Skip to contentSkip to conversation

i.MX31 PDK: Enable generic board for i.MX31 PDK

PATCH New Magnus Lilja 3 participants 3 messages Aug 5, 2014 – Aug 8, 2014

lore
Share & tools
lore

Magnus Lilja

author
#0 lore raw

PATCH 1/1 i.MX31 PDK: Enable generic board for i.MX31 PDK

Enable CONFIG_SYS_GENERIC_BOARD for the i.MX31 PDK board.

Tested on actual hardware.

Signed-off-by Magnus Lilja <[email protected]>

---

Note: This was tested in a tree where the start.S issue discussed in the "SPL broken on i.mx31 platforms" thread has been fixed.

 include/configs/mx31pdk.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/mx31pdk.h +2 -0
index f796a41..bc4583b 100644
@@ -20,6 +20,8 @@
 #define CONFIG_ARM1136			/* This is an arm1136 CPU core */
 #define CONFIG_MX31			/* in a mx31 */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
Signature · 1 line
1.8.1.4
#2 lore raw

PATCH 1/1 i.MX31 PDK: Enable generic board for i.MX31 PDK

In reply to Magnus Lilja
Quoted 6 lines · Magnus Lilja

Enable CONFIG_SYS_GENERIC_BOARD for the i.MX31 PDK board.

Tested on actual hardware.

Signed-off-by Magnus Lilja <[email protected]>

---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================