Skip to contentSkip to conversation

i.MX6 SABRESD improvements (using a Freescale kernel)

PATCH Superseded Luca Ceresoli 2 participants 4 messages Sep 24, 2014 – Sep 25, 2014 Arm i.MX and Layerscape

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover i.MX6 SABRESD improvements (using a Freescale kernel)

Hi,

here are 2 little improvements to the i.MX6 SABRESD board support in Buildroot, both suggested by Thomas Petazzoni in [1].

This differs from the patchest I sent earlier today [2] in the kernel origin:
keep using git.freescale.com instead of switching to a mainline kernel, as per the discussion in [2].

Nothing huge, just see the changelog below.

Built and run on an i.MX6DL SABRESD board.

Vincent, it would be nice if you could test it on a Quad-based board.

Luca Ceresoli (2):
freescale/imx6-sabresd: use global patch dir for U-Boot patches freescale/imx6-sabresd: lock down kernel headers to the kernel version

 ...01-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch | 0
 configs/freescale_imx6dlsabresd_defconfig                        | 9 ++++++++-
 configs/freescale_imx6qsabresd_defconfig                         | 9 ++++++++-
 3 files changed, 16 insertions(+), 2 deletions(-)
 rename board/freescale/imx6sabresd/{ => patches/uboot}/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch (100%)

[1] http://lists.busybox.net/pipermail/buildroot/2014-September/106704.html
[2] http://lists.busybox.net/pipermail/buildroot/2014-September/106972.html

Signature · 4 lines
Luca

-- 
1.9.1
#1 lore raw

PATCH 1/2 freescale/imx6-sabresd: use global patch dir for U-Boot patches

The best practice is to use the BR2_GLOBAL_PATCH_DIR for patches against U-Boot, not BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR.

Cc Vincent Stehl? <[email protected]>
Cc Gilles Talis <[email protected]>
Cc Gary Bisson <[email protected]>
Cc Thomas Petazzoni <[email protected]>
---
 ...ot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch | 0
 configs/freescale_imx6dlsabresd_defconfig                             | 4 +++-
 configs/freescale_imx6qsabresd_defconfig                              | 4 +++-
 3 files changed, 6 insertions(+), 2 deletions(-)
 rename board/freescale/imx6sabresd/{ => patches/uboot}/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch (100%)
board/freescale/imx6sabresd/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch renamed from board/freescale/imx6sabresd/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch +0 -0
similarity index 100%
rename from board/freescale/imx6sabresd/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
rename to board/freescale/imx6sabresd/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
configs/freescale_imx6dlsabresd_defconfig +3 -1
index 62caf79..b8c4b22 100644
@@ -2,6 +2,9 @@
 BR2_arm=y
 BR2_cortex_a9=y
 
+# patches
+BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabresd/patches"
+
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 
@@ -25,4 +28,3 @@ BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
 BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
-BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/freescale/imx6sabresd"
configs/freescale_imx6qsabresd_defconfig +3 -1
index bc0aa46..40a9384 100644
@@ -2,6 +2,9 @@
 BR2_arm=y
 BR2_cortex_a9=y
 
+# patches
+BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabresd/patches"
+
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 
@@ -25,4 +28,3 @@ BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
 BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
-BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/freescale/imx6sabresd"
Signature · 1 line
1.9.1
#2 lore raw

PATCH 2/2 freescale/imx6-sabresd: lock down kernel headers to the kernel version

In reply to Luca Ceresoli

The current defconfigs for iMX6 SABRESD kernel 3.10.17 from the Freescale git repository. This kernel is older than the toolchain kernel headers used in Buildroot (currently 3.16.3).

Explicitly lock down the kernel headers to match the version of the kernel that is built.

Cc Vincent Stehl? <[email protected]>
Cc Gilles Talis <[email protected]>
Cc Gary Bisson <[email protected]>
Cc Thomas Petazzoni <[email protected]>
---
 configs/freescale_imx6dlsabresd_defconfig | 5 +++++
 configs/freescale_imx6qsabresd_defconfig  | 5 +++++
 2 files changed, 10 insertions(+)
configs/freescale_imx6dlsabresd_defconfig +5 -0
index b8c4b22..680031d 100644
@@ -5,6 +5,11 @@ BR2_cortex_a9=y
 # patches
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabresd/patches"
 
+# toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.10.17"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
+
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 
configs/freescale_imx6qsabresd_defconfig +5 -0
index 40a9384..f2f702e 100644
@@ -5,6 +5,11 @@ BR2_cortex_a9=y
 # patches
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabresd/patches"
 
+# toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.10.17"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
+
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 
Signature · 1 line
1.9.1
#3 lore raw

cover i.MX6 SABRESD improvements (using a Freescale kernel)

In reply to Luca Ceresoli

On 09/24/2014 06:14 PM, Luca Ceresoli wrote:
..

Quoted 1 line

Vincent, it would be nice if you could test it on a Quad-based board.

Hi Luca,

I applied your two patches on top of 7989e05327903. I can build freescale_imx6qsabresd_defconfig and run on a Sabre SD Quad with no issue.

Best regards,

V.