imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
PATCH 1/1 imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
nitrogen6x.h file defines CONFIG_CMD_FS_GENERIC, so we are able to use generic 'load' command instead of 'fatload'. It allows to use ext filesystem and keep compatibilty with fat filesystem.
--- include/configs/nitrogen6x.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
include/configs/nitrogen6x.h +3 -3
@@ -192,11 +192,11 @@"mmcargs=setenv bootargs console=${console},${baudrate} " \"root=${mmcroot}\0" \"loadbootscript=" \ -"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \"bootscript=echo Running bootscript from mmc ...; " \"source\0" \ -"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ -"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ +"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ +"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
Signature · 1 line
1.8.4.5
PATCH 1/1 imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
Quoted 6 lines · Guillaume GARDET
nitrogen6x.hfile definesCONFIG_CMD_FS_GENERIC, so we are able to use generic 'load' command instead of 'fatload'. It allows to use ext filesystem and keep compatibilty with fat filesystem.Signed-off-by Guillaume GARDET <[email protected]>Cc Stefano Babic <[email protected]>
Adding Eric Nelson on Cc.
Quoted 30 lines
--- include/configs/nitrogen6x.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)include/configs/nitrogen6x.h +3
-4@@ -192,11 +192,11 @@"mmcargs=setenv bootargs console=${console},${baudrate} " \"root=${mmcroot}\0" \"loadbootscript=" \ -"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \"bootscript=echo Running bootscript from mmc ...; " \"source\0" \ -"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ -"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ +"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ +"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ --1.8.4.5
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
PATCH 1/1 imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
Hi all,
Quoted 11 lines · Fabio Estevam
Quoted 6 lines · Guillaume GARDET
nitrogen6x.hfile definesCONFIG_CMD_FS_GENERIC, so we are able to use generic 'load' command instead of 'fatload'. It allows to use ext filesystem and keep compatibilty with fat filesystem.Signed-off-by Guillaume GARDET <[email protected]>Cc Stefano Babic <[email protected]>Adding Eric Nelson on Cc.
Thanks Fabio. I stopped delivery from the list while on vacation and hadn't re-started it.
Quoted 9 lines
include/configs/nitrogen6x.h
Quoted 9 lines
--- include/configs/nitrogen6x.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)include/configs/nitrogen6x.h +0
-0@@ -192,11 +192,11 @@
I've been wondering if anyone was using this section of nitrogen6x.h, and I guess this answers the question.
Quoted 9 lines
Quoted 9 lines
include/configs/nitrogen6x.h +1
-3"mmcargs=setenv bootargs console=${console},${baudrate} " \"root=${mmcroot}\0" \"loadbootscript=" \ -"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \"bootscript=echo Running bootscript from mmc ...; " \"source\0" \ -"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ -"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
Quoted 8 lines
Quoted 8 lines
include/configs/nitrogen6x.h +2
-1+"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ +"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ --1.8.4.5
I don't have a copy of the original e-mail, but:
PATCH 1/1 imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
Ping.
Guillaume
Le 01/09/2014 20:27, Eric Nelson a ?crit :
Quoted 50 lines
Hi all,
Quoted 10 lines · Fabio Estevam
Quoted 6 lines · Guillaume GARDET
nitrogen6x.hfile definesCONFIG_CMD_FS_GENERIC, so we are able to use generic 'load' command instead of 'fatload'. It allows to use ext filesystem and keep compatibilty with fat filesystem.Signed-off-by Guillaume GARDET <[email protected]>Cc Stefano Babic <[email protected]>Adding Eric Nelson on Cc.
Thanks Fabio. I stopped delivery from the list while on vacation and hadn't re-started it.
Quoted 9 lines
include/configs/nitrogen6x.h
Quoted 9 lines
--- include/configs/nitrogen6x.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)include/configs/nitrogen6x.h +0
-0@@ -192,11 +192,11 @@I've been wondering if anyone was using this section of
nitrogen6x.h, and I guess this answers the question.Quoted 9 lines
Quoted 9 lines
include/configs/nitrogen6x.h +1
-3"mmcargs=setenv bootargs console=${console},${baudrate} " \"root=${mmcroot}\0" \"loadbootscript=" \ -"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \"bootscript=echo Running bootscript from mmc ...; " \"source\0" \ -"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ -"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \Quoted 8 lines
Quoted 8 lines
include/configs/nitrogen6x.h +2
-1+"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ +"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ --1.8.4.5
I don't have a copy of the original e-mail, but:
Acked-by Eric Nelson <[email protected]>
PATCH 1/1 imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
Hi Guillaume,
Quoted 1 line · Guillaume Gardet
Ping.
Sorry, I was not in office in the last two weeks. I will go through all i.MX patches (it seems I have something to do..) and I will apply the ones are ready, as yours.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/1 imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
In reply to Guillaume GARDETQuoted 8 lines · Guillaume GARDET
nitrogen6x.hfile definesCONFIG_CMD_FS_GENERIC, so we are able to use generic 'load' command instead of 'fatload'. It allows to use ext filesystem and keep compatibilty with fat filesystem.Signed-off-by Guillaume GARDET <[email protected]>Cc Stefano Babic <[email protected]>---
Applied to u-boot-imx, thanks!
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================