Skip to contentSkip to conversation

mx6sxsabresd: Convert to the new Kconfig style

PATCH New Fabio Estevam 2 participants 2 messages Aug 15, 2014 – Aug 20, 2014 Arm (32-bit)

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 mx6sxsabresd: Convert to the new Kconfig style

From: Fabio Estevam <[email protected]>

mx6sxsabresd was not in the master branch when the conversion to the new Kconfig style happened, so convert it now so that it can build again.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/Kconfig                         |  4 ++++
 board/freescale/mx6sxsabresd/Kconfig     | 23 +++++++++++++++++++++++
 board/freescale/mx6sxsabresd/MAINTAINERS |  6 ++++++
 configs/mx6sxsabresd_defconfig           |  3 +++
 4 files changed, 36 insertions(+)
 create mode 100644 board/freescale/mx6sxsabresd/Kconfig
 create mode 100644 board/freescale/mx6sxsabresd/MAINTAINERS
 create mode 100644 configs/mx6sxsabresd_defconfig
arch/arm/Kconfig +4 -0
index e385eda..c041e8a 100644
@@ -524,6 +524,9 @@ config TARGET_MX6SABRESD
 config TARGET_MX6SLEVK
 	bool "Support mx6slevk"
 
+config TARGET_MX6SXSABRESD
+	bool "Support mx6sxsabresd"
+
 config TARGET_GW_VENTANA
 	bool "Support gw_ventana"
 

@@ -880,6 +883,7 @@ source "board/freescale/mx6qarm2/Kconfig"
 source "board/freescale/mx6qsabreauto/Kconfig"
 source "board/freescale/mx6sabresd/Kconfig"
 source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sxsabresd/Kconfig"
 source "board/freescale/vf610twr/Kconfig"
 source "board/gateworks/gw_ventana/Kconfig"
 source "board/genesi/mx51_efikamx/Kconfig"
board/freescale/mx6sxsabresd/Kconfig new file +23 -0
new file mode 100644
index 0000000..ee8f4a6
@@ -0,0 +1,23 @@
+if TARGET_MX6SXSABRESD
+
+config SYS_CPU
+	string
+	default "armv7"
+
+config SYS_BOARD
+	string
+	default "mx6sxsabresd"
+
+config SYS_VENDOR
+	string
+	default "freescale"
+
+config SYS_SOC
+	string
+	default "mx6"
+
+config SYS_CONFIG_NAME
+	string
+	default "mx6sxsabresd"
+
+endif
board/freescale/mx6sxsabresd/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000..f52f300
@@ -0,0 +1,6 @@
+MX6SXSABRESD BOARD
+M:	Fabio Estevam <[email protected]>
+S:	Maintained
+F:	board/freescale/mx6sxsabresd/
+F:	include/configs/mx6sxsabresd.h
+F:	configs/mx6sxsabresd_defconfig
configs/mx6sxsabresd_defconfig new file +3 -0
new file mode 100644
index 0000000..f23d48f
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6SXSABRESD=y
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 mx6sxsabresd: Convert to the new Kconfig style

Hi Fabio,

Quoted 86 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

mx6sxsabresd was not in the master branch when the conversion to the new Kconfig style happened, so convert it now so that it can build again.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/Kconfig                         |  4 ++++
 board/freescale/mx6sxsabresd/Kconfig     | 23 +++++++++++++++++++++++
 board/freescale/mx6sxsabresd/MAINTAINERS |  6 ++++++
 configs/mx6sxsabresd_defconfig           |  3 +++
 4 files changed, 36 insertions(+)
 create mode 100644 board/freescale/mx6sxsabresd/Kconfig
 create mode 100644 board/freescale/mx6sxsabresd/MAINTAINERS
 create mode 100644 configs/mx6sxsabresd_defconfig
arch/arm/Kconfig +4 -0
index e385eda..c041e8a 100644
@@ -524,6 +524,9 @@ config TARGET_MX6SABRESD
 config TARGET_MX6SLEVK
 	bool "Support mx6slevk"
 
+config TARGET_MX6SXSABRESD
+	bool "Support mx6sxsabresd"
+
 config TARGET_GW_VENTANA
 	bool "Support gw_ventana"
 

@@ -880,6 +883,7 @@ source "board/freescale/mx6qarm2/Kconfig"
 source "board/freescale/mx6qsabreauto/Kconfig"
 source "board/freescale/mx6sabresd/Kconfig"
 source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sxsabresd/Kconfig"
 source "board/freescale/vf610twr/Kconfig"
 source "board/gateworks/gw_ventana/Kconfig"
 source "board/genesi/mx51_efikamx/Kconfig"
board/freescale/mx6sxsabresd/Kconfig new file +23 -0
new file mode 100644
index 0000000..ee8f4a6
@@ -0,0 +1,23 @@
+if TARGET_MX6SXSABRESD
+
+config SYS_CPU
+	string
+	default "armv7"
+
+config SYS_BOARD
+	string
+	default "mx6sxsabresd"
+
+config SYS_VENDOR
+	string
+	default "freescale"
+
+config SYS_SOC
+	string
+	default "mx6"
+
+config SYS_CONFIG_NAME
+	string
+	default "mx6sxsabresd"
+
+endif
board/freescale/mx6sxsabresd/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000..f52f300
@@ -0,0 +1,6 @@
+MX6SXSABRESD BOARD
+M:	Fabio Estevam <[email protected]>
+S:	Maintained
+F:	board/freescale/mx6sxsabresd/
+F:	include/configs/mx6sxsabresd.h
+F:	configs/mx6sxsabresd_defconfig
configs/mx6sxsabresd_defconfig new file +0 -0
new file mode 100644
index 0000000..f23d48f

configs/mx6sxsabresd_defconfig line 3

Quoted 3 lines
configs/mx6sxsabresd_defconfig new file +3 -0
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6SXSABRESD=y

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================