Enable hierarchy irqdomian on x86 platforms
Subsystems (6)
cover Enable hierarchy irqdomian on x86 platforms
This is the last part to enable support of hierarchy domain on x86 platforms.
It first converts IOAPIC to support hierarchy irqdomain, then cleans up all unused code and interfaces. It also introduces a kernel boot parameter to configure CPU vector allocation policies.
It's based on my previous patch set at:
https://lkml.org/lkml/2014/9/26/538
And you may access it at:
https://github.com/jiangliu/linux.git irqdomain/p3v1
It has been tested on Intel 64-bit server and 32-bit laptop. It also passes Fengguang's 0day tests. Helps are welcomed for testing:
1) Intel MID platform
2) Intel CE or OLPC platforms
Patch 1-6 convert IOAPIC to support hierarchy irqdomain. Patch 7-16,22 clean up unused code, x86_io_apic_ops and header files. Patch 17-20 simplify struct irq_cfg.
Patch 21, 23-26 clean up code and interfaces further. Patch 27-28 introduces a mechanism to configure CPU vector allocation
policies.
Jiang Liu (28):
x86, irq: Kill unused setup_timer_IRQ0_pin()
x86, irq: Prepare IOAPIC interfaces to support hierarchy irqdomain x86, irq: Implement callbacks to enable hierarchy irqdomain on
IOAPICs
x86, irq: Refine the way to allocate irq_cfg for legacy IRQs x86, irq: Convert IOAPIC to use hierarchy irqdomain interfaces x86, irq: Kill unused old IOAPIC irqdomain interfaces x86, irq: Kill x86_io_apic_ops.print_entries and related interfaces x86, irq: Kill x86_io_apic_ops.setup_entry and related interfaces x86, irq: Kill x86_io_apic_ops.set_affinity and related interfaces x86, irq: Kill x86_io_apic_ops.eoi_ioapic_pin and related interfaces x86, irq: Kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
x86: Clean up unused forward declarations in x86_init.h
x86: irq_remapping: Clean up unsued code
iommu/vt-d: Clean up unsued code
iommu/amd: Clean up unsued code
x86: irq_remapping: Clean up unused interfaces
x86, irq: Kill irq_cfg.irq_remapped
iommu/vt-d: Move struct irq_2_iommu into intel_irq_remapping.c iommu/amd: Move struct irq_2_irte into amd_iommu.c
x86, irq: Move irq_cfg.irq_2_pin into io_apic.c
x86, irq: Kill struct io_apic_irq_attr
x86, irq: Kill x86_io_apic_ops.write and x86_io_apic_ops.modify x86, irq: Clean up io_apic.h
x86, irq: Kill unused alloc_irq_and_cfg_at()
x86, irq: Change functions only used in vector.c as static x86, irq: Kill function apic_set_affinity()
x86, irq: Introduce mechanism to support different vector allocation
policies
x86, irq: Add kernel parameter vector_alloc to set CPU vector
allocation policy
Documentation/kernel-parameters.txt | 6 + arch/x86/Kconfig | 1 - arch/x86/include/asm/hw_irq.h | 50 +- arch/x86/include/asm/io_apic.h | 81 +- arch/x86/include/asm/irq_remapping.h | 36 - arch/x86/include/asm/x86_init.h | 16 - arch/x86/kernel/acpi/boot.c | 19 +- arch/x86/kernel/apic/io_apic.c | 926 +++++++++++--------- arch/x86/kernel/apic/vector.c | 226 ++--- arch/x86/kernel/devicetree.c | 39 +- arch/x86/kernel/mpparse.c | 6 +- arch/x86/kernel/x86_init.c | 6 - arch/x86/pci/intel_mid_pci.c | 6 +- .../platform/intel-mid/device_libs/platform_wdt.c | 5 +- arch/x86/platform/intel-mid/intel-mid.c | 2 + arch/x86/platform/intel-mid/sfi.c | 6 +- arch/x86/platform/sfi/sfi.c | 5 +- drivers/iommu/amd_iommu.c | 150 +--- drivers/iommu/intel_irq_remapping.c | 202 +---- drivers/iommu/irq_remapping.c | 84 -- drivers/iommu/irq_remapping.h | 16 - 21 files changed, 709 insertions(+), 1179 deletions(-)
Signature · 1 line
1.7.10.4
RFC 1/28 x86, irq: Kill unused setup_timer_IRQ0_pin()
Now there's no user of setup_timer_IRQ0_pin(), so kill it.
---
Hi all,
This patch depends on Thomas' work to remove the last caller ofsetup_timer_IRQ0_pin(). So the "#if 0" is intended, so it won't block following up patches.
Regards!
Gerry
--- arch/x86/include/asm/io_apic.h | 1 - arch/x86/kernel/apic/io_apic.c | 17 ----------------- arch/x86/platform/intel-mid/intel-mid.c | 2 ++ 3 files changed, 2 insertions(+), 18 deletions(-)
arch/x86/include/asm/io_apic.h +0 -1
@@ -204,7 +204,6 @@ extern int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq, irq_hw_number_t hwirq);extern void mp_irqdomain_unmap (struct irq_domain *domain,unsigned int virq);extern int mp_set_gsi_attr (u32 gsi,int trigger,int polarity,int node); -extern void __init pre_init_apic_IRQ0 (void );extern void mp_save_irq (struct mpc_intsrc *m);extern bool mp_should_keep_irq (struct device *dev);
arch/x86/kernel/apic/io_apic.c +0 -17
@@ -3091,20 +3091,3 @@ bool mp_should_keep_irq(struct device *dev)return false; } - -/* Enable IOAPIC early just for system timer */ -void __init pre_init_apic_IRQ0 (void ) -{ -struct io_apic_irq_attr attr = {0 ,0 ,0 ,0 }; - -printk (KERN_INFO "Early APIC setup for system timer0\n" ); -#ifndef CONFIG_SMP -physid_set_mask_of_physid (boot_cpu_physical_apicid, - &phys_cpu_present_map); -#endif -setup_local_APIC (); - -io_apic_setup_irq_pin (0 ,0 , &attr); -irq_set_chip_and_handler_name (0 , &ioapic_chip, handle_edge_irq, -"edge" ); -}
arch/x86/platform/intel-mid/intel-mid.c +2 -0
@@ -99,7 +99,9 @@ static void __init intel_mid_time_init(void)return ; }/* we need at least one APB timer */ +#if 0 pre_init_apic_IRQ0 (); +#endif apbt_time_init (); }
Signature · 1 line
1.7.10.4
Re: [RFC v1 01/28] x86, irq: Kill unused setup_timer_IRQ0_pin()
Hi Thomas,
This patch has dependency on your patchset to remove
the last caller of setup_timer_IRQ0_pin(). What's the best way to solve this dependency? Should I pull your patches or just keeping the temporary "#if 0"?
Regards!
Gerry
Quoted 68 lines · Jiang Liu
Now there's no user of
setup_timer_IRQ0_pin(), so kill it.Signed-off-by Jiang Liu <[email protected]>---
Hi all,
This patch depends on Thomas' work to remove the last caller ofsetup_timer_IRQ0_pin(). So the "#if 0" is intended, so it won't block following up patches.
Regards!
Gerry--- arch/x86/include/asm/io_apic.h | 1 - arch/x86/kernel/apic/io_apic.c | 17 ----------------- arch/x86/platform/intel-mid/intel-mid.c | 2 ++ 3 files changed, 2 insertions(+), 18 deletions(-)arch/x86/include/asm/io_apic.h +0
-1@@ -204,7 +204,6 @@ extern int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq, irq_hw_number_t hwirq);extern void mp_irqdomain_unmap (struct irq_domain *domain,unsigned int virq);extern int mp_set_gsi_attr (u32 gsi,int trigger,int polarity,int node); -extern void __init pre_init_apic_IRQ0 (void );extern void mp_save_irq (struct mpc_intsrc *m);extern bool mp_should_keep_irq (struct device *dev);arch/x86/kernel/apic/io_apic.c +0
-17@@ -3091,20 +3091,3 @@ bool mp_should_keep_irq(struct device *dev)return false; } - -/* Enable IOAPIC early just for system timer */ -void __init pre_init_apic_IRQ0 (void ) -{ -struct io_apic_irq_attr attr = {0 ,0 ,0 ,0 }; - -printk (KERN_INFO "Early APIC setup for system timer0\n" ); -#ifndef CONFIG_SMP -physid_set_mask_of_physid (boot_cpu_physical_apicid, - &phys_cpu_present_map); -#endif -setup_local_APIC (); - -io_apic_setup_irq_pin (0 ,0 , &attr); -irq_set_chip_and_handler_name (0 , &ioapic_chip, handle_edge_irq, -"edge" ); -}arch/x86/platform/intel-mid/intel-mid.c +2
-0@@ -99,7 +99,9 @@ static void __init intel_mid_time_init(void)return ; }/* we need at least one APB timer */ +#if 0 pre_init_apic_IRQ0 (); +#endif apbt_time_init (); }
RFC 2/28 x86, irq: Prepare IOAPIC interfaces to support hierarchy irqdomain
In reply to Jiang LiuIntroduce helper functions to manipulate struct irq_alloc_info for IOAPIC. Also add extra parameter to IOAPIC interfaces to prepare for hierarchy irqdomain. Function mp_set_gsi_attr() will be killed once we have switched to hierarchy irqdomain.
--- arch/x86/include/asm/hw_irq.h | 2 ++ arch/x86/include/asm/io_apic.h | 14 +++++++++-- arch/x86/kernel/acpi/boot.c | 8 ++++--- arch/x86/kernel/apic/io_apic.c | 25 +++++++++++++++----- arch/x86/pci/intel_mid_pci.c | 4 +++- .../platform/intel-mid/device_libs/platform_wdt.c | 4 +++- arch/x86/platform/intel-mid/sfi.c | 5 +++- 7 files changed, 48 insertions(+), 14 deletions(-)
arch/x86/include/asm/hw_irq.h +2 -0
@@ -147,8 +147,10 @@ struct irq_alloc_info {struct {int ioapic_id;int ioapic_pin; +int ioapic_node;u32 ioapic_trigger :1 ;u32 ioapic_polarity :1 ; +u32 ioapic_valid :1 ; };#endif #ifdef CONFIG_DMAR_TABLE
arch/x86/include/asm/io_apic.h +12 -2
@@ -95,6 +95,8 @@ struct IR_IO_APIC_route_entry { index :15 ; } __attribute__ ((packed)); +struct irq_alloc_info ; +#define IOAPIC_AUTO -1#define IOAPIC_EDGE 0#define IOAPIC_LEVEL 1
@@ -194,7 +196,8 @@ extern u32 gsi_top;extern int mp_find_ioapic (u32 gsi);extern int mp_find_ioapic_pin (int ioapic,u32 gsi);extern u32 mp_pin_to_gsi (int ioapic,int pin); -extern int mp_map_gsi_to_irq (u32 gsi,unsigned int flags); +extern int mp_map_gsi_to_irq (u32 gsi,unsigned int flags, +struct irq_alloc_info *info);extern void mp_unmap_irq (int irq);extern int mp_register_ioapic (int id,u32 address,u32 gsi_base,struct ioapic_domain_cfg *cfg);
@@ -203,6 +206,8 @@ extern int mp_ioapic_registered(u32 gsi_base);extern int mp_irqdomain_map (struct irq_domain *domain,unsigned int virq,irq_hw_number_t hwirq);extern void mp_irqdomain_unmap (struct irq_domain *domain,unsigned int virq); +extern void ioapic_set_alloc_attr (struct irq_alloc_info *info, +int node,int trigger,int polarity);extern int mp_set_gsi_attr (u32 gsi,int trigger,int polarity,int node);extern void mp_save_irq (struct mpc_intsrc *m);
@@ -254,7 +259,12 @@ static inline void print_IO_APICs(void) {}#define gsi_top (NR_IRQS_LEGACY)static inline int mp_find_ioapic (u32 gsi) {return 0 ; }static inline u32 mp_pin_to_gsi (int ioapic,int pin) {return UINT_MAX ; } -static inline int mp_map_gsi_to_irq (u32 gsi,unsigned int flags) {return gsi; } +static inline int mp_map_gsi_to_irq (u32 gsi,unsigned int flags, +struct irq_alloc_info *info) +{ +return gsi; +} +static inline void mp_unmap_irq (int irq) { }static inline bool mp_should_keep_irq (struct device *dev) {return 1 ; }
arch/x86/kernel/acpi/boot.c +5 -3
@@ -404,6 +404,7 @@ static int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) {int irq, node; +struct irq_alloc_info info;if (acpi_irq_model !=ACPI_IRQ_MODEL_IOAPIC )return gsi;
@@ -420,7 +421,8 @@ static int mp_register_gsi(struct device *dev, u32 gsi, int trigger,return -1 ; } - irq =mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC ); +ioapic_set_alloc_attr (&info, node, trigger, polarity); + irq =mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC , &info);if (irq <0 )return irq;
@@ -440,7 +442,7 @@ static void mp_unregister_gsi(u32 gsi)if (acpi_gbl_FADT.sci_interrupt == gsi)return ; - irq =mp_map_gsi_to_irq (gsi,0 ); + irq =mp_map_gsi_to_irq (gsi,0 ,NULL );if (irq >0 )mp_unmap_irq (irq); }
@@ -620,7 +622,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irqp)int irq;down_read (&acpi_ioapic_rwsem); - irq =mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC |IOAPIC_MAP_CHECK ); + irq =mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC |IOAPIC_MAP_CHECK ,NULL );up_read (&acpi_ioapic_rwsem);if (irq >=0 ) { *irqp = irq;
arch/x86/kernel/apic/io_apic.c +19 -6
@@ -938,7 +938,19 @@ static int irq_trigger(int idx)return trigger; } -static int alloc_irq_from_domain (struct irq_domain *domain,u32 gsi,int pin) +void ioapic_set_alloc_attr (struct irq_alloc_info *info,int node, +int trigger,int polarity) +{ +init_irq_alloc_info (info,NULL ); + info->type =X86_IRQ_ALLOC_TYPE_IOAPIC ; + info->ioapic_node = node; + info->ioapic_trigger = trigger; + info->ioapic_polarity = polarity; + info->ioapic_valid =1 ; +} + +static int alloc_irq_from_domain (struct irq_domain *domain,u32 gsi,int pin, +struct irq_alloc_info *info) {int irq =-1 ;int ioapic = (int )(long )domain->host_data;
@@ -971,7 +983,7 @@ static int alloc_irq_from_domain(struct irq_domain *domain, u32 gsi, int pin) }static int mp_map_pin_to_irq (u32 gsi,int idx,int ioapic,int pin, -unsigned int flags) +unsigned int flags,struct irq_alloc_info *ainfo) {int irq;struct irq_domain *domain =mp_ioapic_irqdomain (ioapic);
@@ -1008,7 +1020,7 @@ static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin, }else { irq =irq_find_mapping (domain, pin);if (irq <=0 && (flags &IOAPIC_MAP_ALLOC )) - irq =alloc_irq_from_domain (domain, gsi, pin); + irq =alloc_irq_from_domain (domain, gsi, pin, ainfo); }if (flags &IOAPIC_MAP_ALLOC ) {
@@ -1058,10 +1070,11 @@ static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags) }#endif -return mp_map_pin_to_irq (gsi, idx, ioapic, pin, flags); +return mp_map_pin_to_irq (gsi, idx, ioapic, pin, flags,NULL ); } -int mp_map_gsi_to_irq (u32 gsi,unsigned int flags) +int mp_map_gsi_to_irq (u32 gsi,unsigned int flags, +struct irq_alloc_info *info) {int ioapic, pin, idx;
@@ -1074,7 +1087,7 @@ int mp_map_gsi_to_irq(u32 gsi, unsigned int flags)if ((flags &IOAPIC_MAP_CHECK ) && idx <0 )return -1 ; -return mp_map_pin_to_irq (gsi, idx, ioapic, pin, flags); +return mp_map_pin_to_irq (gsi, idx, ioapic, pin, flags, info); }void mp_unmap_irq (int irq)
arch/x86/pci/intel_mid_pci.c +3 -1
@@ -208,6 +208,7 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,static int intel_mid_pci_irq_enable (struct pci_dev *dev) { +struct irq_alloc_info info;int polarity;if (dev->irq_managed && dev->irq >0 )
@@ -217,6 +218,7 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev) polarity =0 ;/* active high */ else polarity =1 ;/* active low */ +ioapic_set_alloc_attr (&info,dev_to_node (&dev->dev),1 , polarity);/* * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
@@ -224,7 +226,7 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)*/ if (mp_set_gsi_attr (dev->irq,1 , polarity,dev_to_node (&dev->dev)))return -EBUSY ; -if (mp_map_gsi_to_irq (dev->irq,IOAPIC_MAP_ALLOC ) <0 ) +if (mp_map_gsi_to_irq (dev->irq,IOAPIC_MAP_ALLOC , &info) <0 )return -EBUSY ; dev->irq_managed =1 ;
arch/x86/platform/intel-mid/device_libs/platform_wdt.c +3 -1
@@ -27,6 +27,7 @@ static struct platform_device wdt_dev = {static int tangier_probe (struct platform_device *pdev) {int gsi; +struct irq_alloc_info info;struct intel_mid_wdt_pdata *pdata = pdev->dev.platform_data;if (!pdata)
@@ -34,8 +35,9 @@ static int tangier_probe(struct platform_device *pdev)/* IOAPIC builds identity mapping between GSI and IRQ on MID */ gsi = pdata->irq; +ioapic_set_alloc_attr (&info,cpu_to_node (0 ),1 ,0 );if (mp_set_gsi_attr (gsi,1 ,0 ,cpu_to_node (0 )) || -mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC ) <=0 ) { +mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC , &info) <=0 ) {dev_warn (&pdev->dev,"cannot find interrupt %d in ioapic\n" , gsi);return -EINVAL ;
arch/x86/platform/intel-mid/sfi.c +4 -1
@@ -434,6 +434,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)struct devs_id *dev =NULL ;int num, i, ret;int polarity; +struct irq_alloc_info info; sb = (struct sfi_table_simple *)table; num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
@@ -467,9 +468,11 @@ static int __init sfi_parse_devs(struct sfi_table_header *table) polarity =1 ; } +ioapic_set_alloc_attr (&info,NUMA_NO_NODE ,1 , polarity); ret =mp_set_gsi_attr (irq,1 , polarity,NUMA_NO_NODE );if (ret ==0 ) - ret =mp_map_gsi_to_irq (irq,IOAPIC_MAP_ALLOC ); + ret =mp_map_gsi_to_irq (irq,IOAPIC_MAP_ALLOC , + &info);WARN_ON (ret <0 ); }
Signature · 1 line
1.7.10.4
RFC 3/28 x86, irq: Implement callbacks to enable hierarchy irqdomain on IOAPICs
In reply to Jiang LiuImplement required callbacks to prepare for enabling hierarchy irqdomain on IOAPICs. Later we will clean up IOAPIC code a lot by using hierarchy irqdomain framework.
--- arch/x86/include/asm/io_apic.h | 10 ++ arch/x86/kernel/apic/io_apic.c | 233 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 238 insertions(+), 5 deletions(-)
arch/x86/include/asm/io_apic.h +10 -0
@@ -96,6 +96,7 @@ struct IR_IO_APIC_route_entry { } __attribute__ ((packed));struct irq_alloc_info ; +struct irq_data ;#define IOAPIC_AUTO -1#define IOAPIC_EDGE 0
@@ -206,6 +207,15 @@ extern int mp_ioapic_registered(u32 gsi_base);extern int mp_irqdomain_map (struct irq_domain *domain,unsigned int virq,irq_hw_number_t hwirq);extern void mp_irqdomain_unmap (struct irq_domain *domain,unsigned int virq); +extern int mp_irqdomain_alloc (struct irq_domain *domain,unsigned int virq, +unsigned int nr_irqs,void *arg); +extern void mp_irqdomain_free (struct irq_domain *domain,unsigned int virq, +unsigned int nr_irqs); +extern int mp_irqdomain_activate (struct irq_domain *domain, +struct irq_data *irq_data); +extern int mp_irqdomain_deactivate (struct irq_domain *domain, +struct irq_data *irq_data); +extern int mp_irqdomain_ioapic_idx (struct irq_domain *domain);extern void ioapic_set_alloc_attr (struct irq_alloc_info *info,int node,int trigger,int polarity);extern int mp_set_gsi_attr (u32 gsi,int trigger,int polarity,int node);
arch/x86/kernel/apic/io_apic.c +228 -5
293 lines not on this page · raw message
Signature · 1 line
1.7.10.4
RFC 4/28 x86, irq: Refine the way to allocate irq_cfg for legacy IRQs
In reply to Jiang LiuTo support legacy ISA IRQs, we need to preallocate irq_cfg structures for legacy ISA IRQs. Refine the way to allocate irq_cfg for legacy ISA IRQs, so it's more friend to hierarchy irqdomain implementation.
--- arch/x86/kernel/apic/io_apic.c | 13 +----------- arch/x86/kernel/apic/vector.c | 43 ++++++++++++++++++++++++++++++++++++++-- 2 files changed, 42 insertions(+), 14 deletions(-)
arch/x86/kernel/apic/io_apic.c +1 -12
@@ -264,8 +264,7 @@ static void free_ioapic_saved_registers(int idx)int __init arch_early_ioapic_init (void ) { -struct irq_cfg *cfg; -int i, node =cpu_to_node (0 ); +int i;if (!nr_legacy_irqs ()) io_apic_irqs = ~0UL ;
@@ -273,16 +272,6 @@ int __init arch_early_ioapic_init(void)for_each_ioapic (i)alloc_ioapic_saved_registers (i); -/* -* For legacy IRQ's, start with assigning irq0 to irq15 to -* IRQ0_VECTOR to IRQ15_VECTOR for all cpu's. -*/ -for (i =0 ; i <nr_legacy_irqs (); i++) { - cfg =alloc_irq_and_cfg_at (i, node); - cfg->vector =IRQ0_VECTOR + i; -cpumask_setall (cfg->domain); - } -return 0 ; }
arch/x86/kernel/apic/vector.c +41 -2
71 lines not on this page · raw message
Signature · 1 line
1.7.10.4
RFC 5/28 x86, irq: Convert IOAPIC to use hierarchy irqdomain interfaces
In reply to Jiang LiuConvert IOAPIC driver to support and use hierarchy irqdomain interfaces. It's a little big, but it always break bisectings if we split it into multiple patches.
--- arch/x86/kernel/acpi/boot.c | 11 +- arch/x86/kernel/apic/io_apic.c | 306 ++++++++++++++------ arch/x86/kernel/devicetree.c | 39 ++- arch/x86/kernel/mpparse.c | 6 +- arch/x86/pci/intel_mid_pci.c | 2 - .../platform/intel-mid/device_libs/platform_wdt.c | 3 +- arch/x86/platform/intel-mid/sfi.c | 5 +- arch/x86/platform/sfi/sfi.c | 5 +- 8 files changed, 256 insertions(+), 121 deletions(-)
arch/x86/kernel/acpi/boot.c +4 -7
@@ -416,11 +416,6 @@ static int mp_register_gsi(struct device *dev, u32 gsi, int trigger, trigger = trigger ==ACPI_EDGE_SENSITIVE ?0 :1 ; polarity = polarity ==ACPI_ACTIVE_HIGH ?0 :1 ; node = dev ?dev_to_node (dev) :NUMA_NO_NODE ; -if (mp_set_gsi_attr (gsi, trigger, polarity, node)) { -pr_warn ("Failed to set pin attr for GSI%d\n" , gsi); -return -1 ; - } -ioapic_set_alloc_attr (&info, node, trigger, polarity); irq =mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC , &info);if (irq <0 )
@@ -448,8 +443,10 @@ static void mp_unregister_gsi(u32 gsi) }static struct irq_domain_ops acpi_irqdomain_ops = { - .map = mp_irqdomain_map, - .unmap = mp_irqdomain_unmap, + .alloc = mp_irqdomain_alloc, + .free = mp_irqdomain_free, + .activate = mp_irqdomain_activate, + .deactivate = mp_irqdomain_deactivate, }; static int __init
arch/x86/kernel/apic/io_apic.c +224 -82
466 lines not on this page · raw message
arch/x86/kernel/devicetree.c +18 -21
@@ -196,38 +196,35 @@ static struct of_ioapic_type of_ioapic_type[] = }, }; -static int ioapic_xlate (struct irq_domain *domain, -struct device_node *controller, -const u32 *intspec,u32 intsize, -irq_hw_number_t *out_hwirq,u32 *out_type) +static int dt_irqdomain_alloc (struct irq_domain *domain,unsigned int virq, +unsigned int nr_irqs,void *arg) { +struct of_phandle_args *irq_data = (void *)arg;struct of_ioapic_type *it; -u32 line, idx, gsi; +struct irq_alloc_info tmp; -if (WARN_ON (intsize <2 )) +if (WARN_ON (irq_data->args_count <2 ))return -EINVAL ; - - line = intspec[0 ]; - -if (intspec[1 ] >=ARRAY_SIZE (of_ioapic_type)) +if (irq_data->args[1 ] >=ARRAY_SIZE (of_ioapic_type))return -EINVAL ; - it = &of_ioapic_type[intspec[1 ]]; + it = &of_ioapic_type[irq_data->args[1 ]]; +ioapic_set_alloc_attr (&tmp,NUMA_NO_NODE , it->trigger, it->polarity); + tmp.ioapic_id =mpc_ioapic_id (mp_irqdomain_ioapic_idx (domain)); + tmp.ioapic_pin = irq_data->args[0 ]; + virq =mp_irqdomain_alloc (domain, virq, nr_irqs, &tmp); - idx = (u32 )(long )domain->host_data; - gsi =mp_pin_to_gsi (idx, line); -if (mp_set_gsi_attr (gsi, it->trigger, it->polarity,cpu_to_node (0 ))) -return -EBUSY ; +if (virq >=0 && it->out_type !=irq_get_trigger_type (virq)) +irq_set_irq_type (virq, it->out_type); - *out_hwirq = line; - *out_type = it->out_type; -return 0 ; +return virq; }const struct irq_domain_ops ioapic_irq_domain_ops = { - .map = mp_irqdomain_map, - .unmap = mp_irqdomain_unmap, - .xlate = ioapic_xlate, + .alloc = dt_irqdomain_alloc, + .free = mp_irqdomain_free, + .activate = mp_irqdomain_activate, + .deactivate = mp_irqdomain_deactivate, };static void __init dtb_add_ioapic (struct device_node *dn)
arch/x86/kernel/mpparse.c +4 -2
@@ -114,8 +114,10 @@ static void __init MP_bus_info(struct mpc_bus *m) }static struct irq_domain_ops mp_ioapic_irqdomain_ops = { - .map = mp_irqdomain_map, - .unmap = mp_irqdomain_unmap, + .alloc = mp_irqdomain_alloc, + .free = mp_irqdomain_free, + .activate = mp_irqdomain_activate, + .deactivate = mp_irqdomain_deactivate, };static void __init MP_ioapic_info (struct mpc_ioapic *m)
arch/x86/pci/intel_mid_pci.c +0 -2
@@ -224,8 +224,6 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to * IOAPIC RTE entries, so we just enable RTE for the device. */ -if (mp_set_gsi_attr (dev->irq,1 , polarity,dev_to_node (&dev->dev))) -return -EBUSY ;if (mp_map_gsi_to_irq (dev->irq,IOAPIC_MAP_ALLOC , &info) <0 )return -EBUSY ;
arch/x86/platform/intel-mid/device_libs/platform_wdt.c +1 -2
@@ -36,8 +36,7 @@ static int tangier_probe(struct platform_device *pdev)/* IOAPIC builds identity mapping between GSI and IRQ on MID */ gsi = pdata->irq;ioapic_set_alloc_attr (&info,cpu_to_node (0 ),1 ,0 ); -if (mp_set_gsi_attr (gsi,1 ,0 ,cpu_to_node (0 )) || -mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC , &info) <=0 ) { +if (mp_map_gsi_to_irq (gsi,IOAPIC_MAP_ALLOC , &info) <=0 ) {dev_warn (&pdev->dev,"cannot find interrupt %d in ioapic\n" , gsi);return -EINVAL ;
arch/x86/platform/intel-mid/sfi.c +1 -4
@@ -469,10 +469,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table) }ioapic_set_alloc_attr (&info,NUMA_NO_NODE ,1 , polarity); - ret =mp_set_gsi_attr (irq,1 , polarity,NUMA_NO_NODE ); -if (ret ==0 ) - ret =mp_map_gsi_to_irq (irq,IOAPIC_MAP_ALLOC , - &info); + ret =mp_map_gsi_to_irq (irq,IOAPIC_MAP_ALLOC , &info);WARN_ON (ret <0 ); }
arch/x86/platform/sfi/sfi.c +4 -1
@@ -72,7 +72,10 @@ static int __init sfi_parse_cpus(struct sfi_table_header *table)#ifdef CONFIG_X86_IO_APIC static struct irq_domain_ops sfi_ioapic_irqdomain_ops = { - .map = mp_irqdomain_map, + .alloc = mp_irqdomain_alloc, + .free = mp_irqdomain_free, + .activate = mp_irqdomain_activate, + .deactivate = mp_irqdomain_deactivate, };static int __init sfi_parse_ioapic (struct sfi_table_header *table)
Signature · 1 line
1.7.10.4
RFC 6/28 x86, irq: Kill unused old IOAPIC irqdomain interfaces
In reply to Jiang LiuNow we have converted to hierarchy irqdomain, so kill unused old IOAPIC irqdomain interfaces and code.
--- arch/x86/include/asm/io_apic.h | 4 - arch/x86/kernel/apic/io_apic.c | 199 ---------------------------------------- 2 files changed, 203 deletions(-)
arch/x86/include/asm/io_apic.h +0 -4
@@ -204,9 +204,6 @@ extern int mp_register_ioapic(int id, u32 address, u32 gsi_base, struct ioapic_domain_cfg *cfg);extern int mp_unregister_ioapic (u32 gsi_base);extern int mp_ioapic_registered (u32 gsi_base); -extern int mp_irqdomain_map (struct irq_domain *domain,unsigned int virq, -irq_hw_number_t hwirq); -extern void mp_irqdomain_unmap (struct irq_domain *domain,unsigned int virq);extern int mp_irqdomain_alloc (struct irq_domain *domain,unsigned int virq,unsigned int nr_irqs,void *arg); extern void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
@@ -218,7 +215,6 @@ extern int mp_irqdomain_deactivate(struct irq_domain *domain,extern int mp_irqdomain_ioapic_idx (struct irq_domain *domain);extern void ioapic_set_alloc_attr (struct irq_alloc_info *info,int node,int trigger,int polarity); -extern int mp_set_gsi_attr (u32 gsi,int trigger,int polarity,int node);extern void mp_save_irq (struct mpc_intsrc *m);extern bool mp_should_keep_irq (struct device *dev);
arch/x86/kernel/apic/io_apic.c +0 -199
235 lines not on this page · raw message
Signature · 1 line
1.7.10.4
RFC 7/28 x86, irq: Kill x86_io_apic_ops.print_entries and related interfaces
In reply to Jiang LiuNow there is no user of x86_io_apic_ops.print_entries anymore, so kill it.
--- arch/x86/include/asm/io_apic.h | 3 --- arch/x86/include/asm/x86_init.h | 1 - arch/x86/kernel/apic/io_apic.c | 8 ++++---- arch/x86/kernel/x86_init.c | 1 - drivers/iommu/intel_irq_remapping.c | 7 ------- 5 files changed, 4 insertions(+), 16 deletions(-)
arch/x86/include/asm/io_apic.h +0 -3
@@ -226,8 +226,6 @@ extern unsigned int native_io_apic_read(unsigned int apic, unsigned int reg);extern void native_io_apic_write (unsigned int apic,unsigned int reg,unsigned int val);extern void native_io_apic_modify (unsigned int apic,unsigned int reg,unsigned int val);extern void native_disable_io_apic (void ); -extern void native_io_apic_print_entries (unsigned int apic,unsigned int nr_entries); -extern void intel_ir_io_apic_print_entries (unsigned int apic,unsigned int nr_entries);extern int native_ioapic_set_affinity (struct irq_data *,const struct cpumask *,bool );
@@ -292,7 +290,6 @@ static inline void disable_ioapic_support(void) { }#define native_io_apic_write NULL#define native_io_apic_modify NULL#define native_disable_io_apic NULL -#define native_io_apic_print_entries NULL#define native_ioapic_set_affinity NULL#define native_setup_ioapic_entry NULL#define native_eoi_ioapic_pin NULL
arch/x86/include/asm/x86_init.h +0 -1
@@ -194,7 +194,6 @@ struct x86_io_apic_ops {void (*write) (unsigned int apic,unsigned int reg,unsigned int value);void (*modify) (unsigned int apic,unsigned int reg,unsigned int value);void (*disable)(void ); -void (*print_entries)(unsigned int apic,unsigned int nr_entries);int (*set_affinity)(struct irq_data *data,const struct cpumask *mask,bool force);
arch/x86/kernel/apic/io_apic.c +4 -4
@@ -1331,7 +1331,8 @@ static void __init setup_IO_APIC_irqs(void) } } -void native_io_apic_print_entries (unsigned int apic,unsigned int nr_entries) +static void native_io_apic_print_entries (unsigned int apic, +unsigned int nr_entries) {int i;
@@ -1356,8 +1357,7 @@ void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries) } } -void intel_ir_io_apic_print_entries (unsigned int apic, -unsigned int nr_entries) +static void ir_io_apic_print_entries (unsigned int apic,unsigned int nr_entries) {int i;
@@ -1448,7 +1448,7 @@ static void __init print_IO_APIC(int ioapic_idx) domain =mp_ioapic_irqdomain (ioapic_idx);if (domain &&irq_remapping_domain_is_remapped (domain)) -intel_ir_io_apic_print_entries (ioapic_idx, reg_01.bits.entries); +ir_io_apic_print_entries (ioapic_idx, reg_01.bits.entries);else native_io_apic_print_entries (ioapic_idx, reg_01.bits.entries); }
arch/x86/kernel/x86_init.c +0 -1
@@ -154,7 +154,6 @@ struct x86_io_apic_ops x86_io_apic_ops = { .write = native_io_apic_write, .modify = native_io_apic_modify, .disable = native_disable_io_apic, - .print_entries = native_io_apic_print_entries, .set_affinity = native_ioapic_set_affinity, .setup_entry = native_setup_ioapic_entry, .eoi_ioapic_pin = native_eoi_ioapic_pin,
drivers/iommu/intel_irq_remapping.c +0 -7
@@ -663,13 +663,6 @@ static int __init intel_enable_irq_remapping(void) irq_remapping_enabled =1 ; -/* -* VT-d has a different layout for IO-APIC entries when -* interrupt remapping is enabled. So it needs a special routine -* to print IO-APIC entries for debugging purposes too. -*/ - x86_io_apic_ops.print_entries = intel_ir_io_apic_print_entries; -pr_info ("Enabled IRQ remapping in %s mode\n" , eim ?"x2apic" :"xapic" );return eim ?IRQ_REMAP_X2APIC_MODE :IRQ_REMAP_XAPIC_MODE ;
Signature · 1 line
1.7.10.4
RFC 8/28 x86, irq: Kill x86_io_apic_ops.setup_entry and related interfaces
In reply to Jiang LiuNow there is no user of x86_io_apic_ops.setup_entry anymore, so kill it.
--- arch/x86/include/asm/io_apic.h | 4 ---- arch/x86/include/asm/irq_remapping.h | 13 ------------- arch/x86/include/asm/x86_init.h | 3 --- arch/x86/kernel/apic/io_apic.c | 24 ------------------------ arch/x86/kernel/x86_init.c | 1 - drivers/iommu/irq_remapping.c | 13 ------------- 6 files changed, 58 deletions(-)
arch/x86/include/asm/io_apic.h +0 -4
@@ -150,9 +150,6 @@ struct irq_cfg;extern void ioapic_insert_resources (void );extern int arch_early_ioapic_init (void ); -extern int native_setup_ioapic_entry (int ,struct IO_APIC_route_entry *, -unsigned int ,int , -struct io_apic_irq_attr *);extern void eoi_ioapic_irq (unsigned int irq,struct irq_cfg *cfg);extern void native_eoi_ioapic_pin (int apic,int pin,int vector);
@@ -291,7 +288,6 @@ static inline void disable_ioapic_support(void) { }#define native_io_apic_modify NULL#define native_disable_io_apic NULL#define native_ioapic_set_affinity NULL -#define native_setup_ioapic_entry NULL#define native_eoi_ioapic_pin NULL#endif
arch/x86/include/asm/irq_remapping.h +0 -13
@@ -43,11 +43,6 @@ extern int irq_remapping_enable(void);extern void irq_remapping_disable (void );extern int irq_remapping_reenable (int );extern int irq_remap_enable_fault_handling (void ); -extern int setup_ioapic_remapped_entry (int irq, -struct IO_APIC_route_entry *entry, -unsigned int destination, -int vector, -struct io_apic_irq_attr *attr);extern void free_remapped_irq (int irq);extern void panic_if_irq_remap (const char *msg); extern bool setup_remapped_irq(int irq,
@@ -98,14 +93,6 @@ static inline int irq_remapping_enable(void) { return -ENODEV; }static inline void irq_remapping_disable (void ) { }static inline int irq_remapping_reenable (int eim) {return -ENODEV ; }static inline int irq_remap_enable_fault_handling (void ) {return -ENODEV ; } -static inline int setup_ioapic_remapped_entry (int irq, -struct IO_APIC_route_entry *entry, -unsigned int destination, -int vector, -struct io_apic_irq_attr *attr) -{ -return -ENODEV ; -}static inline void free_remapped_irq (int irq) { }static inline void panic_if_irq_remap (const char *msg)
arch/x86/include/asm/x86_init.h +0 -3
@@ -197,9 +197,6 @@ struct x86_io_apic_ops {int (*set_affinity)(struct irq_data *data,const struct cpumask *mask,bool force); -int (*setup_entry)(int irq,struct IO_APIC_route_entry *entry, -unsigned int destination,int vector, -struct io_apic_irq_attr *attr);void (*eoi_ioapic_pin)(int apic,int pin,int vector); };
arch/x86/kernel/apic/io_apic.c +0 -24
@@ -1288,30 +1288,6 @@ static inline int IO_APIC_irq_trigger(int irq) }#endif -int native_setup_ioapic_entry (int irq,struct IO_APIC_route_entry *entry, -unsigned int destination,int vector, -struct io_apic_irq_attr *attr) -{ -memset (entry,0 ,sizeof (*entry)); - - entry->delivery_mode = apic->irq_delivery_mode; - entry->dest_mode = apic->irq_dest_mode; - entry->dest = destination; - entry->vector = vector; - entry->mask =0 ;/* enable IRQ */ - entry->trigger = attr->trigger; - entry->polarity = attr->polarity; - -/* -* Mask level triggered irqs. -* Use IRQ_DELAYED_DISABLE for edge triggered irqs. -*/ -if (attr->trigger) - entry->mask =1 ; - -return 0 ; -} -static void __init setup_IO_APIC_irqs (void ) {unsigned int ioapic, pin;
arch/x86/kernel/x86_init.c +0 -1
@@ -155,6 +155,5 @@ struct x86_io_apic_ops x86_io_apic_ops = { .modify = native_io_apic_modify, .disable = native_disable_io_apic, .set_affinity = native_ioapic_set_affinity, - .setup_entry = native_setup_ioapic_entry, .eoi_ioapic_pin = native_eoi_ioapic_pin, };
drivers/iommu/irq_remapping.c +0 -13
@@ -62,7 +62,6 @@ static void __init irq_remapping_modify_x86_ops(void) { x86_io_apic_ops.disable = irq_remapping_disable_io_apic; x86_io_apic_ops.set_affinity = set_remapped_irq_affinity; - x86_io_apic_ops.setup_entry = setup_ioapic_remapped_entry; x86_io_apic_ops.eoi_ioapic_pin = eoi_ioapic_pin_remapped; }
@@ -177,18 +176,6 @@ int __init irq_remap_enable_fault_handling(void)return remap_ops->enable_faulting (); } -int setup_ioapic_remapped_entry (int irq, -struct IO_APIC_route_entry *entry, -unsigned int destination,int vector, -struct io_apic_irq_attr *attr) -{ -if (!remap_ops || !remap_ops->setup_ioapic_entry) -return -ENODEV ; - -return remap_ops->setup_ioapic_entry (irq, entry, destination, - vector, attr); -} -static int set_remapped_irq_affinity (struct irq_data *data,const struct cpumask *mask,bool force) {
Signature · 1 line
1.7.10.4
RFC 9/28 x86, irq: Kill x86_io_apic_ops.set_affinity and related interfaces
In reply to Jiang LiuNow there is no user of x86_io_apic_ops.set_affinity anymore, so kill it.
--- arch/x86/include/asm/io_apic.h | 4 ---- arch/x86/include/asm/x86_init.h | 3 --- arch/x86/kernel/apic/io_apic.c | 25 +------------------------ arch/x86/kernel/x86_init.c | 1 - drivers/iommu/irq_remapping.c | 16 ---------------- 5 files changed, 1 insertion(+), 48 deletions(-)
arch/x86/include/asm/io_apic.h +0 -4
@@ -223,9 +223,6 @@ extern unsigned int native_io_apic_read(unsigned int apic, unsigned int reg);extern void native_io_apic_write (unsigned int apic,unsigned int reg,unsigned int val);extern void native_io_apic_modify (unsigned int apic,unsigned int reg,unsigned int val);extern void native_disable_io_apic (void ); -extern int native_ioapic_set_affinity (struct irq_data *, -const struct cpumask *, -bool );static inline unsigned int io_apic_read (unsigned int apic,unsigned int reg) {
@@ -287,7 +284,6 @@ static inline void disable_ioapic_support(void) { }#define native_io_apic_write NULL#define native_io_apic_modify NULL#define native_disable_io_apic NULL -#define native_ioapic_set_affinity NULL#define native_eoi_ioapic_pin NULL#endif
arch/x86/include/asm/x86_init.h +0 -3
@@ -194,9 +194,6 @@ struct x86_io_apic_ops {void (*write) (unsigned int apic,unsigned int reg,unsigned int value);void (*modify) (unsigned int apic,unsigned int reg,unsigned int value);void (*disable)(void ); -int (*set_affinity)(struct irq_data *data, -const struct cpumask *mask, -bool force);void (*eoi_ioapic_pin)(int apic,int pin,int vector); };
arch/x86/kernel/apic/io_apic.c +1 -24
@@ -1810,29 +1810,6 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq } } -int native_ioapic_set_affinity (struct irq_data *data, -const struct cpumask *mask, -bool force) -{ -unsigned int dest, irq = data->irq; -unsigned long flags; -int ret; - -if (!config_enabled (CONFIG_SMP )) -return -EPERM ; - -raw_spin_lock_irqsave (&ioapic_lock, flags); - ret =apic_set_affinity (data, mask, &dest); -if (!ret) { -/* Only the high 8 bits are valid. */ - dest =SET_APIC_LOGICAL_ID (dest); -__target_IO_APIC_irq (irq, dest,irqd_cfg (data)); - ret =IRQ_SET_MASK_OK_NOCOPY ; - } -raw_spin_unlock_irqrestore (&ioapic_lock, flags); -return ret; -} -atomic_t irq_mis_count;#ifdef CONFIG_GENERIC_PENDING_IRQ
@@ -2710,7 +2687,7 @@ void __init setup_ioapic_dest(void)else mask = apic->target_cpus (); - x86_io_apic_ops.set_affinity (idata, mask, false); +irq_set_affinity (irq, mask); } }
arch/x86/kernel/x86_init.c +0 -1
@@ -154,6 +154,5 @@ struct x86_io_apic_ops x86_io_apic_ops = { .write = native_io_apic_write, .modify = native_io_apic_modify, .disable = native_disable_io_apic, - .set_affinity = native_ioapic_set_affinity, .eoi_ioapic_pin = native_eoi_ioapic_pin, };
drivers/iommu/irq_remapping.c +0 -16
@@ -25,10 +25,6 @@ int no_x2apic_optout;static struct irq_remap_ops *remap_ops; -static int set_remapped_irq_affinity (struct irq_data *data, -const struct cpumask *mask, -bool force); -static bool irq_remapped (struct irq_cfg *cfg) {return (cfg->remapped ==1 );
@@ -61,7 +57,6 @@ static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)static void __init irq_remapping_modify_x86_ops (void ) { x86_io_apic_ops.disable = irq_remapping_disable_io_apic; - x86_io_apic_ops.set_affinity = set_remapped_irq_affinity; x86_io_apic_ops.eoi_ioapic_pin = eoi_ioapic_pin_remapped; }
@@ -176,16 +171,6 @@ int __init irq_remap_enable_fault_handling(void)return remap_ops->enable_faulting (); } -static int set_remapped_irq_affinity (struct irq_data *data, -const struct cpumask *mask,bool force) -{ -if (!config_enabled (CONFIG_SMP ) || !remap_ops || - !remap_ops->set_affinity) -return 0 ; - -return remap_ops->set_affinity (data, mask, force); -} -void free_remapped_irq (int irq) {struct irq_cfg *cfg =irq_cfg (irq);
@@ -237,7 +222,6 @@ void irq_remap_modify_chip_defaults(struct irq_chip *chip) chip->irq_print_chip = ir_print_prefix; chip->irq_ack = ir_ack_apic_edge; chip->irq_eoi = ir_ack_apic_level; - chip->irq_set_affinity = x86_io_apic_ops.set_affinity; }bool setup_remapped_irq (int irq,struct irq_cfg *cfg,struct irq_chip *chip)
Signature · 1 line
1.7.10.4
RFC 10/28 x86, irq: Kill x86_io_apic_ops.eoi_ioapic_pin and related interfaces
In reply to Jiang LiuNow there is no user of x86_io_apic_ops.eoi_ioapic_pin anymore, so kill it.
--- arch/x86/include/asm/io_apic.h | 7 ------- arch/x86/include/asm/x86_init.h | 1 - arch/x86/kernel/apic/io_apic.c | 38 +------------------------------------- arch/x86/kernel/x86_init.c | 1 - drivers/iommu/irq_remapping.c | 19 ------------------- 5 files changed, 1 insertion(+), 65 deletions(-)
arch/x86/include/asm/io_apic.h +0 -7
@@ -150,10 +150,6 @@ struct irq_cfg;extern void ioapic_insert_resources (void );extern int arch_early_ioapic_init (void ); -extern void eoi_ioapic_irq (unsigned int irq,struct irq_cfg *cfg); - -extern void native_eoi_ioapic_pin (int apic,int pin,int vector); -extern int save_ioapic_entries (void );extern void mask_ioapic_entries (void );extern int restore_ioapic_entries (void );
@@ -238,8 +234,6 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned x86_io_apic_ops.modify (apic, reg, value); } -extern void io_apic_eoi (unsigned int apic,unsigned int vector); -extern void setup_IO_APIC (void );extern void enable_IO_APIC (void );extern void disable_IO_APIC (void );
@@ -284,7 +278,6 @@ static inline void disable_ioapic_support(void) { }#define native_io_apic_write NULL#define native_io_apic_modify NULL#define native_disable_io_apic NULL -#define native_eoi_ioapic_pin NULL#endif #endif /* _ASM_X86_IO_APIC_H */
arch/x86/include/asm/x86_init.h +0 -1
@@ -194,7 +194,6 @@ struct x86_io_apic_ops {void (*write) (unsigned int apic,unsigned int reg,unsigned int value);void (*modify) (unsigned int apic,unsigned int reg,unsigned int value);void (*disable)(void ); -void (*eoi_ioapic_pin)(int apic,int pin,int vector); };extern struct x86_init_ops x86_init;
arch/x86/kernel/apic/io_apic.c +1 -37
@@ -290,7 +290,7 @@ static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) + (mpc_ioapic_addr (idx) & ~PAGE_MASK ); } -void io_apic_eoi (unsigned int apic,unsigned int vector) +static inline void io_apic_eoi (unsigned int apic,unsigned int vector) {struct io_apic __iomem *io_apic =io_apic_base (apic);writel (vector, &io_apic->eoi);
@@ -546,30 +546,6 @@ static void unmask_ioapic_irq(struct irq_data *data)* Otherwise, we simulate the EOI message manually by changing the trigger * mode to edge and then back to level, with RTE being masked during this. */ -void native_eoi_ioapic_pin (int apic,int pin,int vector) -{ -if (mpc_ioapic_ver (apic) >=0x20 ) { -io_apic_eoi (apic, vector); - }else { -struct IO_APIC_route_entry entry, entry1; - - entry = entry1 =__ioapic_read_entry (apic, pin); - -/* -* Mask the entry and change the trigger mode to edge. -*/ - entry1.mask =1 ; - entry1.trigger =IOAPIC_EDGE ; - -__ioapic_write_entry (apic, pin, entry1); - -/* -* Restore the previous level triggered entry. -*/ -__ioapic_write_entry (apic, pin, entry); - } -} -static void eoi_io_apic (bool remapped,int apic,int pin,int vector) {if (unlikely (remapped)) {
@@ -602,18 +578,6 @@ static void eoi_io_apic(bool remapped, int apic, int pin, int vector) } } -void eoi_ioapic_irq (unsigned int irq,struct irq_cfg *cfg) -{ -struct irq_pin_list *entry; -unsigned long flags; - -raw_spin_lock_irqsave (&ioapic_lock, flags); -for_each_irq_pin (entry, cfg->irq_2_pin) - x86_io_apic_ops.eoi_ioapic_pin (entry->apic, entry->pin, - cfg->vector); -raw_spin_unlock_irqrestore (&ioapic_lock, flags); -} -static void clear_IO_APIC_pin (unsigned int apic,unsigned int pin) {struct IO_APIC_route_entry entry;
arch/x86/kernel/x86_init.c +0 -1
@@ -154,5 +154,4 @@ struct x86_io_apic_ops x86_io_apic_ops = { .write = native_io_apic_write, .modify = native_io_apic_modify, .disable = native_disable_io_apic, - .eoi_ioapic_pin = native_eoi_ioapic_pin, };
drivers/iommu/irq_remapping.c +0 -19
@@ -43,21 +43,9 @@ static void irq_remapping_disable_io_apic(void)disconnect_bsp_APIC (0 ); } -static void eoi_ioapic_pin_remapped (int apic,int pin,int vector) -{ -/* -* Intr-remapping uses pin number as the virtual vector -* in the RTE. Actual vector is programmed in -* intr-remapping table entry. Hence for the io-apic -* EOI we use the pin number. -*/ -io_apic_eoi (apic, pin); -} -static void __init irq_remapping_modify_x86_ops (void ) { x86_io_apic_ops.disable = irq_remapping_disable_io_apic; - x86_io_apic_ops.eoi_ioapic_pin = eoi_ioapic_pin_remapped; }static __init int setup_nointremap (char *str)
@@ -193,12 +181,6 @@ void ir_ack_apic_edge(struct irq_data *data)ack_APIC_irq (); } -static void ir_ack_apic_level (struct irq_data *data) -{ -ack_APIC_irq (); -eoi_ioapic_irq (data->irq,irqd_cfg (data)); -} -void irq_remapping_print_chip (struct irq_data *data,struct seq_file *p) {/*
@@ -221,7 +203,6 @@ void irq_remap_modify_chip_defaults(struct irq_chip *chip) { chip->irq_print_chip = ir_print_prefix; chip->irq_ack = ir_ack_apic_edge; - chip->irq_eoi = ir_ack_apic_level; }bool setup_remapped_irq (int irq,struct irq_cfg *cfg,struct irq_chip *chip)
Signature · 1 line
1.7.10.4
RFC 11/28 x86, irq: Kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
In reply to Jiang LiuThere's no user of irq_alloc_hwirqs(), irq_alloc_hwirq(), irq_free_hwirqs() and irq_free_hwirq() anymore, so kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ and related code.
--- arch/x86/Kconfig | 1 - arch/x86/kernel/apic/vector.c | 34 ---------------------------------- 2 files changed, 35 deletions(-)
arch/x86/Kconfig +0 -1
@@ -837,7 +837,6 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC def_bool y depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI - select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ select IRQ_DOMAIN select IRQ_DOMAIN_HIERARCHY
arch/x86/kernel/apic/vector.c +0 -34
@@ -656,40 +656,6 @@ void irq_force_complete_move(int irq)void irq_complete_move (struct irq_cfg *cfg) { }#endif -/* -* Dynamic irq allocate and deallocation. Should be replaced by irq domains! -*/ -int arch_setup_hwirq (unsigned int irq,int node) -{ -struct irq_cfg *cfg; -unsigned long flags; -int ret; - - cfg =alloc_irq_cfg (node); -if (!cfg) -return -ENOMEM ; - -raw_spin_lock_irqsave (&vector_lock, flags); - ret =__assign_irq_vector (irq, cfg, apic->target_cpus ()); -raw_spin_unlock_irqrestore (&vector_lock, flags); - -if (!ret) -irq_set_chip_data (irq, cfg); -else -free_irq_cfg (cfg); -return ret; -} - -void arch_teardown_hwirq (unsigned int irq) -{ -struct irq_cfg *cfg =irq_cfg (irq); - -free_remapped_irq (irq); -clear_irq_vector (irq, cfg); -irq_set_chip_data (irq,NULL ); -free_irq_cfg (cfg); -} -static void __init print_APIC_field (int base) {int i;
Signature · 1 line
1.7.10.4
RFC 12/28 x86: Clean up unused forward declarations in x86_init.h
In reply to Jiang Liu--- arch/x86/include/asm/x86_init.h | 6 ------ 1 file changed, 6 deletions(-)
arch/x86/include/asm/x86_init.h +0 -6
@@ -171,7 +171,6 @@ struct x86_platform_ops { };struct pci_dev ; -struct msi_msg ;struct msi_desc ;struct x86_msi_ops {
@@ -183,11 +182,6 @@ struct x86_msi_ops {u32 (*msix_mask_irq)(struct msi_desc *desc,u32 flag); }; -struct IO_APIC_route_entry ; -struct io_apic_irq_attr ; -struct irq_data ; -struct cpumask ; -struct x86_io_apic_ops {void (*init) (void );unsigned int (*read) (unsigned int apic,unsigned int reg);
Signature · 1 line
1.7.10.4
RFC 13/28 x86: irq_remapping: Clean up unsued code
In reply to Jiang LiuNow we have converted to hierarchy irqdomain, so clean up unused code.
--- arch/x86/include/asm/irq_remapping.h | 23 ---------------------- arch/x86/kernel/apic/vector.c | 1 - drivers/iommu/irq_remapping.c | 36 ---------------------------------- 3 files changed, 60 deletions(-)
arch/x86/include/asm/irq_remapping.h +0 -23
@@ -25,12 +25,7 @@#include <linux/irqdomain.h> #include <asm/io_apic.h> -struct IO_APIC_route_entry ; -struct io_apic_irq_attr ; -struct irq_chip ;struct msi_msg ; -struct pci_dev ; -struct irq_cfg ;struct irq_alloc_info ;#ifdef CONFIG_IRQ_REMAP
@@ -43,13 +38,7 @@ extern int irq_remapping_enable(void);extern void irq_remapping_disable (void );extern int irq_remapping_reenable (int );extern int irq_remap_enable_fault_handling (void ); -extern void free_remapped_irq (int irq);extern void panic_if_irq_remap (const char *msg); -extern bool setup_remapped_irq (int irq, -struct irq_cfg *cfg, -struct irq_chip *chip); - -void irq_remap_modify_chip_defaults (struct irq_chip *chip);extern struct irq_domain *irq_remapping_get_ir_irq_domain (struct irq_alloc_info *info);
@@ -93,23 +82,11 @@ static inline int irq_remapping_enable(void) { return -ENODEV; }static inline void irq_remapping_disable (void ) { }static inline int irq_remapping_reenable (int eim) {return -ENODEV ; }static inline int irq_remap_enable_fault_handling (void ) {return -ENODEV ; } -static inline void free_remapped_irq (int irq) { }static inline void panic_if_irq_remap (const char *msg) { } -static inline void irq_remap_modify_chip_defaults (struct irq_chip *chip) -{ -} - -static inline bool setup_remapped_irq (int irq, -struct irq_cfg *cfg, -struct irq_chip *chip) -{ -return false; -} -static inline struct irq_domain *irq_remapping_get_ir_irq_domain (struct irq_alloc_info *info) {
arch/x86/kernel/apic/vector.c +0 -1
@@ -283,7 +283,6 @@ static void x86_vector_free_irqs(struct irq_domain *domain,for (i =0 ; i < nr_irqs; i++) { irq_data =irq_domain_get_irq_data (x86_vector_domain, virq + i);if (irq_data && irq_data->chip_data) { -free_remapped_irq (virq);clear_irq_vector (virq + i, irq_data->chip_data);free_irq_cfg (irq_data->chip_data);#ifdef CONFIG_X86_IO_APIC
drivers/iommu/irq_remapping.c +0 -36
@@ -25,11 +25,6 @@ int no_x2apic_optout;static struct irq_remap_ops *remap_ops; -static bool irq_remapped (struct irq_cfg *cfg) -{ -return (cfg->remapped ==1 ); -} -static void irq_remapping_disable_io_apic (void ) {/*
@@ -159,17 +154,6 @@ int __init irq_remap_enable_fault_handling(void)return remap_ops->enable_faulting (); } -void free_remapped_irq (int irq) -{ -struct irq_cfg *cfg =irq_cfg (irq); - -if (!remap_ops || !remap_ops->free_irq) -return ; - -if (irq_remapped (cfg)) - remap_ops->free_irq (irq); -} -void panic_if_irq_remap (const char *msg) {if (irq_remapping_enabled)
@@ -194,26 +178,6 @@ void irq_remapping_print_chip(struct irq_data *data, struct seq_file *p)seq_printf (p," %s" , data->chip->name); } -static void ir_print_prefix (struct irq_data *data,struct seq_file *p) -{ -seq_printf (p," IR-%s" , data->chip->name); -} - -void irq_remap_modify_chip_defaults (struct irq_chip *chip) -{ - chip->irq_print_chip = ir_print_prefix; - chip->irq_ack = ir_ack_apic_edge; -} - -bool setup_remapped_irq (int irq,struct irq_cfg *cfg,struct irq_chip *chip) -{ -if (!irq_remapped (cfg)) -return false; -irq_set_status_flags (irq,IRQ_MOVE_PCNTXT ); -irq_remap_modify_chip_defaults (chip); -return true; -} -/** * irq_remapping_get_ir_irq_domain - Get the irqdomain associated the IOMMU * device serving @info
Signature · 1 line
1.7.10.4
RFC 14/28 iommu/vt-d: Clean up unsued code
In reply to Jiang LiuNow we have converted to hierarchy irqdomain, so clean up unused code.
--- drivers/iommu/intel_irq_remapping.c | 186 +---------------------------------- 1 file changed, 1 insertion(+), 185 deletions(-)
drivers/iommu/intel_irq_remapping.c +1 -185
@@ -64,35 +64,6 @@ static DEFINE_RAW_SPINLOCK(irq_2_ir_lock);static int __init parse_ioapics_under_ir (void ); -static struct irq_2_iommu *irq_2_iommu (unsigned int irq) -{ -struct irq_cfg *cfg =irq_cfg (irq); -return cfg ? &cfg->irq_2_iommu :NULL ; -} - -static int get_irte (int irq,struct irte *entry) -{ -struct irq_2_iommu *irq_iommu =irq_2_iommu (irq); -unsigned long flags; -int index; - -if (!entry || !irq_iommu) -return -1 ; - -raw_spin_lock_irqsave (&irq_2_ir_lock, flags); - -if (unlikely (!irq_iommu->iommu)) { -raw_spin_unlock_irqrestore (&irq_2_ir_lock, flags); -return -1 ; - } - - index = irq_iommu->irte_index + irq_iommu->sub_handle; - *entry = *(irq_iommu->iommu->ir_table->base + index); - -raw_spin_unlock_irqrestore (&irq_2_ir_lock, flags); -return 0 ; -} -static int alloc_irte (struct intel_iommu *iommu,int irq,struct irq_2_iommu *irq_iommu,u16 count) {
@@ -230,29 +201,6 @@ static int clear_entries(struct irq_2_iommu *irq_iommu)return qi_flush_iec (iommu, index, irq_iommu->irte_mask); } -static int free_irte (int irq) -{ -struct irq_2_iommu *irq_iommu =irq_2_iommu (irq); -unsigned long flags; -int rc; - -if (!irq_iommu || irq_iommu->iommu ==NULL ) -return -1 ; - -raw_spin_lock_irqsave (&irq_2_ir_lock, flags); - - rc =clear_entries (irq_iommu); - - irq_iommu->iommu =NULL ; - irq_iommu->irte_index =0 ; - irq_iommu->sub_handle =0 ; - irq_iommu->irte_mask =0 ; - -raw_spin_unlock_irqrestore (&irq_2_ir_lock, flags); - -return rc; -} -/* * source validation type */
@@ -878,8 +826,7 @@ error:return -1 ; } -static void prepare_irte (struct irte *irte,int vector, -unsigned int dest) +static void prepare_irte (struct irte *irte,int vector,unsigned int dest) {memset (irte,0 ,sizeof (*irte));
@@ -899,134 +846,6 @@ static void prepare_irte(struct irte *irte, int vector, irte->redir_hint =1 ; } -static int intel_setup_ioapic_entry (int irq, -struct IO_APIC_route_entry *route_entry, -unsigned int destination,int vector, -struct io_apic_irq_attr *attr) -{ -int ioapic_id =mpc_ioapic_id (attr->ioapic); -struct intel_iommu *iommu; -struct IR_IO_APIC_route_entry *entry; -struct irte irte; -int index; - -down_read (&dmar_global_lock); - iommu =map_ioapic_to_ir (ioapic_id); -if (!iommu) { -pr_warn ("No mapping iommu for ioapic %d\n" , ioapic_id); - index = -ENODEV ; - }else { - index =alloc_irte (iommu, irq,irq_2_iommu (irq),1 ); -if (index <0 ) { -pr_warn ("Failed to allocate IRTE for ioapic %d\n" , - ioapic_id); - index = -ENOMEM ; - } - } -up_read (&dmar_global_lock); -if (index <0 ) -return index; - -prepare_irte (&irte, vector, destination); - -/* Set source-id of interrupt request */ -set_ioapic_sid (&irte, ioapic_id); - -modify_irte (irq_2_iommu (irq), &irte); - -apic_printk (APIC_VERBOSE ,KERN_DEBUG "IOAPIC[%d]: " -"Set IRTE entry (P:%d FPD:%d Dst_Mode:%d " -"Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X " -"Avail:%X Vector:%02X Dest:%08X " -"SID:%04X SQ:%X SVT:%X)\n" , - attr->ioapic, irte.present, irte.fpd, irte.dst_mode, - irte.redir_hint, irte.trigger_mode, irte.dlvry_mode, - irte.avail, irte.vector, irte.dest_id, - irte.sid, irte.sq, irte.svt); - - entry = (struct IR_IO_APIC_route_entry *)route_entry; -memset (entry,0 ,sizeof (*entry)); - - entry->index2 = (index >>15 ) &0x1 ; - entry->zero =0 ; - entry->format =1 ; - entry->index = (index &0x7fff ); -/* -* IO-APIC RTE will be configured with virtual vector. -* irq handler will do the explicit EOI to the io-apic. -*/ - entry->vector = attr->ioapic_pin; - entry->mask =0 ;/* enable IRQ */ - entry->trigger = attr->trigger; - entry->polarity = attr->polarity; - -/* Mask level triggered irqs. -* Use IRQ_DELAYED_DISABLE for edge triggered irqs. -*/ -if (attr->trigger) - entry->mask =1 ; - -return 0 ; -} - -/* -* Migrate the IO-APIC irq in the presence of intr-remapping. -* -* For both level and edge triggered, irq migration is a simple atomic -* update(of vector and cpu destination) of IRTE and flush the hardware cache. -* -* For level triggered, we eliminate the io-apic RTE modification (with the -* updated vector information), by using a virtual vector (io-apic pin number). -* Real vector that is used for interrupting cpu will be coming from -* the interrupt-remapping table entry. -* -* As the migration is a simple atomic update of IRTE, the same mechanism -* is used to migrate MSI irq's in the presence of interrupt-remapping. -*/ -static int -intel_ioapic_set_affinity (struct irq_data *data,const struct cpumask *mask, -bool force) -{ -struct irq_cfg *cfg =irqd_cfg (data); -unsigned int dest, irq = data->irq; -struct irte irte; -int err; - -if (get_irte (irq, &irte)) -return -EBUSY ; - - err =assign_irq_vector (irq, cfg, mask); -if (err) -return err; - - err = apic->cpu_mask_to_apicid_and (cfg->domain, mask, &dest); -if (err) { -if (assign_irq_vector (irq, cfg, data->affinity)) -pr_err ("Failed to recover vector for irq %d\n" , irq); -return err; - } - - irte.vector = cfg->vector; - irte.dest_id =IRTE_DEST (dest); - -/* -* Atomically updates the IRTE with the new destination, vector -* and flushes the interrupt entry cache. -*/ -modify_irte (irq_2_iommu (irq), &irte); - -/* -* After this point, all the interrupts will start arriving -* at the new destination. So, time to cleanup the previous -* vector allocation. -*/ -if (cfg->move_in_progress) -send_cleanup_vector (cfg); - -cpumask_copy (data->affinity, mask); -return 0 ; -} -static struct irq_domain *intel_get_ir_irq_domain (struct irq_alloc_info *info) {struct intel_iommu *iommu =NULL ;
@@ -1100,9 +919,6 @@ struct irq_remap_ops intel_irq_remap_ops = { .disable = disable_irq_remapping, .reenable = reenable_irq_remapping, .enable_faulting = enable_drhd_fault_handling, - .setup_ioapic_entry = intel_setup_ioapic_entry, - .set_affinity = intel_ioapic_set_affinity, - .free_irq = free_irte, .get_ir_irq_domain = intel_get_ir_irq_domain, .get_irq_domain = intel_get_irq_domain, .get_ioapic_entry = intel_get_ioapic_entry,
Signature · 1 line
1.7.10.4
RFC 15/28 iommu/amd: Clean up unsued code
In reply to Jiang LiuNow we have converted to hierarchy irqdomain, so clean up unused code.
--- drivers/iommu/amd_iommu.c | 144 --------------------------------------------- 1 file changed, 144 deletions(-)
drivers/iommu/amd_iommu.c +0 -144
@@ -3978,22 +3978,6 @@ out:return index; } -static int get_irte (u16 devid,int index,union irte *irte) -{ -struct irq_remap_table *table; -unsigned long flags; - - table =get_irq_table (devid, false); -if (!table) -return -ENOMEM ; - -spin_lock_irqsave (&table->lock, flags); - irte->val = table->table[index]; -spin_unlock_irqrestore (&table->lock, flags); - -return 0 ; -} -static int modify_irte (u16 devid,int index,union irte irte) {struct irq_remap_table *table;
@@ -4040,131 +4024,6 @@ static void free_irte(u16 devid, int index)iommu_completion_wait (iommu); } -static int setup_ioapic_entry (int irq,struct IO_APIC_route_entry *entry, -unsigned int destination,int vector, -struct io_apic_irq_attr *attr) -{ -struct irq_remap_table *table; -struct irq_2_irte *irte_info; -struct irq_cfg *cfg; -union irte irte; -int ioapic_id; -int index; -int devid; -int ret; - - cfg =irq_cfg (irq); -if (!cfg) -return -EINVAL ; - - irte_info = &cfg->irq_2_irte; - ioapic_id =mpc_ioapic_id (attr->ioapic); - devid =get_ioapic_devid (ioapic_id); - -if (devid <0 ) -return devid; - - table =get_irq_table (devid, true); -if (table ==NULL ) -return -ENOMEM ; - - index = attr->ioapic_pin; - -/* Setup IRQ remapping info */ - cfg->remapped =1 ; - irte_info->devid = devid; - irte_info->index = index; - -/* Setup IRTE for IOMMU */ - irte.val =0 ; - irte.fields.vector = vector; - irte.fields.int_type = apic->irq_delivery_mode; - irte.fields.destination = destination; - irte.fields.dm = apic->irq_dest_mode; - irte.fields.valid =1 ; - - ret =modify_irte (devid, index, irte); -if (ret) -return ret; - -/* Setup IOAPIC entry */ -memset (entry,0 ,sizeof (*entry)); - - entry->vector = index; - entry->mask =0 ; - entry->trigger = attr->trigger; - entry->polarity = attr->polarity; - -/* -* Mask level triggered irqs. -*/ -if (attr->trigger) - entry->mask =1 ; - -return 0 ; -} - -static int set_affinity (struct irq_data *data,const struct cpumask *mask, -bool force) -{ -struct irq_2_irte *irte_info; -unsigned int dest, irq; -struct irq_cfg *cfg; -union irte irte; -int err; - -if (!config_enabled (CONFIG_SMP )) -return -1 ; - - cfg =irqd_cfg (data); - irq = data->irq; - irte_info = &cfg->irq_2_irte; - -if (!cpumask_intersects (mask, cpu_online_mask)) -return -EINVAL ; - -if (get_irte (irte_info->devid, irte_info->index, &irte)) -return -EBUSY ; - -if (assign_irq_vector (irq, cfg, mask)) -return -EBUSY ; - - err = apic->cpu_mask_to_apicid_and (cfg->domain, mask, &dest); -if (err) { -if (assign_irq_vector (irq, cfg, data->affinity)) -pr_err ("AMD-Vi: Failed to recover vector for irq %d\n" , irq); -return err; - } - - irte.fields.vector = cfg->vector; - irte.fields.destination = dest; - -modify_irte (irte_info->devid, irte_info->index, irte); - -if (cfg->move_in_progress) -send_cleanup_vector (cfg); - -cpumask_copy (data->affinity, mask); - -return 0 ; -} - -static int free_irq (int irq) -{ -struct irq_2_irte *irte_info; -struct irq_cfg *cfg; - - cfg =irq_cfg (irq); -if (!cfg) -return -EINVAL ; - - irte_info = &cfg->irq_2_irte; - -free_irte (irte_info->devid, irte_info->index); - -return 0 ; -} -static int get_devid (struct irq_alloc_info *info) {int devid =-1 ;
@@ -4257,9 +4116,6 @@ struct irq_remap_ops amd_iommu_irq_ops = { .disable = amd_iommu_disable, .reenable = amd_iommu_reenable, .enable_faulting = amd_iommu_enable_faulting, - .setup_ioapic_entry = setup_ioapic_entry, - .set_affinity = set_affinity, - .free_irq = free_irq, .get_ir_irq_domain = get_ir_irq_domain, .get_irq_domain = get_irq_domain, .get_ioapic_entry = get_ioapic_entry,
Signature · 1 line
1.7.10.4
RFC 16/28 x86: irq_remapping: Clean up unused interfaces
In reply to Jiang LiuNow we have converted to hierarchy irqdomain, so clean up unused interfaces.
--- drivers/iommu/irq_remapping.h | 16 ---------------- 1 file changed, 16 deletions(-)
drivers/iommu/irq_remapping.h +0 -16
@@ -24,11 +24,7 @@#ifdef CONFIG_IRQ_REMAP -struct IO_APIC_route_entry ; -struct io_apic_irq_attr ;struct irq_data ; -struct cpumask ; -struct pci_dev ;struct msi_msg ;struct irq_domain ;struct irq_alloc_info ;
@@ -58,18 +54,6 @@ struct irq_remap_ops {/* Enable fault handling */ int (*enable_faulting)(void ); -/* IO-APIC setup routine */ -int (*setup_ioapic_entry)(int irq,struct IO_APIC_route_entry *, -unsigned int ,int , -struct io_apic_irq_attr *); - -/* Set the CPU affinity of a remapped interrupt */ -int (*set_affinity)(struct irq_data *data,const struct cpumask *mask, -bool force); - -/* Free an IRQ */ -int (*free_irq)(int ); -struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *);/* Get the MSI irqdomain associated with the IOMMU device */
Signature · 1 line
1.7.10.4
RFC 17/28 x86, irq: Kill irq_cfg.irq_remapped
In reply to Jiang LiuNow there is no user of irq_cfg.irq_remapped, so kill it.
--- arch/x86/include/asm/hw_irq.h | 1 - drivers/iommu/amd_iommu.c | 1 - drivers/iommu/intel_irq_remapping.c | 2 -- 3 files changed, 4 deletions(-)
arch/x86/include/asm/hw_irq.h +0 -1
@@ -185,7 +185,6 @@ struct irq_cfg {u8 vector; u8 move_in_progress : 1; #ifdef CONFIG_IRQ_REMAP - u8 remapped : 1; union { struct irq_2_iommu irq_2_iommu; struct irq_2_irte irq_2_irte;
drivers/iommu/amd_iommu.c +0 -1
@@ -4132,7 +4132,6 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,struct IR_IO_APIC_route_entry *entry = &data->ioapic_entry;struct msi_msg *msg = &data->msi_entry; - irq_cfg->remapped =1 ; data->irq_2_irte.devid = devid; data->irq_2_irte.index = index + sub_handle;
drivers/iommu/intel_irq_remapping.c +0 -2
@@ -68,7 +68,6 @@ static int alloc_irte(struct intel_iommu *iommu, int irq, struct irq_2_iommu *irq_iommu, u16 count) {struct ir_table *table = iommu->ir_table; -struct irq_cfg *cfg =irq_cfg (irq);unsigned int mask =0 ;unsigned long flags;int index;
@@ -95,7 +94,6 @@ static int alloc_irte(struct intel_iommu *iommu, int irq,if (index <0 ) {pr_warn ("IR%d: can't allocate an IRTE\n" , iommu->seq_id); }else { - cfg->remapped =1 ; irq_iommu->iommu = iommu; irq_iommu->irte_index = index; irq_iommu->sub_handle =0 ;
Signature · 1 line
1.7.10.4
RFC 18/28 iommu/vt-d: Move struct irq_2_iommu into intel_irq_remapping.c
In reply to Jiang LiuNow only intel_irq_remapping.c access irq_2_iommu, so move it from hw_irq.h into intel_irq_remapping.c.
--- arch/x86/include/asm/hw_irq.h | 9 --------- drivers/iommu/intel_irq_remapping.c | 7 +++++++ 2 files changed, 7 insertions(+), 9 deletions(-)
arch/x86/include/asm/hw_irq.h +0 -9
@@ -95,14 +95,6 @@ extern void trace_call_function_single_interrupt(void);#endif /* CONFIG_TRACING */ #ifdef CONFIG_IRQ_REMAP -/* Intel specific interrupt remapping information */ -struct irq_2_iommu { - struct intel_iommu *iommu; - u16 irte_index; - u16 sub_handle; - u8 irte_mask; -}; - /* AMD specific interrupt remapping information */ struct irq_2_irte { u16 devid; /* Device ID for IRTE table */
@@ -186,7 +178,6 @@ struct irq_cfg { u8 move_in_progress : 1;#ifdef CONFIG_IRQ_REMAP union { -struct irq_2_iommu irq_2_iommu;struct irq_2_irte irq_2_irte; };#endif
drivers/iommu/intel_irq_remapping.c +7 -0
@@ -32,6 +32,13 @@ struct hpet_scope {unsigned int devfn; }; +struct irq_2_iommu { +struct intel_iommu *iommu; +u16 irte_index; +u16 sub_handle; +u8 irte_mask; +}; +struct intel_ir_data {struct irq_2_iommu irq_2_iommu;struct irte irte_entry;
Signature · 1 line
1.7.10.4
RFC 19/28 iommu/amd: Move struct irq_2_irte into amd_iommu.c
In reply to Jiang LiuNow only amd_iommu.c access irq_2_irte, so move it from hw_irq.h into amd_iommu.c.
--- arch/x86/include/asm/hw_irq.h | 13 ------------- drivers/iommu/amd_iommu.c | 5 +++++ 2 files changed, 5 insertions(+), 13 deletions(-)
arch/x86/include/asm/hw_irq.h +0 -13
@@ -94,14 +94,6 @@ extern void trace_call_function_single_interrupt(void);#define trace_kvm_posted_intr_ipi kvm_posted_intr_ipi#endif /* CONFIG_TRACING */ -#ifdef CONFIG_IRQ_REMAP -/* AMD specific interrupt remapping information */ -struct irq_2_irte { -u16 devid;/* Device ID for IRTE table */ -u16 index;/* Index into IRTE table*/ -}; -#endif /* CONFIG_IRQ_REMAP */ -struct irq_domain ;#ifdef CONFIG_X86_LOCAL_APIC struct irq_data ;
@@ -176,11 +168,6 @@ struct irq_cfg {unsigned int dest_apicid;u8 vector; u8 move_in_progress : 1; -#ifdef CONFIG_IRQ_REMAP -union { -struct irq_2_irte irq_2_irte; - }; -#endif union { #ifdef CONFIG_X86_IO_APIC struct {
drivers/iommu/amd_iommu.c +5 -0
@@ -3836,6 +3836,11 @@ union irte { } fields; }; +struct irq_2_irte { +u16 devid;/* Device ID for IRTE table */ +u16 index;/* Index into IRTE table*/ +}; +struct amd_ir_data {struct irq_2_irte irq_2_irte;union irte irte_entry;
Signature · 1 line
1.7.10.4
RFC 20/28 x86, irq: Move irq_cfg.irq_2_pin into io_apic.c
In reply to Jiang LiuNow only io_apic.c accesses struct irq_cfg.irq_2_pin, so move irq_2_pin into struct mp_chip_data in io_apic.c to clean up struct irq_cfg further.
--- arch/x86/include/asm/hw_irq.h | 7 -- arch/x86/kernel/apic/io_apic.c | 175 +++++++++++++++++++--------------------- arch/x86/kernel/apic/vector.c | 3 - 3 files changed, 82 insertions(+), 103 deletions(-)
arch/x86/include/asm/hw_irq.h +0 -7
@@ -168,13 +168,6 @@ struct irq_cfg {unsigned int dest_apicid;u8 vector; u8 move_in_progress : 1; -union { -#ifdef CONFIG_X86_IO_APIC -struct { -struct list_head irq_2_pin; - }; -#endif - }; };extern struct irq_domain *x86_vector_domain;
arch/x86/kernel/apic/io_apic.c +82 -93
465 lines not on this page · raw message
arch/x86/kernel/apic/vector.c +0 -3
@@ -68,9 +68,6 @@ static struct irq_cfg *alloc_irq_cfg(int node) goto out_cfg;if (!zalloc_cpumask_var_node (&cfg->old_domain,GFP_KERNEL , node)) goto out_domain; -#ifdef CONFIG_X86_IO_APIC -INIT_LIST_HEAD (&cfg->irq_2_pin); -#endif return cfg; out_domain:free_cpumask_var (cfg->domain);
Signature · 1 line
1.7.10.4
RFC 21/28 x86, irq: Kill struct io_apic_irq_attr
In reply to Jiang LiuNow there's no user of struct io_apic_irq_attr anymore, so kill it.
--- arch/x86/include/asm/io_apic.h | 7 ------- arch/x86/kernel/apic/io_apic.c | 10 ---------- 2 files changed, 17 deletions(-)
arch/x86/include/asm/io_apic.h +0 -7
@@ -157,13 +157,6 @@ extern int restore_ioapic_entries(void);extern void setup_ioapic_ids_from_mpc (void );extern void setup_ioapic_ids_from_mpc_nocheck (void ); -struct io_apic_irq_attr { -int ioapic; -int ioapic_pin; -int trigger; -int polarity; -}; -enum ioapic_domain_type {IOAPIC_DOMAIN_INVALID ,IOAPIC_DOMAIN_LEGACY ,
arch/x86/kernel/apic/io_apic.c +0 -10
@@ -2953,16 +2953,6 @@ int mp_ioapic_registered(u32 gsi_base)return 0 ; } -static inline void set_io_apic_irq_attr (struct io_apic_irq_attr *irq_attr, -int ioapic,int ioapic_pin, -int trigger,int polarity) -{ - irq_attr->ioapic = ioapic; - irq_attr->ioapic_pin = ioapic_pin; - irq_attr->trigger = trigger; - irq_attr->polarity = polarity; -} -static int mp_irqdomain_get_attr (int irq,u32 gsi,struct mp_pin_info *pinfo,struct irq_alloc_info *info) {
Signature · 1 line
1.7.10.4
RFC 22/28 x86, irq: Kill x86_io_apic_ops.write and x86_io_apic_ops.modify
In reply to Jiang Liux86_io_apic_ops.write is always set to native_io_apic_write(), and nobody overrides it. So get rid of the indirection by changing native_io_apic_write() as io_apic_write() and killing x86_io_apic_ops.write.
Do the same for x86_io_apic_ops.modify and native_io_apic_modify().
--- arch/x86/include/asm/io_apic.h | 13 ------------- arch/x86/include/asm/x86_init.h | 2 -- arch/x86/kernel/apic/io_apic.c | 6 ++++-- arch/x86/kernel/x86_init.c | 2 -- 4 files changed, 4 insertions(+), 19 deletions(-)
arch/x86/include/asm/io_apic.h +0 -13
@@ -209,8 +209,6 @@ extern void disable_ioapic_support(void);extern void __init native_io_apic_init_mappings (void );extern unsigned int native_io_apic_read (unsigned int apic,unsigned int reg); -extern void native_io_apic_write (unsigned int apic,unsigned int reg,unsigned int val); -extern void native_io_apic_modify (unsigned int apic,unsigned int reg,unsigned int val);extern void native_disable_io_apic (void );static inline unsigned int io_apic_read (unsigned int apic,unsigned int reg)
@@ -218,15 +216,6 @@ static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)return x86_io_apic_ops.read (apic, reg); } -static inline void io_apic_write (unsigned int apic,unsigned int reg,unsigned int value) -{ - x86_io_apic_ops.write (apic, reg, value); -} -static inline void io_apic_modify (unsigned int apic,unsigned int reg,unsigned int value) -{ - x86_io_apic_ops.modify (apic, reg, value); -} -extern void setup_IO_APIC (void );extern void enable_IO_APIC (void );extern void disable_IO_APIC (void );
@@ -268,8 +257,6 @@ static inline void mp_save_irq(struct mpc_intsrc *m) { };static inline void disable_ioapic_support (void ) { }#define native_io_apic_init_mappings NULL#define native_io_apic_read NULL -#define native_io_apic_write NULL -#define native_io_apic_modify NULL#define native_disable_io_apic NULL#endif
arch/x86/include/asm/x86_init.h +0 -2
@@ -185,8 +185,6 @@ struct x86_msi_ops {struct x86_io_apic_ops {void (*init) (void );unsigned int (*read) (unsigned int apic,unsigned int reg); -void (*write) (unsigned int apic,unsigned int reg,unsigned int value); -void (*modify) (unsigned int apic,unsigned int reg,unsigned int value);void (*disable)(void ); };
arch/x86/kernel/apic/io_apic.c +4 -2
@@ -299,7 +299,8 @@ unsigned int native_io_apic_read(unsigned int apic, unsigned int reg)return readl (&io_apic->data); } -void native_io_apic_write (unsigned int apic,unsigned int reg,unsigned int value) +static void io_apic_write (unsigned int apic,unsigned int reg, +unsigned int value) {struct io_apic __iomem *io_apic =io_apic_base (apic);
@@ -313,7 +314,8 @@ void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int valu* * Older SiS APIC requires we rewrite the index register */ -void native_io_apic_modify (unsigned int apic,unsigned int reg,unsigned int value) +static void io_apic_modify (unsigned int apic,unsigned int reg, +unsigned int value) {struct io_apic __iomem *io_apic =io_apic_base (apic);
arch/x86/kernel/x86_init.c +0 -2
@@ -151,7 +151,5 @@ u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)struct x86_io_apic_ops x86_io_apic_ops = { .init = native_io_apic_init_mappings, .read = native_io_apic_read, - .write = native_io_apic_write, - .modify = native_io_apic_modify, .disable = native_disable_io_apic, };
Signature · 1 line
1.7.10.4
RFC 23/28 x86, irq: Clean up io_apic.h
In reply to Jiang LiuClean up io_apic.h by:
1) moving definition of struct mp_ioapic_gsi into io_apic.c
2) changing mp_pin_to_gsi() and mp_ioapic_gsi_routing() as static
3) killing unused MP_MAX_IOAPIC_PIN
4) killing useless forward declaration
--- arch/x86/include/asm/io_apic.h | 14 ++------------ arch/x86/kernel/apic/io_apic.c | 9 +++++++-- 2 files changed, 9 insertions(+), 14 deletions(-)
arch/x86/include/asm/io_apic.h +2 -12
@@ -113,9 +113,6 @@ extern int nr_ioapics;extern int mpc_ioapic_id (int ioapic);extern unsigned int mpc_ioapic_addr (int ioapic); -extern struct mp_ioapic_gsi *mp_ioapic_gsi_routing (int ioapic); - -#define MP_MAX_IOAPIC_PIN 127/* # of MP IRQ source entries */ extern int mp_irq_entries;
@@ -135,6 +132,8 @@ extern int noioapicquirk;/* -1 if "noapic" boot option passed */ extern int noioapicreroute; +extern u32 gsi_top; +extern unsigned long io_apic_irqs;#define IO_APIC_IRQ (x) (((x) >= NR_IRQS_LEGACY) || ((1 << (x)) & io_apic_irqs))
@@ -146,7 +145,6 @@ extern unsigned long io_apic_irqs;#define io_apic_assign_pci_irqs \ (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs) -struct irq_cfg ;extern void ioapic_insert_resources (void );extern int arch_early_ioapic_init (void );
@@ -174,15 +172,8 @@ struct ioapic_domain_cfg {struct device_node *dev; }; -struct mp_ioapic_gsi { -u32 gsi_base; -u32 gsi_end; -}; -extern u32 gsi_top; -extern int mp_find_ioapic (u32 gsi);extern int mp_find_ioapic_pin (int ioapic,u32 gsi); -extern u32 mp_pin_to_gsi (int ioapic,int pin);extern int mp_map_gsi_to_irq (u32 gsi,unsigned int flags,struct irq_alloc_info *info);extern void mp_unmap_irq (int irq);
@@ -232,7 +223,6 @@ static inline int arch_early_ioapic_init(void) { return 0; }static inline void print_IO_APICs (void ) {}#define gsi_top (NR_IRQS_LEGACY)static inline int mp_find_ioapic (u32 gsi) {return 0 ; } -static inline u32 mp_pin_to_gsi (int ioapic,int pin) {return UINT_MAX ; }static inline int mp_map_gsi_to_irq (u32 gsi,unsigned int flags,struct irq_alloc_info *info) {
arch/x86/kernel/apic/io_apic.c +7 -2
@@ -98,6 +98,11 @@ struct mp_pin_info {u32 count; }; +struct mp_ioapic_gsi { +u32 gsi_base; +u32 gsi_end; +}; + static struct ioapic { /* * # of IRQ routing registers
@@ -129,7 +134,7 @@ unsigned int mpc_ioapic_addr(int ioapic_idx)return ioapics[ioapic_idx].mp_config.apicaddr; } -struct mp_ioapic_gsi *mp_ioapic_gsi_routing (int ioapic_idx) +static struct mp_ioapic_gsi *mp_ioapic_gsi_routing (int ioapic_idx) {return &ioapics[ioapic_idx].gsi_config; }
@@ -141,7 +146,7 @@ static inline int mp_ioapic_pin_count(int ioapic)return gsi_cfg->gsi_end - gsi_cfg->gsi_base +1 ; } -u32 mp_pin_to_gsi (int ioapic,int pin) +static u32 mp_pin_to_gsi (int ioapic,int pin) {return mp_ioapic_gsi_routing (ioapic)->gsi_base + pin; }
Signature · 1 line
1.7.10.4
RFC 24/28 x86, irq: Kill unused alloc_irq_and_cfg_at()
In reply to Jiang LiuThere's no caller of alloc_irq_and_cfg_at() anymore, so kill it.
--- arch/x86/include/asm/hw_irq.h | 1 - arch/x86/kernel/apic/vector.c | 21 --------------------- 2 files changed, 22 deletions(-)
arch/x86/include/asm/hw_irq.h +0 -1
@@ -178,7 +178,6 @@ extern void copy_irq_alloc_info(struct irq_alloc_info *dst, struct irq_alloc_info *src);extern struct irq_cfg *irq_cfg (unsigned int irq);extern struct irq_cfg *irqd_cfg (struct irq_data *irq_data); -extern struct irq_cfg *alloc_irq_and_cfg_at (unsigned int at,int node);extern void lock_vector_lock (void );extern void unlock_vector_lock (void );extern int assign_irq_vector (int ,struct irq_cfg *,const struct cpumask *);
arch/x86/kernel/apic/vector.c +0 -21
@@ -76,27 +76,6 @@ out_cfg:return NULL ; } -struct irq_cfg *alloc_irq_and_cfg_at (unsigned int at,int node) -{ -int res =irq_alloc_desc_at (at, node); -struct irq_cfg *cfg; - -if (res <0 ) { -if (res != -EEXIST ) -return NULL ; - cfg =irq_cfg (at); -if (cfg) -return cfg; - } - - cfg =alloc_irq_cfg (node); -if (cfg) -irq_set_chip_data (at, cfg); -else -irq_free_desc (at); -return cfg; -} -static void free_irq_cfg (struct irq_cfg *cfg) {if (cfg) {
Signature · 1 line
1.7.10.4
RFC 25/28 x86, irq: Change functions only used in vector.c as static
In reply to Jiang LiuFunction {assign|clear}_irq_vector() and apic_retrigger_irq() are only used in file vector.c, so change them as static.
--- arch/x86/include/asm/hw_irq.h | 3 --- arch/x86/kernel/apic/vector.c | 7 ++++--- 2 files changed, 4 insertions(+), 6 deletions(-)
arch/x86/include/asm/hw_irq.h +0 -3
@@ -180,13 +180,10 @@ extern struct irq_cfg *irq_cfg(unsigned int irq);extern struct irq_cfg *irqd_cfg (struct irq_data *irq_data);extern void lock_vector_lock (void );extern void unlock_vector_lock (void ); -extern int assign_irq_vector (int ,struct irq_cfg *,const struct cpumask *); -extern void clear_irq_vector (int irq,struct irq_cfg *cfg);extern void setup_vector_irq (int cpu);extern void send_cleanup_vector (struct irq_cfg *);extern void irq_complete_move (struct irq_cfg *cfg); -extern int apic_retrigger_irq (struct irq_data *data);extern void apic_ack_edge (struct irq_data *data);extern int apic_set_affinity (struct irq_data *data,const struct cpumask *mask,unsigned int *dest_id);
arch/x86/kernel/apic/vector.c +4 -3
@@ -185,7 +185,8 @@ next:return err; } -int assign_irq_vector (int irq,struct irq_cfg *cfg,const struct cpumask *mask) +static int assign_irq_vector (int irq,struct irq_cfg *cfg, +const struct cpumask *mask) {int err;unsigned long flags;
@@ -196,7 +197,7 @@ int assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)return err; } -void clear_irq_vector (int irq,struct irq_cfg *cfg) +static void clear_irq_vector (int irq,struct irq_cfg *cfg) {int cpu, vector;unsigned long flags;
@@ -435,7 +436,7 @@ void setup_vector_irq(int cpu)__setup_vector_irq (cpu); } -int apic_retrigger_irq (struct irq_data *data) +static int apic_retrigger_irq (struct irq_data *data) {struct irq_cfg *cfg =irqd_cfg (data);unsigned long flags;
Signature · 1 line
1.7.10.4
RFC 26/28 x86, irq: Kill function apic_set_affinity()
In reply to Jiang LiuNow there's no user of apic_set_affinity(), so kill it.
Also rename vector_set_affinity() to apic_set_affinity() for consistency.
--- arch/x86/include/asm/hw_irq.h | 2 -- arch/x86/kernel/apic/vector.c | 40 +++------------------------------------- 2 files changed, 3 insertions(+), 39 deletions(-)
arch/x86/include/asm/hw_irq.h +0 -2
@@ -185,8 +185,6 @@ extern void send_cleanup_vector(struct irq_cfg *);extern void irq_complete_move (struct irq_cfg *cfg);extern void apic_ack_edge (struct irq_data *data); -extern int apic_set_affinity (struct irq_data *data,const struct cpumask *mask, -unsigned int *dest_id);#else /* CONFIG_X86_LOCAL_APIC */ static inline void lock_vector_lock (void ) {}static inline void unlock_vector_lock (void ) {}
arch/x86/kernel/apic/vector.c +3 -37
@@ -457,42 +457,8 @@ void apic_ack_edge(struct irq_data *data)ack_APIC_irq (); } -/* -* Either sets data->affinity to a valid value, and returns -* ->cpu_mask_to_apicid of that in dest_id, or returns -1 and -* leaves data->affinity untouched. -*/ -int apic_set_affinity (struct irq_data *data,const struct cpumask *mask, -unsigned int *dest_id) -{ -struct irq_cfg *cfg =irqd_cfg (data); -unsigned int irq = data->irq; -int err; - -if (!config_enabled (CONFIG_SMP )) -return -EPERM ; - -if (!cpumask_intersects (mask, cpu_online_mask)) -return -EINVAL ; - - err =assign_irq_vector (irq, cfg, mask); -if (err) -return err; - - err = apic->cpu_mask_to_apicid_and (mask, cfg->domain, dest_id); -if (err) { -if (assign_irq_vector (irq, cfg, data->affinity)) -pr_err ("Failed to recover vector for irq %d\n" , irq); -return err; - } - -cpumask_copy (data->affinity, mask); - -return 0 ; -} - -static int vector_set_affinity (struct irq_data *irq_data, -const struct cpumask *dest,bool force) +static int apic_set_affinity (struct irq_data *irq_data, +const struct cpumask *dest,bool force) {int err;int irq = irq_data->irq;
@@ -518,7 +484,7 @@ static int vector_set_affinity(struct irq_data *irq_data,static struct irq_chip vector_chip = { .irq_ack = apic_ack_edge, - .irq_set_affinity = vector_set_affinity, + .irq_set_affinity = apic_set_affinity, .irq_retrigger = apic_retrigger_irq, };
Signature · 1 line
1.7.10.4
RFC 27/28 x86, irq: Introduce mechanism to support different vector allocation policies
In reply to Jiang LiuIntroduce mechanism to support different vector allocation policies, so platform or user may choose the best suitable CPU vector allocation policy. Currently two policies are supported:
1) allocate CPU vector from cpumask_of_node(dev_to_node(dev))
2) allocate from apic->target_cpus(), this is the default policy
Platform driver may call set_vector_alloc_policy() to choose the preferred policies.
This mechanism may be used to support NumaConnect systems to allocate CPU vectors from device local node.
We may also enhance to support per-cpu vector allocation if it's needed.
--- arch/x86/include/asm/hw_irq.h | 12 ++++++++ arch/x86/kernel/apic/vector.c | 66 +++++++++++++++++++++++++++++++++++------ 2 files changed, 69 insertions(+), 9 deletions(-)
arch/x86/include/asm/hw_irq.h +12 -0
@@ -162,6 +162,17 @@ struct irq_alloc_info { }; }; +enum { +/* Allocate vector from cpumask_of_node(dev_to_node(dev)) */ +X86_VECTOR_POL_NODE =0x1 , +/* Allocate vector from apic->target_cpus() */ +X86_VECTOR_POL_DEFAULT =0x2 , +/* Allocate vector from cpumask assigned by caller */ +X86_VECTOR_POL_CALLER =0x4 , +X86_VECTOR_POL_MIN =X86_VECTOR_POL_NODE , +X86_VECTOR_POL_MAX =X86_VECTOR_POL_CALLER , +}; +struct irq_cfg {cpumask_var_t domain;cpumask_var_t old_domain;
@@ -180,6 +191,7 @@ extern struct irq_cfg *irq_cfg(unsigned int irq);extern struct irq_cfg *irqd_cfg (struct irq_data *irq_data);extern void lock_vector_lock (void );extern void unlock_vector_lock (void ); +extern void set_vector_alloc_policy (unsigned int policy);extern void setup_vector_irq (int cpu);extern void send_cleanup_vector (struct irq_cfg *);extern void irq_complete_move (struct irq_cfg *cfg);
arch/x86/kernel/apic/vector.c +57 -9
106 lines not on this page · raw message
Signature · 1 line
1.7.10.4
RFC 28/28 x86, irq: Add kernel parameter vector_alloc to set CPU vector allocation policy
In reply to Jiang LiuParameter vector_alloc should be set to an integer with:
bit 0: enable allocating CPU vector from CPUs on device local node.
That's to allocate from cpumask_of_node(irq_data->node).
bit 1: enable the default policy, which is to allocate from
apic->target_cpus().When allocating vectors, it tries all enabled policies from lower bit position to higher bit position.
This option could be use to optimize interrupt distribution on large system such as NumaChip etc.
--- Documentation/kernel-parameters.txt | 6 ++++++ arch/x86/kernel/apic/vector.c | 11 +++++++++++ 2 files changed, 17 insertions(+)
Documentation/kernel-parameters.txt +6 -0
@@ -3586,6 +3586,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. vector= [IA-64,SMP] vector=percpu: enable percpu vector domain + vector_alloc= [x86,SMP] + vector_alloc=policy: policy is a bitmap, bit 0 + for allocating CPU vector from CPUs on device local + node; bit 1 for the default policy to allocating from + apic->target_cpus(). All higher bits are reserved. + video= [FB] Frame buffer configuration See Documentation/fb/modedb.txt.
arch/x86/kernel/apic/vector.c +11 -0
@@ -65,6 +65,17 @@ void set_vector_alloc_policy(unsigned int policy) x86_vector_alloc_policy = policy |X86_VECTOR_POL_CALLER ; } +static int __init apic_parse_vector_policy (char *str) +{ +int policy; + +if (get_option (&str, &policy) ==1 ) +set_vector_alloc_policy (policy); + +return 1 ; +} +__setup ("vector_alloc=" , apic_parse_vector_policy); +static struct irq_cfg *alloc_irq_cfg (int node) {struct irq_cfg *cfg;
Signature · 1 line
1.7.10.4