staging: comedi: hwdrv_apci1500: coding style cleanups
cover staging: comedi: hwdrv_apci1500: coding style cleanups
This patchset begins by removing unneeded braces and commented out lines of code, and then tidies whitespace issues that are revealed after the braces/dead code is removed.
Chase Southwood (4):
staging: comedi: hwdrv_apci1500: remove unneeded braces
staging: comedi: hwdrv_apci1500: remove commented out code
staging: comedi: hwdrv_apci1500: clean some whitespace style issues
staging: comedi: hwdrv_apci1500: miscellaneous cleanup
.../comedi/drivers/addi-data/hwdrv_apci1500.c | 349 +++++++++------------ 1 file changed, 149 insertions(+), 200 deletions(-)
Signature · 1 line
2.1.0
PATCH 1/4 staging: comedi: hwdrv_apci1500: remove unneeded braces
We don't need braces around single-statement blocks.
--- .../comedi/drivers/addi-data/hwdrv_apci1500.c | 30 +++++++++------------- 1 file changed, 12 insertions(+), 18 deletions(-)
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c +12 -18
@@ -835,10 +835,9 @@ static int apci1500_do_write(struct comedi_device *dev,unsigned int ui_Temp1;unsigned int ui_NoOfChannel =CR_CHAN (insn->chanspec);/* get the channel */ -if (!devpriv->b_OutputMemoryStatus) { +if (!devpriv->b_OutputMemoryStatus) ui_Temp =0 ; - }/* if(!devpriv->b_OutputMemoryStatus ) */ if (data[3 ] ==0 ) {if (data[1 ] ==0 ) { data[0 ] = (data[0 ] << ui_NoOfChannel) | ui_Temp;
@@ -1502,12 +1501,11 @@ static int apci1500_timer_write(struct comedi_device *dev,switch (data[1 ]) {case START :if (i_TimerCounter1Init ==1 ) { -if (i_TimerCounterWatchdogInterrupt ==1 ) { +if (i_TimerCounterWatchdogInterrupt ==1 ) i_CommandAndStatusValue =0xC4 ;/* Enable the interrupt */ - }/* if(i_TimerCounterWatchdogInterrupt==1) */ -else { +else i_CommandAndStatusValue =0xE4 ;/* disable the interrupt */ - }/* elseif(i_TimerCounterWatchdogInterrupt==1) */ +/* Starts timer/counter 1 */ i_TimerCounter1Enabled =1 ;/* Selects the commands and status register */
@@ -1578,12 +1576,11 @@ static int apci1500_timer_write(struct comedi_device *dev,switch (data[1 ]) {case START :if (i_TimerCounter2Init ==1 ) { -if (i_TimerCounterWatchdogInterrupt ==1 ) { +if (i_TimerCounterWatchdogInterrupt ==1 ) i_CommandAndStatusValue =0xC4 ;/* Enable the interrupt */ - }/* if(i_TimerCounterWatchdogInterrupt==1) */ -else { +else i_CommandAndStatusValue =0xE4 ;/* disable the interrupt */ - }/* elseif(i_TimerCounterWatchdogInterrupt==1) */ +/* Starts timer/counter 2 */ i_TimerCounter2Enabled =1 ;/* Selects the commands and status register */
@@ -1652,12 +1649,11 @@ static int apci1500_timer_write(struct comedi_device *dev,case START :if (i_WatchdogCounter3Init ==1 ) { -if (i_TimerCounterWatchdogInterrupt ==1 ) { +if (i_TimerCounterWatchdogInterrupt ==1 ) i_CommandAndStatusValue =0xC4 ;/* Enable the interrupt */ - }/* if(i_TimerCounterWatchdogInterrupt==1) */ -else { +else i_CommandAndStatusValue =0xE4 ;/* disable the interrupt */ - }/* elseif(i_TimerCounterWatchdogInterrupt==1) */ +/* Starts Watchdog/counter 3 */ i_WatchdogCounter3Enabled =1 ;/* Selects the commands and status register */
@@ -2208,12 +2204,10 @@ static void apci1500_interrupt(int irq, void *d)outb (i_RegValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); -if (i_CounterLogic ==APCI1500_COUNTER ) { +if (i_CounterLogic ==APCI1500_COUNTER ) i_InterruptMask = i_InterruptMask |0x10 ; - }/* if(i_CounterLogic==APCI1500_COUNTER) */ -else { +else i_InterruptMask = i_InterruptMask |0x20 ; - } }/* if ((i_RegValue & 0x60) == 0x60) */ send_sig (SIGIO , devpriv->tsk_Current,0 );/* send signal to the sample */
Signature · 1 line
2.1.0
PATCH 2/4 staging: comedi: hwdrv_apci1500: remove commented out code
In reply to Chase Southwood--- .../comedi/drivers/addi-data/hwdrv_apci1500.c | 249 ++++++++++----------- 1 file changed, 123 insertions(+), 126 deletions(-)
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c +123 -126
@@ -172,17 +172,17 @@ static int apci1500_di_config(struct comedi_device *dev,if (data[0 ] ==1 ) { i_MaxChannel =8 ; - }/* if (data[0] == 1) */ + }else {if (data[0 ] ==2 ) { i_MaxChannel =6 ; - }/* if(data[0]==2) */ + }else {dev_warn (dev->hw_dev,"The specified port event does not exist\n" );return -EINVAL ; - }/* else if(data[0]==2) */ - }/* else if (data[0] == 1) */ + } + }switch (data[1 ]) {case 0 : data[1 ] =APCI1500_AND ;
@@ -197,7 +197,7 @@ static int apci1500_di_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"The specified interrupt logic does not exist\n" );return -EINVAL ; - }/* switch(data[1]); */ + } i_Logic = data[1 ];for (i_Count = i_MaxChannel, i =0 ; i_Count >0 ; i_Count--, i++) {
@@ -242,8 +242,8 @@ static int apci1500_di_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"The option indicated in the event mask does not exist\n" );return -EINVAL ; - }/* switch(i_EventMask) */ - }/* for (i_Count = i_MaxChannel; i_Count >0;i_Count --) */ + } + }if (data[0 ] ==1 ) {/* Test the interrupt logic */
@@ -259,7 +259,7 @@ static int apci1500_di_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"Transition error on an OR PRIORITY logic\n" );return -EINVAL ; - }/* if (data[1]== APCI1500_OR_PRIORITY && i_PatternTransition != 0) */ + }/* Tests if more than one transition */ /* was declared for an AND logic */
@@ -271,14 +271,14 @@ static int apci1500_di_config(struct comedi_device *dev, ((i_PatternTransition >> i_Count) &0x1 ); - }/* for (i_Count = 0; i_Count < 8; i_Count++) */ + }if (i_PatternTransitionCount >1 ) {dev_warn (dev->hw_dev,"Transition error on an AND logic\n" );return -EINVAL ; - }/* if (i_PatternTransitionCount > 1) */ - }/* if (data[1]== APCI1500_AND) */ + } + }/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
@@ -347,13 +347,13 @@ static int apci1500_di_config(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); - }/* if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */ + }else {dev_warn (dev->hw_dev,"The choice for interrupt logic does not exist\n" );return -EINVAL ; - }/* else }// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */ - }/* if (data[0]== 1) */ + } + }/* Test if event setting for port 2 */
@@ -448,13 +448,13 @@ static int apci1500_di_config(struct comedi_device *dev,outb (0xF4 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if (data[1] == APCI1500_OR) */ + }else {dev_warn (dev->hw_dev,"The choice for interrupt logic does not exist\n" );return -EINVAL ; - }/* elseif (data[1] == APCI1500_OR) */ - }/* if(data[0]==2) */ + } + }return insn->n; }
@@ -518,13 +518,13 @@ static int apci1500_di_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); - }/* if(i_Event1Status==1) */ + }else {dev_warn (dev->hw_dev,"Event 1 not initialised\n" );return -EINVAL ; - }/* else if(i_Event1Status==1) */ - }/* if (data[1]==1) */ + } + }if (data[1 ] ==2 ) {if (i_Event2Status ==1 ) {
@@ -555,19 +555,19 @@ static int apci1500_di_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); i_Event2InterruptStatus =1 ; - }/* if(i_Event2Status==1) */ + }else {dev_warn (dev->hw_dev,"Event 2 not initialised\n" );return -EINVAL ; - }/* else if(i_Event2Status==1) */ - }/* if(data[1]==2) */ - }/* if (data[1] == 1 || data[0] == 2) */ + } + } + }else {dev_warn (dev->hw_dev,"The port parameter is in error\n" );return -EINVAL ; - }/* else if (data[1] == 1 || data[0] == 2) */ + }break ;
@@ -600,13 +600,13 @@ static int apci1500_di_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); i_Event1InterruptStatus =0 ; - }/* if(i_Event1Status==1) */ + }else {dev_warn (dev->hw_dev,"Event 1 not initialised\n" );return -EINVAL ; - }/* else if(i_Event1Status==1) */ - }/* if (data[1]==1) */ + } + }if (data[1 ] ==2 ) {/* Test if event initialised */ if (i_Event2Status ==1 ) {
@@ -630,26 +630,26 @@ static int apci1500_di_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); i_Event2InterruptStatus =0 ; - }/* if(i_Event2Status==1) */ + }else {dev_warn (dev->hw_dev,"Event 2 not initialised\n" );return -EINVAL ; - }/* else if(i_Event2Status==1) */ - }/* if(data[1]==2) */ + } + } - }/* if (data[1] == 1 || data[1] == 2) */ + }else {dev_warn (dev->hw_dev,"The port parameter is in error\n" );return -EINVAL ; - }/* else if (data[1] == 1 || data[1] == 2) */ + }break ;default :dev_warn (dev->hw_dev,"The option of START/STOP logic does not exist\n" );return -EINVAL ; - }/* switch(data[0]) */ + }return insn->n; }
@@ -843,7 +843,7 @@ static int apci1500_do_write(struct comedi_device *dev, data[0 ] = (data[0 ] << ui_NoOfChannel) | ui_Temp;outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); - }/* if(data[1]==0) */ + }else {if (data[1 ] ==1 ) {switch (ui_NoOfChannel) {
@@ -875,19 +875,19 @@ static int apci1500_do_write(struct comedi_device *dev, "chan spec wrong\n");return -EINVAL ;/* "sorry channel spec wrong " */ - }/* switch(ui_NoOfChannels) */ + }outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); - }/* if(data[1]==1) */ + }else {dev_warn (dev->hw_dev,"Specified channel not supported\n" );return -EINVAL ; - }/* else if(data[1]==1) */ - }/* elseif(data[1]==0) */ - }/* if(data[3]==0) */ + } + } + }else {if (data[3 ] ==1 ) {if (data[1 ] ==0 ) {
@@ -902,7 +902,7 @@ static int apci1500_do_write(struct comedi_device *dev,outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); - }/* if(data[1]==0) */ + }else {if (data[1 ] ==1 ) {switch (ui_NoOfChannel) {
@@ -954,25 +954,25 @@ static int apci1500_do_write(struct comedi_device *dev, "chan spec wrong\n");return -EINVAL ;/* "sorry channel spec wrong " */ - }/* switch(ui_NoOfChannels) */ + }outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); - }/* if(data[1]==1) */ + }else {dev_warn (dev->hw_dev,"Specified channel not supported\n" );return -EINVAL ; - }/* else if(data[1]==1) */ - }/* elseif(data[1]==0) */ - }/* if(data[3]==1); */ + } + } + }else {dev_warn (dev->hw_dev,"Specified functionality does not exist\n" );return -EINVAL ; - }/* if else data[3]==1) */ - }/* if else data[3]==0) */ + } + } ui_Temp = data[0 ];return insn->n; }
@@ -1004,14 +1004,14 @@ static int apci1500_timer_config(struct comedi_device *dev,/* Selection of the input clock */ if (data[0 ] ==0 || data[0 ] ==1 || data[0 ] ==2 ) {outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_CLK_SELECT ); - }/* if(data[0]==0||data[0]==1||data[0]==2) */ + }else {if (data[0 ] !=3 ) {dev_warn (dev->hw_dev,"The option for input clock selection does not exist\n" );return -EINVAL ; - }/* if(data[0]!=3) */ - }/* elseif(data[0]==0||data[0]==1||data[0]==2) */ + } + }/* Select the counter/timer */ switch (data[1 ]) {case COUNTER1 :
@@ -1027,7 +1027,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This choice is not a timer nor a counter\n" );return -EINVAL ; - }/* switch(data[2]) */ + }/* Selecting single or continuous mode */ switch (data[4 ]) {
@@ -1041,7 +1041,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This option for single/continuous mode does not exist\n" );return -EINVAL ; - }/* switch(data[4]) */ + } i_TimerCounterMode = data[2 ] | data[4 ] |7 ;/* Test the reload value */
@@ -1132,18 +1132,18 @@ static int apci1500_timer_config(struct comedi_device *dev,outb (0x2 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */ + }else {dev_warn (dev->hw_dev,"Error in selection of interrupt enable or disable\n" );return -EINVAL ; - }/* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */ - }/* if ((data[3]>= 0) && (data[3] <= 65535)) */ + } + }else {dev_warn (dev->hw_dev,"Error in selection of reload value\n" );return -EINVAL ; - }/* else if ((data[3]>= 0) && (data[3] <= 65535)) */ + } i_TimerCounterWatchdogInterrupt = data[7 ]; i_TimerCounter1Init =1 ;break ;
@@ -1160,7 +1160,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This choice is not a timer nor a counter\n" );return -EINVAL ; - }/* switch(data[2]) */ + }/* Selecting single or continuous mode */ switch (data[4 ]) {
@@ -1174,7 +1174,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This option for single/continuous mode does not exist\n" );return -EINVAL ; - }/* switch(data[4]) */ + }/* Selecting software or hardware trigger */ switch (data[5 ]) {
@@ -1188,7 +1188,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This choice for software or hardware trigger does not exist\n" );return -EINVAL ; - }/* switch(data[5]) */ + }/* Selecting software or hardware gate */ switch (data[6 ]) {
@@ -1202,7 +1202,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This choice for software or hardware gate does not exist\n" );return -EINVAL ; - }/* switch(data[6]) */ + } i_TimerCounterMode = data[2 ] | data[4 ] | data[5 ] | data[6 ] |7 ;
@@ -1294,18 +1294,18 @@ static int apci1500_timer_config(struct comedi_device *dev,outb (0x2 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */ + }else {dev_warn (dev->hw_dev,"Error in selection of interrupt enable or disable\n" );return -EINVAL ; - }/* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */ - }/* if ((data[3]>= 0) && (data[3] <= 65535)) */ + } + }else {dev_warn (dev->hw_dev,"Error in selection of reload value\n" );return -EINVAL ; - }/* else if ((data[3]>= 0) && (data[3] <= 65535)) */ + } i_TimerCounterWatchdogInterrupt = data[7 ]; i_TimerCounter2Init =1 ;break ;
@@ -1322,7 +1322,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This choice is not a watchdog nor a counter\n" );return -EINVAL ; - }/* switch(data[2]) */ + }/* Selecting single or continuous mode */ switch (data[4 ]) {
@@ -1336,7 +1336,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This option for single/continuous mode does not exist\n" );return -EINVAL ; - }/* switch(data[4]) */ + }/* Selecting software or hardware gate */ switch (data[6 ]) {
@@ -1350,7 +1350,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"This choice for software or hardware gate does not exist\n" );return -EINVAL ; - }/* switch(data[6]) */ + }/* Test if used for watchdog */
@@ -1359,10 +1359,10 @@ static int apci1500_timer_config(struct comedi_device *dev,/* - Enables retrigger */ /* - Pulses output */ i_TimerCounterMode = data[2 ] | data[4 ] |0x54 ; - }/* if (data[2] == APCI1500_WATCHDOG) */ + }else { i_TimerCounterMode = data[2 ] | data[4 ] | data[6 ] |7 ; - }/* elseif (data[2] == APCI1500_WATCHDOG) */ + }/* Test the reload value */ if ((data[3 ] >=0 ) && (data[3 ] <=65535 )) {
@@ -1454,20 +1454,20 @@ static int apci1500_timer_config(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); - }/* elseif(data[2]==APCI1500_COUNTER) */ + } - }/* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */ + }else {dev_warn (dev->hw_dev,"Error in selection of interrupt enable or disable\n" );return -EINVAL ; - }/* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */ - }/* if ((data[3]>= 0) && (data[3] <= 65535)) */ + } + }else {dev_warn (dev->hw_dev,"Error in selection of reload value\n" );return -EINVAL ; - }/* else if ((data[3]>= 0) && (data[3] <= 65535)) */ + } i_TimerCounterWatchdogInterrupt = data[7 ]; i_WatchdogCounter3Init =1 ;break ;
@@ -1476,7 +1476,7 @@ static int apci1500_timer_config(struct comedi_device *dev,dev_warn (dev->hw_dev,"The specified counter/timer option does not exist\n" );return -EINVAL ; - }/* switch(data[1]) */ + } i_CounterLogic = data[2 ];return insn->n; }
@@ -1515,7 +1515,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_TimerCounter1Init==1) */ + }else {dev_warn (dev->hw_dev,"Counter/Timer1 not configured\n" );
@@ -1543,12 +1543,12 @@ static int apci1500_timer_write(struct comedi_device *dev,/* Set Trigger and gate */ i_CommandAndStatusValue =0x6 ; - }/* if( i_TimerCounter1Enabled==1) */ + }else {/* Set Trigger */ i_CommandAndStatusValue =0x2 ; - }/* elseif(i_TimerCounter1Enabled==1) */ + }/* Selects the commands and status register */ outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
@@ -1557,7 +1557,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_TimerCounter1Init==1) */ + }else {dev_warn (dev->hw_dev,"Counter/Timer1 not configured\n" );
@@ -1569,7 +1569,7 @@ static int apci1500_timer_write(struct comedi_device *dev,dev_warn (dev->hw_dev,"The specified option for start/stop/trigger does not exist\n" );return -EINVAL ; - }/* switch(data[1]) */ + }break ;case COUNTER2 :
@@ -1590,7 +1590,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_TimerCounter2Init==1) */ + }else {dev_warn (dev->hw_dev,"Counter/Timer2 not configured\n" );
@@ -1617,12 +1617,12 @@ static int apci1500_timer_write(struct comedi_device *dev,/* Set Trigger and gate */ i_CommandAndStatusValue =0x6 ; - }/* if( i_TimerCounter2Enabled==1) */ + }else {/* Set Trigger */ i_CommandAndStatusValue =0x2 ; - }/* elseif(i_TimerCounter2Enabled==1) */ + }/* Selects the commands and status register */ outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
@@ -1631,7 +1631,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_TimerCounter2Init==1) */ + }else {dev_warn (dev->hw_dev,"Counter/Timer2 not configured\n" );
@@ -1642,7 +1642,7 @@ static int apci1500_timer_write(struct comedi_device *dev,dev_warn (dev->hw_dev,"The specified option for start/stop/trigger does not exist\n" );return -EINVAL ; - }/* switch(data[1]) */ + }break ;case COUNTER3 :switch (data[1 ]) {
@@ -1664,7 +1664,7 @@ static int apci1500_timer_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); - }/* if( i_WatchdogCounter3init==1) */ + }else {dev_warn (dev->hw_dev,"Watchdog/Counter3 not configured\n" );
@@ -1694,12 +1694,12 @@ static int apci1500_timer_write(struct comedi_device *dev,/* Set Trigger and gate */ i_CommandAndStatusValue =0x6 ; - }/* if( i_WatchdogCounter3Enabled==1) */ + }else {/* Set Trigger */ i_CommandAndStatusValue =0x2 ; - }/* elseif(i_WatchdogCounter3Enabled==1) */ + }/* Selects the commands and status register */ outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
@@ -1708,7 +1708,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_WatchdogCounter3Init==1) */ + }else {dev_warn (dev->hw_dev,"Counter3 not configured\n" );
@@ -1726,7 +1726,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (0x6 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_WatchdogCounter3Init==1) */ + }else {dev_warn (dev->hw_dev,"Watchdog 3 not configured\n" );
@@ -1737,19 +1737,19 @@ static int apci1500_timer_write(struct comedi_device *dev,dev_warn (dev->hw_dev,"Wrong choice of watchdog/counter3\n" );return -EINVAL ; - }/* switch(data[2]) */ + }break ;default :dev_warn (dev->hw_dev,"The specified option for start/stop/trigger does not exist\n" );return -EINVAL ; - }/* switch(data[1]) */ + }break ;default :dev_warn (dev->hw_dev,"The specified choice for counter/watchdog/timer does not exist\n" );return -EINVAL ; - }/* switch(data[0]) */ + }return insn->n; }
@@ -1774,12 +1774,12 @@ static int apci1500_timer_bits(struct comedi_device *dev,/* Set RCC and gate */ i_CommandAndStatusValue =0xC ; - }/* if( i_TimerCounter1Init==1) */ + }else {/* Set RCC */ i_CommandAndStatusValue =0x8 ; - }/* elseif(i_TimerCounter1Init==1) */ + }/* Selects the commands and status register */ outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
@@ -1804,12 +1804,12 @@ static int apci1500_timer_bits(struct comedi_device *dev, data[0 ] = data[0 ] |inb (devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_TimerCounter1Init==1) */ + }else {dev_warn (dev->hw_dev,"Timer/Counter1 not configured\n" );return -EINVAL ; - }/* elseif( i_TimerCounter1Init==1) */ + }break ;case COUNTER2 :/* Read counter/timer2 */
@@ -1818,12 +1818,12 @@ static int apci1500_timer_bits(struct comedi_device *dev,/* Set RCC and gate */ i_CommandAndStatusValue =0xC ; - }/* if( i_TimerCounter2Init==1) */ + }else {/* Set RCC */ i_CommandAndStatusValue =0x8 ; - }/* elseif(i_TimerCounter2Init==1) */ + }/* Selects the commands and status register */ outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
@@ -1853,7 +1853,7 @@ static int apci1500_timer_bits(struct comedi_device *dev,dev_warn (dev->hw_dev,"Timer/Counter2 not configured\n" );return -EINVAL ; - }/* elseif( i_TimerCounter2Init==1) */ + }break ;case COUNTER3 :/* Read counter/watchdog2 */
@@ -1862,12 +1862,12 @@ static int apci1500_timer_bits(struct comedi_device *dev,/* Set RCC and gate */ i_CommandAndStatusValue =0xC ; - }/* if( i_TimerCounter2Init==1) */ + }else {/* Set RCC */ i_CommandAndStatusValue =0x8 ; - }/* elseif(i_WatchdogCounter3Init==1) */ + }/* Selects the commands and status register */ outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
@@ -1892,18 +1892,18 @@ static int apci1500_timer_bits(struct comedi_device *dev, data[0 ] = data[0 ] |inb (devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_WatchdogCounter3Init==1) */ + }else {dev_warn (dev->hw_dev,"WatchdogCounter3 not configured\n" );return -EINVAL ; - }/* elseif( i_WatchdogCounter3Init==1) */ + }break ;default :dev_warn (dev->hw_dev,"The choice of timer/counter/watchdog does not exist\n" );return -EINVAL ; - }/* switch(data[0]) */ + }return insn->n; }
@@ -1942,17 +1942,17 @@ static int apci1500_do_bits(struct comedi_device *dev,outl (0x0 , devpriv->i_IobaseAmcc +0x38 );if (data[0 ] ==1 ) { i_Constant =0xC0 ; - }/* if(data[0]==1) */ + }else {if (data[0 ] ==0 ) { i_Constant =0x00 ; - }/* if{data[0]==0) */ + }else {dev_warn (dev->hw_dev,"The parameter passed to driver is in error for enabling the voltage interrupt\n" );return -EINVAL ; - }/* else if(data[0]==0) */ - }/* elseif(data[0]==1) */ + } + }/* Selects the mode specification register of port B */ outb(APCI1500_RW_PORT_B_SPECIFICATION,
@@ -2067,10 +2067,7 @@ static void apci1500_interrupt(int irq, void *d)if ((ui_InterruptStatus &0x800000 ) ==0x800000 ) {/* Disable all Interrupt */ /* Selects the master interrupt control register */ -/* outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */ /* Disables the main interrupt on the board */ -/* outb(0x00,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */ -/* Selects the command and status register of port A */ outb (APCI1500_RW_PORT_A_COMMAND_AND_STATUS , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER );
@@ -2105,11 +2102,11 @@ static void apci1500_interrupt(int irq, void *d) i_InputChannel =1 + (i_RegValue >>1 ); - }/* if(i_Logic==APCI1500_OR_PRIORITY) */ + }else { i_InputChannel =0 ; - }/* elseif(i_Logic==APCI1500_OR_PRIORITY) */ - }/* if ((i_RegValue & 0x60) == 0x60) */ + } + }/* Selects the command and status register of port B */ outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
@@ -2142,17 +2139,17 @@ static void apci1500_interrupt(int irq, void *d)if (i_RegValue &0x80 ) { i_InterruptMask = i_InterruptMask |0x40 ; - }/* if (i_RegValue & 0x80) */ + }if (i_RegValue &0x40 ) { i_InterruptMask = i_InterruptMask |0x80 ; - }/* if (i_RegValue & 0x40) */ - }/* if (i_RegValue) */ + } + }else { i_InterruptMask = i_InterruptMask |2 ; - }/* if (i_RegValue) */ - }/* if ((i_RegValue & 0x60) == 0x60) */ + } + }/* Selects the command and status register of timer 1 */ outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
@@ -2170,7 +2167,7 @@ static void apci1500_interrupt(int irq, void *d) devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); i_InterruptMask = i_InterruptMask |4 ; - }/* if ((i_RegValue & 0x60) == 0x60) */ + }/* Selects the command and status register of timer 2 */ outb (APCI1500_RW_CPT_TMR2_CMD_STATUS , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER );
@@ -2187,7 +2184,7 @@ static void apci1500_interrupt(int irq, void *d) devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); i_InterruptMask = i_InterruptMask |8 ; - }/* if ((i_RegValue & 0x60) == 0x60) */ + }/* Selects the command and status register of timer 3 */ outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
@@ -2208,7 +2205,7 @@ static void apci1500_interrupt(int irq, void *d) i_InterruptMask = i_InterruptMask |0x10 ; else i_InterruptMask = i_InterruptMask |0x20 ; - }/* if ((i_RegValue & 0x60) == 0x60) */ + }send_sig (SIGIO , devpriv->tsk_Current,0 );/* send signal to the sample */ /* Enable all Interrupts */
@@ -2218,12 +2215,12 @@ static void apci1500_interrupt(int irq, void *d) devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);/* Authorizes the main interrupt on the board */ outb (0xD0 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if ((ui_InterruptStatus & 0x800000) == 0x800000) */ + }else {dev_warn (dev->hw_dev,"Interrupt from unknown source\n" ); - }/* else if ((ui_InterruptStatus & 0x800000) == 0x800000) */ + }return ; }
Signature · 1 line
2.1.0
PATCH 3/4 staging: comedi: hwdrv_apci1500: clean some whitespace style issues
In reply to Chase SouthwoodNow that commented out code has been removed, else statements can move to the same line as the close brace of the if statement. Also, a blank line has been added between declarations and code where needed.
--- .../comedi/drivers/addi-data/hwdrv_apci1500.c | 139 ++++++++------------- 1 file changed, 49 insertions(+), 90 deletions(-)
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c +49 -90
@@ -172,12 +172,10 @@ static int apci1500_di_config(struct comedi_device *dev,if (data[0 ] ==1 ) { i_MaxChannel =8 ; - } -else { + }else {if (data[0 ] ==2 ) { i_MaxChannel =6 ; - } -else { + }else {dev_warn (dev->hw_dev,"The specified port event does not exist\n" );return -EINVAL ;
@@ -347,8 +345,7 @@ static int apci1500_di_config(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); - } -else { + }else {dev_warn (dev->hw_dev,"The choice for interrupt logic does not exist\n" );return -EINVAL ;
@@ -448,8 +445,7 @@ static int apci1500_di_config(struct comedi_device *dev,outb (0xF4 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"The choice for interrupt logic does not exist\n" );return -EINVAL ;
@@ -518,8 +514,7 @@ static int apci1500_di_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); - } -else { + }else {dev_warn (dev->hw_dev,"Event 1 not initialised\n" );return -EINVAL ;
@@ -555,15 +550,13 @@ static int apci1500_di_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); i_Event2InterruptStatus =1 ; - } -else { + }else {dev_warn (dev->hw_dev,"Event 2 not initialised\n" );return -EINVAL ; } } - } -else { + }else {dev_warn (dev->hw_dev,"The port parameter is in error\n" );return -EINVAL ;
@@ -600,8 +593,7 @@ static int apci1500_di_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); i_Event1InterruptStatus =0 ; - } -else { + }else {dev_warn (dev->hw_dev,"Event 1 not initialised\n" );return -EINVAL ;
@@ -630,16 +622,15 @@ static int apci1500_di_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); i_Event2InterruptStatus =0 ; - } -else { + }else { +dev_warn (dev->hw_dev,"Event 2 not initialised\n" );return -EINVAL ; } } - } -else { + }else {dev_warn (dev->hw_dev,"The port parameter is in error\n" );return -EINVAL ;
@@ -843,8 +834,7 @@ static int apci1500_do_write(struct comedi_device *dev, data[0 ] = (data[0 ] << ui_NoOfChannel) | ui_Temp;outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); - } -else { + }else {if (data[1 ] ==1 ) {switch (ui_NoOfChannel) {
@@ -880,15 +870,13 @@ static int apci1500_do_write(struct comedi_device *dev,outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); - } -else { + }else {dev_warn (dev->hw_dev,"Specified channel not supported\n" );return -EINVAL ; } } - } -else { + }else {if (data[3 ] ==1 ) {if (data[1 ] ==0 ) { data[0 ] = ~data[0 ] &0x1 ;
@@ -902,8 +890,7 @@ static int apci1500_do_write(struct comedi_device *dev,outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); - } -else { + }else {if (data[1 ] ==1 ) {switch (ui_NoOfChannel) {
@@ -959,15 +946,13 @@ static int apci1500_do_write(struct comedi_device *dev,outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); - } -else { + }else {dev_warn (dev->hw_dev,"Specified channel not supported\n" );return -EINVAL ; } } - } -else { + }else {dev_warn (dev->hw_dev,"Specified functionality does not exist\n" );return -EINVAL ;
@@ -1004,8 +989,7 @@ static int apci1500_timer_config(struct comedi_device *dev,/* Selection of the input clock */ if (data[0 ] ==0 || data[0 ] ==1 || data[0 ] ==2 ) {outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_CLK_SELECT ); - } -else { + }else {if (data[0 ] !=3 ) {dev_warn (dev->hw_dev,"The option for input clock selection does not exist\n" );
@@ -1132,14 +1116,12 @@ static int apci1500_timer_config(struct comedi_device *dev,outb (0x2 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Error in selection of interrupt enable or disable\n" );return -EINVAL ; } - } -else { + }else {dev_warn (dev->hw_dev,"Error in selection of reload value\n" );return -EINVAL ;
@@ -1294,14 +1276,12 @@ static int apci1500_timer_config(struct comedi_device *dev,outb (0x2 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Error in selection of interrupt enable or disable\n" );return -EINVAL ; } - } -else { + }else {dev_warn (dev->hw_dev,"Error in selection of reload value\n" );return -EINVAL ;
@@ -1359,8 +1339,7 @@ static int apci1500_timer_config(struct comedi_device *dev,/* - Enables retrigger */ /* - Pulses output */ i_TimerCounterMode = data[2 ] | data[4 ] |0x54 ; - } -else { + }else { i_TimerCounterMode = data[2 ] | data[4 ] | data[6 ] |7 ; }/* Test the reload value */
@@ -1456,14 +1435,13 @@ static int apci1500_timer_config(struct comedi_device *dev, } - } -else { + }else { +dev_warn (dev->hw_dev,"Error in selection of interrupt enable or disable\n" );return -EINVAL ; } - } -else { + }else {dev_warn (dev->hw_dev,"Error in selection of reload value\n" );return -EINVAL ;
@@ -1515,8 +1493,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Counter/Timer1 not configured\n" );return -EINVAL ;
@@ -1543,8 +1520,7 @@ static int apci1500_timer_write(struct comedi_device *dev,/* Set Trigger and gate */ i_CommandAndStatusValue =0x6 ; - } -else { + }else {/* Set Trigger */ i_CommandAndStatusValue =0x2 ;
@@ -1557,8 +1533,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Counter/Timer1 not configured\n" );return -EINVAL ;
@@ -1590,8 +1565,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Counter/Timer2 not configured\n" );return -EINVAL ;
@@ -1617,8 +1591,7 @@ static int apci1500_timer_write(struct comedi_device *dev,/* Set Trigger and gate */ i_CommandAndStatusValue =0x6 ; - } -else { + }else {/* Set Trigger */ i_CommandAndStatusValue =0x2 ;
@@ -1631,8 +1604,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Counter/Timer2 not configured\n" );return -EINVAL ;
@@ -1664,8 +1636,7 @@ static int apci1500_timer_write(struct comedi_device *dev, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); - } -else { + }else {dev_warn (dev->hw_dev,"Watchdog/Counter3 not configured\n" );return -EINVAL ;
@@ -1694,8 +1665,7 @@ static int apci1500_timer_write(struct comedi_device *dev,/* Set Trigger and gate */ i_CommandAndStatusValue =0x6 ; - } -else { + }else {/* Set Trigger */ i_CommandAndStatusValue =0x2 ;
@@ -1708,8 +1678,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (i_CommandAndStatusValue, devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Counter3 not configured\n" );return -EINVAL ;
@@ -1726,8 +1695,7 @@ static int apci1500_timer_write(struct comedi_device *dev,outb (0x6 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Watchdog 3 not configured\n" );return -EINVAL ;
@@ -1774,8 +1742,7 @@ static int apci1500_timer_bits(struct comedi_device *dev,/* Set RCC and gate */ i_CommandAndStatusValue =0xC ; - } -else { + }else {/* Set RCC */ i_CommandAndStatusValue =0x8 ;
@@ -1804,8 +1771,7 @@ static int apci1500_timer_bits(struct comedi_device *dev, data[0 ] = data[0 ] |inb (devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Timer/Counter1 not configured\n" );return -EINVAL ;
@@ -1818,8 +1784,7 @@ static int apci1500_timer_bits(struct comedi_device *dev,/* Set RCC and gate */ i_CommandAndStatusValue =0xC ; - } -else { + }else {/* Set RCC */ i_CommandAndStatusValue =0x8 ;
@@ -1848,8 +1813,7 @@ static int apci1500_timer_bits(struct comedi_device *dev, data[0 ] = data[0 ] |inb (devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - }/* if( i_TimerCounter2Init==1) */ -else { + }else {dev_warn (dev->hw_dev,"Timer/Counter2 not configured\n" );return -EINVAL ;
@@ -1862,8 +1826,7 @@ static int apci1500_timer_bits(struct comedi_device *dev,/* Set RCC and gate */ i_CommandAndStatusValue =0xC ; - } -else { + }else {/* Set RCC */ i_CommandAndStatusValue =0x8 ;
@@ -1892,8 +1855,7 @@ static int apci1500_timer_bits(struct comedi_device *dev, data[0 ] = data[0 ] |inb (devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"WatchdogCounter3 not configured\n" );return -EINVAL ;
@@ -1942,12 +1904,10 @@ static int apci1500_do_bits(struct comedi_device *dev,outl (0x0 , devpriv->i_IobaseAmcc +0x38 );if (data[0 ] ==1 ) { i_Constant =0xC0 ; - } -else { + }else {if (data[0 ] ==0 ) { i_Constant =0x00 ; - } -else { + }else {dev_warn (dev->hw_dev,"The parameter passed to driver is in error for enabling the voltage interrupt\n" );return -EINVAL ;
@@ -2058,6 +2018,8 @@ static void apci1500_interrupt(int irq, void *d)struct addi_private *devpriv = dev->private;unsigned int ui_InterruptStatus =0 ;int i_RegValue =0 ; + +/* Clear the interrupt mask */ i_InterruptMask =0 ;/* Read the board interrupt status */
@@ -2102,8 +2064,7 @@ static void apci1500_interrupt(int irq, void *d) i_InputChannel =1 + (i_RegValue >>1 ); - } -else { + }else { i_InputChannel =0 ; } }
@@ -2145,8 +2106,7 @@ static void apci1500_interrupt(int irq, void *d) i_InterruptMask = i_InterruptMask |0x80 ; } - } -else { + }else { i_InterruptMask = i_InterruptMask |2 ; } }
@@ -2215,8 +2175,7 @@ static void apci1500_interrupt(int irq, void *d) devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);/* Authorizes the main interrupt on the board */ outb (0xD0 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); - } -else { + }else {dev_warn (dev->hw_dev,"Interrupt from unknown source\n" );
Signature · 1 line
2.1.0
PATCH 4/4 staging: comedi: hwdrv_apci1500: miscellaneous cleanup
In reply to Chase SouthwoodThis patch completes two final matters of cleanup which are each too small for their own patch. It corrects a couple of indentation issues and removes a return statement at the end of a void function.
--- .../staging/comedi/drivers/addi-data/hwdrv_apci1500.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c +9 -10
@@ -986,7 +986,7 @@ static int apci1500_timer_config(struct comedi_device *dev, devpriv->tsk_Current = current; -/* Selection of the input clock */ +/* Selection of the input clock */ if (data[0 ] ==0 || data[0 ] ==1 || data[0 ] ==2 ) {outw (data[0 ], devpriv->i_IobaseAddon +APCI1500_CLK_SELECT ); }else {
@@ -2180,7 +2180,6 @@ static void apci1500_interrupt(int irq, void *d) "Interrupt from unknown source\n"); } -return ; }static int apci1500_reset (struct comedi_device *dev)
@@ -2329,36 +2328,36 @@ static int apci1500_reset(struct comedi_device *dev)outb (0 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER );/* reset all the digital outputs */ outw (0x0 , devpriv->i_IobaseAddon +APCI1500_DIGITAL_OP ); -/* Disable the board interrupt */ +/* Disable the board interrupt */ /* Selects the master interrupt control register */ outb (APCI1500_RW_MASTER_INTERRUPT_CONTROL , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); -/* Deactivates all interrupts */ +/* Deactivates all interrupts */ outb (0 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER );/* Selects the command and status register of port A */ outb (APCI1500_RW_PORT_A_COMMAND_AND_STATUS , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); -/* Deactivates all interrupts */ +/* Deactivates all interrupts */ outb (0x00 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER );/* Selects the command and status register of port B */ outb (APCI1500_RW_PORT_B_COMMAND_AND_STATUS , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); -/* Deactivates all interrupts */ +/* Deactivates all interrupts */ outb (0x00 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER );/* Selects the command and status register of timer 1 */ outb (APCI1500_RW_CPT_TMR1_CMD_STATUS , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); -/* Deactivates all interrupts */ +/* Deactivates all interrupts */ outb (0x00 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER );/* Selects the command and status register of timer 2 */ outb (APCI1500_RW_CPT_TMR2_CMD_STATUS , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); -/* Deactivates all interrupts */ +/* Deactivates all interrupts */ outb (0x00 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); -/* Selects the command and status register of timer 3*/ +/* Selects the command and status register of timer 3*/ outb (APCI1500_RW_CPT_TMR3_CMD_STATUS , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER ); -/* Deactivates all interrupts */ +/* Deactivates all interrupts */ outb (0x00 , devpriv->iobase +APCI1500_Z8536_CONTROL_REGISTER );return 0 ; }
Signature · 1 line
2.1.0
Quoted 4 lines · Chase Southwood
This patchset begins by removing unneeded braces and commented out lines of code, and then tidies whitespace issues that are revealed after the braces/dead code is removed.
Quoted 9 lines
Chase Southwood (4):
staging: comedi:hwdrv_apci1500: remove unneeded braces
staging: comedi:hwdrv_apci1500: remove commented out code
staging: comedi:hwdrv_apci1500: clean some whitespace style issues
staging: comedi:hwdrv_apci1500: miscellaneous cleanup.../comedi/drivers/addi-data/hwdrv_apci1500.c | 349 +++++++++------------ 1 file changed, 149 insertions(+), 200 deletions(-)
Signature · 2 lines
-=( Ian Abbott @ MEV Ltd. E-mail: <[email protected]> )=- -=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-