Skip to contentSkip to conversation

Waiting for removable media ...

DISCUSSION Marc Gilet 2 participants 3 messages Jul 29, 2014 – Jul 30, 2014

lore
Share & tools
lore

Marc Gilet

author
#0 lore raw

Hello,
I'd like to use Yocto with a thinclient (Fujitsu siemens Futro B100)
I've created a BSP for this platform, and configured the kernel for this machine.
I've built an initramfs and a kernel to boot the thinclient via a PXE server, it boots, but the boot process hangs with this massage:" Waiting for removable media ..."

Here's what I did:

$ git clone git://git.yoctoproject.org/poky
$ cd poky/
$ source oe-init-build-env
$ created the BSP with the "yocto-bsp" script
$ bitbake linux-yocto -c menuconfig (the kernel is configured with "CONFIG_DEVTMPFS=y" and "CONFIG_DEVTMPFS_MOUNT=y")
$ bitbake -k core-image-minimal-initramfs

Does anybody knows where it could come from ?
Cheers

#1 lore raw
Quoted 18 lines · Marc Gilet

Hello,
I'd like to use Yocto with a thinclient (Fujitsu siemens Futro B100) I've created a BSP for this platform, and configured the kernel for this machine.
I've built an initramfs and a kernel to boot the thinclient via a PXE server, it boots, but the boot process
hangs with this massage:" Waiting for removable media ..."

Here's what I did:

$ git clone git://git.yoctoproject.org/poky
$ cd poky/
$ source oe-init-build-env
$ created the BSP with the "yocto-bsp" script
$ bitbake linux-yocto -c menuconfig (the kernel is configured with
"CONFIG_DEVTMPFS=y" and "CONFIG_DEVTMPFS_MOUNT=y")
$ bitbake -k core-image-minimal-initramfs
Quoted 1 line

Does anybody knows where it could come from ?

This is in initramfs startup script see, recipes-core/initrdscripts/files/init-live.sh
that script is meant for live boot from media. You have to retool it to fit your boot
environment and method

Quoted 6 lines

Cheers
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

author
#2 lore raw
Quoted 19 lines · Khem Raj
Quoted 18 lines · Marc Gilet

Hello,
I'd like to use Yocto with a thinclient (Fujitsu siemens Futro B100) I've created a BSP for this platform, and configured the kernel for this machine.
I've built an initramfs and a kernel to boot the thinclient via a PXE server, it boots, but the boot process
hangs with this massage:" Waiting for removable media ..."

Here's what I did:

$ git clone git://git.yoctoproject.org/poky
$ cd poky/
$ source oe-init-build-env
$ created the BSP with the "yocto-bsp" script
$ bitbake linux-yocto -c menuconfig (the kernel is configured with
"CONFIG_DEVTMPFS=y" and "CONFIG_DEVTMPFS_MOUNT=y")
$ bitbake -k core-image-minimal-initramfs
Quoted 13 lines
Quoted 1 line

Does anybody knows where it could come from ?

This is in initramfs startup script see, recipes-core/initrdscripts/files/init-live.sh
that script is meant for live boot from media. You have to retool it to fit your boot
environment and method

Quoted 6 lines

Cheers
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

I thought about modifying this file (/recipes-core/initrdscripts/files/init-live.sh/) But how ?
The boot process is waiting for the rootfs on /dev/sdx...
How to change it ?

Here's the content of "init-live.sh":

-------------------------------------------------------------------------------------------------------------------------------------------------------

/#!/bin/sh

PATH=/sbin:/bin:/usr/sbin:/usr/bin

ROOT_MOUNT="/rootfs/"
ROOT_IMAGE="rootfs.img"
MOUNT="/bin/mount"
UMOUNT="/bin/umount"
ISOLINUX=""

ROOT_DISK=""

# Copied from initramfs-framework. The core of this script probably should be

# turned into initramfs-framework modules to reduce duplication.
udev_daemon() {
    OPTIONS="/sbin/udev/udevd /sbin/udevd /lib/udev/udevd 
/lib/systemd/systemd-udevd"

for o in $OPTIONS; do
if [ -x "$o" ]; then
echo $o
return 0
fi
done

return 1
}

_UDEV_DAEMON=udev_daemon

early_setup() {
mkdir -p /proc
mkdir -p /sys
mount -t proc proc /proc
mount -t sysfs sysfs /sys
mount -t devtmpfs none /dev

# support modular kernel
modprobe isofs 2> /dev/null

mkdir -p /run
mkdir -p /var/run

$_UDEV_DAEMON --daemon
udevadm trigger --action=add
}

read_args() {
    [ -z "$CMDLINE" ] && CMDLINE=`cat /proc/cmdline`
    for arg in $CMDLINE; do
        optarg=`expr "x$arg" : 'x[^=]*=\(.*\)'`
        case $arg in
            root=*)
                ROOT_DEVICE=$optarg ;;
            rootimage=*)
                ROOT_IMAGE=$optarg ;;
            rootfstype=*)
                modprobe $optarg 2> /dev/null ;;
            LABEL=*)
                label=$optarg ;;
            video=*)
                video_mode=$arg ;;
            vga=*)
                vga_mode=$arg ;;
            console=*)
                if [ -z "${console_params}" ]; then
                    console_params=$arg
                else
                    console_params="$console_params $arg"
                fi ;;
            debugshell*)
                if [ -z "$optarg" ]; then
                        shelltimeout=30
                else
                        shelltimeout=$optarg
                fi
        esac
    done
}

boot_live_root() {
# Watches the udev event queue, and exits if all current events are
handled

    udevadm settle --timeout=3 --quiet
    killall "${_UDEV_DAEMON##*/}" 2>/dev/null

    # Allow for identification of the real root even after boot
    mkdir -p  ${ROOT_MOUNT}/media/realroot
    mount -n --move "/run/media/${ROOT_DISK}" ${ROOT_MOUNT}/media/realroot

    # Move the mount points of some filesystems over to
    # the corresponding directories under the real root filesystem.
    for dir in `awk '/\/dev.* \/run\/media/{print $2}' /proc/mounts`; do
        mkdir -p  ${ROOT_MOUNT}/media/${dir##*/}
        mount -n --move $dir ${ROOT_MOUNT}/media/${dir##*/}
    done
    mount -n --move /proc ${ROOT_MOUNT}/proc
    mount -n --move /sys ${ROOT_MOUNT}/sys
    mount -n --move /dev ${ROOT_MOUNT}/dev

    cd $ROOT_MOUNT

    # busybox switch_root supports -c option
    exec switch_root -c /dev/console $ROOT_MOUNT /sbin/init $CMDLINE ||
        fatal "Couldn't switch_root, dropping to shell"
}

fatal() {
echo $1 >$CONSOLE
echo >$CONSOLE
exec sh
}

early_setup

[ -z "$CONSOLE" ] && CONSOLE="/dev/console"

read_args

echo "Waiting for removable media..."
C=0
while true
do
for i in ls /run/media 2>/dev/null; do

      if [ -f /run/media/$i/$ROOT_IMAGE ] ; then
        found="yes"
        ROOT_DISK="$i"
        break
      elif [ -f /run/media/$i/isolinux/$ROOT_IMAGE ]; then
        found="yes"
        ISOLINUX="isolinux"
        ROOT_DISK="$i"
        break
      fi
  done
  if [ "$found" = "yes" ]; then
      break;

fi
# don't wait for more than $shelltimeout seconds, if it's set if [ -n "$shelltimeout" ]; then
echo -n " " $(( $shelltimeout - $C ))
if [ $C -ge $shelltimeout ]; then
echo "..."
echo "Mounted filesystems"
mount | grep media
echo "Available block devices"
cat /proc/partitions
fatal "Cannot find $ROOT_IMAGE file in /run/media/* ,
dropping to a shell "

      fi
      C=$(( C + 1 ))

fi
sleep 1
done

# Try to mount the root image read-write and then boot it up.
# This function distinguishes between a read-only image and a read-write image. # In the former case (typically an iso), it tries to make a union mount if possible. # In the latter case, the root image could be mounted and then directly booted up. mount_and_boot() {
mkdir $ROOT_MOUNT
mknod /dev/loop0 b 7 0 2>/dev/null

if ! mount -o rw,loop,noatime,nodiratime
/run/media/$ROOT_DISK/$ISOLINUX/$ROOT_IMAGE $ROOT_MOUNT ; then
fatal "Could not mount rootfs image"
fi

if touch $ROOT_MOUNT/bin 2>/dev/null; then # The root image is read-write, directly boot it up. boot_live_root
fi

# determine which unification filesystem to use union_fs_type=""
if grep -q -w "overlayfs" /proc/filesystems; then union_fs_type="overlayfs"
elif grep -q -w "aufs" /proc/filesystems; then union_fs_type="aufs"
else
union_fs_type=""
fi

# make a union mount if possible
case $union_fs_type in
"overlayfs")
mkdir -p /rootfs.ro /rootfs.rw
if ! mount -n --move $ROOT_MOUNT /rootfs.ro; then
rm -rf /rootfs.ro /rootfs.rw
fatal "Could not move rootfs mount point"
else
mount -t tmpfs -o rw,noatime,mode=755 tmpfs /rootfs.rw mount -t overlayfs -o "lowerdir=/rootfs.ro,upperdir=/rootfs.rw"
overlayfs $ROOT_MOUNT
mkdir -p $ROOT_MOUNT/rootfs.ro $ROOT_MOUNT/rootfs.rw mount --move /rootfs.ro $ROOT_MOUNT/rootfs.ro
mount --move /rootfs.rw $ROOT_MOUNT/rootfs.rw
fi
;;
"aufs")
mkdir -p /rootfs.ro /rootfs.rw
if ! mount -n --move $ROOT_MOUNT /rootfs.ro; then
rm -rf /rootfs.ro /rootfs.rw
fatal "Could not move rootfs mount point"
else
mount -t tmpfs -o rw,noatime,mode=755 tmpfs /rootfs.rw mount -t aufs -o "dirs=/rootfs.rw=rw:/rootfs.ro=ro" aufs
$ROOT_MOUNT

        mkdir -p $ROOT_MOUNT/rootfs.ro $ROOT_MOUNT/rootfs.rw
        mount --move /rootfs.ro $ROOT_MOUNT/rootfs.ro
        mount --move /rootfs.rw $ROOT_MOUNT/rootfs.rw
        fi
        ;;
    "")
        mount -t tmpfs -o rw,noatime,mode=755 tmpfs $ROOT_MOUNT/media
        ;;
    esac

    # boot the image
    boot_live_root
}

case $label in
boot)
mount_and_boot
;;
install|install-efi)
if [ -f /run/media/$i/$ISOLINUX/$ROOT_IMAGE ] ; then
./$label.sh $i/$ISOLINUX $ROOT_IMAGE $video_mode $vga_mode
$console_params
else
fatal "Could not find $label script"
fi

# If we're getting here, we failed...
fatal "Installation image failed"
;;
*)
# Not sure what boot label is provided. Try to boot to avoid
locking up.

    mount_and_boot
    ;;

esac

--------------------------------------------------------------------------------------------------------------------------------------------------------------------
/
/Thank's for help
Cheers