ARM: zynq: Add ISL9305 regulator on Parallella board
Subsystems (2)
PATCH 1/1 ARM: zynq: Add ISL9305 regulator on Parallella board
There is an ISL9305 regulator on the Parallella board, add it to the DT along with descriptions of all the supplies.
--- arch/arm/boot/dts/zynq-parallella.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
arch/arm/boot/dts/zynq-parallella.dts +23 -0
@@ -53,6 +53,29 @@ &i2c0 { status = "okay"; + + isl9305: isl9305 at 68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + dcd2 { + regulator-name = "1P35V"; + regulator-always-on; + }; + ldo1 { + regulator-name = "VDD_ADJ"; + }; + ldo2 { + regulator-name = "VDD_GPIO"; + regulator-always-on; + }; + }; + }; }; &sdhci1 {
Signature · 1 line
2.1.0
Michal Simek
AppliedPATCH 1/1 ARM: zynq: Add ISL9305 regulator on Parallella board
Quoted 33 lines · Mark Brown
There is an ISL9305 regulator on the Parallella board, add it to the DT along with descriptions of all the supplies.
Signed-off-by Mark Brown <[email protected]>--- arch/arm/boot/dts/zynq-parallella.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)arch/arm/boot/dts/zynq-parallella.dts +16
-0@@ -53,6 +53,29 @@ &i2c0 { status = "okay"; + + isl9305: isl9305 at 68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + dcd2 { + regulator-name = "1P35V"; + regulator-always-on; + }; + ldo1 { + regulator-name = "VDD_ADJ";
arch/arm/boot/dts/zynq-parallella.dts line 81
Quoted 10 lines
arch/arm/boot/dts/zynq-parallella.dts +7
-0+ }; + ldo2 { + regulator-name = "VDD_GPIO"; + regulator-always-on; + }; + }; + }; }; &sdhci1 {
Applied.
Thanks,
Michal
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140915/e6fab1ba/attachment.sig>
PATCH 1/1 ARM: zynq: Add ISL9305 regulator on Parallella board
Am 15.09.2014 um 15:26 schrieb Michal Simek:
Quoted 42 lines · Mark Brown
Quoted 41 lines
There is an ISL9305 regulator on the Parallella board, add it to the DT along with descriptions of all the supplies.
Signed-off-by Mark Brown <[email protected]>--- arch/arm/boot/dts/zynq-parallella.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)arch/arm/boot/dts/zynq-parallella.dts +23
-0@@ -53,6 +53,29 @@ &i2c0 { status = "okay"; + + isl9305: isl9305 at 68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + dcd2 { + regulator-name = "1P35V"; + regulator-always-on; + }; + ldo1 { + regulator-name = "VDD_ADJ"; + }; + ldo2 { + regulator-name = "VDD_GPIO"; + regulator-always-on; + }; + }; + }; };
Quoted 4 lines
arch/arm/boot/dts/zynq-parallella.dts line 81
Quoted 2 lines
arch/arm/boot/dts/zynq-parallella.dts +0
-0&sdhci1 {Applied.
Where exactly on the board did you spot that regulator? I did not spot it on my pre-ordered board and wonder whether it might be a difference of the revised RS-distributed board with the large heat sink?
Thanks,
Andreas
Signature · 10 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140915/4ae73903/attachment.sig>
PATCH 1/1 ARM: zynq: Add ISL9305 regulator on Parallella board
Quoted 7 lines · Andreas F?rber
Am 15.09.2014 um 15:26 schrieb Michal Simek:
Quoted 1 line
Applied.
Where exactly on the board did you spot that regulator? I did not spot it on my pre-ordered board and wonder whether it might be a difference of the revised RS-distributed board with the large heat sink?
I didn't actually identify the physical device on the board, it's on
sheet 16 of the schematic. The device is responsive to I2C and I'm
reading back the settings I'm expecting from the hardware.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140915/eea459d4/attachment.sig>
PATCH 1/1 ARM: zynq: Add ISL9305 regulator on Parallella board
Quoted 5 lines · Mark Brown
Quoted 3 lines · Andreas F?rber
Am 15.09.2014 um 15:26 schrieb Michal Simek:
Quoted 1 line
Applied.
Quoted 8 lines
Quoted 3 lines
Where exactly on the board did you spot that regulator? I did not spot it on my pre-ordered board and wonder whether it might be a difference of the revised RS-distributed board with the large heat sink?
I didn't actually identify the physical device on the board, it's on sheet 16 of the schematic. The device is responsive to I2C and I'm reading back the settings I'm expecting from the hardware.
good that you have parallella hardware.
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140916/0f3659c6/attachment.sig>