pull request for hisilicon terminal soc
Hi Olof, Hi Kevin, Hi Arnd,
Please help to merge pull request for hisilicon terminal soc.
Best Regards,
Wei
The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/hisilicon/linux-hisi.git tags/hix5hd2-for-3.17-v2
for you to fetch changes up to eeea1ab9b53f311f634e87d9208daa564a97dbba:
ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
----------------------------------------------------------------
ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17
- Rename Hi3716 to HiX5HD2
HiX5HD2 is a SoC with dual Cortex A9 cores for STB market. And original Hi3xxx SoC is for mobile market.
To avoid confusing the two types of SoCs and also because of different implementation(SMP, IPs integarted and earlycon configure), rename Hi3716 to HIX5HD2 ann add ARCH_HIX5HD2.
- Add HiX5HD2 STB SoC and development kit board support
- Change to use power reset driver to reboot for HiX5HD2
- Add ARCH_HISI for the common configure of hisilicon SoCs
- Change to use CPU_METHOD_OF_DECLARE for SMP on HiX5HD2 and hi3xxx
- Enable L2 aux value for Hi3620
----------------------------------------------------------------
Haifeng Yan (3):
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: dts: Add hix5hd2-dkb dts file.
Haojian Zhuang (5):
ARM: hisi: add ARCH_HISI
power: reset: move hisilicon reboot code
ARM: config: enable ARCH_HIX5HD2
ARM: hisi: set l2 aux for pl310
ARM: hisi: remove smp from machine descriptor
Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt | 11 +++++++ arch/arm/Kconfig.debug | 12 ++++++-- arch/arm/Makefile | 2 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/hi3620.dtsi | 1 + arch/arm/boot/dts/hix5hd2-dkb.dts | 53 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/hix5hd2.dtsi | 170 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/configs/hi3xxx_defconfig | 2 ++ arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/mach-hisi/Kconfig | 30 +++++++++++++++++-- arch/arm/mach-hisi/Makefile | 2 +- arch/arm/mach-hisi/core.h | 5 ++++ arch/arm/mach-hisi/headsmp.S | 16 +++++++++++ arch/arm/mach-hisi/hisilicon.c | 45 +++++++---------------------- arch/arm/mach-hisi/hotplug.c | 58 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-hisi/platsmp.c | 53 ++++++++++++++++++++++++++++++++-- drivers/power/reset/Kconfig | 6 ++++ drivers/power/reset/Makefile | 1 + drivers/power/reset/hisi-reboot.c | 67 +++++++++++++++++++++++++++++++++++++++++++ 19 files changed, 492 insertions(+), 44 deletions(-) create mode 100644 arch/arm/boot/dts/hix5hd2-dkb.dts create mode 100644 arch/arm/boot/dts/hix5hd2.dtsi create mode 100644 arch/arm/mach-hisi/headsmp.S create mode 100644 drivers/power/reset/hisi-reboot.c
Quoted 30 lines · On Tuesday 29 July 2014 15:44:10 xuwei wrote:
Hi Olof, Hi Kevin, Hi Arnd,
Please help to merge pull request for hisilicon terminal soc.
Best Regards,
WeiThe following changes since commit
7171511eaec5bf23fb06078f59784a3a0626b38f:Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/hisilicon/linux-hisi.gittags/hix5hd2-for-3.17-v2for you to fetch changes up to
eeea1ab9b53f311f634e87d9208daa564a97dbba:ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
----------------------------------------------------------------
ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17- Rename Hi3716 to HiX5HD2
HiX5HD2 is a SoC with dual Cortex A9 cores for STB market. And original Hi3xxx SoC is for mobile market.
To avoid confusing the two types of SoCs and also because of differentimplementation(SMP, IPs integarted and earlycon configure), rename Hi3716 to HIX5HD2 ann addARCH_HIX5HD2.
Quoted 6 lines
- Add HiX5HD2 STB SoC and development kit board support
- Change to use power reset driver to reboot for HiX5HD2
- AddARCH_HISIfor the common configure of hisilicon SoCs
- Change to useCPU_METHOD_OF_DECLAREfor SMP on HiX5HD2 and hi3xxx
- Enable L2 aux value for Hi3620
Looks all good to me now. I'll wait for Olof to take a second look, since he had comments as well, and will let him pull it.
Thanks for updating it this quickly to address all my comments!
Arnd
Hi,
There were a few things that still needed fixing here -- I took care of most of them. See below.
Quoted 36 lines · xuwei
Hi Olof, Hi Kevin, Hi Arnd,
Please help to merge pull request for hisilicon terminal soc.
Best Regards,
WeiThe following changes since commit
7171511eaec5bf23fb06078f59784a3a0626b38f:Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/hisilicon/linux-hisi.gittags/hix5hd2-for-3.17-v2for you to fetch changes up to
eeea1ab9b53f311f634e87d9208daa564a97dbba:ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
----------------------------------------------------------------
ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17- Rename Hi3716 to HiX5HD2
HiX5HD2 is a SoC with dual Cortex A9 cores for STB market. And original Hi3xxx SoC is for mobile market.
To avoid confusing the two types of SoCs and also because of differentimplementation(SMP, IPs integarted and earlycon configure), rename Hi3716 to HIX5HD2 ann addARCH_HIX5HD2.- Add HiX5HD2 STB SoC and development kit board support
- Change to use power reset driver to reboot for HiX5HD2
- AddARCH_HISIfor the common configure of hisilicon SoCs
- Change to useCPU_METHOD_OF_DECLAREfor SMP on HiX5HD2 and hi3xxx
- Enable L2 aux value for Hi3620
Quoted 5 lines
----------------------------------------------------------------
Haifeng Yan (3):
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: dts: Add hix5hd2-dkb dts file.
It is confusing -- is the SoC named HIX5HD2 or Hisilicon X5HD2? Seems like there are references to both.
What I did was that I renamed the dts and dtsi to hisi-x5hd2 to have the vendor/family as prefix. Given the few boards per SoC family you have had so far, it makes more sense to prefix it with hisi.
Quoted 5 lines
Haojian Zhuang (5):
ARM: hisi: addARCH_HISI
power: reset: move hisilicon reboot code
ARM: config: enableARCH_HIX5HD2
ARM: hisi: set l2 aux for pl310
This patch makes no sense to still carry. If things still need to be resolved, then it should just be dropped.
Quoted 1 line
ARM: hisi: remove smp from machine descriptor
Also, in general: Wei, you seem to have added your Acked-by instead of Signed-off-by on the commits. When you apply them, you need to do so with your sign off.
What I have done is that I have applied most of the above patches directly instead of merging the branch, and I have done the touchups described above (dropped the L2 patch and renamed the dts/dtsi).
If for some reason, the name really should be hisi-hix5hd2, then let me know quickly so I can revisit before it goes in. But I don't thik so -- I find more hits with "x5hd2" out there than with "hix5hd2". If anything, the remaining traces of hix5hd2 should probably be renamed too (machine descriptor, etc).
(I also fixed a few spelling errors in the patch descriptions here and there, etc).
-Olof
Quoted 48 lines · Olof Johansson
Hi,
There were a few things that still needed fixing here -- I took care of most of them. See below.
Quoted 41 lines · xuwei
Hi Olof, Hi Kevin, Hi Arnd,
Please help to merge pull request for hisilicon terminal soc.
Best Regards,
WeiThe following changes since commit
7171511eaec5bf23fb06078f59784a3a0626b38f:Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/hisilicon/linux-hisi.gittags/hix5hd2-for-3.17-v2for you to fetch changes up to
eeea1ab9b53f311f634e87d9208daa564a97dbba:ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
----------------------------------------------------------------
ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17- Rename Hi3716 to HiX5HD2
HiX5HD2 is a SoC with dual Cortex A9 cores for STB market. And original Hi3xxx SoC is for mobile market.
To avoid confusing the two types of SoCs and also because of differentimplementation(SMP, IPs integarted and earlycon configure), rename Hi3716 to HIX5HD2 ann addARCH_HIX5HD2.- Add HiX5HD2 STB SoC and development kit board support
- Change to use power reset driver to reboot for HiX5HD2
- AddARCH_HISIfor the common configure of hisilicon SoCs
- Change to useCPU_METHOD_OF_DECLAREfor SMP on HiX5HD2 and hi3xxx
- Enable L2 aux value for Hi3620----------------------------------------------------------------
Haifeng Yan (3):
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: dts: Add hix5hd2-dkb dts file.
Hi Olof,
Quoted 2 lines
It is confusing -- is the SoC named HIX5HD2 or Hisilicon X5HD2? Seems like there are references to both.
The full name is Hisilicon X5HD2.
But we also call it HIX5HD2.
Quoted 4 lines
What I did was that I renamed the dts and dtsi to hisi-x5hd2 to have the vendor/family as prefix. Given the few boards per SoC family you have had so far, it makes more sense to prefix it with hisi.
It is OK for us.
And we will follow the rule in the future.
Quoted 9 lines
Quoted 5 lines
Haojian Zhuang (5):
ARM: hisi: addARCH_HISI
power: reset: move hisilicon reboot code
ARM: config: enableARCH_HIX5HD2
ARM: hisi: set l2 aux for pl310This patch makes no sense to still carry. If things still need to be resolved, then it should just be dropped.
Quoted 6 lines
Quoted 1 line
ARM: hisi: remove smp from machine descriptor
Also, in general: Wei, you seem to have added your Acked-by instead of Signed-off-by on the commits. When you apply them, you need to do so with your sign off.
Do you mean I need add both "Acked-by" and "Signed-off-by"?or just add "Signed-off-by"?
Quoted 9 lines
What I have done is that I have applied most of the above patches directly instead of merging the branch, and I have done the touchups described above (dropped the L2 patch and renamed the dts/dtsi).
If for some reason, the name really should be hisi-hix5hd2, then let me know quickly so I can revisit before it goes in. But I don't thik so -- I find more hits with "x5hd2" out there than with "hix5hd2". If anything, the remaining traces of hix5hd2 should probably be renamed too (machine descriptor, etc).
It is OK with "x5hd2".
Quoted 2 lines
(I also fixed a few spelling errors in the patch descriptions here and there, etc).
Thanks!
Best Regards,
Wei
Quoted 5 lines
-Olof
.
Quoted 52 lines · xuwei
Quoted 48 lines · Olof Johansson
Hi,
There were a few things that still needed fixing here -- I took care of most of them. See below.
Quoted 41 lines · xuwei
Hi Olof, Hi Kevin, Hi Arnd,
Please help to merge pull request for hisilicon terminal soc.
Best Regards,
WeiThe following changes since commit
7171511eaec5bf23fb06078f59784a3a0626b38f:Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/hisilicon/linux-hisi.gittags/hix5hd2-for-3.17-v2for you to fetch changes up to
eeea1ab9b53f311f634e87d9208daa564a97dbba:ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
----------------------------------------------------------------
ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17- Rename Hi3716 to HiX5HD2
HiX5HD2 is a SoC with dual Cortex A9 cores for STB market. And original Hi3xxx SoC is for mobile market.
To avoid confusing the two types of SoCs and also because of differentimplementation(SMP, IPs integarted and earlycon configure), rename Hi3716 to HIX5HD2 ann addARCH_HIX5HD2.- Add HiX5HD2 STB SoC and development kit board support
- Change to use power reset driver to reboot for HiX5HD2
- AddARCH_HISIfor the common configure of hisilicon SoCs
- Change to useCPU_METHOD_OF_DECLAREfor SMP on HiX5HD2 and hi3xxx
- Enable L2 aux value for Hi3620----------------------------------------------------------------
Haifeng Yan (3):
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: dts: Add hix5hd2-dkb dts file.
Quoted 7 lines
Hi Olof,
Quoted 2 lines
It is confusing -- is the SoC named HIX5HD2 or Hisilicon X5HD2? Seems like there are references to both.
The full name is Hisilicon X5HD2.
But we also call it HIX5HD2.
Ok. I think for consistency, it's better to call it X5HD2 everywhere in the kernel where it's already prefixed by Hisilicon, such as compatible strings and help texts on config options.
Quoted 17 lines
Quoted 4 lines
What I did was that I renamed the dts and dtsi to hisi-x5hd2 to have the vendor/family as prefix. Given the few boards per SoC family you have had so far, it makes more sense to prefix it with hisi.
It is OK for us.
And we will follow the rule in the future.Quoted 9 lines
Quoted 5 lines
Haojian Zhuang (5):
ARM: hisi: addARCH_HISI
power: reset: move hisilicon reboot code
ARM: config: enableARCH_HIX5HD2
ARM: hisi: set l2 aux for pl310This patch makes no sense to still carry. If things still need to be resolved, then it should just be dropped.
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
ARM: hisi: remove smp from machine descriptor
Also, in general: Wei, you seem to have added your Acked-by instead of Signed-off-by on the commits. When you apply them, you need to do so with your sign off.
Do you mean I need add both "Acked-by" and "Signed-off-by"?or just add "Signed-off-by"?
Just S-o-b. See Documentation/SubmittingPatches.txt for more explanation on what the different tags mean.
Quoted 12 lines
Quoted 9 lines
What I have done is that I have applied most of the above patches directly instead of merging the branch, and I have done the touchups described above (dropped the L2 patch and renamed the dts/dtsi).
If for some reason, the name really should be hisi-hix5hd2, then let me know quickly so I can revisit before it goes in. But I don't thik so -- I find more hits with "x5hd2" out there than with "hix5hd2". If anything, the remaining traces of hix5hd2 should probably be renamed too (machine descriptor, etc).
It is OK with "x5hd2".
Quoted 7 lines
Quoted 2 lines
(I also fixed a few spelling errors in the patch descriptions here and there, etc).
Thanks!
Best Regards,
Wei
-Olof
Quoted 58 lines · Olof Johansson
Quoted 57 lines · xuwei
Quoted 48 lines · Olof Johansson
Hi,
There were a few things that still needed fixing here -- I took care of most of them. See below.
Quoted 41 lines · xuwei
Hi Olof, Hi Kevin, Hi Arnd,
Please help to merge pull request for hisilicon terminal soc.
Best Regards,
WeiThe following changes since commit
7171511eaec5bf23fb06078f59784a3a0626b38f:Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/hisilicon/linux-hisi.gittags/hix5hd2-for-3.17-v2for you to fetch changes up to
eeea1ab9b53f311f634e87d9208daa564a97dbba:ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
----------------------------------------------------------------
ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17- Rename Hi3716 to HiX5HD2
HiX5HD2 is a SoC with dual Cortex A9 cores for STB market. And original Hi3xxx SoC is for mobile market.
To avoid confusing the two types of SoCs and also because of differentimplementation(SMP, IPs integarted and earlycon configure), rename Hi3716 to HIX5HD2 ann addARCH_HIX5HD2.- Add HiX5HD2 STB SoC and development kit board support
- Change to use power reset driver to reboot for HiX5HD2
- AddARCH_HISIfor the common configure of hisilicon SoCs
- Change to useCPU_METHOD_OF_DECLAREfor SMP on HiX5HD2 and hi3xxx
- Enable L2 aux value for Hi3620----------------------------------------------------------------
Haifeng Yan (3):
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: dts: Add hix5hd2-dkb dts file.Hi Olof,
Quoted 2 lines
It is confusing -- is the SoC named HIX5HD2 or Hisilicon X5HD2? Seems like there are references to both.
Quoted 6 lines
Quoted 2 lines
The full name is Hisilicon X5HD2.
But we also call it HIX5HD2.Ok. I think for consistency, it's better to call it X5HD2 everywhere in the kernel where it's already prefixed by Hisilicon, such as compatible strings and help texts on config options.
Hrm, I just noticed that the ethernet driver also uses hisilicon,hix5hd2. Based on that, it's probably easier to go back to hisi-hix5hd2 everywhere again. I'll rename the dts/dtsi to hisi-hi* again. Oh well.
-Olof
Quoted 59 lines · Olof Johansson
Quoted 58 lines · Olof Johansson
Quoted 57 lines · xuwei
Quoted 48 lines · Olof Johansson
Hi,
There were a few things that still needed fixing here -- I took care of most of them. See below.
Quoted 41 lines · xuwei
Hi Olof, Hi Kevin, Hi Arnd,
Please help to merge pull request for hisilicon terminal soc.
Best Regards,
WeiThe following changes since commit
7171511eaec5bf23fb06078f59784a3a0626b38f:Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/hisilicon/linux-hisi.gittags/hix5hd2-for-3.17-v2for you to fetch changes up to
eeea1ab9b53f311f634e87d9208daa564a97dbba:ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
----------------------------------------------------------------
ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17- Rename Hi3716 to HiX5HD2
HiX5HD2 is a SoC with dual Cortex A9 cores for STB market. And original Hi3xxx SoC is for mobile market.
To avoid confusing the two types of SoCs and also because of differentimplementation(SMP, IPs integarted and earlycon configure), rename Hi3716 to HIX5HD2 ann addARCH_HIX5HD2.- Add HiX5HD2 STB SoC and development kit board support
- Change to use power reset driver to reboot for HiX5HD2
- AddARCH_HISIfor the common configure of hisilicon SoCs
- Change to useCPU_METHOD_OF_DECLAREfor SMP on HiX5HD2 and hi3xxx
- Enable L2 aux value for Hi3620----------------------------------------------------------------
Haifeng Yan (3):
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: dts: Add hix5hd2-dkb dts file.Hi Olof,
Quoted 2 lines
It is confusing -- is the SoC named HIX5HD2 or Hisilicon X5HD2? Seems like there are references to both.
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
The full name is Hisilicon X5HD2.
But we also call it HIX5HD2.Ok. I think for consistency, it's better to call it X5HD2 everywhere in the kernel where it's already prefixed by Hisilicon, such as compatible strings and help texts on config options.
Hi Olof,
Quoted 4 lines
Hrm, I just noticed that the ethernet driver also uses hisilicon,hix5hd2. Based on that, it's probably easier to go back to hisi-hix5hd2 everywhere again. I'll rename the dts/dtsi to hisi-hi* again. Oh well.
Thanks for your patience and kindness!
Best Regards,
Wei
Quoted 5 lines
-Olof
.
Quoted 58 lines · Olof Johansson
Quoted 57 lines · xuwei
Quoted 48 lines · Olof Johansson
Hi,
There were a few things that still needed fixing here -- I took care of most of them. See below.
Quoted 41 lines · xuwei
Hi Olof, Hi Kevin, Hi Arnd,
Please help to merge pull request for hisilicon terminal soc.
Best Regards,
WeiThe following changes since commit
7171511eaec5bf23fb06078f59784a3a0626b38f:Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/hisilicon/linux-hisi.gittags/hix5hd2-for-3.17-v2for you to fetch changes up to
eeea1ab9b53f311f634e87d9208daa564a97dbba:ARM: hisi: remove smp from machine descriptor (2014-07-29 14:54:11 +0800)
----------------------------------------------------------------
ARM: mach-hisi: Hisilicon teminal soc udaptes for 3.17- Rename Hi3716 to HiX5HD2
HiX5HD2 is a SoC with dual Cortex A9 cores for STB market. And original Hi3xxx SoC is for mobile market.
To avoid confusing the two types of SoCs and also because of differentimplementation(SMP, IPs integarted and earlycon configure), rename Hi3716 to HIX5HD2 ann addARCH_HIX5HD2.- Add HiX5HD2 STB SoC and development kit board support
- Change to use power reset driver to reboot for HiX5HD2
- AddARCH_HISIfor the common configure of hisilicon SoCs
- Change to useCPU_METHOD_OF_DECLAREfor SMP on HiX5HD2 and hi3xxx
- Enable L2 aux value for Hi3620----------------------------------------------------------------
Haifeng Yan (3):
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: dts: Add hix5hd2-dkb dts file.Hi Olof,
Quoted 2 lines
It is confusing -- is the SoC named HIX5HD2 or Hisilicon X5HD2? Seems like there are references to both.
Quoted 32 lines
Quoted 2 lines
The full name is Hisilicon X5HD2.
But we also call it HIX5HD2.Ok. I think for consistency, it's better to call it X5HD2 everywhere in the kernel where it's already prefixed by Hisilicon, such as compatible strings and help texts on config options.
Quoted 25 lines
Quoted 4 lines
What I did was that I renamed the dts and dtsi to hisi-x5hd2 to have the vendor/family as prefix. Given the few boards per SoC family you have had so far, it makes more sense to prefix it with hisi.
It is OK for us.
And we will follow the rule in the future.Quoted 9 lines
Quoted 5 lines
Haojian Zhuang (5):
ARM: hisi: addARCH_HISI
power: reset: move hisilicon reboot code
ARM: config: enableARCH_HIX5HD2
ARM: hisi: set l2 aux for pl310This patch makes no sense to still carry. If things still need to be resolved, then it should just be dropped.
Quoted 6 lines
Quoted 1 line
ARM: hisi: remove smp from machine descriptor
Also, in general: Wei, you seem to have added your Acked-by instead of Signed-off-by on the commits. When you apply them, you need to do so with your sign off.
Do you mean I need add both "Acked-by" and "Signed-off-by"?or just add "Signed-off-by"?
Hi Olof,
Quoted 3 lines
Just S-o-b. See
Documentation/SubmittingPatches.txtfor more explanation on what the different tags mean.
OK.
Thanks!
Best Regards,
Wei
Quoted 25 lines
Quoted 12 lines
Quoted 9 lines
What I have done is that I have applied most of the above patches directly instead of merging the branch, and I have done the touchups described above (dropped the L2 patch and renamed the dts/dtsi).
If for some reason, the name really should be hisi-hix5hd2, then let me know quickly so I can revisit before it goes in. But I don't thik so -- I find more hits with "x5hd2" out there than with "hix5hd2". If anything, the remaining traces of hix5hd2 should probably be renamed too (machine descriptor, etc).
It is OK with "x5hd2".
Quoted 7 lines
Quoted 2 lines
(I also fixed a few spelling errors in the patch descriptions here and there, etc).
Thanks!
Best Regards,
Wei-Olof
.