iMX6 Device Tree: status of CONFIG_OF_CONTROL
Hi,
I'm about to start the porting of U-Boot on a custom board based on iMX6 (close to SabreSD).
My questions are:
1) should I use device tree or use the "old" way (cloning directory and make modifications)?
2) How is the status of CONFIG_OF_CONTROL on u-boot in general (and in particular on iMX6)?
Thank you
Regards
Luca
----
Luca Ellero
http://www.brickedbrain.com
Hi Luca,
Quoted 6 lines · Luca Ellero
Hi,
I'm about to start the porting of U-Boot on a custom board based on iMX6 (close to SabreSD).
My questions are:
1) should I use device tree or use the "old" way (cloning directory and make modifications)?
For now, it's better to use the board file way. We are currently not at the point to provide a dts to fully describe the hardware in U-boot for imx.
Hi Fabio,
thanks your suggestion.
Regards
Luca
Quoted 13 lines · Fabio Estevam
Hi Luca,
Quoted 6 lines · Luca Ellero
Hi,
I'm about to start the porting of U-Boot on a custom board based on iMX6 (close to SabreSD).
My questions are:
1) should I use device tree or use the "old" way (cloning directory and make modifications)?For now, it's better to use the board file way. We are currently not at the point to provide a dts to fully describe the hardware in U-boot for imx.