imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board
PATCH 1/1 imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board
Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one.
--- include/configs/nitrogen6x.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
include/configs/nitrogen6x.h +14 -11
@@ -186,7 +186,7 @@"fdt_addr=0x18000000\0" \"boot_fdt=try\0" \"ip_dyn=yes\0" \ -"mmcdev=0\0" \ +"mmcdevs=0 1\0" \"mmcpart=1\0" \"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \"mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -238,16 +238,19 @@ "fi;\0"#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" + "for mmcdev in ${mmcdevs}; do " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "done; " \ + "run netboot; "#else #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc1\0" \
Signature · 1 line
1.8.4.5
PATCH 1/1 imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board
Hi Guillaume,
Quoted 28 lines · Guillaume GARDET
Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one.
Signed-off-by Guillaume GARDET <[email protected]>Cc Stefano Babic <[email protected]>Cc Eric Nelson <[email protected]>--- include/configs/nitrogen6x.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)include/configs/nitrogen6x.h +1
-1@@ -186,7 +186,7 @@"fdt_addr=0x18000000\0" \"boot_fdt=try\0" \"ip_dyn=yes\0" \ -"mmcdev=0\0" \ +"mmcdevs=0 1\0" \"mmcpart=1\0" \"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \"mmcargs=setenv bootargs console=${console},${baudrate} " \@@ -238,16 +238,19 @@"fi;\0" #define CONFIG_BOOTCOMMAND \
include/configs/nitrogen6x.h line 250
Quoted 10 lines
include/configs/nitrogen6x.h +0
-10-"mmc dev ${mmcdev}; if mmc rescan; then " \ -"if run loadbootscript; then " \ -"run bootscript; " \ -"else " \ -"if run loaduimage; then " \ -"run mmcboot; " \ -"else run netboot; " \ -"fi; " \ -"fi; " \ -"else run netboot; fi"
If you add one more loop here, you'll end up with something very close to the Nitrogen6x configuration!
Quoted 7 lines
include/configs/nitrogen6x.h +6
-0+"for mmcdev in ${mmcdevs}; do " \ +"mmc dev ${mmcdev}; " \ +"if mmc rescan; then " \ +"if run loadbootscript; then " \ +"run bootscript; " \ +"else " \
include/configs/nitrogen6x.h line 256
Quoted 10 lines
include/configs/nitrogen6x.h +7
-0+"if run loaduimage; then " \ +"run mmcboot; " \ +"fi; " \ +"fi; " \ +"fi; " \ +"done; " \ + "run netboot; "#else #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc1\0" \
PATCH 1/1 imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board
In reply to Guillaume GARDETHi Guillaume,
Quoted 28 lines · Guillaume GARDET
Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one.
Signed-off-by Guillaume GARDET <[email protected]>Cc Stefano Babic <[email protected]>Cc Eric Nelson <[email protected]>--- include/configs/nitrogen6x.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)include/configs/nitrogen6x.h +1
-1@@ -186,7 +186,7 @@"fdt_addr=0x18000000\0" \"boot_fdt=try\0" \"ip_dyn=yes\0" \ -"mmcdev=0\0" \ +"mmcdevs=0 1\0" \"mmcpart=1\0" \"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \"mmcargs=setenv bootargs console=${console},${baudrate} " \@@ -238,16 +238,19 @@"fi;\0" #define CONFIG_BOOTCOMMAND \
include/configs/nitrogen6x.h line 250
Quoted 10 lines
include/configs/nitrogen6x.h +0
-10-"mmc dev ${mmcdev}; if mmc rescan; then " \ -"if run loadbootscript; then " \ -"run bootscript; " \ -"else " \ -"if run loaduimage; then " \ -"run mmcboot; " \ -"else run netboot; " \ -"fi; " \ -"fi; " \ -"else run netboot; fi"
If you add one more loop here, you can get SATA support and end up with something very close to the Nitrogen6x configuration!
Quoted 7 lines
include/configs/nitrogen6x.h +6
-0+"for mmcdev in ${mmcdevs}; do " \ +"mmc dev ${mmcdev}; " \ +"if mmc rescan; then " \ +"if run loadbootscript; then " \ +"run bootscript; " \ +"else " \
include/configs/nitrogen6x.h line 256
Quoted 10 lines
include/configs/nitrogen6x.h +7
-0+"if run loaduimage; then " \ +"run mmcboot; " \ +"fi; " \ +"fi; " \ +"fi; " \ +"done; " \ + "run netboot; "#else #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc1\0" \
PATCH 1/1 imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board
In reply to Guillaume GARDETQuoted 8 lines · Guillaume GARDET
Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one.
Signed-off-by Guillaume GARDET <[email protected]>Cc Stefano Babic <[email protected]>Cc Eric Nelson <[email protected]>---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================