Skip to contentSkip to conversation

Yocto Labs

DISCUSSION Arun Kumar 4 participants 4 messages Jun 22, 2014 – Jun 23, 2014

lore
Share & tools
lore

Arun Kumar

author
#0 lore raw

Hi,

I am new to Yocto project and have been following the documentation
for familiarity.
I am looking for hands on lab sessions for the yocto project.
I am unable to find the same on INTERNET, all i find is conference videos and presentation.

If anyone can share links to online tutorial videos / pdfs it would be really useful.
content like creating and deploying own recipe files, layers. The Documentation describes these tasks at a very abstract level, an little more advanced version of the same would be appreciated. Thanks in advance...

#1 lore raw
Quoted 8 lines · Arun Kumar

Hi,

I am new to Yocto project and have been following the
documentation for familiarity.
I am looking for hands on lab sessions for the yocto project. I am unable to find the same on INTERNET, all i find is conference videos and presentation.

Quoted 6 lines

If anyone can share links to online tutorial videos / pdfs it would be really useful.
content like creating and deploying own recipe files, layers. The Documentation describes these tasks at a very abstract level, an little more advanced version of the same would be appreciated. Thanks in advance...

Might be of some use Arun,

https://wiki.yoctoproject.org/wiki/Building_your_own_recipes_from_first_principles

Regards,

Alex

#2 lore raw

Hi Arun,

The link mentioned by Alex,is really a good starting point. I was completely unaware of yocto until 5 weeks ago and started using this URL.

In the meantime, I have achieved:
- running an ARM kernel + RFS + Mono running in Qemu using NFS (to be reached from any other PC)
- running an ARM kernel + RFS + Mono running using NFS running on an ARM development board.
- added 2 custom drivers to the yocto build environment (source code in a local tarball for now)

The kernel (2.6.37) is being build separately from the yocto generated RFS.
(since the board manufacturer does not support the V3.x kernel for it)

I have two NFS trees, one with soft float routines and one with hard float routines (using ARM hardware) that both work on the board.

I had some problems building with hard float of which the cause is still unknown.

Major issues that I encountered were:
- adapting our x86 mono build environment to ARM (some compiler issues)
- a corrupted U-boot on my development board
- getting qemu to run with NFS properly
- difference between ttyO0 and ttyAMA0 for physical board and Qemu!
- how to convert a make project to an automake project (for the drivers)

So it takes a bit of time, depending on what you need to do and your level of experience.

The ONE thing that I did not find was how to setup my environment for ARM hard float so I can build test applications for the board. Turned out to be also no big deal once everything else was up and running.

FYI: my development environment: Ubuntu-14.04 in Vmware Player on a Window 7 machine.

Best regards,

Ruud

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Alex J Lennon
Sent: Sunday, June 22, 2014 10:54 AM
To: Arun Kumar; Yocto Mailing List
Subject: Re: [yocto] Yocto Labs

Quoted 8 lines · Arun Kumar

Hi,

I am new to Yocto project and have been following the
documentation for familiarity.
I am looking for hands on lab sessions for the yocto project. I am unable to find the same on INTERNET, all i find is conference videos and presentation.

Quoted 7 lines

If anyone can share links to online tutorial videos / pdfs it would be

really useful.
content like creating and deploying own recipe files, layers. The Documentation describes these tasks at a very abstract level, an little more advanced version of the same would be appreciated. Thanks in advance...

Might be of some use Arun,

https://wiki.yoctoproject.org/wiki/Building_your_own_recipes_from_first_
principles

Regards,

Alex

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw
In reply to Arun Kumar

Hi Arun - this page contains some of the hands-on labs we presented at YP Developer Days, with the kernel lab very recently updated:

https://www.yoctoproject.org/tools-resources/training

hope that helps

Quoted 19 lines · Arun Kumar

Hi,

I am new to Yocto project and have been following the documentation for
familiarity.
I am looking for hands on lab sessions for the yocto project.
I am unable to find the same on INTERNET, all i find is conference videos and presentation.

If anyone can share links to online tutorial videos / pdfs it would be really useful.
content like creating and deploying own recipe files, layers. The Documentation describes these tasks at a very abstract level, an little more advanced version of the same would be appreciated.
Thanks in advance...
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 2 lines
Jeff Osier-Mixon @Intel
Yocto Project Community Manager http://yoctoproject.org