Skip to contentSkip to conversation

sun7i: Add support for Olimex A20-OLinuXino-LIME2

PATCH New Iain Paton 2 participants 2 messages Sep 28, 2014 Arm/Allwinner sunXi SoC support

lore
Share & tools
lore

Iain Paton

author
#0 lore raw

PATCH 1/1 sun7i: Add support for Olimex A20-OLinuXino-LIME2

This adds support for the Olimex A20-OLinuXino-Lime2
https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2

Differences to previous Lime boards are 1GB RAM and gigabit ethernet

---

patch is substantially the same as the one previously posted to linux-sunxi by HeHoPMaJIeH <[email protected]> just updated for mainline. The settings have been tested on real hardware, however I'm limited to the two boards that I have. As yet there are no downloads available from Olimex for this board, so it's unknown if they will go for a more conservative setting.

 board/sunxi/MAINTAINERS               |  6 ++++++
 board/sunxi/Makefile                  |  1 +
 board/sunxi/dram_a20_olinuxino_l2.c   | 31 +++++++++++++++++++++++++++++++
 configs/A20-OLinuXino-Lime2_defconfig |  5 +++++
 4 files changed, 43 insertions(+)
 create mode 100644 board/sunxi/dram_a20_olinuxino_l2.c
 create mode 100644 configs/A20-OLinuXino-Lime2_defconfig
board/sunxi/MAINTAINERS +6 -0
index 4f32195..4ed82cf 100644
@@ -38,3 +38,9 @@ M:	FUKAUMI Naoki <[email protected]>
 S:	Maintained
 F:	board/sunxi/dram_a20_olinuxino_l.c
 F:	configs/A20-OLinuXino-Lime_defconfig
+
+A20-OLINUXINO-LIME2 BOARD
+M:	Iain Paton <[email protected]>
+S:	Maintained
+F:	board/sunxi/dram_a20_olinuxino_l2.c
+F:	configs/A20-OLinuXino-Lime2_defconfig
board/sunxi/Makefile +1 -0
index 56073a0..d63a6d2 100644
@@ -16,6 +16,7 @@ obj-$(CONFIG_A10S_OLINUXINO_M)	+= dram_a10s_olinuxino_m.o
 obj-$(CONFIG_A13_OLINUXINO)	+= dram_a13_olinuxino.o
 obj-$(CONFIG_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
 obj-$(CONFIG_A20_OLINUXINO_L)	+= dram_a20_olinuxino_l.o
+obj-$(CONFIG_A20_OLINUXINO_L2)	+= dram_a20_olinuxino_l2.o
 obj-$(CONFIG_A20_OLINUXINO_M)	+= dram_sun7i_384_1024_iow16.o
 # This is not a typo, uses the same mem settings as the a10s-olinuxino-m
 obj-$(CONFIG_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
board/sunxi/dram_a20_olinuxino_l2.c new file +31 -0
new file mode 100644
index 0000000..2115d37
@@ -0,0 +1,31 @@
+/* this file is generated, don't edit it yourself */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+
+static struct dram_para dram_para = {
+	.clock = 480,
+	.type = 3,
+	.rank_num = 1,
+	.density = 4096,
+	.io_width = 16,
+	.bus_width = 32,
+	.cas = 9,
+	.zq = 0x7f,
+	.odt_en = 0,
+	.size = 1024,
+	.tpr0 = 0x42d899b7,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.tpr3 = 0,
+	.tpr4 = 0,
+	.tpr5 = 0,
+	.emr1 = 0x4,
+	.emr2 = 0x10,
+	.emr3 = 0,
+};
+
+unsigned long sunxi_dram_init(void)
+{
+	return dramc_init(&dram_para);
+}
configs/A20-OLinuXino-Lime2_defconfig new file +5 -0
new file mode 100644
index 0000000..75ef872
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L2,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SUN7I=y
Signature · 1 line
1.8.5.1
#1 lore raw

PATCH 1/1 sun7i: Add support for Olimex A20-OLinuXino-LIME2

Hi,

Quoted 6 lines · Iain Paton

This adds support for the Olimex A20-OLinuXino-Lime2
https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2

Differences to previous Lime boards are 1GB RAM and gigabit ethernet

Thanks, I've added this to the u-boot-sunxi next tree:

http://git.denx.de/?p=u-boot/u-boot-sunxi.git;a=shortlog;h=refs/heads/next

I plan to include it in the next pull-req for v2014.10 .

Regards,

Hans

Quoted 92 lines

---

patch is substantially the same as the one previously posted to linux-sunxi by HeHoPMaJIeH <[email protected]> just updated for mainline. The settings have been tested on real hardware, however I'm limited to the two boards that I have. As yet there are no downloads available from Olimex for this board, so it's unknown if they will go for a more conservative setting.

 board/sunxi/MAINTAINERS               |  6 ++++++
 board/sunxi/Makefile                  |  1 +
 board/sunxi/dram_a20_olinuxino_l2.c   | 31 +++++++++++++++++++++++++++++++
 configs/A20-OLinuXino-Lime2_defconfig |  5 +++++
 4 files changed, 43 insertions(+)
 create mode 100644 board/sunxi/dram_a20_olinuxino_l2.c
 create mode 100644 configs/A20-OLinuXino-Lime2_defconfig
board/sunxi/MAINTAINERS +6 -0
index 4f32195..4ed82cf 100644
@@ -38,3 +38,9 @@ M:	FUKAUMI Naoki <[email protected]>
 S:	Maintained
 F:	board/sunxi/dram_a20_olinuxino_l.c
 F:	configs/A20-OLinuXino-Lime_defconfig
+
+A20-OLINUXINO-LIME2 BOARD
+M:	Iain Paton <[email protected]>
+S:	Maintained
+F:	board/sunxi/dram_a20_olinuxino_l2.c
+F:	configs/A20-OLinuXino-Lime2_defconfig
board/sunxi/Makefile +1 -0
index 56073a0..d63a6d2 100644
@@ -16,6 +16,7 @@ obj-$(CONFIG_A10S_OLINUXINO_M)	+= dram_a10s_olinuxino_m.o
 obj-$(CONFIG_A13_OLINUXINO)	+= dram_a13_olinuxino.o
 obj-$(CONFIG_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
 obj-$(CONFIG_A20_OLINUXINO_L)	+= dram_a20_olinuxino_l.o
+obj-$(CONFIG_A20_OLINUXINO_L2)	+= dram_a20_olinuxino_l2.o
 obj-$(CONFIG_A20_OLINUXINO_M)	+= dram_sun7i_384_1024_iow16.o
 # This is not a typo, uses the same mem settings as the a10s-olinuxino-m
 obj-$(CONFIG_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
board/sunxi/dram_a20_olinuxino_l2.c new file +31 -0
new file mode 100644
index 0000000..2115d37
@@ -0,0 +1,31 @@
+/* this file is generated, don't edit it yourself */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+
+static struct dram_para dram_para = {
+	.clock = 480,
+	.type = 3,
+	.rank_num = 1,
+	.density = 4096,
+	.io_width = 16,
+	.bus_width = 32,
+	.cas = 9,
+	.zq = 0x7f,
+	.odt_en = 0,
+	.size = 1024,
+	.tpr0 = 0x42d899b7,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.tpr3 = 0,
+	.tpr4 = 0,
+	.tpr5 = 0,
+	.emr1 = 0x4,
+	.emr2 = 0x10,
+	.emr3 = 0,
+};
+
+unsigned long sunxi_dram_init(void)
+{
+	return dramc_init(&dram_para);
+}
configs/A20-OLinuXino-Lime2_defconfig new file +5 -0
new file mode 100644
index 0000000..75ef872
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L2,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SUN7I=y