ARM: dts: Add initial DTS file for Sony Xperia Z1 phone
Subsystems (3)
PATCH v3 1/1 ARM: dts: Add initial DTS file for Sony Xperia Z1 phone
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console.
changes from V2
- fixed dtb name in Makefile
changes from v1
- removed qcom,msm-id attribute
- removed mis-capitalized Qualcomm word
- changed dts file name
- added board-specific compatible-string
---
This version fixes the dtb name. I asked previously about adding to qcom_dt_match, but apparently board compatibles are being removed from that list in mach_qcom/board.c
See https://lkml.org/lkml/2014/9/24/952
Kevin tested this (modulu re-adding back the qcom,msm-id). I have a new mkqcdtbootimg which works without requiring the qcom,msm-id attribute, that I'll send to Kevin shortly (and publish on github).
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 3 ++- arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 17 +++++++++++++++++ 3 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
@@ -128,6 +128,7 @@ sirf SiRF Technology, Inc. smsc Standard Microsystems Corporation snps Synopsys, Inc. solidrun SolidRun +sony Sony Corporation spansion Spansion Inc. st STMicroelectronics ste ST-Ericsson
arch/arm/boot/dts/Makefile +2 -1
@@ -343,7 +343,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-mtp.dtb \ qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3188-radxarock.dtb \
arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts new file +17 -0
@@ -0,0 +1,17 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; + + memory at 0 { + reg = <0 0x40000000>, <0x40000000 0x40000000>; + device_type = "memory"; + }; +}; + +&soc { + serial at f991e000 { + status = "ok"; + }; +};
Signature · 1 line
1.8.2.2
A message that is not in the archive (sent off-list or not yet received): CA+bK7J5x60WyyAp6+hGDf-fyAC=skQu9EdPUabPrzhMCDnOCrA@mail.gmail.com
Will not make the 3.18 merge window. I will queue it up for 3.19.
- k
Quoted 90 lines · Tim Bird
Kumar,
Any chance this could make the 3.18 merge window? Have you had time to take a look at it?
-- TimOn Tue, Sep 30, 2014 at 3:49 PM, Tim Bird <[email protected]> wrote:
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console.changes from V2
- fixed dtb name inMakefilechanges from v1
- removed qcom,msm-id attribute
- removed mis-capitalized Qualcomm word
- changed dts file name
- added board-specific compatible-stringSigned-off-by Tim Bird <[email protected]>Tested-by Kevin Hilman <[email protected]>---
This version fixes the dtb name. I asked previously about adding to
qcom_dt_match, but apparently board compatibles are being removed from that list inmach_qcom/board.c
See https://lkml.org/lkml/2014/9/24/952Kevin tested this (modulu re-adding back the qcom,msm-id). I have a new mkqcdtbootimg which works without requiring the qcom,msm-id attribute, that I'll send to Kevin shortly (and publish on github).
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 3 ++- arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 17 +++++++++++++++++ 3 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dtsDocumentation/devicetree/bindings/vendor-prefixes.txt +1
-0@@ -128,6 +128,7 @@ sirf SiRF Technology, Inc. smsc Standard Microsystems Corporation snps Synopsys, Inc. solidrun SolidRun +sony Sony Corporation spansion Spansion Inc. st STMicroelectronics ste ST-Ericssonarch/arm/boot/dts/Makefile +2
-1@@ -343,7 +343,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-mtp.dtb \ qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3188-radxarock.dtb \arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts new file +17
-1@@ -0,0 +1,17 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; + + memory at 0 { + reg = <0 0x40000000>, <0x40000000 0x40000000>; + device_type = "memory"; + }; +}; + +&soc { + serial at f991e000 { + status = "ok"; + }; +}; --1.8.2.2
Signature · 3 lines
Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Hi Kumar,
Quoted 1 line · Kumar Gala
Will not make the 3.18 merge window. I will queue it up for 3.19.
Yes, it's too late for the merge window proper, but since it's DT only support for new platform, you can submit it as a fix to us (arm-soc) for v3.18-rc.
In fact, if you chose (and if it's known to work for v3.17 and/or earlier), you can even mark it for stable. Greg has said he's OK with DT-only changes like this that only affect a specific platform to go into stable.
Kevin