a7790-lager.dts +14 -18
@@ -333,22 +333,6 @@ status = "okay"; }; -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - status = "okay"; - - vdd_dvfs: regulator at 68 { - compatible = "diasemi,da9210"; - reg = <0x68>; - - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-boot-on; - regulator-always-on; - }; -}; - &cpu0 { cpu0-supply = <&vdd_dvfs>; };
@@ -369,6 +353,18 @@ pinctrl-names = "default"; }; -&i2c3 { - status = "ok"; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + vdd_dvfs: regulator at 68 { + compatible = "diasemi,da9210"; + reg = <0x68>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; };
Signature · 1 line
2.0.0.rc2
PATCH 1/1 ARM: shmobile: lager: Remove duplicate i2c3 nodes
Quoted 8 lines · Simon Horman
Due to an error when merging
df40f256b18300e1("ARM: shmobile:
lager: add i2c1, i2c2 pins") a duplicate i2c3 node.This patch moves the duplicate and moves to old node to be closer to the other new i2c nodes.
Cc Ben Dooks <[email protected]>Signed-off-by Simon Horman <[email protected]>
Reviewed-by Ben Dooks <[email protected]>
Signature · 2 lines
Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius