bcma: register bcma as device tree driver
Subsystems (2)
PATCH v3 1/2 bcma: register bcma as device tree driver
This driver is used by the bcm53xx ARM SoC code. Now it is possible to give the address of the chipcommon core in device tree and bcma will search for all the other cores.
--- Documentation/devicetree/bindings/bus/bcma.txt | 39 ++++++++++++ drivers/bcma/bcma_private.h | 14 +++++ drivers/bcma/host_soc.c | 82 ++++++++++++++++++++++++++ drivers/bcma/main.c | 6 ++ include/linux/bcma/bcma.h | 2 + 5 files changed, 143 insertions(+) create mode 100644 Documentation/devicetree/bindings/bus/bcma.txt
This is based on wireless-testing and should go into that tree.
changes since:
v2:
- fix description
- use ranges dt in the example
- always define a empty implementation of bcma_host_soc_{un}register_driver() when it is build and remove some ifdefs
v1:
- renamed aix to axi
RFC:
- reworded the irq description
- improved the example
- hocked into bcma_modeinit() and bcma_modexit()
Documentation/devicetree/bindings/bus/bcma.txt new file +39 -0
@@ -0,0 +1,39 @@ +Driver for ARM AXI Bus with Broadcom Plugins (bcma) + +Required properties: + +- compatible : brcm,bus-axi + +- reg : iomem address range of chipcommon core + +The cores on the AXI bus are automatically detected by bcma with the +memory ranges they are using and they get registered afterwards. +Automatic detection of the IRQ number is not reliable on +BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide +them manually through device tree. The IRQ number and the device tree +child entry will get assigned to the core with the matching reg address. + +Example: + + axi at 18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + pcie at 12000 { + reg = <0x00012000 0x1000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; + + ethernet at 24000 { + reg = <0x00024000 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + }; + + ethernet at 25000 { + reg = <0x00025000 0x1000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + }; + };
drivers/bcma/bcma_private.h +14 -0
@@ -88,6 +88,20 @@ extern int __init bcma_host_pci_init(void); extern void __exit bcma_host_pci_exit(void);#endif /* CONFIG_BCMA_HOST_PCI */ +/* host_soc.c */ +#if defined(CONFIG_BCMA_HOST_SOC ) && defined(CONFIG_OF ) +extern int __init bcma_host_soc_register_driver (void ); +extern void __exit bcma_host_soc_unregister_driver(void); +#else +static inline int __init bcma_host_soc_register_driver (void ) +{ +return 0 ; +} +static inline void __exit bcma_host_soc_unregister_driver(void) +{ +} +#endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */ +/* driver_pci.c */ u32 bcma_pcie_read (struct bcma_drv_pci *pc,u32 address);
drivers/bcma/host_soc.c +82 -0
97 lines not on this page · raw message
drivers/bcma/main.c +6 -0
@@ -528,6 +528,11 @@ static int __init bcma_modinit(void)if (err)return err; + err =bcma_host_soc_register_driver (); +if (err) { +pr_err ("SoC host initialization failed\n" ); + err =0 ; + }#ifdef CONFIG_BCMA_HOST_PCI err =bcma_host_pci_init ();if (err) {
@@ -545,6 +550,7 @@ static void __exit bcma_modexit(void)#ifdef CONFIG_BCMA_HOST_PCI bcma_host_pci_exit ();#endif +bcma_host_soc_unregister_driver ();bus_unregister (&bcma_bus_type); }module_exit (bcma_modexit)
include/linux/bcma/bcma.h +2 -0
@@ -323,6 +323,8 @@ struct bcma_bus {struct pci_dev *host_pci;/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */ struct sdio_func *host_sdio; +/* Pointer to platform device (only for BCMA_HOSTTYPE_SOC) */ +struct platform_device *host_pdev; };struct bcma_chipinfo chipinfo;
Signature · 1 line
1.9.1
PATCH v3 2/2 bcma: get IRQ numbers from dt
It is not possible to auto detect the irq numbers used by the cores on an arm SoC. If bcma was registered with device tree it will search for some device tree nodes with the irq number and add it to the core configuration.
--- drivers/bcma/main.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 48 insertions(+), 1 deletion(-)
This is based on wireless-testing and should go into that tree.
changes since:
v2:
- use of_translate_address() to support ranges
RFC:
- add #ifdef CONFIG_OF
drivers/bcma/main.c +48 -1
@@ -10,6 +10,8 @@#include <linux/platform_device.h> #include <linux/bcma/bcma.h> #include <linux/slab.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> MODULE_DESCRIPTION ("Broadcom's specific AMBA driver" );MODULE_LICENSE ("GPL" );
@@ -131,6 +133,45 @@ static bool bcma_is_core_needed_early(u16 core_id)return false; } +#ifdef CONFIG_OF +static struct device_node *bcma_of_find_child_device (struct platform_device *parent, +struct bcma_device *core) +{ +struct device_node *node; +u64 size; +const __be32 *reg; + +if (!parent || !parent->dev.of_node) +return NULL ; + +for_each_child_of_node (parent->dev.of_node, node) { + reg =of_get_address (node,0 , &size,NULL ); +if (!reg) +continue ; +if (of_translate_address (node, reg) == core->addr) +return node; + } +return NULL ; +} + +static void bcma_of_fill_device (struct platform_device *parent, +struct bcma_device *core) +{ +struct device_node *node; + + node =bcma_of_find_child_device (parent, core); +if (!node) +return ; + core->dev.of_node = node; + core->irq =irq_of_parse_and_map (node,0 ); +} +#else +static void bcma_of_fill_device (struct platform_device *parent, +struct bcma_device *core) +{ +} +#endif /* CONFIG_OF */ +static void bcma_register_core (struct bcma_bus *bus,struct bcma_device *core) {int err;
@@ -147,7 +188,13 @@ static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)break ;case BCMA_HOSTTYPE_SOC : core->dev.dma_mask = &core->dev.coherent_dma_mask; - core->dma_dev = &core->dev; +if (bus->host_pdev) { + core->dma_dev = &bus->host_pdev->dev; + core->dev.parent = &bus->host_pdev->dev; +bcma_of_fill_device (bus->host_pdev, core); + }else { + core->dma_dev = &core->dev; + }break ;case BCMA_HOSTTYPE_SDIO :break ;
Signature · 1 line
1.9.1
Rafał Miłecki
maintainerPATCH v3 1/2 bcma: register bcma as device tree driver
In reply to Hauke MehrtensQuoted 3 lines · Hauke Mehrtens
This driver is used by the bcm53xx ARM SoC code. Now it is possible to give the address of the chipcommon core in device tree and bcma will search for all the other cores.
Looks fine, thanks!
PATCH v3 1/2 bcma: register bcma as device tree driver
In reply to Hauke MehrtensQuoted 3 lines · Hauke Mehrtens
This driver is used by the bcm53xx ARM SoC code. Now it is possible to give the address of the chipcommon core in device tree and bcma will search for all the other cores.
(...)
drivers/bcma/host_soc.c int __init bcma_host_soc_init(struct bcma_soc *soc) · line 263
Quoted 11 lines
drivers/bcma/host_soc.c +11
-0+ +static const struct of_device_id bcma_host_soc_of_match[] = { + { .compatible ="brcm,bus-axi" , }, + {}, +}; +MODULE_DEVICE_TABLE (of, bcma_host_soc_of_match); + +static struct platform_driver bcma_host_soc_driver = { + .driver = { + .name ="bcma-host-soc" , + .owner =THIS_MODULE ,
This field updated automatically...
Quoted 6 lines
drivers/bcma/host_soc.c +6
-0+ .of_match_table = bcma_host_soc_of_match, + }, + .probe = bcma_host_soc_probe, + .remove = bcma_host_soc_remove, +}; +
drivers/bcma/host_soc.c int __init bcma_host_soc_init(struct bcma_soc *soc) · line 279
Quoted 10 lines
drivers/bcma/host_soc.c +10
-0+int __init bcma_host_soc_register_driver (void ) +{ +return platform_driver_register (&bcma_host_soc_driver); +} + +void __exit bcma_host_soc_unregister_driver(void) +{ +platform_driver_unregister (&bcma_host_soc_driver); +} +#endif /* CONFIG_OF */
Why dont you use module_platform_driver(...)...?
Signature · 2 lines
Regards, Varka Bhadram.
PATCH v3 1/2 bcma: register bcma as device tree driver
Quoted 7 lines · Varka Bhadram
Quoted 3 lines · Hauke Mehrtens
This driver is used by the bcm53xx ARM SoC code. Now it is possible to give the address of the chipcommon core in device tree and bcma will search for all the other cores.
(...)
Quoted 13 lines
drivers/bcma/host_soc.c int __init bcma_host_soc_init(struct bcma_soc *soc) · line 263
Quoted 11 lines
drivers/bcma/host_soc.c +11
-0+ +static const struct of_device_id bcma_host_soc_of_match[] = { + { .compatible ="brcm,bus-axi" , }, + {}, +}; +MODULE_DEVICE_TABLE (of, bcma_host_soc_of_match); + +static struct platform_driver bcma_host_soc_driver = { + .driver = { + .name ="bcma-host-soc" , + .owner =THIS_MODULE ,This field updated automatically...
Ok, I will remove this line.
Quoted 10 lines
Quoted 10 lines
drivers/bcma/host_soc.c +10
-0+ .of_match_table = bcma_host_soc_of_match, + }, + .probe = bcma_host_soc_probe, + .remove = bcma_host_soc_remove, +}; + +int __init bcma_host_soc_register_driver (void ) +{ +return platform_driver_register (&bcma_host_soc_driver); +}
Quoted 8 lines
drivers/bcma/host_soc.c int __init bcma_host_soc_init(struct bcma_soc *soc) · line 279
Quoted 6 lines
drivers/bcma/host_soc.c +6
-0+ +void __exit bcma_host_soc_unregister_driver(void) +{ +platform_driver_unregister (&bcma_host_soc_driver); +} +#endif /* CONFIG_OF */ Why dont you use
module_platform_driver(...)...?
module_platform_driver() does not work, because we can only have one module_init() method in a module and main.c already has one. This driver can also be registered as an PCI device.
Hauke
PATCH v3 1/2 bcma: register bcma as device tree driver
Quoted 38 lines · Hauke Mehrtens
Quoted 6 lines · Varka Bhadram
Quoted 3 lines · Hauke Mehrtens
This driver is used by the bcm53xx ARM SoC code. Now it is possible to give the address of the chipcommon core in device tree and bcma will search for all the other cores.
(...)
Quoted 12 lines
drivers/bcma/host_soc.c int __init bcma_host_soc_init(struct bcma_soc *soc) · line 263
Quoted 11 lines
drivers/bcma/host_soc.c +11
-0+ +static const struct of_device_id bcma_host_soc_of_match[] = { + { .compatible ="brcm,bus-axi" , }, + {}, +}; +MODULE_DEVICE_TABLE (of, bcma_host_soc_of_match); + +static struct platform_driver bcma_host_soc_driver = { + .driver = { + .name ="bcma-host-soc" , + .owner =THIS_MODULE ,This field updated automatically...
Ok, I will remove this line.
Quoted 9 lines
Quoted 9 lines
drivers/bcma/host_soc.c +9
-0+ .of_match_table = bcma_host_soc_of_match, + }, + .probe = bcma_host_soc_probe, + .remove = bcma_host_soc_remove, +}; + +int __init bcma_host_soc_register_driver (void ) +{ +return platform_driver_register (&bcma_host_soc_driver);Quoted 8 lines
drivers/bcma/host_soc.c int __init bcma_host_soc_init(struct bcma_soc *soc) · line 279
Quoted 7 lines
drivers/bcma/host_soc.c +7
-0+} + +void __exit bcma_host_soc_unregister_driver(void) +{ +platform_driver_unregister (&bcma_host_soc_driver); +} +#endif /* CONFIG_OF */ Why dont you use
module_platform_driver(...)...?
Quoted 3 lines
module_platform_driver()does not work, because we can only have onemodule_init()method in a module andmain.calready has one. This driver can also be registered as an PCI device.
Ok.. thanks
Signature · 1 line
-Varka Bhadram