iMX6Q:arm2: Add the kernel FDT Loading support
PATCH 1/4 iMX6Q:arm2: Add the kernel FDT Loading support
To support loading FDT file for kernel, add the fdt address, file and loading script to arm2 board default environment.
--- include/configs/mx6qarm2.h | 41 ++++++++++++++++++++++++++++++++++++++--- 1 files changed, 38 insertions(+), 3 deletions(-)
include/configs/mx6qarm2.h +38 -3
@@ -67,15 +67,19 @@#define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_LOADADDR 0x12000000#define CONFIG_SYS_TEXT_BASE 0x17800000#define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc3\0" \ + "fdt_file=imx6q-arm2.dtb\0" \ + "fdt_addr=0x18000000\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=1\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
@@ -86,15 +90,46 @@"bootscript=echo Running bootscript from mmc ...; " \"source\0" \"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ +"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \ -"bootz\0" \ +"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ +"if run loadfdt; then " \ +"bootz ${loadaddr} - ${fdt_addr}; " \ +"else " \ +"if test ${boot_fdt} = try; then " \ +"bootz; " \ +"else " \ +"echo WARN: Cannot load the DT; " \ +"fi; " \ +"fi; " \ +"else " \ +"bootz; " \ +"fi;\0" \"netargs=setenv bootargs console=${console},${baudrate} " \"root=/dev/nfs " \"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \"netboot=echo Booting from net ...; " \"run netargs; " \ -"dhcp ${image}; bootz\0" \ +"if test ${ip_dyn} = yes; then " \ +"setenv get_cmd dhcp; " \ +"else " \ +"setenv get_cmd tftp; " \ +"fi; " \ +"${get_cmd} ${image}; " \ +"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ +"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ +"bootz ${loadaddr} - ${fdt_addr}; " \ +"else " \ +"if test ${boot_fdt} = try; then " \ +"bootz; " \ +"else " \ +"echo WARN: Cannot load the DT; " \ +"fi; " \ +"fi; " \ +"else " \ +"bootz; " \ +"fi;\0" #define CONFIG_BOOTCOMMAND \"mmc dev ${mmcdev};" \
Signature · 1 line
1.7.4.1
PATCH 2/4 iMX6Q:arm2: Change the mmcroot and mmcpart env value
1. Set the image load partition to the first FAT partition.
2. Set the kernel rootfs partition to the second partition.
--- include/configs/mx6qarm2.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
include/configs/mx6qarm2.h +2 -2
@@ -81,8 +81,8 @@"boot_fdt=try\0" \"ip_dyn=yes\0" \"mmcdev=1\0" \ -"mmcpart=2\0" \ -"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ +"mmcpart=1\0" \ +"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \"mmcargs=setenv bootargs console=${console},${baudrate} " \"root=${mmcroot}\0" \"loadbootscript=" \
Signature · 1 line
1.7.4.1
PATCH 3/4 iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board
In reply to Ye.LiThis patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2 shared the same board with i.MX6Q ARM2 board since the i.MX6DL is pin-pin compatible with i.MX6Q.
The patch also support the DDR 32-BIT mode option. Please define CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT mode.But due to the board design, it's 64bit DDR buswidth physically, so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.
--- board/freescale/mx6qarm2/imximage_mx6dl.cfg | 143 +++++++++++++++++++++++++++ board/freescale/mx6qarm2/mx6qarm2.c | 4 + configs/mx6dlarm2_defconfig | 3 + configs/mx6qarm2_defconfig | 2 +- include/configs/mx6qarm2.h | 5 +- 5 files changed, 155 insertions(+), 2 deletions(-) create mode 100644 board/freescale/mx6qarm2/imximage_mx6dl.cfg create mode 100644 configs/mx6dlarm2_defconfig
board/freescale/mx6qarm2/imximage_mx6dl.cfg new file +143 -0
@@ -0,0 +1,143 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Jason Liu <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e0798 0x000c0000 +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0588 0x00000030 +DATA 4 0x020e0594 0x00000030 +DATA 4 0x020e056c 0x00000030 +DATA 4 0x020e0578 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e057c 0x00000030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0750 0x00020000 +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e05ac 0x00000030 +DATA 4 0x020e05b4 0x00000030 +DATA 4 0x020e0528 0x00000030 +DATA 4 0x020e0520 0x00000030 +DATA 4 0x020e0514 0x00000030 +DATA 4 0x020e0510 0x00000030 +DATA 4 0x020e05bc 0x00000030 +DATA 4 0x020e05c4 0x00000030 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F +DATA 4 0x021b480c 0x00370037 +DATA 4 0x021b4810 0x00370037 +DATA 4 0x021b083c 0x422f0220 +DATA 4 0x021b0840 0x021f0219 +DATA 4 0x021b483C 0x422f0220 +DATA 4 0x021b4840 0x022d022f +DATA 4 0x021b0848 0x47494b49 +DATA 4 0x021b4848 0x48484c47 +DATA 4 0x021b0850 0x39382b2f +DATA 4 0x021b4850 0x2f35312c +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 +DATA 4 0x021b0004 0x0002002d +DATA 4 0x021b0008 0x00333030 + +DATA 4 0x021b000c 0x40445323 +DATA 4 0x021b0010 0xb66e8c63 + +DATA 4 0x021b0014 0x01ff00db +DATA 4 0x021b0018 0x00081740 +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b002c 0x000026d2 +DATA 4 0x021b0030 0x00440e21 +#ifdef CONFIG_DDR_32BIT +DATA 4 0x021b0040 0x00000017 +DATA 4 0x021b0000 0xc3190000 +#else +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0xc31a0000 +#endif +DATA 4 0x021b001c 0x04008032 +DATA 4 0x021b001c 0x0400803a +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803b +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x07208030 +DATA 4 0x021b001c 0x07208038 +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00000007 +DATA 4 0x021b4818 0x00000007 +DATA 4 0x021b0004 0x0002556d +DATA 4 0x021b4004 0x00011006 +DATA 4 0x021b001c 0x00000000 + +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +DATA 4 0x020e0010 0xF00000CF +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F
board/freescale/mx6qarm2/mx6qarm2.c +4 -0
@@ -224,7 +224,11 @@ int board_init(void)int checkboard (void ) { +#ifdef CONFIG_MX6DL +puts ("Board: MX6DL-Armadillo2\n" ); +#else puts ("Board: MX6Q-Armadillo2\n" ); +#endif return 0 ; }
configs/mx6dlarm2_defconfig new file +3 -0
@@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL" +CONFIG_ARM=y +CONFIG_TARGET_MX6QARM2=y
configs/mx6qarm2_defconfig +1 -1
@@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y
include/configs/mx6qarm2.h +4 -1
@@ -10,7 +10,6 @@#define __CONFIG_H#define CONFIG_MX6 -#define CONFIG_MX6Q #include "mx6_common.h"
@@ -167,7 +166,11 @@/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#ifdef CONFIG_DDR_32BIT +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) +#else #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) +#endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
Signature · 1 line
1.7.4.1
PATCH 4/4 iMX6Q/DL:arm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards
In reply to Ye.LiUpdate the ddr scripts for LPDDR2 and add two build configs for LPDDR2 arm2 board. Since the LPDDR2 arm2 board has different DDR size, use CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE.
--- board/freescale/mx6qarm2/imximage.cfg | 189 +++++++++++++++- board/freescale/mx6qarm2/imximage_mx6dl.cfg | 319 +++++++++++++++++++++++++++ board/freescale/mx6qarm2/mx6qarm2.c | 6 +- configs/mx6dlarm2_defconfig | 2 +- configs/mx6dlarm2_lpddr2_defconfig | 3 + configs/mx6qarm2_defconfig | 2 +- configs/mx6qarm2_lpddr2_defconfig | 3 + include/configs/mx6qarm2.h | 5 - 8 files changed, 515 insertions(+), 14 deletions(-) create mode 100644 configs/mx6dlarm2_lpddr2_defconfig create mode 100644 configs/mx6qarm2_lpddr2_defconfig
board/freescale/mx6qarm2/imximage.cfg +183 -6
@@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Copyright (C) 2011-2014 Freescale Semiconductor, Inc. * Jason Liu <[email protected]> * * SPDX-License-Identifier: GPL-2.0+
@@ -30,6 +30,185 @@ BOOT_FROM sd * Address absolute address of the register * value value to be stored in the register */ +#ifdef CONFIG_MX6DQ_LPDDR2 +/* DCD */ +DATA 4 0x020C4018 0x60324 + +DATA 4 0x020E05a8 0x00003038 +DATA 4 0x020E05b0 0x00003038 +DATA 4 0x020E0524 0x00003038 +DATA 4 0x020E051c 0x00003038 + +DATA 4 0x020E0518 0x00003038 +DATA 4 0x020E050c 0x00003038 +DATA 4 0x020E05b8 0x00003038 +DATA 4 0x020E05c0 0x00003038 + +DATA 4 0x020E05ac 0x00000038 +DATA 4 0x020E05b4 0x00000038 +DATA 4 0x020E0528 0x00000038 +DATA 4 0x020E0520 0x00000038 + +DATA 4 0x020E0514 0x00000038 +DATA 4 0x020E0510 0x00000038 +DATA 4 0x020E05bc 0x00000038 +DATA 4 0x020E05c4 0x00000038 + +DATA 4 0x020E056c 0x00000038 +DATA 4 0x020E0578 0x00000038 +DATA 4 0x020E0588 0x00000038 +DATA 4 0x020E0594 0x00000038 + +DATA 4 0x020E057c 0x00000038 +DATA 4 0x020E0590 0x00000038 +DATA 4 0x020E0598 0x00000038 +DATA 4 0x020E058c 0x00000000 + +DATA 4 0x020E059c 0x00000038 +DATA 4 0x020E05a0 0x00000038 +DATA 4 0x020E0784 0x00000038 +DATA 4 0x020E0788 0x00000038 + +DATA 4 0x020E0794 0x00000038 +DATA 4 0x020E079c 0x00000038 +DATA 4 0x020E07a0 0x00000038 +DATA 4 0x020E07a4 0x00000038 + +DATA 4 0x020E07a8 0x00000038 +DATA 4 0x020E0748 0x00000038 +DATA 4 0x020E074c 0x00000038 +DATA 4 0x020E0750 0x00020000 + +DATA 4 0x020E0758 0x00000000 +DATA 4 0x020E0774 0x00020000 +DATA 4 0x020E078c 0x00000038 +DATA 4 0x020E0798 0x00080000 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b401c 0x00008000 + +DATA 4 0x021b085c 0x1b5f01ff +DATA 4 0x021b485c 0x1b5f01ff + +DATA 4 0x021b0800 0xa1390000 +DATA 4 0x021b4800 0xa1390000 + +DATA 4 0x021b0890 0x00400000 +DATA 4 0x021b4890 0x00400000 + +DATA 4 0x021b48bc 0x00055555 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b082c 0xf3333333 +DATA 4 0x021b0830 0xf3333333 +DATA 4 0x021b0834 0xf3333333 +DATA 4 0x021b0838 0xf3333333 +DATA 4 0x021b482c 0xf3333333 +DATA 4 0x021b4830 0xf3333333 +DATA 4 0x021b4834 0xf3333333 +DATA 4 0x021b4838 0xf3333333 + +DATA 4 0x021b0848 0x49383b39 +DATA 4 0x021b0850 0x30364738 +DATA 4 0x021b4848 0x3e3c3846 +DATA 4 0x021b4850 0x4c294b35 + +DATA 4 0x021b083c 0x20000000 +DATA 4 0x021b0840 0x0 +DATA 4 0x021b483c 0x20000000 +DATA 4 0x021b4840 0x0 + +DATA 4 0x021b0858 0xf00 +DATA 4 0x021b4858 0xf00 + +DATA 4 0x021b08b8 0x800 +DATA 4 0x021b48b8 0x800 + +DATA 4 0x021b000c 0x555a61a5 +DATA 4 0x021b0004 0x20036 +DATA 4 0x021b0010 0x160e83 +DATA 4 0x021b0014 0xdd +DATA 4 0x021b0018 0x8174c +DATA 4 0x021b002c 0xf9f26d2 +DATA 4 0x021b0030 0x20e +DATA 4 0x021b0038 0x200aac +DATA 4 0x021b0008 0x0 + +DATA 4 0x021b0040 0x5f + +DATA 4 0x021b0000 0xc3010000 + +DATA 4 0x021b400c 0x555a61a5 +DATA 4 0x021b4004 0x20036 +DATA 4 0x021b4010 0x160e83 +DATA 4 0x021b4014 0xdd +DATA 4 0x021b4018 0x8174c +DATA 4 0x021b402c 0xf9f26d2 +DATA 4 0x021b4030 0x20e +DATA 4 0x021b4038 0x200aac +DATA 4 0x021b4008 0x0 + +DATA 4 0x021b4040 0x3f +DATA 4 0x021b4000 0xc3010000 + +DATA 4 0x021b001c 0x3f8030 +DATA 4 0x021b001c 0xff0a8030 +DATA 4 0x021b001c 0xc2018030 +DATA 4 0x021b001c 0x6028030 +DATA 4 0x021b001c 0x2038030 + +DATA 4 0x021b401c 0x3f8030 +DATA 4 0x021b401c 0xff0a8030 +DATA 4 0x021b401c 0xc2018030 +DATA 4 0x021b401c 0x6028030 +DATA 4 0x021b401c 0x2038030 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 + +DATA 4 0x021b0020 0x7800 +DATA 4 0x021b4020 0x7800 + +DATA 4 0x021b0818 0x0 +DATA 4 0x021b4818 0x0 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 + +DATA 4 0x021b08b8 0x800 +DATA 4 0x021b48b8 0x800 + +DATA 4 0x021b001c 0x0 +DATA 4 0x021b401c 0x0 + +DATA 4 0x021b0404 0x00011006 + +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +#else DATA 4 0x020e05a8 0x00000030 DATA 4 0x020e05b0 0x00000030 DATA 4 0x020e0524 0x00000030
@@ -142,12 +321,8 @@ DATA 4 0x021b48b8 0x00000800 DATA 4 0x021b001c 0x00000000 DATA 4 0x021b0404 0x00011006 -DATA 4 0x020e0010 0xF00000FF -DATA 4 0x020e0018 0x00070007 -DATA 4 0x020e001c 0x00070007 - DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC00 +DATA 4 0x020c406c 0x0030FC03 DATA 4 0x020c4070 0x0FFFC000 DATA 4 0x020c4074 0x3FF00000 DATA 4 0x020c4078 0x00FFF300
@@ -159,3 +334,5 @@ DATA 4 0x020e0010 0xF00000CF /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F + +#endif /* CONFIG_MX6DQ_LPDDR2 */
board/freescale/mx6qarm2/imximage_mx6dl.cfg +319 -0
328 lines not on this page · raw message
board/freescale/mx6qarm2/mx6qarm2.c +5 -1
@@ -32,7 +32,11 @@ DECLARE_GLOBAL_DATA_PTR;int dram_init (void ) { - gd->ram_size =get_ram_size ((void *)PHYS_SDRAM ,PHYS_SDRAM_SIZE ); +#ifdef CONFIG_DDR_32BIT + gd->ram_size = (phys_size_t )CONFIG_DDR_MB *512 *1024 ; +#else + gd->ram_size = (phys_size_t )CONFIG_DDR_MB *1024 *1024 ; +#endif return 0 ; }
configs/mx6dlarm2_defconfig +1 -1
@@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,DDR_MB=2048" CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y
configs/mx6dlarm2_lpddr2_defconfig new file +3 -0
@@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,MX6DL_LPDDR2,DDR_MB=512" +CONFIG_ARM=y +CONFIG_TARGET_MX6QARM2=y
configs/mx6qarm2_defconfig +1 -1
@@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,DDR_MB=2048" CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y
configs/mx6qarm2_lpddr2_defconfig new file +3 -0
@@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,MX6DQ_LPDDR2,DDR_MB=512" +CONFIG_ARM=y +CONFIG_TARGET_MX6QARM2=y
include/configs/mx6qarm2.h +0 -5
@@ -166,11 +166,6 @@/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#ifdef CONFIG_DDR_32BIT -#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) -#else -#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) -#endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
Signature · 1 line
1.7.4.1
PATCH 4/4 iMX6Q/DL:arm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards
Hi Ye,
Quoted 7 lines · Ye.Li
board/freescale/mx6qarm2/mx6qarm2.c +0
-0@@ -32,7 +32,11 @@ DECLARE_GLOBAL_DATA_PTR;int dram_init (void )
board/freescale/mx6qarm2/mx6qarm2.c DECLARE_GLOBAL_DATA_PTR; · line 42
Quoted 10 lines
board/freescale/mx6qarm2/mx6qarm2.c +5
-1{ - gd->ram_size =get_ram_size ((void *)PHYS_SDRAM ,PHYS_SDRAM_SIZE ); +#ifdef CONFIG_DDR_32BIT + gd->ram_size = (phys_size_t )CONFIG_DDR_MB *512 *1024 ; +#else + gd->ram_size = (phys_size_t )CONFIG_DDR_MB *1024 *1024 ; +#endif return 0 ; }
I thought this (CONFIG_DDR_32BIT) is true only for mx6dlarm2 DDR3 board.