Skip to contentSkip to conversation

ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi

PATCH New Dylan Reid 2 participants 3 messages Sep 4, 2014 – Sep 5, 2014

Subsystems (3)
lore
Share & tools
lore

Dylan Reid

author
#0 lore raw

PATCH v3 1/2 ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi

These labels will be used by other boards in addition to Venice2, move them to tegra124.dtsi so they are defined in a common place.

---
This patch first appeared in v3 of this series.

---
 arch/arm/boot/dts/tegra124-venice2.dts | 4 ++--
 arch/arm/boot/dts/tegra124.dtsi        | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/tegra124-venice2.dts +2 -2
index dcbe585..a076a2c 100644
@@ -36,7 +36,7 @@
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux: dpaux at 0,545c0000 {
+		dpaux at 0,545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
@@ -587,7 +587,7 @@
 		status = "okay";
 	};
 
-	pwm: pwm at 0,7000a000 {
+	pwm at 0,7000a000 {
 		status = "okay";
 	};
 
arch/arm/boot/dts/tegra124.dtsi +2 -2
index a6e4814..0ba3a0b 100644
@@ -78,7 +78,7 @@
 			status = "disabled";
 		};
 
-		dpaux at 0,545c0000 {
+		dpaux: dpaux at 0,545c0000 {
 			compatible = "nvidia,tegra124-dpaux";
 			reg = <0x0 0x545c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
@@ -272,7 +272,7 @@
 		status = "disabled";
 	};
 
-	pwm at 0,7000a000 {
+	pwm: pwm at 0,7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
Signature · 1 line
2.1.0.rc2.206.gedb03e5
author
#1 lore raw

PATCH v3 2/2 ARM: tegra: add Acer Chromebook 13 device tree

The Acer Chromebook 13, codenamed Big, contains an NVIDIA tegra124 processor and is similar to the Venice2 reference platform.

The keyboard, USB 2, audio, sdcard and emmc have been tested and work on the 1366x768 models. The Full HD models haven't been tested yet.

WiFi does not yet work, it needs at least some PMIC changes to enable the 32k clock.

The elan trackpad is not yet functional but hopefully will be soon as there are patches under review.

There is also an issue on reboot because the TPM isn't reset. It will cause the stock firmware to enter recovery mode. This can be worked around by an EC-reset, press the refresh and power keys at the same time.

---
Changes since v2:
labels moved to tegra124.dtsi
pinmux label removed
typo fixed in commit message.

---
 arch/arm/boot/dts/Makefile              |    1 +
 arch/arm/boot/dts/tegra124-nyan-big.dts | 1136 +++++++++++++++++++++++++++++++
 2 files changed, 1137 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra124-nyan-big.dts
arch/arm/boot/dts/Makefile +1 -0
index b8c5cd3..25d0b9f 100644
@@ -440,6 +440,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra114-roth.dtb \
 	tegra114-tn7.dtb \
 	tegra124-jetson-tk1.dtb \
+	tegra124-nyan-big.dtb \
 	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
 dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
arch/arm/boot/dts/tegra124-nyan-big.dts new file +1136 -0

1,136 lines not on this page · raw message

Signature · 1 line
2.1.0.rc2.206.gedb03e5
#2 lore raw

PATCH v3 1/2 ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi

In reply to Dylan Reid
Quoted 2 lines · Dylan Reid

These labels will be used by other boards in addition to Venice2, move them to tegra124.dtsi so they are defined in a common place.

I've applied the series to Tegra's for-3.18/dt branch.