AHCI maximum transfer size
Hi all,
I searched the list and the internet for this question, but I did not find a definitive answer.
I wonder what is the maximum AHCI transfer size for kernel 2.6.32.x
Let me explain: using a command as "dd if=/dev/zero of=/dev/sda bs=2M" I can see, via iostat, that request-size is at 2M (as expected). However it seems to me that the effective transfer size is way lower: disabling writeback cache on the target disk, I see very low performance even for big-chunk transfers.
Googling, I found this post on stackoverflow stating that maximum observerd AHCI transfer size (with a SATA protocol analyzer) is 128KB: http://stackoverflow.com/questions/24053662/how-to-enlarge-sata-transfer-size-in-linux-ahci-driver.
The stackoverflow post seems to agree with this old LWN.net article: http://lwn.net/Articles/77981/
Anyone has any idea of how to find (and eventually change) the used AHCI transfer size without touching the code?
NOTE: please CC me directly.
Regards.
Signature · 5 lines
Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: [email protected] - [email protected] GPG public key ID: FF5F32A8
Quoted 15 lines
Hi all,
I searched the list and the internet for this question, but I did not find a definitive answer.I wonder what is the maximum AHCI transfer size for kernel 2.6.32.x Let me explain: using a command as "dd if=/dev/zero of=/dev/sda bs=2M" I can see, via iostat, that request-size is at 2M (as expected). However it seems to me that the effective transfer size is way lower: disabling writeback cache on the target disk, I see very low performance even for big-chunk transfers.
Googling, I found this post on stackoverflow stating that maximum observerd AHCI transfer size (with a SATA protocol analyzer) is 128KB:
http://stackoverflow.com/questions/24053662/how-to-enlarge-sata-transfer-size-in-linux-ahci-driver.
Quoted 9 lines
The stackoverflow post seems to agree with this old LWN.net article:
http://lwn.net/Articles/77981/Anyone has any idea of how to find (and eventually change) the used AHCI transfer size without touching the code?
NOTE: please CC me directly.
Regards.
Hi all,
any idea on the subject?
Regards.
Signature · 5 lines
Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: [email protected] - [email protected] GPG public key ID: FF5F32A8
Quoted 22 lines · Gionatan Danti
Quoted 22 lines
Hi all,
I searched the list and the internet for this question, but I did not find a definitive answer.I wonder what is the maximum AHCI transfer size for kernel 2.6.32.x Let me explain: using a command as "dd if=/dev/zero of=/dev/sda bs=2M" I can see, via iostat, that request-size is at 2M (as expected). However it seems to me that the effective transfer size is way lower: disabling writeback cache on the target disk, I see very low performance even for big-chunk transfers.
Googling, I found this post on stackoverflow stating that maximum observerd AHCI transfer size (with a SATA protocol analyzer) is 128KB:
http://stackoverflow.com/questions/24053662/how-to-enlarge-sata-transfer-size-in-linux-ahci-driver.The stackoverflow post seems to agree with this old LWN.net article:
http://lwn.net/Articles/77981/Anyone has any idea of how to find (and eventually change) the used AHCI transfer size without touching the code?
Quoted 8 lines
Quoted 3 lines
NOTE: please CC me directly.
Regards.Hi all,
any idea on the subject?Regards.
Hi guys,
anyone with a suggestion?
Thank you.
Signature · 5 lines
Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: [email protected] - [email protected] GPG public key ID: FF5F32A8