Problem with autofs and ldap
Hello,
I have a very weird issue that maybe someone sounds familiar. I have placed our automount entry's in our Active Directory / LDAP. Problem is that is it not stable. After a restart of autofs I sometimes only see half of our map entry's. Sometimes 75 %.
When I do a autofs reload maybe 90 % of the time I see all entry's. I am having this issue on Redhat 6 and Suse 11. Strange thing is that the autofs logging (debug) shows always all the entry's but are not reflected in the filesystem structure.
This is my config :
/etc/sysconfig/autofs
----
LDAP_URI="ldap://srvxxx.domain.net/" SEARCH_BASE="ou=LinuxAutoMount,ou=Resources,dc=domain,dc=net" LDAP_TIMEOUT="100"
LDAP_NETWORK_TIMEOUT="100"
MAP_HASH_TABLE_SIZE=2048
/etc/autofs_ldap_auth.conf
----
<autofs_ldap_sasl_conf
usetls="no"
tlsrequired="no"
authrequired="yes"
authtype="GSSAPI"
clientprinc="nfs/[email protected]"/>
/etc/nsswitch.conf
----
automount: files ldap
Greetings, Richard Smits
Signature · 12 lines
R. (Richard) Smits Systeembeheerder TU Delft / Shared Service centre ICT Landbergstraat 15, 2628CE Delft Kamer: C-2-520 Postbus 354, 2600AJ Delft T +31 (0)15 27 87312 F +31 (0)15 27 83787 E [email protected] I www.ssc-ict.tudelft.nl/pdc aanwezig: maandag t/m donderdag
Ian Kent
maintainerQuoted 6 lines · rsmits-l
Hello,
I have a very weird issue that maybe someone sounds familiar. I have placed our automount entry's in our Active Directory / LDAP. Problem is that is it not stable. After a restart of autofs I sometimes only see half of our map entry's. Sometimes 75 %.
That's odd if the map is actually being read, yes.
At one time autofs didn't do paged ldap reads so AD would only send one page which meant not all the entries would be read for larger maps.
Quoted 5 lines
When I do a autofs reload maybe 90 % of the time I see all entry's. I am having this issue on Redhat 6 and Suse 11. Strange thing is that the autofs logging (debug) shows always all the entry's but are not reflected in the filesystem structure.
I can't remember now what gets logged for the ldap map reads so how have you established the read gets all the entries (and what rel6 version of autofs are you using)?
Quoted 10 lines
This is my config :
/etc/sysconfig/autofs
----
LDAP_URI="ldap://srvxxx.domain.net/" SEARCH_BASE="ou=LinuxAutoMount,ou=Resources,dc=domain,dc=net" LDAP_TIMEOUT="100"
LDAP_NETWORK_TIMEOUT="100"
MAP_HASH_TABLE_SIZE=2048
OK, so BROWSE_MODE isn't set so it = yes by default and you expect the mount point directories within what are probably indirect mounts to be created or removed, as the case may be, correct?
But they aren't all being created (or removed)?
Quoted 10 lines
/etc/autofs_ldap_auth.conf
----
<autofs_ldap_sasl_confusetls="no" tlsrequired="no" authrequired="yes" authtype="GSSAPI" clientprinc="nfs/[email protected]"/>
Don't think this makes any difference since if auth was failing I don't think you would get any entries.
Quoted 4 lines
/etc/nsswitch.conf
----
automount: files ldap
This might make a difference, depending on what file maps exist, but we would need a debug log and map examples to reproduce the problem.
What about logging a bug against rhel-6 and working on it there.
Ian
Quoted 12 lines · Ian Kent
Quoted 6 lines · rsmits-l
Hello,
I have a very weird issue that maybe someone sounds familiar. I have placed our automount entry's in our Active Directory / LDAP. Problem is that is it not stable. After a restart of autofs I sometimes only see half of our map entry's. Sometimes 75 %.
That's odd if the map is actually being read, yes.
At one time autofs didn't do paged ldap reads so AD would only send one page which meant not all the entries would be read for larger maps.
Yes, the paged ldap story crossed my screen when I was googling for this problem.
Quoted 9 lines
Quoted 5 lines
When I do a autofs reload maybe 90 % of the time I see all entry's. I am having this issue on Redhat 6 and Suse 11. Strange thing is that the autofs logging (debug) shows always all the entry's but are not reflected in the filesystem structure.
I can't remember now what gets logged for the ldap map reads so how have you established the read gets all the entries (and what rel6 version of autofs are you using)?
The read gets all the entry's but just doesn't show it in the directory structure. I am having this issue on Redhat 6.5 (autofs 5.0.5-89)
On Suse Enterprise Desktop 11.3 : (autofs-5.0.6-3.10.16.1)
Quoted 12 lines
Quoted 11 lines
This is my config :
/etc/sysconfig/autofs
----
LDAP_URI="ldap://srvxxx.domain.net/" SEARCH_BASE="ou=LinuxAutoMount,ou=Resources,dc=domain,dc=net" LDAP_TIMEOUT="100"
LDAP_NETWORK_TIMEOUT="100"
MAP_HASH_TABLE_SIZE=2048
Quoted 5 lines
OK, so
BROWSE_MODEisn't set so it = yes by default and you expect the mount point directories within what are probably indirect mounts to be created or removed, as the case may be, correct?But they aren't all being created (or removed)?
That's right.
Quoted 10 lines
Quoted 3 lines
/etc/nsswitch.conf
----
automount: files ldapThis might make a difference, depending on what file maps exist, but we would need a debug log and map examples to reproduce the problem.
What about logging a bug against rhel-6 and working on it there.
Ian
That's what I was thinking. This really looks like a bug. I will post my finding to you and the list when this is solved.
Greetings, Richard Smits.
Ian Kent
maintainerQuoted 7 lines · rsmits-l
Quoted 4 lines
What about logging a bug against rhel-6 and working on it there.
Ian
That's what I was thinking. This really looks like a bug. I will post my finding to you and the list when this is solved.
If you have a subscription then I'd recommend going via GSS since Bugzilla bugs have the lowest priority for Engineering, bugs that come via GSS and other support folks using the recommended process get first priority. But of course you need to convince GSS the problem should be escalated.
Ian
Ian Kent
maintainerQuoted 7 lines · rsmits-l
Quoted 7 lines
Quoted 6 lines
When I do a autofs reload maybe 90 % of the time I see all entry's. I am having this issue on Redhat 6 and Suse 11. Strange thing is that the autofs logging (debug) shows always all the entry's but are not reflected in the filesystem structure.
Quoted 6 lines
Quoted 3 lines
I can't remember now what gets logged for the ldap map reads so how have you established the read gets all the entries (and what rel6 version of autofs are you using)?
The read gets all the entry's but just doesn't show it in the directory structure. I am having this issue on Redhat 6.5 (autofs 5.0.5-89)
It might be worth checking if the current rhel-6.5 release helps, if you have access to it.
* Thu May 15 2014 Ian Kent <[email protected]> - 5.0.5-89.el6_5.2
- bz1089889 - autofs can ghost non-existent map entries given the right timing
- fix use cache entry after free in lookup_prune_one_cache().
- check for non existent negative entries in lookup_ghost().
- Resolves: rhbz#1089889
* Thu Feb 27 2014 Ian Kent <[email protected]> - 5.0.5-89.el6_5.1
- bz1067774 - autofs-5.0.5-88.el6 breaks maps that have a -v in the options
- fix fix options compare.
- Related: rhbz#1067774
* Fri Feb 21 2014 Ian Kent <[email protected]> - 5.0.5-89
- bz1067774 - autofs-5.0.5-88.el6 breaks maps that have a -v in the options
- fix options compare.
- Resolves: rhbz#1067774
Ian