ARM: m28evk: add needed commands and options

PATCH New Marek Vasut 3 participants 9 messages Jun 26, 2014 – Jul 9, 2014

Share & tools

Marek Vasut

author

2014-06-26 09:01 UTC #0 lore raw

PATCH 1/6 ARM: m28evk: add needed commands and options

- "env ask", "env grep" and "setexpr" are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images

Signed-off-by Marek Vasut <[email protected]>

Cc Stefano Babic <[email protected]>

---
 include/configs/m28evk.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

include/configs/m28evk.h +10 -2

index 3e387c4..c3bdd4b 100644
@@ -12,17 +12,25 @@
 #define MACH_TYPE_M28EVK	3613
 #define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK
 
+#define CONFIG_FIT
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
 #include <config_cmd_default.h>
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DOS_PARTITION
+#define CONFIG_FAT_WRITE
 
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BMP
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_GPIO
 #define CONFIG_CMD_GREPENV

@@ -145,7 +153,7 @@
 #define	CONFIG_BMP_16BPP
 #define	CONFIG_VIDEO_BMP_RLE8
 #define	CONFIG_VIDEO_BMP_GZIP
-#define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(512 << 10)
+#define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
 #endif
 
 /* Booting Linux */

Signature · 1 line

2.0.0.rc2

Marek Vasut

author

2014-07-09 12:09 UTC #1 lore raw

PATCH 1/6 ARM: m28evk: add needed commands and options

Quoted 9 lines · Marek Vasut

- "env ask", "env grep" and "setexpr" are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images
Signed-off-by Marek Vasut <[email protected]>
Cc Stefano Babic <[email protected]>

Tom, can you please pick those 6 for .07 ? Also, as pestered on IRC, which exact patches do I need to pick from Filipe ? He ignores my email inquiry ...

Best regards,
Marek Vasut

Tom Rini

2014-07-09 12:42 UTC #2 lore raw

PATCH 1/6 ARM: m28evk: add needed commands and options

Quoted 8 lines · Marek Vasut

Quoted 7 lines · Marek Vasut
- "env ask", "env grep" and "setexpr" are needed for commissioning
- add support for ext4 file systems
- adjust default environment to use ext4 commands
- add write support for (V)FAT and EXT4
- add bitmap and splashscreen support
- print timestamp information for images

Quoted 6 lines

Quoted 2 lines
Signed-off-by Marek Vasut <[email protected]>
Cc Stefano Babic <[email protected]>
Tom, can you please pick those 6 for .07 ? Also, as pestered on IRC, which exact patches do I need to pick from Filipe ? He ignores my email inquiry ...

If Stefano gives me a PR, since these are i.MX things, yes.

Signature · 8 lines

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140709/5d38a847/attachment.pgp>

Stefano Babic

2014-07-09 12:49 UTC #3 lore raw

PATCH 1/6 ARM: m28evk: add needed commands and options

Quoted 9 lines · Tom Rini

Quoted 7 lines · Marek Vasut
Quoted 6 lines · Marek Vasut
- "env ask", "env grep" and "setexpr" are needed for commissioning - add support for ext4 file systems - adjust default environment to use ext4 commands - add write support for (V)FAT and EXT4 - add bitmap and splashscreen support - print timestamp information for images

Quoted 9 lines

Quoted 6 lines
Quoted 2 lines
Signed-off-by Marek Vasut <[email protected]> Cc: Stefano Babic
<[email protected]>
Tom, can you please pick those 6 for .07 ? Also, as pestered on IRC, which exact patches do I need to pick from Filipe ? He ignores my email inquiry ...
If Stefano gives me a PR, since these are i.MX things, yes.

ok, I'll provide it.

Stefano

Signature · 5 lines

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Marek Vasut

author

2014-06-26 09:01 UTC #4 lore raw

PATCH 2/6 ARM: m28evk: Adjust mtdparts

In reply to Marek Vasut

Adjust the mtdparts to also consider factory-programmed config block.

Signed-off-by Marek Vasut <[email protected]>

---
 include/configs/m28evk.h | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

include/configs/m28evk.h +8 -9

index c3bdd4b..89f9785 100644
@@ -64,8 +64,8 @@
 #if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
-#define CONFIG_ENV_RANGE		(512 * 1024)
-#define CONFIG_ENV_OFFSET		0x300000
+#define CONFIG_ENV_RANGE		(4 * CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_OFFSET		(24 * CONFIG_ENV_SECT_SIZE) /* 3 MiB */
 #define CONFIG_ENV_OFFSET_REDUND	\
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)

@@ -79,13 +79,12 @@
 #define MTDIDS_DEFAULT			"nand0=gpmi-nand"
 #define MTDPARTS_DEFAULT			\
 	"mtdparts=gpmi-nand:"			\
-		"3m(bootloader)ro,"		\
-		"512k(environment),"		\
-		"512k(redundant-environment),"	\
-		"4m(kernel),"			\
-		"128k(fdt),"			\
-		"8m(ramdisk),"			\
-		"-(filesystem)"
+		"3m(u-boot),"			\
+		"512k(env1),"			\
+		"512k(env2),"			\
+		"14m(boot),"			\
+		"238m(data),"			\
+		"- at 4096k(UBI)"
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif

Signature · 1 line

2.0.0.rc2

Marek Vasut

author

2014-06-26 09:01 UTC #5 lore raw

PATCH 3/6 ARM: m28evk: Update default environment

In reply to Marek Vasut

From: Lothar Rubusch <[email protected]>

Signed-off-by Marek Vasut <[email protected]>

Signed-off-by Lothar Rubusch <[email protected]>

---
 include/configs/m28evk.h | 87 ++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 84 insertions(+), 3 deletions(-)

include/configs/m28evk.h +84 -3

index 89f9785..fccd29d 100644
@@ -157,14 +157,28 @@
 
 /* Booting Linux */
 #define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_BOOTFILE		"fitImage"
 #define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
-#define CONFIG_BOOTCOMMAND	"run bootcmd_net"
+#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
 #define CONFIG_LOADADDR		0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /* Extra Environment */
+#define CONFIG_PREBOOT		"run try_bootscript"
+#define CONFIG_HOSTNAME		m28evk
+
 #define CONFIG_EXTRA_ENV_SETTINGS					\
+	"consdev=ttyAMA0\0"						\
+	"baudrate=115200\0"						\
+	"bootdev=/dev/mmcblk0p2\0"					\
+	"rootdev=/dev/mmcblk0p3\0"					\
+	"netdev=eth0\0"							\
+	"hostname=m28evk\0"						\
+	"rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0"		\
+	"kernel_addr_r=0x42000000\0"					\
+	"videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,"	\
+		"le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,"	\
+		"vmode:0\0"						\
 	"update_nand_full_filename=u-boot.nand\0"			\
 	"update_nand_firmware_filename=u-boot.sb\0"			\
 	"update_sd_firmware_filename=u-boot.sd\0"			\

@@ -180,7 +194,7 @@
 		"if tftp ${update_nand_full_filename} ; then "		\
 		"run update_nand_get_fcb_size ; "			\
 		"nand scrub -y 0x0 ${filesize} ; "			\
-		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "	\
+		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "		\
 		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
 		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
 		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \

@@ -202,6 +216,73 @@
 		"setexpr fw_sz ${fw_sz} + 1 ; "				\
 		"mmc write ${loadaddr} 0x800 ${fw_sz} ; "		\
 		"fi ; "							\
+		"fi\0"							\
+	"addcons="							\
+		"setenv bootargs ${bootargs} "				\
+		"console=${consdev},${baudrate}\0"			\
+	"addip="							\
+		"setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+			"${netmask}:${hostname}:${netdev}:off\0"	\
+	"addmisc="							\
+		"setenv bootargs ${bootargs} ${miscargs}\0"		\
+	"adddfltmtd="							\
+		"if test \"x${mtdparts}\" == \"x\" ; then "		\
+			"mtdparts default ; "				\
+		"fi\0"							\
+	"addmtd="							\
+		"run adddfltmtd ; "					\
+		"setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addargs=run addcons addmtd addmisc\0"				\
+	"mmcload="							\
+		"mmc rescan ; "						\
+		"ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"	\
+	"ubiload="							\
+		"ubi part UBI ; ubifsmount ubi0:rootfs ; "		\
+		"ubifsload ${kernel_addr_r} /boot/${bootfile}\0"	\
+	"netload="							\
+		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
+	"miscargs=nohlt panic=1\0"					\
+	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
+	"ubiargs="							\
+		"setenv bootargs ubi.mtd=5 "				\
+		"root=ubi0:rootfs rootfstype=ubifs\0"			\
+	"nfsargs="							\
+		"setenv bootargs root=/dev/nfs rw "			\
+			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
+	"mmc_mmc="							\
+		"run mmcload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"mmc_ubi="							\
+		"run mmcload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"mmc_nfs="							\
+		"run mmcload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_mmc="							\
+		"run ubiload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_ubi="							\
+		"run ubiload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_nfs="							\
+		"run ubiload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_mmc="							\
+		"run netload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_ubi="							\
+		"run netload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nfs="							\
+		"run netload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"try_bootscript="						\
+		"mmc rescan;"						\
+		"if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};"	\
+		"then;"							\
+			"\techo Running bootscript...;"			\
+			"\tsource ${kernel_addr_r};"			\
 		"fi\0"
 
 /* The rest of the configuration is shared */

Signature · 1 line

2.0.0.rc2

Marek Vasut

author

2014-06-26 09:01 UTC #6 lore raw

PATCH 4/6 ARM: m53evk: add needed commands and options

In reply to Marek Vasut

Signed-off-by Marek Vasut <[email protected]>

Signed-off-by Wolfgang Denk <[email protected]>

Cc Stefano Babic <[email protected]>

---
 include/configs/m53evk.h | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

include/configs/m53evk.h +16 -2

index f401470..e8eb521 100644
@@ -18,17 +18,26 @@
 #define CONFIG_REVISION_TAG
 #define CONFIG_SYS_NO_FLASH
 
+#define CONFIG_FIT
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
 /*
  * U-Boot Commands
  */
 #include <config_cmd_default.h>
 #define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_DOS_PARTITION
+#define CONFIG_FAT_WRITE
 
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BMP
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC

@@ -36,6 +45,7 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SATA
+#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_USB
 #define CONFIG_VIDEO

@@ -213,10 +223,14 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASHIMAGE_GUARD
+#define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_IPUV3_CLK	200000000
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
+#define CONFIG_IPUV3_CLK		200000000
 #endif
 
 /*

Signature · 1 line

2.0.0.rc2

Marek Vasut

author

2014-06-26 09:01 UTC #7 lore raw

PATCH 5/6 ARM: m53evk: Adjust mtdparts settings

In reply to Marek Vasut

Adjust the mtdparts settings to allow for alternative boot images and for using UBI.

Signed-off-by Marek Vasut <[email protected]>

Signed-off-by Wolfgang Denk <[email protected]>

Cc Stefano Babic <[email protected]>

---
 include/configs/m53evk.h | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

include/configs/m53evk.h +8 -9

index e8eb521..e0e7aa5 100644
@@ -128,8 +128,8 @@
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
-#define CONFIG_ENV_RANGE		(512 * 1024)
-#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_RANGE		(4 * CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_OFFSET		(8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
 #define CONFIG_ENV_OFFSET_REDUND	\
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)

@@ -143,13 +143,12 @@
 #define MTDIDS_DEFAULT			"nand0=mxc_nand"
 #define MTDPARTS_DEFAULT			\
 	"mtdparts=mxc_nand:"			\
-		"1m(bootloader)ro,"		\
-		"512k(environment),"		\
-		"512k(redundant-environment),"	\
-		"4m(kernel),"			\
-		"128k(fdt),"			\
-		"8m(ramdisk),"			\
-		"-(filesystem)"
+		"1024k(u-boot),"		\
+		"512k(env1),"			\
+		"512k(env2),"			\
+		"14m(boot),"			\
+		"240m(data),"			\
+		"- at 2048k(UBI)"
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif

Signature · 1 line

2.0.0.rc2

Marek Vasut

author

2014-06-26 09:01 UTC #8 lore raw

PATCH 6/6 ARM: m53evk: Update default environment

In reply to Marek Vasut

From: Lothar Rubusch <[email protected]>

Signed-off-by Marek Vasut <[email protected]>

Signed-off-by Lothar Rubusch <[email protected]>

Signed-off-by Wolfgang Denk <[email protected]>

---
 include/configs/m53evk.h | 87 +++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 86 insertions(+), 1 deletion(-)

include/configs/m53evk.h +86 -1

index e0e7aa5..b0edb08 100644
@@ -165,6 +165,7 @@
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
+#define CONFIG_ETHPRIME			"FEC0"
 #endif
 
 /*

@@ -240,9 +241,10 @@
 #define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTFILE		"m53evk/uImage"
+#define CONFIG_BOOTFILE		"fitImage"
 #define CONFIG_BOOTARGS		"console=ttymxc1,115200"
 #define CONFIG_LOADADDR		0x70800000
+#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 #define CONFIG_OF_LIBFDT

@@ -269,4 +271,87 @@
 #define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 
+/*
+ * Extra Environments
+ */
+#define CONFIG_PREBOOT		"run try_bootscript"
+#define CONFIG_HOSTNAME		m53evk
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"consdev=ttymxc1\0"						\
+	"baudrate=115200\0"						\
+	"bootscript=boot.scr\0"						\
+	"bootdev=/dev/mmcblk0p1\0"					\
+	"rootdev=/dev/mmcblk0p2\0"					\
+	"netdev=eth0\0"							\
+	"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"		\
+	"kernel_addr_r=0x72000000\0"					\
+	"addcons="							\
+		"setenv bootargs ${bootargs} "				\
+		"console=${consdev},${baudrate}\0"			\
+	"addip="							\
+		"setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+			"${netmask}:${hostname}:${netdev}:off\0"	\
+	"addmisc="							\
+		"setenv bootargs ${bootargs} ${miscargs}\0"		\
+	"adddfltmtd="							\
+		"if test \"x${mtdparts}\" == \"x\" ; then "		\
+			"mtdparts default ; "				\
+		"fi\0"							\
+	"addmtd="							\
+		"run adddfltmtd ; "					\
+		"setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addargs=run addcons addmtd addmisc\0"				\
+	"mmcload="							\
+		"mmc rescan ; "						\
+		"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"	\
+	"ubiload="							\
+		"ubi part UBI ; ubifsmount ubi0:rootfs ; "		\
+		"ubifsload ${kernel_addr_r} /boot/${bootfile}\0"	\
+	"netload="							\
+		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
+	"miscargs=nohlt panic=1\0"					\
+	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
+	"ubiargs="							\
+		"setenv bootargs ubi.mtd=5 "				\
+		"root=ubi0:rootfs rootfstype=ubifs\0"			\
+	"nfsargs="							\
+		"setenv bootargs root=/dev/nfs rw "			\
+			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
+	"mmc_mmc="							\
+		"run mmcload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"mmc_ubi="							\
+		"run mmcload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"mmc_nfs="							\
+		"run mmcload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_mmc="							\
+		"run ubiload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_ubi="							\
+		"run ubiload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_nfs="							\
+		"run ubiload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_mmc="							\
+		"run netload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_ubi="							\
+		"run netload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nfs="							\
+		"run netload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"try_bootscript="						\
+		"mmc rescan;"						\
+		"if ext4load mmc 0:1 ${kernel_addr_r} ${bootscript};"	\
+		"then;"							\
+			"\techo Running bootscript...;"			\
+			"\tsource ${kernel_addr_r};"			\
+		"fi\0"
+
 #endif	/* __M53EVK_CONFIG_H__ */

Signature · 1 line

2.0.0.rc2