rtc/tpo: Driver to support rtc and wakeup on PowerNV platform
Subsystems (3)
PATCH v2 1/1 rtc/tpo: Driver to support rtc and wakeup on PowerNV platform
The patch implements the OPAL rtc driver that binds with the rtc driver subsystem. The driver uses the platform device infrastructure to probe the rtc device and register it to rtc class framework. The 'wakeup' is supported depending upon the property 'has-tpo' present in the OF node. It provides a way to load the generic rtc driver in in the absence of an OPAL driver.
The patch also moves the existing OPAL rtc get/set time interfaces to the new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL.
Test results:
-------------
Host:
[root@tul163p1 ~]# ls -l /sys/class/rtc/
total 0
lrwxrwxrwx 1 root root 0 Sep 30 04:58 rtc0 -> ../../devices/opal-rtc/rtc/rtc0 [root@tul163p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time
10:01:51
[root@tul163p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time
10:02:07
[root@tul163p1 ~]# echo date '+%s' -d '+ 3 minutes' > /sys/class/rtc/rtc0/wakealarm [root@tul163p1 ~]# cat /sys/class/rtc/rtc0/wakealarm
1412071532
[root@tul163p1 ~]#
FSP:
$ smgr mfgState standby $ smgr mfgState ipling $
---
Changes in v2
=============
- Added Documentation/devicetree/bindings/rtc/rtc-opal.txt
- Explicitly turn off RTC_UIE mode by setting 'rtc->uie_unsupported'
Dependency
==========
This patch depends upon the below patch posted on 'linuxppc-dev-uLR06cmDAlY/[email protected]' [PATCH 1/4] powerpc/powernv: Add OPAL check token call
Documentation/devicetree/bindings/rtc/rtc-opal.txt | 16 + arch/powerpc/include/asm/opal.h | 7 - arch/powerpc/kernel/time.c | 1 arch/powerpc/platforms/powernv/opal-async.c | 3 arch/powerpc/platforms/powernv/opal-rtc.c | 63 +---- arch/powerpc/platforms/powernv/opal-wrappers.S | 2 arch/powerpc/platforms/powernv/opal.c | 6 arch/powerpc/platforms/powernv/setup.c | 2 drivers/rtc/Kconfig | 11 + drivers/rtc/Makefile | 1 drivers/rtc/rtc-opal.c | 261 ++++++++++++++++++++ 11 files changed, 325 insertions(+), 48 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/rtc-opal.txt create mode 100644 drivers/rtc/rtc-opal.c
Documentation/devicetree/bindings/rtc/rtc-opal.txt new file +16 -0
@@ -0,0 +1,16 @@ +IBM OPAL real-time clock +------------------------ + +Required properties: +- comapatible: Should be "ibm,opal-rtc" + +Optional properties: +- has-tpo: Decides if the wakeup is supported or not. + +Example: + rtc { + compatible = "ibm,opal-rtc"; + has-tpo; + phandle = <0x10000029>; + linux,phandle = <0x10000029>; + };
arch/powerpc/include/asm/opal.h +5 -2
@@ -152,6 +152,8 @@ struct opal_sg_list {#define OPAL_HANDLE_HMI 98#define OPAL_REGISTER_DUMP_REGION 101#define OPAL_UNREGISTER_DUMP_REGION 102 +#define OPAL_WRITE_TPO 103 +#define OPAL_READ_TPO 104#ifndef __ASSEMBLY__
@@ -790,6 +792,9 @@ int64_t opal_rtc_read(__be32 *year_month_day, __be64 *hour_minute_second_millisecond);int64_t opal_rtc_write (uint32_t year_month_day,uint64_t hour_minute_second_millisecond); +int64_t opal_tpo_read (uint64_t token,__be32 *year_mon_day,__be32 *hour_min); +int64_t opal_tpo_write (uint64_t token,uint32_t year_mon_day, +uint32_t hour_min);int64_t opal_cec_power_down (uint64_t request);int64_t opal_cec_reboot (void );int64_t opal_read_nvram (uint64_t buffer,uint64_t size,uint64_t offset);
@@ -960,8 +965,6 @@ extern int opal_async_wait_response(uint64_t token, struct opal_msg *msg);extern int opal_get_sensor_data (u32 sensor_hndl,u32 *sensor_data);struct rtc_time ; -extern int opal_set_rtc_time (struct rtc_time *tm); -extern void opal_get_rtc_time (struct rtc_time *tm);extern unsigned long opal_get_boot_time (void );extern void opal_nvram_init (void );extern void opal_flash_init (void );
arch/powerpc/kernel/time.c +1 -0
@@ -989,6 +989,7 @@ void GregorianDay(struct rtc_time * tm) tm->tm_wday = day %7 ; } +EXPORT_SYMBOL_GPL (GregorianDay);void to_tm (int tim,struct rtc_time * tm) {
arch/powerpc/platforms/powernv/opal-async.c +3 -0
@@ -71,6 +71,7 @@ int opal_async_get_token_interruptible(void)return token; } +EXPORT_SYMBOL_GPL (opal_async_get_token_interruptible);int __opal_async_release_token (int token) {
@@ -102,6 +103,7 @@ int opal_async_release_token(int token)return 0 ; } +EXPORT_SYMBOL_GPL (opal_async_release_token);int opal_async_wait_response (uint64_t token,struct opal_msg *msg) {
@@ -120,6 +122,7 @@ int opal_async_wait_response(uint64_t token, struct opal_msg *msg)return 0 ; } +EXPORT_SYMBOL_GPL (opal_async_wait_response);static int opal_async_comp_event (struct notifier_block *nb,unsigned long msg_type,void *msg)
arch/powerpc/platforms/powernv/opal-rtc.c +19 -44
85 lines not on this page · raw message
arch/powerpc/platforms/powernv/opal-wrappers.S +2 -0
@@ -248,3 +248,5 @@ OPAL_CALL(opal_set_param, OPAL_SET_PARAM); OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI); OPAL_CALL(opal_register_dump_region, OPAL_REGISTER_DUMP_REGION); OPAL_CALL(opal_unregister_dump_region, OPAL_UNREGISTER_DUMP_REGION); +OPAL_CALL(opal_tpo_write, OPAL_WRITE_TPO); +OPAL_CALL(opal_tpo_read, OPAL_READ_TPO);
arch/powerpc/platforms/powernv/opal.c +6 -0
@@ -784,3 +784,9 @@ void opal_free_sg_list(struct opal_sg_list *sg) sg =NULL ; } } + +EXPORT_SYMBOL_GPL (opal_poll_events); +EXPORT_SYMBOL_GPL (opal_rtc_read); +EXPORT_SYMBOL_GPL (opal_rtc_write); +EXPORT_SYMBOL_GPL (opal_tpo_read); +EXPORT_SYMBOL_GPL (opal_tpo_write);
arch/powerpc/platforms/powernv/setup.c +0 -2
@@ -257,8 +257,6 @@ static unsigned long pnv_memory_block_size(void)static void __init pnv_setup_machdep_opal (void ) { ppc_md.get_boot_time = opal_get_boot_time; - ppc_md.get_rtc_time = opal_get_rtc_time; - ppc_md.set_rtc_time = opal_set_rtc_time; ppc_md.restart = pnv_restart; ppc_md.power_off = pnv_power_off; ppc_md.halt = pnv_halt;
drivers/rtc/Kconfig +11 -0
@@ -949,6 +949,17 @@ config RTC_DRV_NUC900 If you say yes here you get support for the RTC subsystem of the NUC910/NUC920 used in embedded systems. +config RTC_DRV_OPAL + tristate "IBM OPAL RTC driver" + depends on PPC_POWERNV + default y + help + If you say yes here you get support for the PowerNV platform RTC + driver based on OPAL interfaces. + + This driver can also be built as a module. If so, the module + will be called rtc-opal. + comment "on-CPU RTC drivers" config RTC_DRV_DAVINCI
drivers/rtc/Makefile +1 -0
@@ -91,6 +91,7 @@ obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc5121.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o +obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PALMAS) += rtc-palmas.o obj-$(CONFIG_RTC_DRV_PCAP) += rtc-pcap.o
drivers/rtc/rtc-opal.c new file +261 -0
261 lines not on this page · raw message
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20140930101448.9310.32342.stgit-bi+AKbBUZKY6gyzm1THtWbp2dZbC/[email protected]
Quoted 58 lines · Neelesh Gupta
The patch implements the OPAL rtc driver that binds with the rtc driver subsystem. The driver uses the platform device infrastructure to probe the rtc device and register it to rtc class framework. The 'wakeup' is supported depending upon the property 'has-tpo' present in the OF node. It provides a way to load the generic rtc driver in in the absence of an OPAL driver.
The patch also moves the existing OPAL rtc get/set time interfaces to the new driver and exposes the necessary OPAL calls using
EXPORT_SYMBOL_GPL.Test results:
-------------
Host:
[root@tul163p1 ~]# ls -l/sys/class/rtc/
total 0
lrwxrwxrwx 1 root root 0 Sep 30 04:58 rtc0 -> ../../devices/opal-rtc/rtc/rtc0 [root@tul163p1 ~]# cat/sys/devices/opal-rtc/rtc/rtc0/time
10:01:51
[root@tul163p1 ~]# cat/sys/devices/opal-rtc/rtc/rtc0/time
10:02:07
[root@tul163p1 ~]# echodate '+%s' -d '+ 3 minutes'>/sys/class/rtc/rtc0/wakealarm[root@tul163p1 ~]# cat/sys/class/rtc/rtc0/wakealarm
1412071532
[root@tul163p1 ~]#FSP:
$ smgr mfgState standby $ smgr mfgState ipling $Signed-off-by Neelesh Gupta <[email protected]>---
Changes in v2
=============
- AddedDocumentation/devicetree/bindings/rtc/rtc-opal.txt
- Explicitly turn offRTC_UIEmode by setting 'rtc->uie_unsupported'Dependency
==========
This patch depends upon the below patch posted on 'linuxppc-dev-uLR06cmDAlY/[email protected]' [PATCH 1/4] powerpc/powernv: Add OPAL check token callSigned-off-by Michael Neuling <mikey-/[email protected]>Documentation/devicetree/bindings/rtc/rtc-opal.txt | 16 + arch/powerpc/include/asm/opal.h | 7 - arch/powerpc/kernel/time.c | 1 arch/powerpc/platforms/powernv/opal-async.c | 3 arch/powerpc/platforms/powernv/opal-rtc.c | 63 +---- arch/powerpc/platforms/powernv/opal-wrappers.S | 2 arch/powerpc/platforms/powernv/opal.c | 6 arch/powerpc/platforms/powernv/setup.c | 2 drivers/rtc/Kconfig | 11 + drivers/rtc/Makefile | 1 drivers/rtc/rtc-opal.c | 261 ++++++++++++++++++++ 11 files changed, 325 insertions(+), 48 deletions(-)
Quoted 2 lines
create mode 100644
Documentation/devicetree/bindings/rtc/rtc-opal.txtcreate mode 100644drivers/rtc/rtc-opal.c
Hi Alessandro,
The patch depends upon few things in powerpc tree so could you please Ack the patch so that we can take it through the powerpc tree?
Thanks,
- Neelesh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html