Skip to contentSkip to conversation

ARM: keystone_defconfig: enable dsp irq and gpio support

PATCH New Grygorii Strashko 3 participants 6 messages Oct 20, 2014 – Oct 22, 2014 Arm (32-bit)

lore
Share & tools
lore

Grygorii Strashko

author
#0 lore raw

PATCH 1/2 ARM: keystone_defconfig: enable dsp irq and gpio support

Enable DSP IRQ controller and GPIOs support for Keystone 2.

Signed-off-by Grygorii Strashko <[email protected]>
---
 arch/arm/configs/keystone_defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/configs/keystone_defconfig +2 -0
index 932ae40..c9b0d1b 100644
@@ -194,3 +194,5 @@ CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_KEYSTONE_IRQ=y
+CONFIG_GPIO_SYSCON=y
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH 2/2 ARM: keystone_defconfig: enable mdio and marvell eth phys

Enable MDIO support for Keystone 2 SoCs and also enable Marvell Ethernet PHYs support for Keystone 2 K2H EVM which has two 1G Marvell 88E1111-B2 PHYs installed.

For more information see:
- http://www.advantech.com/Support/TI-EVM/EVMK2HX.aspx

Signed-off-by Grygorii Strashko <[email protected]>
---
 arch/arm/configs/keystone_defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/configs/keystone_defconfig +2 -0
index c9b0d1b..4c799b5 100644
@@ -196,3 +196,5 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_GPIO_SYSCON=y
+CONFIG_TI_DAVINCI_MDIO=y
+CONFIG_MARVELL_PHY=y
Signature · 1 line
1.9.1
#2 lore raw

PATCH 1/2 ARM: keystone_defconfig: enable dsp irq and gpio support

In reply to Grygorii Strashko
Quoted 13 lines · Grygorii Strashko

Enable DSP IRQ controller and GPIOs support for Keystone 2.

Signed-off-by Grygorii Strashko <[email protected]>
---
  arch/arm/configs/keystone_defconfig | 2 ++
  1 file changed, 2 insertions(+)
arch/arm/configs/keystone_defconfig +0 -0
index 932ae40..c9b0d1b 100644

arch/arm/configs/keystone_defconfig CONFIG_LEDS_TRIGGER_ONESHOT=y · line 198

Quoted 5 lines
arch/arm/configs/keystone_defconfig +2 -0
@@ -194,3 +194,5 @@ CONFIG_LEDS_TRIGGER_ONESHOT=y
  CONFIG_LEDS_TRIGGER_HEARTBEAT=y
  CONFIG_LEDS_TRIGGER_BACKLIGHT=y
  CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_KEYSTONE_IRQ=y
+CONFIG_GPIO_SYSCON=y

I will pick this one along with other three
patches for next merge window.

Thanks !!

Regards,
Santosh

#3 lore raw

PATCH 1/2 ARM: keystone_defconfig: enable dsp irq and gpio support

Quoted 23 lines · Santosh Shilimkar
Quoted 17 lines · Grygorii Strashko

Enable DSP IRQ controller and GPIOs support for Keystone 2.

Signed-off-by Grygorii Strashko <[email protected]>

---
arch/arm/configs/keystone_defconfig | 2 ++

1 file changed, 2 insertions(+)
arch/arm/configs/keystone_defconfig +0 -0
index 932ae40..c9b0d1b 100644
@@ -194,3 +194,5 @@ CONFIG_LEDS_TRIGGER_ONESHOT=y

CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y

arch/arm/configs/keystone_defconfig CONFIG_LEDS_TRIGGER_ONESHOT=y · line 198

Quoted 2 lines
arch/arm/configs/keystone_defconfig +2 -0
+CONFIG_KEYSTONE_IRQ=y
+CONFIG_GPIO_SYSCON=y

I will pick this one along with other three
patches for next merge window.

Quoted 4 lines

Thanks !!

Regards,
Santosh

Santosh,

Need to fix the typo in the subject that I have commented.

Signature · 2 lines
Murali Karicheri
Linux Kernel, Texas Instruments
author
#4 lore raw

PATCH 1/2 ARM: keystone_defconfig: enable dsp irq and gpio support

Hi Santosh,

Quoted 24 lines · Murali Karicheri
Quoted 23 lines · Santosh Shilimkar
Quoted 17 lines · Grygorii Strashko

Enable DSP IRQ controller and GPIOs support for Keystone 2.

Signed-off-by Grygorii Strashko <[email protected]>

---
arch/arm/configs/keystone_defconfig | 2 ++

1 file changed, 2 insertions(+)
arch/arm/configs/keystone_defconfig +0 -0
index 932ae40..c9b0d1b 100644
@@ -194,3 +194,5 @@ CONFIG_LEDS_TRIGGER_ONESHOT=y

CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y

arch/arm/configs/keystone_defconfig CONFIG_LEDS_TRIGGER_ONESHOT=y · line 198

Quoted 2 lines
arch/arm/configs/keystone_defconfig +2 -0
+CONFIG_KEYSTONE_IRQ=y
+CONFIG_GPIO_SYSCON=y

I will pick this one along with other three
patches for next merge window.

Quoted 6 lines
Quoted 2 lines

Thanks !!

Santosh,

Need to fix the typo in the subject that I have commented.

Would you like me to re-send dts patches with updated subj?

regards,
-grygorii

#5 lore raw

PATCH 1/2 ARM: keystone_defconfig: enable dsp irq and gpio support

Quoted 27 lines · Grygorii Strashko

Hi Santosh,

Quoted 24 lines · Murali Karicheri
Quoted 23 lines · Santosh Shilimkar
Quoted 17 lines · Grygorii Strashko

Enable DSP IRQ controller and GPIOs support for Keystone 2.

Signed-off-by Grygorii Strashko <[email protected]>

---
arch/arm/configs/keystone_defconfig | 2 ++

1 file changed, 2 insertions(+)
arch/arm/configs/keystone_defconfig +0 -0
index 932ae40..c9b0d1b 100644
@@ -194,3 +194,5 @@ CONFIG_LEDS_TRIGGER_ONESHOT=y

CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y

arch/arm/configs/keystone_defconfig CONFIG_LEDS_TRIGGER_ONESHOT=y · line 198

Quoted 2 lines
arch/arm/configs/keystone_defconfig +2 -0
+CONFIG_KEYSTONE_IRQ=y
+CONFIG_GPIO_SYSCON=y

I will pick this one along with other three
patches for next merge window.

Quoted 9 lines
Quoted 6 lines
Quoted 2 lines

Thanks !!

Santosh,

Need to fix the typo in the subject that I have commented.

Would you like me to re-send dts patches with updated subj?

No need to repost for that. I can fix that up while applying.

Regards,
Santosh