hwmon: ntc_thermistor: prepose vendor prefix change

Add Murata Manufacturing Co., Ltd. to the list of device tree vendor prefixes.

Murata manufactures NTC (Negative Temperature Coefficient) based Thermistors for small scale applications like Mobiles and PDAs.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Acked-by Mark Rutland <[email protected]>

Cc Guenter Roeck <[email protected]>

Murata Manufacturing Co., Ltd is the vendor for NTC (Negative Temperature coefficient) based Thermistors. But, the driver extensively uses "NTC" as the vendor name.

This patch corrects the vendor name also updates the compatibility strings according to the vendor-prefix.txt

Note: Drivers continue to support the previous compatible strings but further addition of these compatible strings in device tree is deprecated.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Guenter Roeck <[email protected]>

---
Changes since v1:
1. Kept the old compatible string marked as <DEPRECATED> in code and in the Documentation.

 .../devicetree/bindings/arm/samsung/exynos-adc.txt |    2 +-
 .../devicetree/bindings/hwmon/ntc_thermistor.txt   |   20 ++++++++++++++------
 Documentation/hwmon/ntc_thermistor                 |    8 ++++----
 drivers/hwmon/Kconfig                              |    5 +++--
 drivers/hwmon/ntc_thermistor.c                     |   14 +++++++++++++-
 5 files changed, 35 insertions(+), 14 deletions(-)

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +1 -1

index 5d49f2b..832fe8c 100644
@@ -48,7 +48,7 @@ adc at 12D10000 {
 
        /* NTC thermistor is a hwmon device */
        ncp15wb473 at 0 {
-               compatible = "ntc,ncp15wb473";
+               compatible = "murata,ncp15wb473";
                pullup-uv = <1800000>;
                pullup-ohm = <47000>;
                pulldown-ohm = <0>;

Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +14 -6

index c6f6667..b117b2e 100644
@@ -3,11 +3,19 @@ NTC Thermistor hwmon sensors
 
 Requires node properties:
 - "compatible" value : one of
-       "ntc,ncp15wb473"
-       "ntc,ncp18wb473"
-       "ntc,ncp21wb473"
-       "ntc,ncp03wb473"
-       "ntc,ncp15wl333"
+       "murata,ncp15wb473"
+       "murata,ncp18wb473"
+       "murata,ncp21wb473"
+       "murata,ncp03wb473"
+       "murata,ncp15wl333"
+
+/* Usage of vendor name "ntc" is deprecated */
+<DEPRECATED>   "ntc,ncp15wb473"
+<DEPRECATED>   "ntc,ncp18wb473"
+<DEPRECATED>   "ntc,ncp21wb473"
+<DEPRECATED>   "ntc,ncp03wb473"
+<DEPRECATED>   "ntc,ncp15wl333"
+
 - "pullup-uv"  Pull up voltage in micro volts
 - "pullup-ohm" Pull up resistor value in ohms
 - "pulldown-ohm" Pull down resistor value in ohms

@@ -21,7 +29,7 @@ Read more about iio bindings at
 
 Example:
        ncp15wb473 at 0 {
-               compatible = "ntc,ncp15wb473";
+               compatible = "murata,ncp15wb473";
                pullup-uv = <1800000>;
                pullup-ohm = <47000>;
                pulldown-ohm = <0>;

Documentation/hwmon/ntc_thermistor +4 -4

index 3bfda94..057b770 100644
@@ -1,7 +1,7 @@
 Kernel driver ntc_thermistor
 =================
 
-Supported thermistors:
+Supported thermistors from Murata:
 * Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333
   Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
   Datasheet: Publicly available at Murata

@@ -15,9 +15,9 @@ Authors:
 Description
 -----------
 
-The NTC thermistor is a simple thermistor that requires users to provide the
-resistance and lookup the corresponding compensation table to get the
-temperature input.
+The NTC (Negative Temperature Coefficient) thermistor is a simple thermistor
+that requires users to provide the resistance and lookup the corresponding
+compensation table to get the temperature input.
 
 The NTC driver provides lookup tables with a linear approximation function
 and four circuit models with an option not to use any of the four models.

drivers/hwmon/Kconfig +3 -2

index 08531a1..154851b 100644
@@ -1052,7 +1052,7 @@ config SENSORS_PC87427
          will be called pc87427.
 
 config SENSORS_NTC_THERMISTOR
-       tristate "NTC thermistor support"
+       tristate "NTC thermistor support from Murata"
        depends on !OF || IIO=n || IIO
        help
          This driver supports NTC thermistors sensor reading and its

@@ -1060,7 +1060,8 @@ config SENSORS_NTC_THERMISTOR
          send notifications about the temperature.
 
          Currently, this driver supports
-         NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+         NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
+         from Murata.
 
          This driver can also be built as a module.  If so, the module
          will be called ntc-thermistor.

drivers/hwmon/ntc_thermistor.c +13 -2

index e76feb86..bdfbe91 100644
@@ -163,6 +163,18 @@ static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
 }
 
 static const struct of_device_id ntc_match[] = {
+       { .compatible = "murata,ncp15wb473",
+               .data = &ntc_thermistor_id[0] },
+       { .compatible = "murata,ncp18wb473",
+               .data = &ntc_thermistor_id[1] },
+       { .compatible = "murata,ncp21wb473",
+               .data = &ntc_thermistor_id[2] },
+       { .compatible = "murata,ncp03wb473",
+               .data = &ntc_thermistor_id[3] },
+       { .compatible = "murata,ncp15wl333",
+               .data = &ntc_thermistor_id[4] },
+
+       /* Usage of vendor name "ntc" is deprecated */
        { .compatible = "ntc,ncp15wb473",
                .data = &ntc_thermistor_id[0] },
        { .compatible = "ntc,ncp18wb473",

@@ -534,7 +546,7 @@ static struct platform_driver ntc_thermistor_driver = {
 
 module_platform_driver(ntc_thermistor_driver);
 
-MODULE_DESCRIPTION("NTC Thermistor Driver");
+MODULE_DESCRIPTION("NTC Thermistor Driver from Murata");
 MODULE_AUTHOR("MyungJoo Ham <[email protected]>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:ntc-thermistor");
--

1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Hello Naveen,

Quoted 18 lines · Naveen Krishna Chatradhi

Murata Manufacturing Co., Ltd is the vendor for NTC (Negative Temperature coefficient) based Thermistors. But, the driver extensively uses "NTC" as the vendor name.

This patch corrects the vendor name also updates the compatibility strings according to the vendor-prefix.txt

Note: Drivers continue to support the previous compatible strings but further addition of these compatible strings in device tree is deprecated.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Guenter Roeck <[email protected]>

---
Changes since v1:
1. Kept the old compatible string marked as <DEPRECATED> in code and in the Documentation.

Quoted 7 lines

 .../devicetree/bindings/arm/samsung/exynos-adc.txt |    2 +-
 .../devicetree/bindings/hwmon/ntc_thermistor.txt   |   20 ++++++++++++++------
 Documentation/hwmon/ntc_thermistor                 |    8 ++++----
 drivers/hwmon/Kconfig                              |    5 +++--
 drivers/hwmon/ntc_thermistor.c                     |   14 +++++++++++++-
 5 files changed, 35 insertions(+), 14 deletions(-)

Looks good to me.

Reviewed-by Javier Martinez Canillas <[email protected]>

Quoted 140 lines

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +1 -1

index 5d49f2b..832fe8c 100644
@@ -48,7 +48,7 @@ adc at 12D10000 {
 
        /* NTC thermistor is a hwmon device */
        ncp15wb473 at 0 {
-               compatible = "ntc,ncp15wb473";
+               compatible = "murata,ncp15wb473";
                pullup-uv = <1800000>;
                pullup-ohm = <47000>;
                pulldown-ohm = <0>;

Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +14 -6

index c6f6667..b117b2e 100644
@@ -3,11 +3,19 @@ NTC Thermistor hwmon sensors
 
 Requires node properties:
 - "compatible" value : one of
-       "ntc,ncp15wb473"
-       "ntc,ncp18wb473"
-       "ntc,ncp21wb473"
-       "ntc,ncp03wb473"
-       "ntc,ncp15wl333"
+       "murata,ncp15wb473"
+       "murata,ncp18wb473"
+       "murata,ncp21wb473"
+       "murata,ncp03wb473"
+       "murata,ncp15wl333"
+
+/* Usage of vendor name "ntc" is deprecated */
+<DEPRECATED>   "ntc,ncp15wb473"
+<DEPRECATED>   "ntc,ncp18wb473"
+<DEPRECATED>   "ntc,ncp21wb473"
+<DEPRECATED>   "ntc,ncp03wb473"
+<DEPRECATED>   "ntc,ncp15wl333"
+
 - "pullup-uv"  Pull up voltage in micro volts
 - "pullup-ohm" Pull up resistor value in ohms
 - "pulldown-ohm" Pull down resistor value in ohms

@@ -21,7 +29,7 @@ Read more about iio bindings at
 
 Example:
        ncp15wb473 at 0 {
-               compatible = "ntc,ncp15wb473";
+               compatible = "murata,ncp15wb473";
                pullup-uv = <1800000>;
                pullup-ohm = <47000>;
                pulldown-ohm = <0>;

Documentation/hwmon/ntc_thermistor +4 -4

index 3bfda94..057b770 100644
@@ -1,7 +1,7 @@
 Kernel driver ntc_thermistor
 =================
 
-Supported thermistors:
+Supported thermistors from Murata:
 * Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333
   Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
   Datasheet: Publicly available at Murata

@@ -15,9 +15,9 @@ Authors:
 Description
 -----------
 
-The NTC thermistor is a simple thermistor that requires users to provide the
-resistance and lookup the corresponding compensation table to get the
-temperature input.
+The NTC (Negative Temperature Coefficient) thermistor is a simple thermistor
+that requires users to provide the resistance and lookup the corresponding
+compensation table to get the temperature input.
 
 The NTC driver provides lookup tables with a linear approximation function
 and four circuit models with an option not to use any of the four models.

drivers/hwmon/Kconfig +3 -2

index 08531a1..154851b 100644
@@ -1052,7 +1052,7 @@ config SENSORS_PC87427
          will be called pc87427.
 
 config SENSORS_NTC_THERMISTOR
-       tristate "NTC thermistor support"
+       tristate "NTC thermistor support from Murata"
        depends on !OF || IIO=n || IIO
        help
          This driver supports NTC thermistors sensor reading and its

@@ -1060,7 +1060,8 @@ config SENSORS_NTC_THERMISTOR
          send notifications about the temperature.
 
          Currently, this driver supports
-         NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+         NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
+         from Murata.
 
          This driver can also be built as a module.  If so, the module
          will be called ntc-thermistor.

drivers/hwmon/ntc_thermistor.c +13 -2

index e76feb86..bdfbe91 100644
@@ -163,6 +163,18 @@ static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
 }
 
 static const struct of_device_id ntc_match[] = {
+       { .compatible = "murata,ncp15wb473",
+               .data = &ntc_thermistor_id[0] },
+       { .compatible = "murata,ncp18wb473",
+               .data = &ntc_thermistor_id[1] },
+       { .compatible = "murata,ncp21wb473",
+               .data = &ntc_thermistor_id[2] },
+       { .compatible = "murata,ncp03wb473",
+               .data = &ntc_thermistor_id[3] },
+       { .compatible = "murata,ncp15wl333",
+               .data = &ntc_thermistor_id[4] },
+
+       /* Usage of vendor name "ntc" is deprecated */
        { .compatible = "ntc,ncp15wb473",
                .data = &ntc_thermistor_id[0] },
        { .compatible = "ntc,ncp18wb473",

@@ -534,7 +546,7 @@ static struct platform_driver ntc_thermistor_driver = {
 
 module_platform_driver(ntc_thermistor_driver);
 
-MODULE_DESCRIPTION("NTC Thermistor Driver");
+MODULE_DESCRIPTION("NTC Thermistor Driver from Murata");
 MODULE_AUTHOR("MyungJoo Ham <[email protected]>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:ntc-thermistor");
--

1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Murata Manufacturing Co., Ltd is the vendor for NTC (Negative Temperature coefficient) based Thermistors. But, the driver extensively uses "NTC" as the vendor name.

This patch corrects the vendor name also updates the compatibility strings according to the vendor-prefix.txt

Note: Drivers continue to support the previous compatible strings but further addition of these compatible strings in device tree is deprecated.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Guenter Roeck <[email protected]>

As Murata Manufactures the NTC based thermistors. The vendor name in the compatibility is preposed to change to "murata"

This patch uses the new compatibility string in exynos4412 based Trats2 board.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Chanwoo Choi <[email protected]>

---
Changes since v1:
None

 arch/arm/boot/dts/exynos4412-trats2.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

arch/arm/boot/dts/exynos4412-trats2.dts +1 -1

index 11967f4..d35755a 100644
@@ -771,7 +771,7 @@
 	};
 
 	thermistor-ap at 0 {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
 		pullup-ohm = <100000>;	 /* 100K */
 		pulldown-ohm = <100000>; /* 100K */

Exynos5420 based Peach PIT board has 4 NTC thermistors to measure temperatures at various points on the board.

IIO based ADC becomes the parent and NTC thermistors are the childs, via the HWMON interface.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Doug Anderson <[email protected]>

---
Changes since v1:
1. Arranged the ADC node alphabetical
2. Added "status = "okay"" to the ADC node

This patch needs
1. MAX77802 PMIC device tree nodes (for ldo9)
https://www.mail-archive.com/devicetree at vger.kernel.org/msg31430.html
2. Uses the DT documentation for NTC thermistors updated with vendor-prefix

This patch set is tested
1. On Peach PIT board via sysfs entry exposed by hwmon localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input 37436
36449
38560
38059

2. Backward compatibility is tested by replacing "murata" with "ntc" in the dts nodes and running the above test.

 arch/arm/boot/dts/exynos5420-peach-pit.dts |   34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

arch/arm/boot/dts/exynos5420-peach-pit.dts +34 -1

index b96a66a..19d733d 100644
@@ -101,6 +101,40 @@
        };
 };
 
+&adc {
+       status = "okay";
+       vdd-supply = <&ldo9_reg>;
+
+       ncp15wb473 at 3 {
+               compatible = "murata,ncp15wb473";
+               pullup-uv = <1800000>;
+               pullup-ohm = <47000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 3>;
+       };
+       ncp15wb473 at 4 {
+               compatible = "murata,ncp15wb473";
+               pullup-uv = <1800000>;
+               pullup-ohm = <47000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 4>;
+       };
+       ncp15wb473 at 5 {
+               compatible = "murata,ncp15wb473";
+               pullup-uv = <1800000>;
+               pullup-ohm = <47000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 5>;
+       };
+       ncp15wb473 at 6 {
+               compatible = "murata,ncp15wb473";
+               pullup-uv = <1800000>;
+               pullup-ohm = <47000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 6>;
+       };
+};
+
 &dp {
        status = "okay";
        pinctrl-names = "default";
--

1.7.9.5

Exynos5420 based Peach PIT board has 4 NTC thermistors to measure temperatures at various points on the board.

IIO based ADC becomes the parent and NTC thermistors are the childs, via the HWMON interface.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Doug Anderson <[email protected]>

---
Changes since v1:
1. Arranged the ADC node alphabetical
2. Added "status = "okay"" to the ADC node

This patch needs
1. MAX77802 PMIC device tree nodes (for ldo9)
https://www.mail-archive.com/devicetree at vger.kernel.org/msg31430.html
2. Uses the DT documentation for NTC thermistors updated with vendor-prefix

This patch set is tested
1. On Peach PIT board via sysfs entry exposed by hwmon localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input 37436
36449
38560
38059

2. Backward compatibility is tested by replacing "murata" with "ntc" in the dts nodes and running the above test.

 arch/arm/boot/dts/exynos5420-peach-pit.dts |   34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Naveen,

Quoted 26 lines · Naveen Krishna Chatradhi

Exynos5420 based Peach PIT board has 4 NTC thermistors to measure temperatures at various points on the board.

IIO based ADC becomes the parent and NTC thermistors are the childs, via the HWMON interface.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Doug Anderson <[email protected]>

---
Changes since v1:
1. Arranged the ADC node alphabetical
2. Added "status = "okay"" to the ADC node

This patch needs
1. MAX77802 PMIC device tree nodes (for ldo9)
https://www.mail-archive.com/devicetree at vger.kernel.org/msg31430.html
2. Uses the DT documentation for NTC thermistors updated with vendor-prefix

This patch set is tested
1. On Peach PIT board via sysfs entry exposed by hwmon localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input 37436
36449
38560
38059

Quoted 5 lines

2. Backward compatibility is tested by replacing "murata" with "ntc" in the dts nodes and running the above test.

 arch/arm/boot/dts/exynos5420-peach-pit.dts |   34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Now that Javier has spun his patch, perhaps you can fold the "pi" version in here too?

Reviewed-by Doug Anderson <[email protected]>

Tested-by Doug Anderson <[email protected]>

Doug,

Quoted 36 lines · Doug Anderson

Naveen,

Quoted 31 lines · Naveen Krishna Chatradhi

Exynos5420 based Peach PIT board has 4 NTC thermistors to measure temperatures at various points on the board.

IIO based ADC becomes the parent and NTC thermistors are the childs, via the HWMON interface.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Doug Anderson <[email protected]>

---
Changes since v1:
1. Arranged the ADC node alphabetical
2. Added "status = "okay"" to the ADC node

This patch needs
1. MAX77802 PMIC device tree nodes (for ldo9)
https://www.mail-archive.com/devicetree at vger.kernel.org/msg31430.html
2. Uses the DT documentation for NTC thermistors updated with vendor-prefix

This patch set is tested
1. On Peach PIT board via sysfs entry exposed by hwmon localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input 37436
36449
38560
38059

2. Backward compatibility is tested by replacing "murata" with "ntc" in the dts nodes and running the above test.

 arch/arm/boot/dts/exynos5420-peach-pit.dts |   34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Quoted 2 lines

Now that Javier has spun his patch, perhaps you can fold the "pi" version in here too?

Sure, thanks for the information.

Snow also needs the adc nodes.
Will try to implement an adc fragment for PIT, PI and Snow.

Quoted 4 lines

Reviewed-by Doug Anderson <[email protected]>

Tested-by Doug Anderson <[email protected]>

--
Shine bright,
(: Nav :)

Doug,

Quoted 36 lines · Doug Anderson

Naveen,

Quoted 31 lines · Naveen Krishna Chatradhi

Exynos5420 based Peach PIT board has 4 NTC thermistors to measure temperatures at various points on the board.

IIO based ADC becomes the parent and NTC thermistors are the childs, via the HWMON interface.

Signed-off-by Naveen Krishna Chatradhi <[email protected]>

Cc Doug Anderson <[email protected]>

---
Changes since v1:
1. Arranged the ADC node alphabetical
2. Added "status = "okay"" to the ADC node

This patch needs
1. MAX77802 PMIC device tree nodes (for ldo9)
https://www.mail-archive.com/devicetree at vger.kernel.org/msg31430.html
2. Uses the DT documentation for NTC thermistors updated with vendor-prefix

This patch set is tested
1. On Peach PIT board via sysfs entry exposed by hwmon localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input 37436
36449
38560
38059

2. Backward compatibility is tested by replacing "murata" with "ntc" in the dts nodes and running the above test.

 arch/arm/boot/dts/exynos5420-peach-pit.dts |   34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Quoted 2 lines

Now that Javier has spun his patch, perhaps you can fold the "pi" version in here too?

Sure, thanks for the information.

Snow also needs the adc nodes.
Will try to implement an adc fragment for PIT, PI and Snow.

Quoted 4 lines

Reviewed-by Doug Anderson <[email protected]>

Tested-by Doug Anderson <[email protected]>

--
Shine bright,
(: Nav :)

As Murata is the manufacturer of the NTC (Negative Temperature coefficient) based Thermistors. ntc_thermistor driver extensively used the prefix "ntc". But, vendor-prefix should be "murata" instead of "ntc".

This patchset
1. Updates the vendor-prefix, DT bindings and Documentation, where ever necessary.
2. Adds thermistor nodes to Exynos5420 based Peach PIT board.

Patches:
1/4. devicetree: bindings: Document murata vendor prefix
Adds the vendor prefix "murata" to vendor-prefixes.txt.
2/4. hwmon: ntc_thermistor: Use the manufacturer name properly
Updates the driver, Kconfig, device tree bindings and Documentation with the Manufacturer/vendor information.
Keeps the old bindings marked as <DEPRECATED> in code and Documentation
3/4. ARM: DTS: use new compatible string as per the documentation
Updates the device node in Exynos4412 based Trats2 board with the new device tree bindings.
4/4. ARM: DTS: Add NTC thermistor nodes as child nodes to ADC
Adds Thermistor nodes to Exynos5420 based Peach PIT board.

This patchset
Naveen Krishna Chatradhi (4):
devicetree: bindings: Document murata vendor prefix
hwmon: ntc_thermistor: Use the manufacturer name properly
ARM: DTS: use new compatible string as per the documentation
ARM: DTS: Add NTC thermistor nodes to Exynos5420 based Peach_PIT

 .../devicetree/bindings/arm/samsung/exynos-adc.txt |    2 +-
 .../devicetree/bindings/hwmon/ntc_thermistor.txt   |   20 ++++++++----
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 Documentation/hwmon/ntc_thermistor                 |    8 ++---
 arch/arm/boot/dts/exynos4412-trats2.dts            |    4 +--
 arch/arm/boot/dts/exynos5420-peach-pit.dts         |   34

 drivers/hwmon/Kconfig                              |    5 +--
 drivers/hwmon/ntc_thermistor.c                     |   14 +++++++-
 8 files changed, 72 insertions(+), 16 deletions(-)

--
1.7.9.5

Quoted 1 line · Naveen Krishna Chatradhi

+ Jean Delvare, Guenter Roeck

I'm adding maintainers for drivers/hwmon/ntc* but I'm not sure.

Hi,

This series looks good to me. I will take 3/4 and 4/4 for exynos DT changes once hwmon/ntc maintainer pick the others.

Quoted 10 lines · Kukjin Kim

Quoted 2 lines · Naveen Krishna Chatradhi

+ Jean Delvare, Guenter Roeck

I'm adding maintainers for drivers/hwmon/ntc* but I'm not sure.

Hi,

Quoted 4 lines

This series looks good to me. I will take 3/4 and 4/4 for exynos DT changes once
hwmon/ntc maintainer pick the others.

I applied both patches. Currently going through my test cycle. I'll send them to Linus Thursday or Friday.

Guenter

Can you pull the 3/4 and 4/4 patches.