usb: gadget: fastboot: improve download progress bar
A message that is not in the archive (sent off-list or not yet received): ABFEDD1A8D2AAF42A54E3C074D49DC729DB2AD9B@penmbx01
PATCH 1/1 usb: gadget: fastboot: improve download progress bar
Hi Marek,
Quoted 80 lines · Marek Vasut
Quoted 79 lines · Bo Shen
Hi Marek,
Quoted 75 lines · Marek Vasut
Quoted 69 lines · Bo Shen
Hi Marek,
Quoted 59 lines · Marek Vasut
On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:
+CC Lukasz, this is his turf.
Quoted 55 lines
When download is ongoing, if the actual size of one transfer is not the same as
BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.So, improve the method to show the progress bar (print dot).
Signed-off-by Bo Shen <[email protected]>---
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)(quoted diff) +0
-0
b/drivers/usb/gadget/f_fastboot.cindex 7a1acb9..2f13bf0 100644drivers/usb/gadget/f_fastboot.c +1
-0@@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static structf_fastboot *fastboot_func;static unsigned int download_size;static unsigned int download_bytes; +static unsigned int num_of_dot;static struct
usb_endpoint_descriptorfs_ep_in= {.bLength =
USB_DT_ENDPOINT_SIZE,drivers/usb/gadget/f_fastboot.c +2
-2@@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket; } -if (download_bytes && !(download_bytes %BYTES_PER_DOT )) { +if (download_bytes && ((download_bytes /BYTES_PER_DOT ) > num_of_dot)) { + num_of_dot = download_bytes /BYTES_PER_DOT ;putc ('.' ); -if (!(download_bytes % (74 *BYTES_PER_DOT ))) +if (!(num_of_dot %74 ))putc ('\n' ); } req->actual =0 ;@@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); download_size =simple_strtoul (cmd,NULL ,16 ); download_bytes =0 ;Quoted 6 lines
drivers/usb/gadget/f_fastboot.c static void cb_download(struct usb_ep *ep, · line 438
Quoted 1 line
drivers/usb/gadget/f_fastboot.c +1
-0+ num_of_dot =0 ;Make it a '
download_total' and log the total amount of bytes transferred please, that way it can be re-used for other purposes in the future ; for example for printing how much data were already transferred ;-)Quoted 2 lines
The
download_bytesrecord the total amount of bytes transferred. And thedownload_byteswill print after finishing transfer.So why can this not be used to indicate the total progress ? Because the transfeer speed is variating too much ?
Quoted 7 lines
Quoted 5 lines
As I described in the commit message. If the transfer length is not exactly the same as the request length, then the old method
"download_bytes%BYTES_PER_DOT"
won't be 0 anymore, so for the following transfer, it won't print dot anymore.And can you not reset the "
download_bytes" for each transfer ?
No, I don't reset the "download_bytes" for each transfer. It reset the "download_bytes" before transfer start.
The "download_bytes" is increase in rx_handler_dl_image function.
Quoted 1 line
Maybe we're not even aligned on what "transfer" means, so we might want to sync on this word first. What does "transfer" mean in this case?
Transfer I mean here is a usb request, which trying to transfer EP_BUFFER_SIZE at one time.
In my test case, sometime it transfer less than EP_BUFFER_SIZE in a usb request. So, it cause dot won't print the dot, and seems stuck. However, it will finish transfer after some time.
Best Regards,
Bo Shen
PATCH 1/1 usb: gadget: fastboot: improve download progress bar
Quoted 45 lines · Bo Shen
Hi Marek,
Quoted 42 lines · Marek Vasut
Quoted 41 lines · Bo Shen
Hi Marek,
Quoted 38 lines · Marek Vasut
Quoted 37 lines · Bo Shen
Hi Marek,
Quoted 34 lines · Marek Vasut
On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:
+CC Lukasz, this is his turf.
Quoted 30 lines
When download is ongoing, if the actual size of one transfer is not the same as
BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.So, improve the method to show the progress bar (print dot).
Signed-off-by Bo Shen <[email protected]>---
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)(quoted diff) +0
-0
b/drivers/usb/gadget/f_fastboot.cindex 7a1acb9..2f13bf0 100644drivers/usb/gadget/f_fastboot.c +1
-0@@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static structf_fastboot *fastboot_func;static unsigned int download_size;static unsigned int download_bytes; +static unsigned int num_of_dot;static struct
usb_endpoint_descriptorfs_ep_in= {.bLength =
USB_DT_ENDPOINT_SIZE,
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/gadget/f_fastboot.c +1
-1@@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket; } -if (download_bytes && !(download_bytes %BYTES_PER_DOT )) { + if (download_bytes && ((download_bytes / BYTES_PER_DOT) >
num_of_dot)) { +num_of_dot=download_bytes/
BYTES_PER_DOT;
Quoted 35 lines
Quoted 35 lines
Quoted 35 lines
Quoted 24 lines
Quoted 24 lines
Quoted 23 lines
Quoted 12 lines
putc('.');drivers/usb/gadget/f_fastboot.c +1
-1-if (!(download_bytes % (74 *BYTES_PER_DOT ))) +if (!(num_of_dot %74 ))putc ('\n' ); } req->actual =0 ;drivers/usb/gadget/f_fastboot.c static void cb_download(struct usb_ep *ep, · line 438
Quoted 6 lines
drivers/usb/gadget/f_fastboot.c +1
-0@@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); download_size =simple_strtoul (cmd,NULL ,16 ); download_bytes =0 ; + num_of_dot =0 ;Make it a '
download_total' and log the total amount of bytes transferred please, that way it can be re-used for other purposes in the future ; for example for printing how much data were already transferred ;-)Quoted 5 lines
Quoted 2 lines
The
download_bytesrecord the total amount of bytes transferred. And thedownload_byteswill print after finishing transfer.So why can this not be used to indicate the total progress ? Because the transfeer speed is variating too much ?
As I described in the commit message. If the transfer length is not exactly the same as the request length, then the old method
"
download_bytes%BYTES_PER_DOT"
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
won't be 0 anymore, so for the following transfer, it won't print dot anymore.
And can you not reset the "
download_bytes" for each transfer ?No, I don't reset the "
download_bytes" for each transfer. It reset the "download_bytes" before transfer start.
The "download_bytes" is increase inrx_handler_dl_imagefunction.
OK
Quoted 8 lines
Quoted 2 lines
Maybe we're not even aligned on what "transfer" means, so we might want to sync on this word first. What does "transfer" mean in this case?
Transfer I mean here is a usb request, which trying to transfer
EP_BUFFER_SIZEat one time.
In my test case, sometime it transfer less thanEP_BUFFER_SIZEin a usb request. So, it cause dot won't print the dot, and seems stuck. However, it will finish transfer after some time.
I see now. This code is really weird.
What would happen if the following condition is met in the code for k>0 ? (download_bytes == download_size) AND (download_bytes = k * BYTES_PER_DOT)
I think the original code would happily print a dot after printing this output:printf("\ndownloading of %d bytes finished\n", download_bytes);
Do you agree ? If yes, then I believe this code should go into the else branch only.
Also, you can probably avoid the counting variable if you do something like:
if (download_bytes / CONST != (download_bytes + transfer_size) / CONST) {
print(dot);
if (download_bytes / (74 * CONST) != ((download_bytes + transfer_size) /
(74 * CONST))
print(\n);
}Surely, the code can be simplified . You would also need to be careful about this assignment at the top of the function : download_bytes += transfer_size;
What do you think ?
PATCH 1/1 usb: gadget: fastboot: improve download progress bar
Hi Marek,
Quoted 110 lines · Marek Vasut
Quoted 45 lines · Bo Shen
Hi Marek,
Quoted 42 lines · Marek Vasut
Quoted 41 lines · Bo Shen
Hi Marek,
Quoted 38 lines · Marek Vasut
Quoted 37 lines · Bo Shen
Hi Marek,
Quoted 34 lines · Marek Vasut
On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:
+CC Lukasz, this is his turf.
Quoted 30 lines
When download is ongoing, if the actual size of one transfer is not the same as
BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.So, improve the method to show the progress bar (print dot).
Signed-off-by Bo Shen <[email protected]>---
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)(quoted diff) +0
-0
b/drivers/usb/gadget/f_fastboot.cindex 7a1acb9..2f13bf0 100644drivers/usb/gadget/f_fastboot.c +1
-0@@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static structf_fastboot *fastboot_func;static unsigned int download_size;static unsigned int download_bytes; +static unsigned int num_of_dot;static struct
usb_endpoint_descriptorfs_ep_in= {.bLength =
USB_DT_ENDPOINT_SIZE,Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/usb/gadget/f_fastboot.c +1
-1@@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket; } -if (download_bytes && !(download_bytes %BYTES_PER_DOT )) { + if (download_bytes && ((download_bytes / BYTES_PER_DOT) >
num_of_dot)) { +num_of_dot=download_bytes/
BYTES_PER_DOT;Quoted 35 lines
Quoted 35 lines
Quoted 35 lines
Quoted 24 lines
Quoted 24 lines
Quoted 23 lines
Quoted 12 lines
putc('.');drivers/usb/gadget/f_fastboot.c +1
-1-if (!(download_bytes % (74 *BYTES_PER_DOT ))) +if (!(num_of_dot %74 ))putc ('\n' ); } req->actual =0 ;drivers/usb/gadget/f_fastboot.c static void cb_download(struct usb_ep *ep, · line 438
Quoted 6 lines
drivers/usb/gadget/f_fastboot.c +1
-0@@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); download_size =simple_strtoul (cmd,NULL ,16 ); download_bytes =0 ; + num_of_dot =0 ;Make it a '
download_total' and log the total amount of bytes transferred please, that way it can be re-used for other purposes in the future ; for example for printing how much data were already transferred ;-)Quoted 5 lines
Quoted 2 lines
The
download_bytesrecord the total amount of bytes transferred. And thedownload_byteswill print after finishing transfer.So why can this not be used to indicate the total progress ? Because the transfeer speed is variating too much ?
As I described in the commit message. If the transfer length is not exactly the same as the request length, then the old method
"
download_bytes%BYTES_PER_DOT"Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
won't be 0 anymore, so for the following transfer, it won't print dot anymore.
And can you not reset the "
download_bytes" for each transfer ?No, I don't reset the "
download_bytes" for each transfer. It reset the "download_bytes" before transfer start.
The "download_bytes" is increase inrx_handler_dl_imagefunction.OK
Quoted 8 lines
Quoted 2 lines
Maybe we're not even aligned on what "transfer" means, so we might want to sync on this word first. What does "transfer" mean in this case?
Transfer I mean here is a usb request, which trying to transfer
EP_BUFFER_SIZEat one time.
In my test case, sometime it transfer less thanEP_BUFFER_SIZEin a usb request. So, it cause dot won't print the dot, and seems stuck. However, it will finish transfer after some time.
Quoted 4 lines
I see now. This code is really weird.
What would happen if the following condition is met in the code for k>0 ? (
download_bytes==download_size) AND (download_bytes= k *BYTES_PER_DOT)
I am not fully understand what you plan to present here.
Quoted 5 lines
I think the original code would happily print a dot after printing this output:
printf("\ndownloading of %d bytes finished\n", download_bytes);Do you agree ? If yes, then I believe this code should go into the else branch only.
Yes, I agree. This may happen, if the (download_bytes % BTYES_PER_DOT) equals to 0.
Quoted 9 lines
Also, you can probably avoid the counting variable if you do something like:
if (download_bytes / CONST != (download_bytes + transfer_size) / CONST) { print(dot); if (download_bytes / (74 * CONST) != ((download_bytes + transfer_size) / (74 * CONST)) print(\n); }
Quoted 5 lines
Surely, the code can be simplified . You would also need to be careful about this assignment at the top of the function :
download_bytes+=transfer_size;What do you think ?
I think this piece of code is better, which won't introduce new variable.
If no other comments, I will modify the code like this and send the v2 patch.
Best Regards,
Bo Shen
PATCH 1/1 usb: gadget: fastboot: improve download progress bar
Quoted 1 line · Bo Shen
Hi Marek,
[...]
Quoted 41 lines
Quoted 11 lines
Quoted 5 lines
Transfer I mean here is a usb request, which trying to transfer
EP_BUFFER_SIZEat one time.
In my test case, sometime it transfer less thanEP_BUFFER_SIZEin a usb request. So, it cause dot won't print the dot, and seems stuck. However, it will finish transfer after some time.I see now. This code is really weird.
What would happen if the following condition is met in the code for k>0 ? (
download_bytes==download_size) AND (download_bytes= k *BYTES_PER_DOT)I am not fully understand what you plan to present here.
Quoted 5 lines
I think the original code would happily print a dot after printing this
output:printf("\ndownloading of %d bytes finished\n", download_bytes);Do you agree ? If yes, then I believe this code should go into the else branch only.
Yes, I agree. This may happen, if the (
download_bytes%BTYES_PER_DOT) equals to 0.Quoted 18 lines
Also, you can probably avoid the counting variable if you do something like:
if (
download_bytes/ CONST != (download_bytes+transfer_size) / CONST) {print(dot); if (download_bytes / (74 * CONST) != ((download_bytes + transfer_size) /(74 * CONST))
print(\n);}
Surely, the code can be simplified . You would also need to be careful about this assignment at the top of the function :
download_bytes+=transfer_size;
Quoted 6 lines
Quoted 1 line
What do you think ?
I think this piece of code is better, which won't introduce new variable.
If no other comments, I will modify the code like this and send the v2 patch.
Well OK then. Thanks!