ARM: dts: k2e-mvm: add 1g ethernet phys nodes
PATCH 1/2 ARM: dts: k2e-mvm: add 1g ethernet phys nodes
Keystone K2E-EVM has two 1G Marvell 88E1514 Ethernet PHYs installed, which are compatible with 88E1510. Hence, add corresponding child nodes for 1G MDIO bus.
For more information see:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
--- arch/arm/boot/dts/k2e-evm.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/boot/dts/k2e-evm.dts +12 -0
@@ -139,3 +139,15 @@ }; }; }; + +&mdio { + ethphy0: ethernet-phy at 0 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy at 1 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +};
Signature · 1 line
1.9.1
PATCH 2/2 ARM: dts: k2l-mvm: add 1g ethernet phys nodes
Keystone K2L-EVM has two 1G Marvell 88E1514 Ethernet PHYs installed, which are compatible with 88E1510. Hence, add corresponding child nodes for 1G MDIO bus.
For more information see:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
--- arch/arm/boot/dts/k2l-evm.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/boot/dts/k2l-evm.dts +12 -0
@@ -116,3 +116,15 @@ }; }; }; + +&mdio { + ethphy0: ethernet-phy at 0 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy at 1 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +};
Signature · 1 line
1.9.1
PATCH 2/2 ARM: dts: k2l-mvm: add 1g ethernet phys nodes
Quoted 22 lines · Grygorii Strashko
Keystone K2L-EVM has two 1G Marvell 88E1514 Ethernet PHYs installed, which are compatible with 88E1510. Hence, add corresponding child nodes for 1G MDIO bus.
For more information see:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.htmlSigned-off-by Grygorii Strashko<[email protected]>--- arch/arm/boot/dts/k2l-evm.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)arch/arm/boot/dts/k2l-evm.dts +2
-0@@ -116,3 +116,15 @@ }; }; }; + +&mdio {
arch/arm/boot/dts/k2l-evm.dts line 130
Quoted 10 lines
arch/arm/boot/dts/k2l-evm.dts +10
-0+ ethphy0: ethernet-phy at 0 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg =<0>; + }; + + ethphy1: ethernet-phy at 1 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg =<1>; + }; +};
In the subject do s/k2l-mvm/k2l-evm/
Signature · 2 lines
Murali Karicheri Linux Kernel, Texas Instruments
PATCH 1/2 ARM: dts: k2e-mvm: add 1g ethernet phys nodes
In reply to Grygorii StrashkoQuoted 22 lines · Grygorii Strashko
Keystone K2E-EVM has two 1G Marvell 88E1514 Ethernet PHYs installed, which are compatible with 88E1510. Hence, add corresponding child nodes for 1G MDIO bus.
For more information see:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.htmlSigned-off-by Grygorii Strashko<[email protected]>--- arch/arm/boot/dts/k2e-evm.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)arch/arm/boot/dts/k2e-evm.dts +2
-0@@ -139,3 +139,15 @@ }; }; }; + +&mdio {
arch/arm/boot/dts/k2e-evm.dts line 153
Quoted 10 lines
arch/arm/boot/dts/k2e-evm.dts +10
-0+ ethphy0: ethernet-phy at 0 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg =<0>; + }; + + ethphy1: ethernet-phy at 1 { + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; + reg =<1>; + }; +};
In the subject do s/k2e-mvm/k2e-evm/
Signature · 2 lines
Murali Karicheri Linux Kernel, Texas Instruments