test: dfu: script: wrong md5sum on nand partitions
PATCH 1/1 test: dfu: script: wrong md5sum on nand partitions
when uplaoding a file, at least from a nand partition, the complete mtd nand partition size is transferred. This leads in a wrong md5sum as the filesize is different between the downloaded file and the uploaded file. Limit the uploaded filesize to the downloaded fixes this.
---
Tested this on the siemens boards, with current ml I get:
Init script for generating data necessary for DFU test script OK
=========================================================================================
DFU EP0 transmission test program
Trouble shoot -> disable DBG (even the KERN_DEBUG) in the UDC driver @ -> TRATS2 # dfu 0 mmc 0
=========================================================================================
File: dat_960.img
TX: md5sum:2947e8f573bc34ba3791f991bd2da869
RX: md5sum:cde0b2024d8ddb55eee9d4b51264ad67
-------> FAILED
with this patch:
Init script for generating data necessary for DFU test script OK
=========================================================================================
DFU EP0 transmission test program
Trouble shoot -> disable DBG (even the KERN_DEBUG) in the UDC driver @ -> TRATS2 # dfu 0 mmc 0
=========================================================================================
File: dat_960.img
TX: md5sum:2947e8f573bc34ba3791f991bd2da869
RX: md5sum:2947e8f573bc34ba3791f991bd2da869
-------> OK --- test/dfu/dfu_gadget_test.sh | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
test/dfu/dfu_gadget_test.sh +4 -1
@@ -45,6 +45,7 @@ dfu_test_file () { printf "$COLOUR_GREEN ========================================================================================= $COLOUR_DEFAULT\n" printf "File:$COLOUR_GREEN %s $COLOUR_DEFAULT\n" $1 + filesize=$(stat -c '%s' $1) dfu-util -D $1 -a $TARGET_ALT_SETTING >> $LOG_FILE 2>&1 || die $? echo -n "TX: "
@@ -54,9 +55,11 @@ dfu_test_file () { dfu-util -D ${DIR}/dfudummy.bin -a $TARGET_ALT_SETTING_B >> $LOG_FILE 2>&1 || die $? + N_FILE_FULL=$DIR$RCV_DIR${1:2}"_rcv_full" N_FILE=$DIR$RCV_DIR${1:2}"_rcv" - dfu-util -U $N_FILE -a $TARGET_ALT_SETTING >> $LOG_FILE 2>&1 || die $? + dfu-util -U $N_FILE_FULL -a $TARGET_ALT_SETTING >> $LOG_FILE 2>&1 || die $? + dd if=$N_FILE_FULL of=$N_FILE bs=$filesize count=1 >> $LOG_FILE 2>&1 || die $? echo -n "RX: " calculate_md5sum $N_FILE
Signature · 1 line
1.8.3.1
PATCH 1/1 test: dfu: script: wrong md5sum on nand partitions
Quoted 5 lines · Heiko Schocher
when uplaoding a file, at least from a nand partition, the complete mtd nand partition size is transferred. This leads in a wrong md5sum as the filesize is different between the downloaded file and the uploaded file. Limit the uploaded filesize to the downloaded fixes this.
I was going to say that it'd be better to fix U-Boot's NAND code to transfer the correct amount of data. However, I suppose the correct amount *is* the whole partition for anything other than a filesystem file. As such, I'd suggest replacing "nand" in the patch description with something else, since presumably the exact same issue applies to partitions on eMMC. The issue applies to any partition.
I wonder if there's a way to distinguish between file tests and partition tests in dfu_gadget_test.sh, so that the $N_FILE_FULL -> $N_FILE conversion can be applied only for partitions. Otherwise, a file upload/download test could end up changing (increasing) the file length and this bug wouldn't be detected.
PATCH 1/1 test: dfu: script: wrong md5sum on nand partitions
Hello Stephen,
add Lukasz to Cc ...
Am 12.09.2014 16:53, schrieb Stephen Warren:
Quoted 9 lines · Heiko Schocher
Quoted 5 lines
when uplaoding a file, at least from a nand partition, the complete mtd nand partition size is transferred. This leads in a wrong md5sum as the filesize is different between the downloaded file and the uploaded file. Limit the uploaded filesize to the downloaded fixes this.
I was going to say that it'd be better to fix U-Boot's NAND code to transfer the correct amount of data. However, I suppose the correct amount *is* the whole partition for anything other than a filesystem file. As such, I'd suggest replacing "nand" in the patch description with something else, since presumably the exact same issue applies to partitions on eMMC. The issue applies to any partition.
Yes, you are right.
Quoted 2 lines
I wonder if there's a way to distinguish between file tests and partition tests in
dfu_gadget_test.sh, so that the $N_FILE_FULL -> $N_FILE conversion can be applied only for partitions. Otherwise, a file upload/download test could end up changing (increasing) the file length and this bug wouldn't be detected.
Lukasz could better comment on this ... currently filesize is changed on a raw partition, as the test download for example 960 bytes, and reads back the hole partition size ... which leads in a wrong md5sum.
It would be good to have in the DFU protcol a length parameter ... so a device could at transfer start decide, if the filesize fits into the partition, if not, no need to tranfser the hole file, and detect this error at the end (with a broken partition now) ...
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 1/1 test: dfu: script: wrong md5sum on nand partitions
Hi Heiko,
Quoted 20 lines
Hello Stephen,
add Lukasz to Cc ...
Am 12.09.2014 16:53, schrieb Stephen Warren:
Quoted 7 lines · Heiko Schocher
Quoted 5 lines
when uplaoding a file, at least from a nand partition, the complete mtd nand partition size is transferred. This leads in a wrong md5sum as the filesize is different between the downloaded file and the uploaded file. Limit the uploaded filesize to the downloaded fixes this.
Quoted 7 lines
I was going to say that it'd be better to fix U-Boot's NAND code to transfer the correct amount of data. However, I suppose the correct amount *is* the whole partition for anything other than a filesystem file. As such, I'd suggest replacing "nand" in the patch description with something else, since presumably the exact same issue applies to partitions on eMMC. The issue applies to any partition.
Quoted 1 line
Yes, you are right.
It is the case with testing "raw"/"partition" write.
With NAND the procedure is as follows:
1. Erase NAND (0xFF on the whole partition)
2. Store the new partition (very rarely the partition.img == NAND partition size). Very often partition.img < NAND partition.
3. The NAND code reads the whole partition (including the 0xFF padding).
This padding causes md5sum to be wrong.
Quoted 7 lines
Quoted 6 lines
I wonder if there's a way to distinguish between file tests and partition tests in
dfu_gadget_test.sh, so that the $N_FILE_FULL -> $N_FILE conversion can be applied only for partitions. Otherwise, a file upload/download test could end up changing (increasing) the file length and this bug wouldn't be detected.
Quoted 8 lines
Lukasz could better comment on this ... currently filesize is changed on a raw partition, as the test download for example 960 bytes, and reads back the hole partition size ... which leads in a wrong md5sum.
It would be good to have in the DFU protcol a length parameter ... so a device could at transfer start decide, if the filesize fits into the partition, if not, no need to tranfser the hole file, and detect this error at the end (with a broken partition now) ...
Yes, the lack of "size" parameter is very inconvenient (for example we must then allocate bigger buffers than needed).
However, for testing purposes we can introduce new test file name "part_<file_size>.img" - e.g. part_32M.img.
Then this would indicate the test for the whole partition.
The legacy dat_<file_size>.img (e.g. dat_960.img) would be truncated if needed in the script.
This is a quick solution.
Other thoughts:
1. In the dfu-util repo there is the dfu-prefix tool. It allows generating some special prefix for LPC and TI Stellaris SoCs. Maybe we could think about "u-boot" prefix and put there for example binary size and signature data.
2. The dfu-util 0.7 on the HOST when -l is typed shows the name="" and serial="". If it was possible to add serial, then we could extend dfu-util to show size of the alt setting.
In this way we could always perform truncation on the uploaded file in the host.
Quoted 3 lines
bye,
Heiko
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
PATCH 1/1 test: dfu: script: wrong md5sum on nand partitions
Hello Lukasz,
Am 15.09.2014 11:45, schrieb Lukasz Majewski:
Quoted 26 lines
Hi Heiko,
Quoted 20 lines
Hello Stephen,
add Lukasz to Cc ...
Am 12.09.2014 16:53, schrieb Stephen Warren:
Quoted 7 lines · Heiko Schocher
Quoted 5 lines
when uplaoding a file, at least from a nand partition, the complete mtd nand partition size is transferred. This leads in a wrong md5sum as the filesize is different between the downloaded file and the uploaded file. Limit the uploaded filesize to the downloaded fixes this.
Quoted 7 lines
I was going to say that it'd be better to fix U-Boot's NAND code to transfer the correct amount of data. However, I suppose the correct amount *is* the whole partition for anything other than a filesystem file. As such, I'd suggest replacing "nand" in the patch description with something else, since presumably the exact same issue applies to partitions on eMMC. The issue applies to any partition.
Quoted 1 line
Yes, you are right.
It is the case with testing "raw"/"partition" write.
Quoted 7 lines
With NAND the procedure is as follows:
1. Erase NAND (0xFFon the whole partition)
2. Store the new partition (very rarely the partition.img == NAND partition size). Very often partition.img< NAND partition.
3. The NAND code reads the whole partition (including the0xFFpadding).This padding causes md5sum to be wrong.
Yes.
Quoted 15 lines
Quoted 6 lines
Quoted 5 lines
I wonder if there's a way to distinguish between file tests and partition tests in
dfu_gadget_test.sh, so that the $N_FILE_FULL -> $N_FILE conversion can be applied only for partitions. Otherwise, a file upload/download test could end up changing (increasing) the file length and this bug wouldn't be detected.Quoted 8 lines
Lukasz could better comment on this ... currently filesize is changed on a raw partition, as the test download for example 960 bytes, and reads back the hole partition size ... which leads in a wrong md5sum.
It would be good to have in the DFU protcol a length parameter ... so a device could at transfer start decide, if the filesize fits into the partition, if not, no need to tranfser the hole file, and detect this error at the end (with a broken partition now) ...
Quoted 6 lines
Yes, the lack of "size" parameter is very inconvenient (for example we must then allocate bigger buffers than needed).
However, for testing purposes we can introduce new test file name "part_<file_size>.img" - e.g. part_32M.img.
Then this would indicate the test for the whole partition.
Hmm... yes, but I fear, that every board has different partition size, so we need a lot of files ...
Quoted 4 lines
The legacy dat_<file_size>.img (e.g. dat_960.img) would be truncated if needed in the script.
This is a quick solution.
Yes ... I do not prefer this solution. Why not cutting the readden file to the length we transferred? Or fill the original file with 0xff until we reached the filesize we read from the device?
Quoted 6 lines
Other thoughts:
1. In the dfu-util repo there is the dfu-prefix tool. It allows generating some special prefix for LPC and TI Stellaris SoCs. Maybe we could think about "u-boot" prefix and put there for example binary size and signature data.
Hmm.. I do not like such special headers ... but this is just a personal opinion ...
Quoted 3 lines
2. The dfu-util 0.7 on the HOST when -l is typed shows the name="" and serial="". If it was possible to add serial, then we could extend dfu-util to show size of the alt setting.
[root at ts8 ~]# dfu-util -l
dfu-util 0.7
Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2012 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to dfu-util at lists.gnumonks.org
Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=0, name="spl" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=1, name="spl.backup1" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=2, name="spl.backup2" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=3, name="spl.backup3" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=4, name="u-boot" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=5, name="kernel_a" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=6, name="kernel_b" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=7, name="rootfs" [root at ts8 ~]#
I do not see "serial=" for the siemens boards ...
But if we could add here a "size", that would be a good thing to have, so we coud at least read the size, and if our image fits not in it, break the transfer, before starting it ...
and for the test script, we could read the size, and create a file, which fits into the partition ...
Quoted 2 lines
In this way we could always perform truncation on the uploaded file in the host.
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 1/1 test: dfu: script: wrong md5sum on nand partitions
Hi Heiko,
Quoted 66 lines
Hello Lukasz,
Am 15.09.2014 11:45, schrieb Lukasz Majewski:
Quoted 26 lines
Hi Heiko,
Quoted 20 lines
Hello Stephen,
add Lukasz to Cc ...
Am 12.09.2014 16:53, schrieb Stephen Warren:
Quoted 7 lines · Heiko Schocher
Quoted 5 lines
when uplaoding a file, at least from a nand partition, the complete mtd nand partition size is transferred. This leads in a wrong md5sum as the filesize is different between the downloaded file and the uploaded file. Limit the uploaded filesize to the downloaded fixes this.
Quoted 7 lines
I was going to say that it'd be better to fix U-Boot's NAND code to transfer the correct amount of data. However, I suppose the correct amount *is* the whole partition for anything other than a filesystem file. As such, I'd suggest replacing "nand" in the patch description with something else, since presumably the exact same issue applies to partitions on eMMC. The issue applies to any partition.
Quoted 1 line
Yes, you are right.
It is the case with testing "raw"/"partition" write.
Quoted 8 lines
With NAND the procedure is as follows:
1. Erase NAND (0xFFon the whole partition)
2. Store the new partition (very rarely the partition.img == NAND partition size). Very often partition.img< NAND partition.
3. The NAND code reads the whole partition (including the0xFFpadding).This padding causes md5sum to be wrong.
Yes.
Quoted 16 lines
Quoted 11 lines
Quoted 5 lines
I wonder if there's a way to distinguish between file tests and partition tests in
dfu_gadget_test.sh, so that the $N_FILE_FULL -> $N_FILE conversion can be applied only for partitions. Otherwise, a file upload/download test could end up changing (increasing) the file length and this bug wouldn't be detected.Lukasz could better comment on this ... currently filesize is changed on a raw partition, as the test download for example 960 bytes, and reads back the hole partition size ... which leads in a wrong md5sum.
Quoted 4 lines
It would be good to have in the DFU protcol a length parameter ... so a device could at transfer start decide, if the filesize fits into the partition, if not, no need to tranfser the hole file, and detect this error at the end (with a broken partition now) ...
Quoted 6 lines
Yes, the lack of "size" parameter is very inconvenient (for example we must then allocate bigger buffers than needed).
However, for testing purposes we can introduce new test file name "part_<file_size>.img" - e.g. part_32M.img.
Then this would indicate the test for the whole partition.Hmm... yes, but I fear, that every board has different partition size, so we need a lot of files ...
Quoted 7 lines
Quoted 4 lines
The legacy dat_<file_size>.img (e.g. dat_960.img) would be truncated if needed in the script.
This is a quick solution.
Yes ... I do not prefer this solution. Why not cutting the readden file to the length we transferred?
I think that the truncation of the received file is acceptable. If we were about to test partition write, then we could prepare images with the size equal to the partition size.
Quoted 36 lines
Or fill the original file with
0xffuntil we reached the filesize we read from the device?Quoted 6 lines
Other thoughts:
1. In the dfu-util repo there is the dfu-prefix tool. It allows generating some special prefix for LPC and TI Stellaris SoCs. Maybe we could think about "u-boot" prefix and put there for example binary size and signature data.
Hmm.. I do not like such special headers ... but this is just a personal opinion ...
Quoted 3 lines
2. The dfu-util 0.7 on the HOST when -l is typed shows the name="" and serial="". If it was possible to add serial, then we could extend dfu-util to show size of the alt setting.
[root at ts8 ~]# dfu-util -l
dfu-util 0.7Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2012 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to dfu-util at lists.gnumonks.org
Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=0, name="spl" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=1, name="spl.backup1" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=2, name="spl.backup2" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=3, name="spl.backup3" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=4, name="u-boot" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=5, name="kernel_a" Found DFU: [0908:02c5] devnum=0, cfg=1, intf=0, alt=6, name="kernel_b" Found DFU:
[0908:02c5] devnum=0, cfg=1, intf=0, alt=7, name="rootfs" [root at ts8 ~]#
Quoted 1 line
I do not see "serial=" for the siemens boards ...
This is strange. Could you checkout and build following dfu-util version:
Repository:
dfu-util-repo git://gitorious.org/dfu-util/dfu-util.git
SHA1: dc15eefbb8f928aed932fa1e8daa341e34d0b096
With exynos I see the serial="" output.
Quoted 13 lines
But if we could add here a "size", that would be a good thing to have, so we coud at least read the size, and if our image fits not in it, break the transfer, before starting it ...
and for the test script, we could read the size, and create a file, which fits into the partition ...
Quoted 2 lines
In this way we could always perform truncation on the uploaded file in the host.
bye,
Heiko
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
PATCH 1/1 test: dfu: script: wrong md5sum on nand partitions
Quoted 8 lines · Lukasz Majewski
Hi Heiko,
Quoted 6 lines
Hello Lukasz,
Am 15.09.2014 11:45, schrieb Lukasz Majewski:
Quoted 3 lines
The legacy dat_<file_size>.img (e.g. dat_960.img) would be truncated if needed in the script.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
This is a quick solution.
Yes ... I do not prefer this solution. Why not cutting the readden file to the length we transferred?
I think that the truncation of the received file is acceptable. If we were about to test partition write, then we could prepare images with the size equal to the partition size.
Keep in mind that the exact partition size can vary, even for the same board, due to bad blocks.
-Scott