3.4.97-stable review

This is the start of the stable review cycle for the 3.4.97 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Jul 6 22:14:29 UTC 2014. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.97-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.4.97-rc1

Oleg Nesterov <[email protected]>
tracing: Fix syscall_*regfunc() vs copy_process() race

Tejun Heo <[email protected]>
ptrace,x86: force IRET path after a ptrace_stop()

Paul Bolle <[email protected]>
powerpc: fix typo 'CONFIG_PPC_CPU'

Paul Bolle <[email protected]>
powerpc: fix typo 'CONFIG_PMAC'

Gavin Shan <[email protected]>
powerpc/pseries: Fix overwritten PE state

Christoph Hellwig <[email protected]>
nfsd: getattr for FATTR4_WORD0_FILES_AVAIL needs the statfs buffer

J. Bruce Fields <[email protected]>
nfsd4: fix FREE_STATEID lockowner leak

Bart Van Assche <[email protected]>
IB/umad: Fix use-after-free on close

Bart Van Assche <[email protected]>
IB/umad: Fix error handling

Bart Van Assche <[email protected]>
IB/srp: Fix a sporadic crash triggered by cable pulling

Dennis Dalessandro <[email protected]>
IB/ipath: Translate legacy diagpkt into newer extended diagpkt

Mike Marciniszyn <[email protected]>
IB/qib: Fix port in pkey change event

Viresh Kumar <[email protected]>

    watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()

hujianyang <[email protected]>
UBIFS: Remove incorrect assertion in shrink_tnc()

Markos Chandras <[email protected]>
MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region

Alex Smith <[email protected]>
recordmcount/MIPS: Fix possible incorrect mcount_loc table entries in modules

Bjorn Helgaas <[email protected]>
PCI: Fix incorrect vgaarb conditional in WARN_ON()

Thomas Jarosch <[email protected]>
PCI: Add new ID for Intel GPU "spurious interrupt" quirk

Hans de Goede <[email protected]>
Input: elantech - deal with clickpads reporting right button events

-------------

Diffstat:

 Makefile                                     |  4 +-
 arch/mips/kernel/irq-msc01.c                 |  2 +-
 arch/powerpc/kernel/time.c                   |  2 +-
 arch/powerpc/lib/sstep.c                     |  2 +-
 arch/powerpc/platforms/pseries/eeh_pseries.c |  1 +
 arch/x86/include/asm/ptrace.h                | 16 ++++++
 drivers/infiniband/core/user_mad.c           | 75 ++++++++++++++++------------
 drivers/infiniband/hw/ipath/ipath_diag.c     |  4 ++
 drivers/infiniband/hw/qib/qib_mad.c          |  2 +-
 drivers/infiniband/ulp/srp/ib_srp.c          |  6 +++
 drivers/input/mouse/elantech.c               | 22 ++++++--
 drivers/pci/pci.c                            |  2 +-
 drivers/pci/quirks.c                         |  1 +
 drivers/watchdog/sp805_wdt.c                 |  4 +-
 fs/nfsd/nfs4state.c                          |  2 +-
 fs/nfsd/nfs4xdr.c                            |  4 +-
 fs/ubifs/shrinker.c                          |  1 -
 include/linux/ptrace.h                       |  3 ++
 include/trace/syscall.h                      | 15 ++++++
 kernel/fork.c                                |  2 +
 scripts/recordmcount.h                       |  4 +-
 21 files changed, 123 insertions(+), 51 deletions(-)

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede <[email protected]>

commit cd9e83e2754465856097f31c7ab933ce74c473f8 upstream.

At least the Dell Vostro 5470 elantech *clickpad* reports right button clicks when clicked in the right bottom area:

https://bugzilla.redhat.com/show_bug.cgi?id=1103528

This is different from how (elantech) clickpads normally operate, normally no matter where the user clicks on the pad the pad always reports a left button event, since there is only 1 hardware button beneath the path.

It looks like Dell has put 2 buttons under the pad, one under each bottom corner, causing this.

Since this however still clearly is a real clickpad hardware-wise, we still want to report it as such to userspace, so that things like finger movement in the bottom area can be properly ignored as it should be on clickpads.

So deal with this weirdness by simply mapping a right click to a left click on elantech clickpads. As an added advantage this is something which we can simply do on all elantech clickpads, so no need to add special quirks for this weird model.

---
 drivers/input/mouse/elantech.c |   22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

@@ -472,8 +472,15 @@ static void elantech_report_absolute_v3(
 	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
 	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
 	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
-	input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
-	input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+
+	/* For clickpads map both buttons to BTN_LEFT */
+	if (etd->fw_version & 0x001000) {
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
+	} else {
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+		input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+	}
+
 	input_report_abs(dev, ABS_PRESSURE, pres);
 	input_report_abs(dev, ABS_TOOL_WIDTH, width);
 

@@ -483,10 +490,17 @@ static void elantech_report_absolute_v3(
 static void elantech_input_sync_v4(struct psmouse *psmouse)
 {
 	struct input_dev *dev = psmouse->dev;
+	struct elantech_data *etd = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 
-	input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
-	input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+	/* For clickpads map both buttons to BTN_LEFT */
+	if (etd->fw_version & 0x001000) {
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
+	} else {
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+		input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+	}
+
 	input_mt_report_pointer_emulation(dev, true);
 	input_sync(dev);
 }

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Jarosch <[email protected]>

commit 7c82126a94e69bbbac586f0249e7ef11e681246c upstream.

After a CPU upgrade while keeping the same mainboard, we faced "spurious interrupt" problems again.

It turned out that the new CPU also featured a new GPU with a different PCI ID.

Add this PCI ID to the quirk table. Probably all other Intel GPU PCI IDs are affected, too, but I don't want to add them without a test system.

See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs") for some history.

---
 drivers/pci/quirks.c |    1 +
 1 file changed, 1 insertion(+)

@@ -2921,6 +2921,7 @@ static void __devinit disable_igfx_irq(s
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
 
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <[email protected]>

commit 67ebd8140dc8923c65451fa0f6a8eee003c4dcd3 upstream.

3448a19da479 "vgaarb: use bridges to control VGA routing where possible" added the "flags & PCI_VGA_STATE_CHANGE_DECODES" condition to an existing WARN_ON(), but used bitwise AND (&) instead of logical AND (&&), so the condition is never true. Replace with logical AND.

Found by Coverity (CID 142811).

---
 drivers/pci/pci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -3610,7 +3610,7 @@ int pci_set_vga_state(struct pci_dev *de
 	u16 cmd;
 	int rc;
 
-	WARN_ON((flags & PCI_VGA_STATE_CHANGE_DECODES) & (command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)));
+	WARN_ON((flags & PCI_VGA_STATE_CHANGE_DECODES) && (command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)));
 
 	/* ARCH specific VGA enables */
 	rc = pci_set_vga_state_arch(dev, decode, command_bits, flags);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Smith <[email protected]>

commit 91ad11d7cc6f4472ebf177a6252fbf0fd100d798 upstream.

On MIPS calls to _mcount in modules generate 2 instructions to load the _mcount address (and therefore 2 relocations). The mcount_loc table should only reference the first of these, so the second is filtered out by checking the relocation offset and ignoring ones that immediately follow the previous one seen.

However if a module has an _mcount call at offset 0, the second relocation would not be filtered out due to old_r_offset == 0 being taken to mean that the current relocation is the first one seen, and both would end up in the mcount_loc table.

This results in ftrace_make_nop() patching both (adjacent) instructions to branches over the _mcount call sequence like so:

  0xffffffffc08a8000:  04 00 00 10     b       0xffffffffc08a8014
  0xffffffffc08a8004:  04 00 00 10     b       0xffffffffc08a8018
  0xffffffffc08a8008:  2d 08 e0 03     move    at,ra

...

The second branch is in the delay slot of the first, which is defined to be unpredictable - on the platform on which this bug was encountered, it triggers a reserved instruction exception.

Fix by initializing old_r_offset to ~0 and using that instead of 0 to determine whether the current relocation is the first seen.

Patchwork: https://patchwork.linux-mips.org/patch/7098/

---
 scripts/recordmcount.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -163,11 +163,11 @@ static int mcount_adjust = 0;
 
 static int MIPS_is_fake_mcount(Elf_Rel const *rp)
 {
-	static Elf_Addr old_r_offset;
+	static Elf_Addr old_r_offset = ~(Elf_Addr)0;
 	Elf_Addr current_r_offset = _w(rp->r_offset);
 	int is_fake;
 
-	is_fake = old_r_offset &&
+	is_fake = (old_r_offset != ~(Elf_Addr)0) &&
 		(current_r_offset - old_r_offset == MIPS_FAKEMCOUNT_OFFSET);
 	old_r_offset = current_r_offset;
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Markos Chandras <[email protected]>

commit ab6c15bc6620ebe220970cc040b29bcb2757f373 upstream.

Previously, the lower limit for the MIPS SC initialization loop was set incorrectly allowing one extra loop leading to writes beyond the MSC ioremap'd space. More precisely, the value of the 'imp' in the last loop increased beyond the msc_irqmap_t boundaries and as a result of which, the 'n' variable was loaded with an incorrect value. This value was used later on to calculate the offset in the MSC01_IC_SUP which led to random crashes like the following one:

CPU 0 Unable to handle kernel paging request at virtual address e75c0200, epc == 8058dba4, ra == 8058db90
[...]

Call Trace:
[<8058dba4>] init_msc_irqs+0x104/0x154
[<8058b5bc>] arch_init_irq+0xd8/0x154
[<805897b0>] start_kernel+0x220/0x36c

Kernel panic - not syncing: Attempted to kill the idle task!

This patch fixes the problem

Patchwork: https://patchwork.linux-mips.org/patch/7118/

---
 arch/mips/kernel/irq-msc01.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -131,7 +131,7 @@ void __init init_msc_irqs(unsigned long
 
 	board_bind_eic_interrupt = &msc_bind_eic_interrupt;
 
-	for (; nirq >= 0; nirq--, imp++) {
+	for (; nirq > 0; nirq--, imp++) {
 		int n = imp->im_irq;
 
 		switch (imp->im_type) {

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: hujianyang <[email protected]>

commit 72abc8f4b4e8574318189886de627a2bfe6cd0da upstream.

I hit the same assert failed as Dolev Raviv reported in Kernel v3.10 shows like this:

[ 9641.164028] UBIFS assert failed in shrink_tnc at 131 (pid 13297)
[ 9641.234078] CPU: 1 PID: 13297 Comm: mmap.test Tainted: G           O 3.10.40 #1
[ 9641.234116] [<c0011a6c>] (unwind_backtrace+0x0/0x12c) from [<c000d0b0>] (show_stack+0x20/0x24)
[ 9641.234137] [<c000d0b0>] (show_stack+0x20/0x24) from [<c0311134>] (dump_stack+0x20/0x28)
[ 9641.234188] [<c0311134>] (dump_stack+0x20/0x28) from [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs])
[ 9641.234265] [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) from [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs])
[ 9641.234307] [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) from [<c00cdad8>] (shrink_slab+0x1d4/0x2f8)
[ 9641.234327] [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) from [<c00d03d0>] (do_try_to_free_pages+0x300/0x544)
[ 9641.234344] [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) from [<c00d0a44>] (try_to_free_pages+0x2d0/0x398)
[ 9641.234363] [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) from [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8)
[ 9641.234382] [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) from [<c00f62d8>] (new_slab+0x78/0x238)
[ 9641.234400] [<c00f62d8>] (new_slab+0x78/0x238) from [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c)
[ 9641.234419] [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) from [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188)
[ 9641.234459] [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) from [<bf227908>] (do_readpage+0x168/0x468 [ubifs])
[ 9641.234553] [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) from [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs])
[ 9641.234606] [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) from [<c00c17c0>] (filemap_fault+0x304/0x418)
[ 9641.234638] [<c00c17c0>] (filemap_fault+0x304/0x418) from [<c00de694>] (__do_fault+0xd4/0x530)
[ 9641.234665] [<c00de694>] (__do_fault+0xd4/0x530) from [<c00e10c0>] (handle_pte_fault+0x480/0xf54)
[ 9641.234690] [<c00e10c0>] (handle_pte_fault+0x480/0xf54) from [<c00e2bf8>] (handle_mm_fault+0x140/0x184)
[ 9641.234716] [<c00e2bf8>] (handle_mm_fault+0x140/0x184) from [<c0316688>] (do_page_fault+0x150/0x3ac)
[ 9641.234737] [<c0316688>] (do_page_fault+0x150/0x3ac) from [<c000842c>] (do_DataAbort+0x3c/0xa0)
[ 9641.234759] [<c000842c>] (do_DataAbort+0x3c/0xa0) from [<c0314e38>] (__dabt_usr+0x38/0x40)

After analyzing the code, I found a condition that may cause this failed in correct operations. Thus, I think this assertion is wrong and should be removed.

Suppose there are two clean znodes and one dirty znode in TNC. So the per-filesystem atomic_t @clean_zn_cnt is (2). If commit start, dirty_znode is set to COW_ZNODE in get_znodes_to_commit() in case of potentially ops on this znode. We clear COW bit and DIRTY bit in write_index() without @tnc_mutex locked. We don't increase @clean_zn_cnt in this place. As the comments in write_index() shows, if another process hold @tnc_mutex and dirty this znode after we clean it, @clean_zn_cnt would be decreased to (1). We will increase @clean_zn_cnt to (2) with @tnc_mutex locked in free_obsolete_znodes() to keep it right.

If shrink_tnc() performs between decrease and increase, it will release other 2 clean znodes it holds and found @clean_zn_cnt is less than zero (1 - 2 = -1), then hit the assertion. Because free_obsolete_znodes() will soon correct @clean_zn_cnt and no harm to fs in this case, I think this assertion could be removed.

2 clean zondes and 1 dirty znode, @clean_zn_cnt == 2

Thread A (commit) Thread B (write or others) Thread C (shrinker)
->write_index
->clear_bit(DIRTY_NODE)
->clear_bit(COW_ZNODE)

            @clean_zn_cnt == 2
                          ->mutex_locked(&tnc_mutex)
                          ->dirty_cow_znode
                              ->!ubifs_zn_cow(znode)
                              ->!test_and_set_bit(DIRTY_NODE)
                              ->atomic_dec(&clean_zn_cnt)
                          ->mutex_unlocked(&tnc_mutex)

            @clean_zn_cnt == 1
                                                           ->mutex_locked(&tnc_mutex)
                                                           ->shrink_tnc
                                                             ->destroy_tnc_subtree
                                                             ->atomic_sub(&clean_zn_cnt, 2)
                                                             ->ubifs_assert  <- hit
                                                           ->mutex_unlocked(&tnc_mutex)

            @clean_zn_cnt == -1

->mutex_lock(&tnc_mutex)
->free_obsolete_znodes
->atomic_inc(&clean_zn_cnt)
->mutux_unlock(&tnc_mutex)

            @clean_zn_cnt == 0 (correct after shrink)

---
 fs/ubifs/shrinker.c |    1 -
 1 file changed, 1 deletion(-)

@@ -128,7 +128,6 @@ static int shrink_tnc(struct ubifs_info
 			freed = ubifs_destroy_tnc_subtree(znode);
 			atomic_long_sub(freed, &ubifs_clean_zn_cnt);
 			atomic_long_sub(freed, &c->clean_zn_cnt);
-			ubifs_assert(atomic_long_read(&c->clean_zn_cnt) >= 0);
 			total_freed += freed;
 			znode = zprev;
 		}

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <[email protected]>

commit 938626d96a3ffb9eb54552bb0d3a4f2b30ffdeb0 upstream.

Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct watchdog_device' passed to it. sp805 was rather setting this in a local variable. Fix it.

---
 drivers/watchdog/sp805_wdt.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

@@ -62,7 +62,6 @@
  * @adev: amba device structure of wdt
  * @status: current status of wdt
  * @load_val: load value to be set for current timeout
- * @timeout: current programmed timeout
  */
 struct sp805_wdt {
 	spinlock_t			lock;

@@ -73,7 +72,6 @@ struct sp805_wdt {
 	#define WDT_BUSY		0
 	#define WDT_CAN_BE_CLOSED	1
 	unsigned int			load_val;
-	unsigned int			timeout;
 };
 
 /* local variables */

@@ -101,7 +99,7 @@ static void wdt_setload(unsigned int tim
 	spin_lock(&wdt->lock);
 	wdt->load_val = load;
 	/* roundup timeout to closest positive integer value */
-	wdt->timeout = div_u64((load + 1) * 2 + (rate / 2), rate);
+	wdd->timeout = div_u64((load + 1) * 2 + (rate / 2), rate);
 	spin_unlock(&wdt->lock);
 }
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn <[email protected]>

commit 911eccd284d13d78c92ec4f1f1092c03457d732a upstream.

The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE.

As of the dual port qib QDR card, this is not necessarily correct.

Change to use the port as specified in the call.

---
 drivers/infiniband/hw/qib/qib_mad.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1005,7 +1005,7 @@ static int set_pkeys(struct qib_devdata
 
 		event.event = IB_EVENT_PKEY_CHANGE;
 		event.device = &dd->verbs_dev.ibdev;
-		event.element.port_num = 1;
+		event.element.port_num = port;
 		ib_dispatch_event(&event);
 	}
 	return 0;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dennis Dalessandro <[email protected]>

commit 7e6d3e5c70f13874fb06e6b67696ed90ce79bd48 upstream.

This patch addresses an issue where the legacy diagpacket is sent in from the user, but the driver operates on only the extended diagpkt. This patch specifically initializes the extended diagpkt based on the legacy packet.

---
 drivers/infiniband/hw/ipath/ipath_diag.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -346,6 +346,10 @@ static ssize_t ipath_diagpkt_write(struc
 			ret = -EFAULT;
 			goto bail;
 		}
+		dp.len = odp.len;
+		dp.unit = odp.unit;
+		dp.data = odp.data;
+		dp.pbc_wd = 0;
 	} else {
 		ret = -EINVAL;
 		goto bail;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <[email protected]>

commit 024ca90151f5e4296d30f72c13ff9a075e23c9ec upstream.

Avoid that the loops that iterate over the request ring can encounter a pointer to a SCSI command in req->scmnd that is no longer associated with that request. If the function srp_unmap_data() is invoked twice for a SCSI command that is not in flight then that would cause ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument, resulting in a kernel oops.

Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069

---
 drivers/infiniband/ulp/srp/ib_srp.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -1371,6 +1371,12 @@ err_unmap:
 err_iu:
 	srp_put_tx_iu(target, iu, SRP_IU_CMD);
 
+	/*
+	 * Avoid that the loops that iterate over the request ring can
+	 * encounter a dangling SCSI command pointer.
+	 */
+	req->scmnd = NULL;
+
 	spin_lock_irqsave(&target->lock, flags);
 	list_add(&req->list, &target->free_reqs);
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <[email protected]>

commit 8ec0a0e6b58218bdc1db91dd70ebfcd6ad8dd6cd upstream.

Avoid leaking a kref count in ib_umad_open() if port->ib_dev == NULL or if nonseekable_open() fails.

Avoid leaking a kref count, that sm_sem is kept down and also that the IB_PORT_SM capability mask is not cleared in ib_umad_sm_open() if nonseekable_open() fails.

Since container_of() never returns NULL, remove the code that tests whether container_of() returns NULL.

Moving the kref_get() call from the start of ib_umad_*open() to the end is safe since it is the responsibility of the caller of these functions to ensure that the cdev pointer remains valid until at least when these functions return.

[[email protected]: rework a bit to reduce the amount of code changed]

[ nonseekable_open() can't actually fail, but.... - Roland ]

---
 drivers/infiniband/core/user_mad.c |   49 ++++++++++++++++++++-----------------
 1 file changed, 27 insertions(+), 22 deletions(-)

@@ -780,27 +780,19 @@ static int ib_umad_open(struct inode *in
 {
 	struct ib_umad_port *port;
 	struct ib_umad_file *file;
-	int ret;
+	int ret = -ENXIO;
 
 	port = container_of(inode->i_cdev, struct ib_umad_port, cdev);
-	if (port)
-		kref_get(&port->umad_dev->ref);
-	else
-		return -ENXIO;
 
 	mutex_lock(&port->file_mutex);
 
-	if (!port->ib_dev) {
-		ret = -ENXIO;
+	if (!port->ib_dev)
 		goto out;
-	}
 
+	ret = -ENOMEM;
 	file = kzalloc(sizeof *file, GFP_KERNEL);
-	if (!file) {
-		kref_put(&port->umad_dev->ref, ib_umad_release_dev);
-		ret = -ENOMEM;
+	if (!file)
 		goto out;
-	}
 
 	mutex_init(&file->mutex);
 	spin_lock_init(&file->send_lock);

@@ -814,6 +806,13 @@ static int ib_umad_open(struct inode *in
 	list_add_tail(&file->port_list, &port->file_list);
 
 	ret = nonseekable_open(inode, filp);
+	if (ret) {
+		list_del(&file->port_list);
+		kfree(file);
+		goto out;
+	}
+
+	kref_get(&port->umad_dev->ref);
 
 out:
 	mutex_unlock(&port->file_mutex);

@@ -880,10 +879,6 @@ static int ib_umad_sm_open(struct inode
 	int ret;
 
 	port = container_of(inode->i_cdev, struct ib_umad_port, sm_cdev);
-	if (port)
-		kref_get(&port->umad_dev->ref);
-	else
-		return -ENXIO;
 
 	if (filp->f_flags & O_NONBLOCK) {
 		if (down_trylock(&port->sm_sem)) {

@@ -898,17 +893,27 @@ static int ib_umad_sm_open(struct inode
 	}
 
 	ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props);
-	if (ret) {
-		up(&port->sm_sem);
-		goto fail;
-	}
+	if (ret)
+		goto err_up_sem;
 
 	filp->private_data = port;
 
-	return nonseekable_open(inode, filp);
+	ret = nonseekable_open(inode, filp);
+	if (ret)
+		goto err_clr_sm_cap;
+
+	kref_get(&port->umad_dev->ref);
+
+	return 0;
+
+err_clr_sm_cap:
+	swap(props.set_port_cap_mask, props.clr_port_cap_mask);
+	ib_modify_port(port->ib_dev, port->port_num, 0, &props);
+
+err_up_sem:
+	up(&port->sm_sem);
 
 fail:
-	kref_put(&port->umad_dev->ref, ib_umad_release_dev);
 	return ret;
 }
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <[email protected]>

commit 60e1751cb52cc6d1ae04b6bd3c2b96e770b5823f upstream.

Avoid that closing /dev/infiniband/umad<n> or /dev/infiniband/issm<n> triggers a use-after-free. __fput() invokes f_op->release() before it invokes cdev_put(). Make sure that the ib_umad_device structure is freed by the cdev_put() call instead of f_op->release(). This avoids that changing the port mode from IB into Ethernet and back to IB followed by restarting opensmd triggers the following kernel oops:

    general protection fault: 0000 [#1] PREEMPT SMP
    RIP: 0010:[<ffffffff810cc65c>]  [<ffffffff810cc65c>] module_put+0x2c/0x170
    Call Trace:
     [<ffffffff81190f20>] cdev_put+0x20/0x30
     [<ffffffff8118e2ce>] __fput+0x1ae/0x1f0
     [<ffffffff8118e35e>] ____fput+0xe/0x10
     [<ffffffff810723bc>] task_work_run+0xac/0xe0
     [<ffffffff81002a9f>] do_notify_resume+0x9f/0xc0
     [<ffffffff814b8398>] int_signal+0x12/0x17

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051

---
 drivers/infiniband/core/user_mad.c |   30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

@@ -98,7 +98,7 @@ struct ib_umad_port {
 
 struct ib_umad_device {
 	int                  start_port, end_port;
-	struct kref          ref;
+	struct kobject       kobj;
 	struct ib_umad_port  port[0];
 };
 

@@ -134,14 +134,18 @@ static DECLARE_BITMAP(dev_map, IB_UMAD_M
 static void ib_umad_add_one(struct ib_device *device);
 static void ib_umad_remove_one(struct ib_device *device);
 
-static void ib_umad_release_dev(struct kref *ref)
+static void ib_umad_release_dev(struct kobject *kobj)
 {
 	struct ib_umad_device *dev =
-		container_of(ref, struct ib_umad_device, ref);
+		container_of(kobj, struct ib_umad_device, kobj);
 
 	kfree(dev);
 }
 
+static struct kobj_type ib_umad_dev_ktype = {
+	.release = ib_umad_release_dev,
+};
+
 static int hdr_size(struct ib_umad_file *file)
 {
 	return file->use_pkey_index ? sizeof (struct ib_user_mad_hdr) :

@@ -812,7 +816,7 @@ static int ib_umad_open(struct inode *in
 		goto out;
 	}
 
-	kref_get(&port->umad_dev->ref);
+	kobject_get(&port->umad_dev->kobj);
 
 out:
 	mutex_unlock(&port->file_mutex);

@@ -851,7 +855,7 @@ static int ib_umad_close(struct inode *i
 	mutex_unlock(&file->port->file_mutex);
 
 	kfree(file);
-	kref_put(&dev->ref, ib_umad_release_dev);
+	kobject_put(&dev->kobj);
 
 	return 0;
 }

@@ -902,7 +906,7 @@ static int ib_umad_sm_open(struct inode
 	if (ret)
 		goto err_clr_sm_cap;
 
-	kref_get(&port->umad_dev->ref);
+	kobject_get(&port->umad_dev->kobj);
 
 	return 0;
 

@@ -932,7 +936,7 @@ static int ib_umad_sm_close(struct inode
 
 	up(&port->sm_sem);
 
-	kref_put(&port->umad_dev->ref, ib_umad_release_dev);
+	kobject_put(&port->umad_dev->kobj);
 
 	return ret;
 }

@@ -1000,6 +1004,7 @@ static int find_overflow_devnum(void)
 }
 
 static int ib_umad_init_port(struct ib_device *device, int port_num,
+			     struct ib_umad_device *umad_dev,
 			     struct ib_umad_port *port)
 {
 	int devnum;

@@ -1032,6 +1037,7 @@ static int ib_umad_init_port(struct ib_d
 
 	cdev_init(&port->cdev, &umad_fops);
 	port->cdev.owner = THIS_MODULE;
+	port->cdev.kobj.parent = &umad_dev->kobj;
 	kobject_set_name(&port->cdev.kobj, "umad%d", port->dev_num);
 	if (cdev_add(&port->cdev, base, 1))
 		goto err_cdev;

@@ -1050,6 +1056,7 @@ static int ib_umad_init_port(struct ib_d
 	base += IB_UMAD_MAX_PORTS;
 	cdev_init(&port->sm_cdev, &umad_sm_fops);
 	port->sm_cdev.owner = THIS_MODULE;
+	port->sm_cdev.kobj.parent = &umad_dev->kobj;
 	kobject_set_name(&port->sm_cdev.kobj, "issm%d", port->dev_num);
 	if (cdev_add(&port->sm_cdev, base, 1))
 		goto err_sm_cdev;

@@ -1143,7 +1150,7 @@ static void ib_umad_add_one(struct ib_de
 	if (!umad_dev)
 		return;
 
-	kref_init(&umad_dev->ref);
+	kobject_init(&umad_dev->kobj, &ib_umad_dev_ktype);
 
 	umad_dev->start_port = s;
 	umad_dev->end_port   = e;

@@ -1151,7 +1158,8 @@ static void ib_umad_add_one(struct ib_de
 	for (i = s; i <= e; ++i) {
 		umad_dev->port[i - s].umad_dev = umad_dev;
 
-		if (ib_umad_init_port(device, i, &umad_dev->port[i - s]))
+		if (ib_umad_init_port(device, i, umad_dev,
+				      &umad_dev->port[i - s]))
 			goto err;
 	}
 

@@ -1163,7 +1171,7 @@ err:
 	while (--i >= s)
 		ib_umad_kill_port(&umad_dev->port[i - s]);
 
-	kref_put(&umad_dev->ref, ib_umad_release_dev);
+	kobject_put(&umad_dev->kobj);
 }
 
 static void ib_umad_remove_one(struct ib_device *device)

@@ -1177,7 +1185,7 @@ static void ib_umad_remove_one(struct ib
 	for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i)
 		ib_umad_kill_port(&umad_dev->port[i]);
 
-	kref_put(&umad_dev->ref, ib_umad_release_dev);
+	kobject_put(&umad_dev->kobj);
 }
 
 static char *umad_devnode(struct device *dev, umode_t *mode)

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <[email protected]>

commit 48385408b45523d9a432c66292d47ef43efcbb94 upstream.

27b11428b7de ("nfsd4: remove lockowner when removing lock stateid") introduced a memory leak.

---
 fs/nfsd/nfs4state.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -3485,7 +3485,7 @@ nfsd4_free_lock_stateid(struct nfs4_ol_s
 	 * correspondance, and we have to delete the lockowner when we
 	 * delete the lock stateid:
 	 */
-	unhash_lockowner(lo);
+	release_lockowner(lo);
 	return nfs_ok;
 }
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <[email protected]>

commit 12337901d654415d9f764b5f5ba50052e9700f37 upstream.

Note nobody's ever noticed because the typical client probably never requests FILES_AVAIL without also requesting something else on the list.

---
 fs/nfsd/nfs4xdr.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -2032,8 +2032,8 @@ nfsd4_encode_fattr(struct svc_fh *fhp, s
 	err = vfs_getattr(exp->ex_path.mnt, dentry, &stat);
 	if (err)
 		goto out_nfserr;
-	if ((bmval0 & (FATTR4_WORD0_FILES_FREE | FATTR4_WORD0_FILES_TOTAL |
-			FATTR4_WORD0_MAXNAME)) ||
+	if ((bmval0 & (FATTR4_WORD0_FILES_AVAIL | FATTR4_WORD0_FILES_FREE |
+			FATTR4_WORD0_FILES_TOTAL | FATTR4_WORD0_MAXNAME)) ||
 	    (bmval1 & (FATTR4_WORD1_SPACE_AVAIL | FATTR4_WORD1_SPACE_FREE |
 		       FATTR4_WORD1_SPACE_TOTAL))) {
 		err = vfs_statfs(&path, &statfs);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gavin Shan <[email protected]>

commit 54f112a3837d4e7532bbedbbbf27c0de277be510 upstream.

In pseries_eeh_get_state(), EEH_STATE_UNAVAILABLE is always overwritten by EEH_STATE_NOT_SUPPORT because of the missed "break" there. The patch fixes the issue.

---
 arch/powerpc/platforms/pseries/eeh_pseries.c |    1 +
 1 file changed, 1 insertion(+)

@@ -319,6 +319,7 @@ static int pseries_eeh_get_state(struct
 			} else {
 				result = EEH_STATE_NOT_SUPPORT;
 			}
+			break;
 		default:
 			result = EEH_STATE_NOT_SUPPORT;
 		}

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Bolle <[email protected]>

commit 6e0fdf9af216887e0032c19d276889aad41cad00 upstream.

Commit b0d278b7d3ae ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending") added a check for CONFIG_PMAC were a check for CONFIG_PPC_PMAC was clearly intended.

---
 arch/powerpc/kernel/time.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -496,7 +496,7 @@ void timer_interrupt(struct pt_regs * re
 
 	__get_cpu_var(irq_stat).timer_irqs++;
 
-#if defined(CONFIG_PPC32) && defined(CONFIG_PMAC)
+#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC)
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
 #endif

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Bolle <[email protected]>

commit b69a1da94f3d1589d1942b5d1b384d8cfaac4500 upstream.

Commit cd64d1697cf0 ("powerpc: mtmsrd not defined") added a check for CONFIG_PPC_CPU were a check for CONFIG_PPC_FPU was clearly intended.

---
 arch/powerpc/lib/sstep.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1395,7 +1395,7 @@ int __kprobes emulate_step(struct pt_reg
 				regs->gpr[rd] = byterev_4(val);
 			goto ldst_done;
 
-#ifdef CONFIG_PPC_CPU
+#ifdef CONFIG_PPC_FPU
 		case 535:	/* lfsx */
 		case 567:	/* lfsux */
 			if (!(regs->msr & MSR_FP))

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tejun Heo <[email protected]>

commit b9cd18de4db3c9ffa7e17b0dc0ca99ed5aa4d43a upstream.

The 'sysret' fastpath does not correctly restore even all regular registers, much less any segment registers or reflags values. That is very much part of why it's faster than 'iret'.

Normally that isn't a problem, because the normal ptrace() interface catches the process using the signal handler infrastructure, which always returns with an iret.

However, some paths can get caught using ptrace_event() instead of the signal path, and for those we need to make sure that we aren't going to return to user space using 'sysret'. Otherwise the modifications that may have been done to the register set by the tracer wouldn't necessarily take effect.

Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from arch_ptrace_stop_needed() which is invoked from ptrace_stop().

---
 arch/x86/include/asm/ptrace.h |   16 ++++++++++++++++
 include/linux/ptrace.h        |    3 +++
 2 files changed, 19 insertions(+)

@@ -286,6 +286,22 @@ static inline unsigned long regs_get_ker
 
 #define ARCH_HAS_USER_SINGLE_STEP_INFO
 
+/*
+ * When hitting ptrace_stop(), we cannot return using SYSRET because
+ * that does not restore the full CPU state, only a minimal set.  The
+ * ptracer can change arbitrary register values, which is usually okay
+ * because the usual ptrace stops run off the signal delivery path which
+ * forces IRET; however, ptrace_event() stops happen in arbitrary places
+ * in the kernel and don't force IRET path.
+ *
+ * So force IRET path after a ptrace stop.
+ */
+#define arch_ptrace_stop_needed(code, info)				\
+({									\
+	set_thread_flag(TIF_NOTIFY_RESUME);				\
+	false;								\
+})
+
 struct user_desc;
 extern int do_get_thread_area(struct task_struct *p, int idx,
 			      struct user_desc __user *info);

@@ -379,6 +379,9 @@ static inline void user_single_step_sigi
  * calling arch_ptrace_stop() when it would be superfluous.  For example,
  * if the thread has not been back to user mode since the last stop, the
  * thread state might indicate that nothing needs to be done.
+ *
+ * This is guaranteed to be invoked once before a task stops for ptrace and
+ * may include arch-specific operations necessary prior to a ptrace stop.
  */
 #define arch_ptrace_stop_needed(code, info)	(0)
 #endif

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <[email protected]>

commit 4af4206be2bd1933cae20c2b6fb2058dbc887f7c upstream.

syscall_regfunc() and syscall_unregfunc() should set/clear TIF_SYSCALL_TRACEPOINT system-wide, but do_each_thread() can race with copy_process() and miss the new child which was not added to the process/thread lists yet.

Change copy_process() to update the child's TIF_SYSCALL_TRACEPOINT under tasklist.

---
 include/trace/syscall.h |   15 +++++++++++++++
 kernel/fork.c           |    2 ++
 2 files changed, 17 insertions(+)

@@ -4,6 +4,7 @@
 #include <linux/tracepoint.h>
 #include <linux/unistd.h>
 #include <linux/ftrace_event.h>
+#include <linux/thread_info.h>
 
 #include <asm/ptrace.h>
 

@@ -54,4 +55,18 @@ int perf_sysexit_enable(struct ftrace_ev
 void perf_sysexit_disable(struct ftrace_event_call *call);
 #endif
 
+#if defined(CONFIG_TRACEPOINTS) && defined(CONFIG_HAVE_SYSCALL_TRACEPOINTS)
+static inline void syscall_tracepoint_update(struct task_struct *p)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		set_tsk_thread_flag(p, TIF_SYSCALL_TRACEPOINT);
+	else
+		clear_tsk_thread_flag(p, TIF_SYSCALL_TRACEPOINT);
+}
+#else
+static inline void syscall_tracepoint_update(struct task_struct *p)
+{
+}
+#endif
+
 #endif /* _TRACE_SYSCALL_H */

@@ -1441,7 +1441,9 @@ static struct task_struct *copy_process(
 
 	total_forks++;
 	spin_unlock(&current->sighand->siglock);
+	syscall_tracepoint_update(p);
 	write_unlock_irq(&tasklist_lock);
+
 	proc_fork_connector(p);
 	cgroup_post_fork(p);
 	if (clone_flags & CLONE_THREAD)

Build results:

	total: 137 pass: 111 skipped: 20 fail: 6

Failed builds:
alpha:allmodconfig
arm:spear6xx_defconfig
score:defconfig
sparc64:allmodconfig
unicore32:defconfig
xtensa:allmodconfi

Qemu tests all passed.

Results are as expected.

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

At Fri, 04 Jul 2014 22:39:01 -0700,

This kernel passed my test.

- Test Cases:
- Build this kernel.
- Boot this kernel.
- Build the latest mainline kernel with this kernel.

- Test Tool:
https://github.com/satoru-takeuchi/test-linux-stable

- Test Result (kernel .config, ktest config and test log):
http://satoru-takeuchi.org/test-linux-stable/results/<version>-<test datetime>.tar.xz

- Build Environment:
- OS: Debian Jessy x86_64
- CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
- memory: 8GB

- Test Target Environment:
- Debian Jessy x86_64 (KVM guest on the Build Environment)
- # of vCPU: 2
- memory: 2GB

Satoru

Great, thanks for testing and letting me know.

greg k-h

111 skipped? Did you add a bunch more targets? Why skip them?

thanks for testing,

greg k-h

Doh, that is 20 skipped, nevermind...

But, in looking at your site, it seems that there are always at least 7 that are "skipped", for all kernel versions. Why?

thanks,

greg k-h

lowest 'skipped' value is actually 4, for 3.14.

'skipped' means that a configuration does not apply for this kernel version. As I am adding more recent configurations, the number of 'skipped' builds gets larger for older kernels. Similar, as configurations are dropped from newer kernels, the number gets larger for newer kernels as well.

I'll see if I can change the output and not display the 'skipped' value in the final summary; it doesn't really provide value and just creates confusion.

Guenter