pciehp: Remove the field controller->no_cmd_completed

After following recent cleanups by Bjorn:

http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/hotplug

2cc56f3 PCI: pciehp: Remove assumptions about which commands cause 40b9608 PCI: pciehp: Compute timeout from hotplug command start time 3461a06 PCI: pciehp: Wait for hotplug command completion lazily 4283c70 PCI: pciehp: Make pcie_wait_cmd() self-contained

the bitfield no_cmd_complete is not really needed anymore, as there is only a single occurance of its use. Hence remove the unnecessary bit field, and use existing macro NO_CMD_CMPL() instead.

Signed-off-by Rajat Jain <[email protected]>

Signed-off-by Rajat Jain <[email protected]>

Signed-off-by Guenter Roeck <[email protected]>

---
(This is rebased on top of Bjorn's pci/hotplug branch mentioned above)

 drivers/pci/hotplug/pciehp.h     |    1 -
 drivers/pci/hotplug/pciehp_hpc.c |   11 +----------
 2 files changed, 1 insertion(+), 11 deletions(-)

drivers/pci/hotplug/pciehp.h +0 -1

index c496258..9e5a9fb 100644
@@ -96,7 +96,6 @@ struct controller {
 	struct timer_list poll_timer;
 	unsigned long cmd_started;	/* jiffies */
 	unsigned int cmd_busy:1;
-	unsigned int no_cmd_complete:1;
 	unsigned int link_active_reporting:1;
 	unsigned int notification_enabled:1;
 	unsigned int power_fault_detected;

drivers/pci/hotplug/pciehp_hpc.c +1 -10

index a3a5c65..f7c3709 100644
@@ -140,7 +140,7 @@ static void pcie_wait_cmd(struct controller *ctrl)
 	 * If the controller does not generate notifications for command
 	 * completions, we never need to wait between writes.
 	 */
-	if (ctrl->no_cmd_complete)
+	if (NO_CMD_CMPL(ctrl))
 		return;
 
 	if (!ctrl->cmd_busy)

@@ -772,15 +772,6 @@ struct controller *pcie_init(struct pcie_device *dev)
 	init_waitqueue_head(&ctrl->queue);
 	dbg_ctrl(ctrl);
 
-	/*
-	 * Controller doesn't notify of command completion if the "No
-	 * Command Completed Support" bit is set in Slot Capabilities.
-	 * If set, it means the controller can accept hotplug commands
-	 * with no delay between them.
-	 */
-	if (NO_CMD_CMPL(ctrl))
-		ctrl->no_cmd_complete = 1;
-
 	/* Check if Data Link Layer Link Active Reporting is implemented */
 	pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap);
 	if (link_cap & PCI_EXP_LNKCAP_DLLLARC) {

Signature · 1 line

1.7.9.5